405 Method Not Allowed error from images directory

Some background: I'm implementing fusioncharts in APEX and the commercial version comes with an Save as Image capability. When the user wants to save the chart as an image, an aspx file is called which calls a POST method to the directory where the aspx file is located.
I store the aspx and its dependent files in a subfolder in the images directory and reference it using http://myserver/i/imagesaving/FusionChartsSave.aspx. Then when I try to save, I get 405 Method Not Allowed: 'the requested method POST is not allowed for the URL /i/imagesaving/FusionChartsSave.aspx.'
The aspx functions work for sure because I am able to successfully save to image when I put the files in IIS and reference the url to the aspx file that way.
My main concern is trying to keep all the files in the APEX environment which is Apache. Is there a place where I can perform the POST or configure apache to a directory that allows POST?
thanks!

Hi,
I am facing the same error, patch upgraded from 12 to 18.
URL iview was working on patch 12 , but after upgrade , one particular URL iview is not working.
Preview works fine, if I paste the URL in a new window it workf fine,
but when I try to access as an end user , the following error is faced
"HTTP Error 405 - The HTTP verb used to access this page is not allowed.
Internet Information Services (IIS)".
I have tried to use "Open in new Window" property, but it dint help.
Can anybody suggest.??
Thanks in anticipation,
Juhi

Similar Messages

HTTP/1.1 405 Method Not Allowed error while deploying application in EPMA

Hi All,
I have recently installed EPM 11.1.2.1 on a windows 2008 server with SQL Server 2008 database. I created a new HFM application and tried to deploy it, but the deployment gets aborted with the error "HTTP/1.1 405 Method Not Allowed" seen in the deployment log.
Any clue as to what might be the issue? Thanks in advance.

"405 Method Not Allowed" is most likely an IIS configuration issue. Please try reboot and try to redeploy again.
You need to check and ensure that both Roles and IIS components are installed correctly and that the HFM is functioning OK via IIS when browsing through it.
Also, by default IIS does not install ASP server scripting roles. To correct this by adding the ASP role in IIS
"If you are using Windows 2008, you must install ASP Role Services before installing EPM System products that require IIS. If you are using Windows 2008, you must install .NET 3.5 before installation of Data Relationship Management.
If IIS is chosen as the Web server during configuration, you must allow all unknown ISAPI extensions through the Internet Information Services Manager."
Please refer "Oracle Hyperion Enterprise Performance Management System Installation Start Here" guide page no: 64
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_start_here_11121.pdfhttp://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_start_here_11121.pdf

Cannot create application - 405 Method Not Allowed error

Installed 11.1.2.1. Tried using EPMA to deploy app. Getting abort with the Method Not Allowed Error. Tried using Classic and getting the same error. Some of the details says "Server Error in Application "DEFAULT WEB SITE/HFM", "The page you are looking for cannot be displayed because an invalid method (HTTP verb) is being used." Any thoughts on possible causes?

Hi Fsotto,
The below document would resolve the issue.
New Install on IIS 7, Cannot Access HFM from Workspace 404.3 Error in IIS Logs on HFM Web Server (Doc ID 1285684.1)
Hope this helps,
Please feel free to mark the answer as Helpful Answer/ Correct Answer should you find the relevant posting helpful so that it also helps us in keeping track of the answered queries.
Thank you,
Charles Babu J

HTTP 405 - Method not allowed error

Hi experts,
we are facing HTTP 405 error in document search functionality. The search is working fine but when we are trying to open the the document it shows 405 error that Method not allowed... Could any tell me the solution..?
With Regards,
Murugan Arumugam.
Hi All could any tell me the reason for above question?
Edited by: Murugan Arumugam on May 29, 2008 3:28 PM

Hi,
I am facing the same error, patch upgraded from 12 to 18.
URL iview was working on patch 12 , but after upgrade , one particular URL iview is not working.
Preview works fine, if I paste the URL in a new window it workf fine,
but when I try to access as an end user , the following error is faced
"HTTP Error 405 - The HTTP verb used to access this page is not allowed.
Internet Information Services (IIS)".
I have tried to use "Open in new Window" property, but it dint help.
Can anybody suggest.??
Thanks in anticipation,
Juhi

