40E220U LCD TV Start-Up Menu Every Power Up

I purchased a 40E220U LCD TV at Best Buy for the Thanksgiving deal.
Every time I turn on the TV I have to go through the initial start up menu. (English/spanish, home/retail, cable/antenna, channel search) It never saves this information.
Anyone know how I can avoid this?

If it does everytime you turn on the TV, I would suggest to reset the unit back to factory settings then after the reset procced to the process of initial setup. Once you have completed the process. Try to turn off the TV unplug the power cord then wait for like atleast 5secs before you will plug it back in and turn it on. If it does the same thing then it is a H/W related issue, specifically mainboard failure.

Similar Messages

My iMac 27" is 2 years old. The screen just start to sleep every 2-3 minutes and then one has to reboot it. I bought the unit from Incredible Connections in South Africa. They sent it to the South African distributors Core. They report LCD screen defect?

My iMac 27" is 2 years old. The screen just start to sleep every 2-3 minutes and then one has to reboot it. I bought the unit from Incredible Connections in South Africa. They sent it to the South African distributors Core. They report LCD screen defect and charged me R7500-00 to replace the screen and sent it back after 4 weeks.
It does not go to sleep anymore; but when switch on; there appears a flickering band of lines on the screen which last for about 20 seconds before the machines starts to work normally.
It seems there is still a screen problem!
We had to send it back again.
The other problem is that you just get no communication out of the Core workshop and you cannot communicate with the technician.
They had still not provide a technical report in spite of repeated discussion with the manager of Incredible Connections.

Sounds like the graphics card might be the problem. Run the Hardware Test in extended mode. If you get an error it can be trusted, but getting a negative may not be all that meaningful. Bring it back to them and let them check out the machine again.
http://support.apple.com/kb/ht1509

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT204204 My phone crashed after updating it to IOS 8. I can't use it cause its stucked on the start up menu, the apple logo with black background.

Hi to all,
I hope someone can help me. My phone crashed after updating it to IOS 8.3. I can't use it cause its stucked on the start up menu, the apple logo with black background. Even