Always got this error "405 Method Not Allowed"

Hi,
I have create the mobile service with .NET backend and I always got "405 Method Not Allowed" error. Someone told me that I need to give table permission but there is no table in db.
There is no Data and API tab in dashboard in my mobile service.
I got this error message in fiddler -: message=The requested resource does not support http method 'OPTIONS'.
Regards,
Alex

Azure Mobile Services doesn't support the 'OPTIONS' method.
See here for reference:
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-how-to-use-server-scripts/#handle-methods
You say there is no data or api tab in your dashboard? Like these two are missing?
If so, would you email chrande 'at' microsoft.com with your app name? I'll look to see if there is any issues on our end.
-Chris

Setup resource template - getting 405 method not allowed

I'm attempting to migrate an app that ran under the old mod_plsql and 10g. Looking at 11g we've been testing out the apex listener on glassfish. However, we have methods that run from a client that uses post methods to send files (XML) to an oracle Pl/Sql procedure. The procedure grabs the blob out of a table that was configured in the mod_plsql for that location. Ideally - we'd use a web service, but don't have time to migrate everything yet. In order to get it running, we looked at the example of creating a resource template to handle these methods. We've got some Pl/Sql code to insert this into the original table and call the method. However - it's not working. The client is getting a 405 method not allowed error. That's it. There's a few lines in the server.log for the version and the driver - but no error messages. How does one debug this? What is generating the 405 error? Glassfish? If so, what logs tell you what the issue is? If it's apex listener, is there logs that can tell me where to find what the issue is calling the resource? Right now - considering installing the http server for oracle on this and just not using apex listener until we can migrate the code. It might be an easier migration to our new server. I'm hoping it's something simple...

There a number of standard verbs defined in HTTP:
GET- Retrieve a resource
POST- Submit new resource
PUT - update resource
DELETE - delete resource
When you enter a URL in a web browser it always uses the GET method, the method to retrieve the resource.
In your example Firefox is attempting to a do a GET on https://apex.oracle.com/pls/apex/orange/TestPOST
but you have not defined a GET handler for this resource, only a POST handler. ORDS then tells you that the GET method is not supported on the resource, which is the correct behaviour.
If you want to test the POST method from within a browser then you need to use JavaScript and perform an XMLHttpRequest and configure it to use the 'POST' method, for an example see the ORDS Developer guide:
REST Data Services Developers Guide

405 method not allowed in WS invocation

Hi all,
I hope that someone can help me out with the following problem:
I am invoking a 3rd party web service from an async BPEL process (vers. 10.1.3.3).
I get a +405 method not allowed+ error back in the console.
I have access from my BPEL server to the web server, and the web service is up and running (can be invoked with SOAP UI).
Searching the web seems to suggest that perhaps I am running into a security configuration issue.
Can anyone verify or eloborate on that?
And most importantly, come up with ideas for how I can fix the problem.
Thank you in advance.
Regards,
Aagaard
Edited by: Aagaard on Jul 20, 2009 2:12 PM
I have set up a TCPMon on my BPEL server. From there I am unable to start listening on the connection.
I get a iava.net.BindException: Connection refused.
If I attempt to initiate the web service through the TCPMon - i.e. with no BPEL involved - I get a 405 error back.
Any thoughts, or hints?
Anybody?

Hi Anirudh,
Thanks for answering.
I will take it up with my network admin.
Regards,
Aagaard
Edited by: Aagaard on Jul 21, 2009 7:54 AM
BTW: I am able to listen to the connection. The problem was that I had set my listen port to 80 as well as the port.
Changing the listen port to 1234 helped.
Now I am getting an Unknownhost exception. I am asuming that Anirudh's comment is still valid, and will have a talk with my network admin.

POST to SharePoint Online REST API - 405 Method Not Allowed

Good afternoon,
I am writing C# with the intention of uploading a file to a document library using the REST API.
The code must run on an on-premise machine and the target SharePoint site is in SharePoint Online (Office 365 E-plan). It has to handle large files, so CSOM is not an option.
I have successfully tested a few different "get" messages, so I believe the authentication part is working. However, so far I have no such luck with POST.
In fiddler, my most recent attempt looks like this (I redacted the parts in <> because I'm not sure if they are sensitive somehow):
POST http://org.sharepoint.com/sites/site/_api/web/GetFolderByServerRelativeUrl('Documents')/Files/add(url='test2.txt',overwrite=true) HTTP/1.1
Accept: application/json;odata=verbose
X-RequestDigest: <digest value>,15 Jan 2014 17:48:49 -0000
BinaryStringRequestBody: true
Host: org.sharepoint.com
Content-Length: 6
Expect: 100-continue
stuff!
Seems like it should work, but the result is "301 Moved Permanently." This request is immediately followed by this one:
GET https://org.sharepoint.com/sites/site/_api/web/GetFolderByServerRelativeUrl('Documents')/Files/add(url='test2.txt',overwrite=true) HTTP/1.1
Accept: application/json;odata=verbose
X-RequestDigest: <formdigest>,15 Jan 2014 18:01:51 -0000
BinaryStringRequestBody: true
Host: org.sharepoint.com
Cookie: FedAuth=<cookiestuff>; rtFA=<cookiestuff>
Response:
HTTP/1.1 405 Method Not Allowed
Cache-Control: private, max-age=0
Transfer-Encoding: chunked
Content-Type: application/json;odata=verbose;charset=utf-8
Expires: Tue, 31 Dec 2013 18:01:52 GMT
Last-Modified: Wed, 15 Jan 2014 18:01:52 GMT
Server: Microsoft-IIS/7.5
X-SharePointHealthScore: 0
X-SP-SERVERSTATE: ReadOnly=0
SPClientServiceRequestDuration: 25
X-AspNet-Version: 4.0.30319
SPRequestGuid: dd936a9c-f4fc-a05d-27e1-2c948f0eb575
request-id: dd936a9c-f4fc-a05d-27e1-2c948f0eb575
X-FRAME-OPTIONS: SAMEORIGIN
X-Powered-By: ASP.NET
MicrosoftSharePointTeamServices: 16.0.0.2308
X-Content-Type-Options: nosniff
X-MS-InvokeApp: 1; RequireReadOnly
P3P: CP="ALL IND DSP COR ADM CONo CUR CUSo IVAo IVDo PSA PSD TAI TELo OUR SAMo CNT COM INT NAV ONL PHY PRE PUR UNI"
Date: Wed, 15 Jan 2014 18:01:51 GMT
128
{"error":{"code":"-1, Microsoft.SharePoint.Client.ClientServiceException","message":{"lang":"en-US","value":"The HTTP method 'GET' cannot be used to access the resource 'Add'. The operation type of the resource is specified as 'Default'. Please use correct HTTP method to invoke the resource."}}}
0
So it looks to me as if my request is being redirected to the same address but with a "GET" method rather than "POST," resulting in the 405 Method Not Allowed error because "add" needs POST.
I appreciate any insight you can offer.

Mkay, perhaps I should rephrase:
I want to synchronize a SharePoint Online library with a local file share. There are a large quantity of files, and many of them are large (actually it's all too large to fit in one SharePoint Online site collection due to the 100gb limit, but I'll
deal with that separately).
The approach I was working on here was to create a C# method basically like this: UploadFile(File, Destination, username, password). I would use this method in the script component of an SSIS package which would run on a server and push the files
up to SPO, but right now I'm just testing it as a console application.
I got the CSOM methods working, but obviously that won't work because the files are too large. Above is what's happening with the REST version.
Can anyone see what's wrong with my REST calls - why is it being redirected as a GET request? Is this even possible?

405 Method Not Allowed in Web Performance Chat

Hi,
I have created a new Web Performance Chat and I am using 2 url to test. The 2 url's are
http://localhost14597/Login.aspx
https://www.google.co.in
When ever I am using localhost, its working fine. If I use any website, the result shows "405 Method Not Allowed" error. I have attached screenshots of the error for easier understanding of the issue.
Can you please let me know what could be the issue.
Thanks in advance.
Regards,
Aditya

Hi Aditya,
Like Adrian's suggestion, change the "method =Get" would resolve this issue.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MySQL Connection - Select Database - HTTP Error Code 405 Method Not Allowed?

We've set up a MySQL database with our host and can connect to that, and create, edit, delete tables using HeidiSQL, without a problem.
However when we attempt to set up the connection in the Databases tab of our Applications panel in Dreamweaver we receive the following error:
HTTP Error Code 405 Method Not Allowed
We have entered the following in the MySQL Connection box:
Name: <name of our connection>
Server: <IP address of our database>
Username: <our database username>
Password: <our database password>
Database:
When we click the "Select" option next to the Database field, that's when we receive the above mentioned error.
We noticed that there was a fix posted by Adobe at:
http://www.macromedia.com/support/dreamweaver/ts/documents/err405.htm
...but that link is long since dead, however it does seem to indicate that Adobe are/were aware of this issue.
Can anyone help? We're trying to move from Classic ASP / MSSQL to PHP / MySQL but have hit a barrier right from the off, which isn't very encouraging. Hope someone can ease our concerns with PHP and MySQL.
Much appreciated.
NJ

Thank you SnakEyez02.
I had the Testing Server set to Local/Network but didn't have MySQL installed locally. Changed that setting to FTP and it picked up on the database correctly.
When using MSSQL it doesn't matter whether you choose Local/Network or FTP it just picks up the online database regardless. I guess this must just be a difference between it and MySQL.
Thanks for the advice. Much appreciated.
NJ

Jquery Ajax calling code-behind Error - 405 (Method Not Allowed)

Hi,
I am working on a web form with Jquery, Ajax to call a code-behind (webservice), but I get the following error: 405 (Method Not Allowed).
See code...
../Ops/new-item.aspx
<%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="new-item.aspx.cs" Inherits="WebAppFrekuency.Ops.new_item" %>
<asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server">
<script src="../Scripts/js-new.js" type="text/javascript"></script>
<script src="../Scripts/jquery-1.11.1.js" type="text/javascript"></script>
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">
<div id="message">
Mensaje
</div>
<div id="form">
<input type="text" id="barcode" name="barcode" /> <button id="submit" type="button">Crear</button>
</div>
</asp:Content>
../Scripts/js-new.js
$(document).ready(function () {
//Informacion de contacto
var error = false;
var message = "";
$("#submit").click(function () {
if ($("#barcode").val() == "") {
$("#barcode").css("border", "1px solid red");
error = true;
message = "Error - El campo codigo de barras es obligatorio";
else {
$("#barcode").css("border", "");
message = "";
if (error == false) {
var formData = '{name:"' + $("#barcode").val() + '"}';
// process the form
$.ajax({
type: "POST", // define the type of HTTP verb we want to use (POST for our form)
url: "new-item.apsx/Search", // the url where we want to POST
data: formData, // our data object
contentType: "application/json; charset=utf-8",
dataType: "json", // what type of data do we expect back from the server
success: OnSuccess,
failure: function (response) {
alert("Falla - " + response.d);
// using the done promise callback
event.preventDefault();
} else { alert(message); }
function OnSuccess(response) {
alert("Exito - " + response.d);
../Ops/new-item.aspx.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Net;
using System.IO;
namespace WebAppFrekuency.Ops
public partial class new_item : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
[System.Web.Services.WebMethod]
public static string Search(string epc)
return "YES";
Any ideas why I am getting this error?
Thanks,

I read the article, but problem persists, next is the web.config file
<?xml version="1.0"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices"
connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices"
enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false"
maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10"
applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear/>
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/"/>
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear/>
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<webServices>
<protocols>
<add name="HttpGet"/>
<add name="HttpPost"/>
</protocols>
</webServices>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
</customHeaders>
</httpProtocol>
</system.webServer>
</configuration>
and the machine.config file looks like
<?xml version="1.0"?>

<configuration>
<configSections>
<section name="oracle.dataaccess.client" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="appSettings" type="System.Configuration.AppSettingsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" restartOnExternalChanges="false" requirePermission="false" />
<section name="connectionStrings" type="System.Configuration.ConnectionStringsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="mscorlib" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="runtime" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="assemblyBinding" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="satelliteassemblies" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="startup" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="system.codedom" type="System.CodeDom.Compiler.CodeDomConfigurationHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data" type="System.Data.Common.DbProviderFactoriesConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.dataset" type="System.Configuration.NameValueFileSectionHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" restartOnExternalChanges="false" />
<section name="system.data.odbc" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.oledb" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.oracleclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.sqlclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.diagnostics" type="System.Diagnostics.SystemDiagnosticsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.runtime.remoting" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="system.windows.forms" type="System.Windows.Forms.WindowsFormsSection, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="windows" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="uri" type="System.Configuration.UriSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="system.runtime.caching" type="System.Runtime.Caching.Configuration.CachingSectionGroup, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="memoryCache" type="System.Runtime.Caching.Configuration.MemoryCacheSection, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
</sectionGroup>
<sectionGroup name="system.xml.serialization" type="System.Xml.Serialization.Configuration.SerializationSectionGroup, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="schemaImporterExtensions" type="System.Xml.Serialization.Configuration.SchemaImporterExtensionsSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="dateTimeSerialization" type="System.Xml.Serialization.Configuration.DateTimeSerializationSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="xmlSerializer" type="System.Xml.Serialization.Configuration.XmlSerializerSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
<sectionGroup name="system.net" type="System.Net.Configuration.NetSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="authenticationModules" type="System.Net.Configuration.AuthenticationModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="connectionManagement" type="System.Net.Configuration.ConnectionManagementSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="defaultProxy" type="System.Net.Configuration.DefaultProxySection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="mailSettings" type="System.Net.Configuration.MailSettingsSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="smtp" type="System.Net.Configuration.SmtpSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="requestCaching" type="System.Net.Configuration.RequestCachingSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="settings" type="System.Net.Configuration.SettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="webRequestModules" type="System.Net.Configuration.WebRequestModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.runtime.serialization" type="System.Runtime.Serialization.Configuration.SerializationSectionGroup, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="dataContractSerializer" type="System.Runtime.Serialization.Configuration.DataContractSerializerSection, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.serviceModel" type="System.ServiceModel.Configuration.ServiceModelSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="behaviors" type="System.ServiceModel.Configuration.BehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="bindings" type="System.ServiceModel.Configuration.BindingsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="client" type="System.ServiceModel.Configuration.ClientSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="comContracts" type="System.ServiceModel.Configuration.ComContractsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="commonBehaviors" type="System.ServiceModel.Configuration.CommonBehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
<section name="diagnostics" type="System.ServiceModel.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="extensions" type="System.ServiceModel.Configuration.ExtensionsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="machineSettings" type="System.ServiceModel.Configuration.MachineSettingsSection, SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
<section name="protocolMapping" type="System.ServiceModel.Configuration.ProtocolMappingSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="serviceHostingEnvironment" type="System.ServiceModel.Configuration.ServiceHostingEnvironmentSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineToApplication" />
<section name="services" type="System.ServiceModel.Configuration.ServicesSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="standardEndpoints" type="System.ServiceModel.Configuration.StandardEndpointsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="routing" type="System.ServiceModel.Routing.Configuration.RoutingSection, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<section name="tracking" type="System.ServiceModel.Activities.Tracking.Configuration.TrackingSection, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</sectionGroup>
<sectionGroup name="system.serviceModel.activation" type="System.ServiceModel.Activation.Configuration.ServiceModelActivationSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="diagnostics" type="System.ServiceModel.Activation.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="net.pipe" type="System.ServiceModel.Activation.Configuration.NetPipeSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="net.tcp" type="System.ServiceModel.Activation.Configuration.NetTcpSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.transactions" type="System.Transactions.Configuration.TransactionsSectionGroup, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null">
<section name="defaultSettings" type="System.Transactions.Configuration.DefaultSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" />
<section name="machineSettings" type="System.Transactions.Configuration.MachineSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
</sectionGroup>
<sectionGroup name="system.web" type="System.Web.Configuration.SystemWebSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="anonymousIdentification" type="System.Web.Configuration.AnonymousIdentificationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authentication" type="System.Web.Configuration.AuthenticationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authorization" type="System.Web.Configuration.AuthorizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="browserCaps" type="System.Web.Configuration.HttpCapabilitiesSectionHandler, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="clientTarget" type="System.Web.Configuration.ClientTargetSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="compilation" type="System.Web.Configuration.CompilationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="customErrors" type="System.Web.Configuration.CustomErrorsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="deployment" type="System.Web.Configuration.DeploymentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" />
<section name="deviceFilters" type="System.Web.Mobile.DeviceFiltersSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="fullTrustAssemblies" type="System.Web.Configuration.FullTrustAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="globalization" type="System.Web.Configuration.GlobalizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="healthMonitoring" type="System.Web.Configuration.HealthMonitoringSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="hostingEnvironment" type="System.Web.Configuration.HostingEnvironmentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="httpCookies" type="System.Web.Configuration.HttpCookiesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpHandlers" type="System.Web.Configuration.HttpHandlersSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpModules" type="System.Web.Configuration.HttpModulesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpRuntime" type="System.Web.Configuration.HttpRuntimeSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="identity" type="System.Web.Configuration.IdentitySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="machineKey" type="System.Web.Configuration.MachineKeySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="membership" type="System.Web.Configuration.MembershipSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="mobileControls" type="System.Web.UI.MobileControls.MobileControlsSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="pages" type="System.Web.Configuration.PagesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="partialTrustVisibleAssemblies" type="System.Web.Configuration.PartialTrustVisibleAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="processModel" type="System.Web.Configuration.ProcessModelSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" allowLocation="false" />
<section name="profile" type="System.Web.Configuration.ProfileSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="protocols" type="System.Web.Configuration.ProtocolsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToWebRoot" />
<section name="roleManager" type="System.Web.Configuration.RoleManagerSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="securityPolicy" type="System.Web.Configuration.SecurityPolicySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sessionPageState" type="System.Web.Configuration.SessionPageStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="sessionState" type="System.Web.Configuration.SessionStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="siteMap" type="System.Web.Configuration.SiteMapSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="trace" type="System.Web.Configuration.TraceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="trust" type="System.Web.Configuration.TrustSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="urlMappings" type="System.Web.Configuration.UrlMappingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="webControls" type="System.Web.Configuration.WebControlsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webParts" type="System.Web.Configuration.WebPartsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webServices" type="System.Web.Services.Configuration.WebServicesSection, System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="xhtmlConformance" type="System.Web.Configuration.XhtmlConformanceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<sectionGroup name="caching" type="System.Web.Configuration.SystemWebCachingSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="cache" type="System.Web.Configuration.CacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCache" type="System.Web.Configuration.OutputCacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCacheSettings" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sqlCacheDependency" type="System.Web.Configuration.SqlCacheDependencySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere" />
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
</sectionGroup>
<sectionGroup name="system.xaml.hosting" type="System.Xaml.Hosting.Configuration.XamlHostingSectionGroup, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="httpHandlers" type="System.Xaml.Hosting.Configuration.XamlHostingSection, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</sectionGroup>
<section name="system.webServer" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</configSections>
<configProtectedData defaultProvider="RsaProtectedConfigurationProvider">
<providers>
<add name="RsaProtectedConfigurationProvider" type="System.Configuration.RsaProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses RsaCryptoServiceProvider to encrypt and decrypt" keyContainerName="NetFrameworkConfigurationKey" cspProviderName="" useMachineContainer="true" useOAEP="false" />
<add name="DataProtectionConfigurationProvider" type="System.Configuration.DpapiProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses CryptProtectData and CryptUnProtectData Windows APIs to encrypt and decrypt" useMachineProtection="true" keyEntropy="" />
</providers>
</configProtectedData>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Data.Entity" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Web" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
<add name="LocalMySqlServer" connectionString="" />
<add name="OraAspNetConString" connectionString=" " />
</connectionStrings>
<system.data>
<DbProviderFactories>
<add name="Oracle Data Provider for .NET" invariant="Oracle.DataAccess.Client" description="Oracle Data Provider for .NET" type="Oracle.DataAccess.Client.OracleClientFactory, Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
<add name="Microsoft SQL Server Compact Data Provider 4.0" invariant="System.Data.SqlServerCe.4.0" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
<add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
<add name="Microsoft SQL Server Compact Data Provider" invariant="System.Data.SqlServerCe.3.5" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=3.5.1.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
</DbProviderFactories>
</system.data>
<system.serviceModel>
<extensions>
<behaviorExtensions>
<add name="persistenceProvider" type="System.ServiceModel.Configuration.PersistenceProviderElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowRuntime" type="System.ServiceModel.Configuration.WorkflowRuntimeElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="enableWebScript" type="System.ServiceModel.Configuration.WebScriptEnablingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webHttp" type="System.ServiceModel.Configuration.WebHttpElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="serviceDiscovery" type="System.ServiceModel.Discovery.Configuration.ServiceDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="endpointDiscovery" type="System.ServiceModel.Discovery.Configuration.EndpointDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="etwTracking" type="System.ServiceModel.Activities.Configuration.EtwTrackingBehaviorElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="routing" type="System.ServiceModel.Routing.Configuration.RoutingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="soapProcessing" type="System.ServiceModel.Routing.Configuration.SoapProcessingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowIdle" type="System.ServiceModel.Activities.Configuration.WorkflowIdleElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowUnhandledException" type="System.ServiceModel.Activities.Configuration.WorkflowUnhandledExceptionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="bufferedReceive" type="System.ServiceModel.Activities.Configuration.BufferedReceiveElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="sendMessageChannelCache" type="System.ServiceModel.Activities.Configuration.SendMessageChannelCacheElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="sqlWorkflowInstanceStore" type="System.ServiceModel.Activities.Configuration.SqlWorkflowInstanceStoreElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowInstanceManagement" type="System.ServiceModel.Activities.Configuration.WorkflowInstanceManagementElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior" type="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior, Microsoft.VisualStudio.Diagnostics.ServiceModelSink, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</behaviorExtensions>
<bindingElementExtensions>
<add name="webMessageEncoding" type="System.ServiceModel.Configuration.WebMessageEncodingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="context" type="System.ServiceModel.Configuration.ContextBindingElementExtensionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="byteStreamMessageEncoding" type="System.ServiceModel.Configuration.ByteStreamMessageEncodingElement, System.ServiceModel.Channels, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="discoveryClient" type="System.ServiceModel.Discovery.Configuration.DiscoveryClientElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</bindingElementExtensions>
<bindingExtensions>
<add name="wsHttpContextBinding" type="System.ServiceModel.Configuration.WSHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="netTcpContextBinding" type="System.ServiceModel.Configuration.NetTcpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="webHttpBinding" type="System.ServiceModel.Configuration.WebHttpBindingCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="basicHttpContextBinding" type="System.ServiceModel.Configuration.BasicHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</bindingExtensions>
<endpointExtensions>
<add name="dynamicEndpoint" type="System.ServiceModel.Discovery.Configuration.DynamicEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="discoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.DiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="udpDiscoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpDiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="announcementEndpoint" type="System.ServiceModel.Discovery.Configuration.AnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="udpAnnouncementEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpAnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowControlEndpoint" type="System.ServiceModel.Activities.Configuration.WorkflowControlEndpointCollectionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webHttpEndpoint" type="System.ServiceModel.Configuration.WebHttpEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webScriptEndpoint" type="System.ServiceModel.Configuration.WebScriptEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</endpointExtensions>
</extensions>
<client>
<metadata>
<policyImporters>
<extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
</policyImporters>
<wsdlImporters>
<extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
</wsdlImporters>
</metadata>
</client>
<tracking>
<profiles>
<trackingProfile name="">
<workflow activityDefinitionId="*">
<workflowInstanceQueries>
<workflowInstanceQuery>
<states>
<state name="*" />
</states>
</workflowInstanceQuery>
</workflowInstanceQueries>
<activityStateQueries>
<activityStateQuery activityName="*">
<states>
<state name="Faulted" />
</states>
</activityStateQuery>
</activityStateQueries>
<faultPropagationQueries>
<faultPropagationQuery faultSourceActivityName="*" faultHandlerActivityName="*" />
</faultPropagationQueries>
</workflow>
</trackingProfile>
</profiles>
</tracking>
<commonBehaviors>
<endpointBehaviors>
<Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
</endpointBehaviors>
<serviceBehaviors>
<Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
</serviceBehaviors>
</commonBehaviors>
</system.serviceModel>
<system.web>
<processModel autoConfig="true" />
<httpHandlers />
<membership>
<providers>
<add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
<add name="MySQLMembershipProvider" type="MySql.Web.Security.MySQLMembershipProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Clear" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
</providers>
</membership>
<profile>
<providers>
<add name="OracleProfileProvider" type="Oracle.Web.Profile.OracleProfileProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
<add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="MySQLProfileProvider" type="MySql.Web.Profile.MySQLProfileProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
</providers>
</profile>
<roleManager>
<providers>
<add name="OracleRoleProvider" type="Oracle.Web.Security.OracleRoleProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="MySQLRoleProvider" type="MySql.Web.Security.MySQLRoleProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
</providers>
</roleManager>
<siteMap>
<providers>
<add name="OracleSiteMapProvider" type="Oracle.Web.SiteMap.OracleSiteMapProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" securityTrimmingEnabled="true" />
</providers>
</siteMap>
<webParts>
<personalization>
<providers>
<add name="OraclePersonalizationProvider" type="Oracle.Web.Personalization.OraclePersonalizationProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
</providers>
</personalization>
</webParts>
<healthMonitoring>
<providers>
<add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
</providers>
</healthMonitoring>
<webServices>
<protocols>
<add name="HttpSoap"/>
<add name="HttpPost"/>
<add name="HttpGet"/>
<add name="Documentation"/>
</protocols>
</webServices>
</system.web>
</configuration>
Thanks,
Mario

Apache reports error 405 Method Not Allowed

Hello, I have been attempting AJAX techniques on a portlet and am getting a weird error message in apache's access log. I checked the logs because the requestObject.open method I am using in some javascript was not returning any results.
Apache is reporting error '405 Method Not Allowed' on my attempts to connect to a servlet from a portlet.
I have found doc 427497.1 which gives three steps to solving this. The steps are to fix your hosts file, make sure your url does not resolve to a public address, and restart OC4J. But my hosts file is correct, and the url I have does not resolve to a public address.
I'm following the steps in Oracle's "Building Highly Interactive Portlets With AJAX".
This ajax test is being run deployed on OAS; not from JDeveloper. This OAS is infrastructure and middle-tier on same box. Portal, Forms and Reports are working great.
When I access the servlets url directly from my browser, it works. This error only happens when I attempt to access the servlet from a portlet.
Any ideas would be appreciated.

Reposted in Portal - General.
Sorry.

Http error 405 method not allowed sap content server windows

Hi Expert,
we have install sap content server 6.5 on microsoft windows 2012 using
IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
create repository error "http error 405 method not allowed"
Oac0 --> tab Create --> Content rep.
I have implement note number 1704365 - IIS roles not created by
default when installing Content Server on Windows 2008. even though it
is not applicable to our IIS.
when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
it always direct us to download file not showing the version number.
is there any solution for this issue?
Thanks a lot,

Dear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B

405 Method Not Allowed -- XI AS2 Adapter error

Hi All,
I am getting the folloeing error in AS2 Adapter "405 Method Not Allowed". Please let me know ablout the latest note etc to resolve the same as note no. 906435 is quite old and is unable to resolve the same.
Thanks in Advance.
With regards,
Gaurav

Is your computer directly connected to internet, or do you have make some proxy settings ?

Content Server HTTP error: 405 Method Not Allowed in CSADMIN transaction

Hello,
After installing the content server, when configuring in CSadmin
transaction, when we try to save the new settings, I get the errror
HTTP error: 405 Method Not Allowed.
The operating system is W2008 R2 SP1. The storage type is filesystem, we do not use the MAXDB database. However, I have made so many tries, that, finally Ihave installed the system with database, although we are not going to use it (we have more content servers installed with database and they are working fine). Despite of this, it doesn't work either. The error message is the same.
The Content Server release is 6.40
Thanks and best regards,
Ana

I have seen this issue on Windows 2008 R2 with IIS 7.5. This was the solution of mine
The error 405 appears because you have installed WebDav IIS Role in IIS 7.5. Please uninstall that particular role.
Regards,
Subhash

405 Method Not Allowed error from images directory

Similar Messages

Maybe you are looking for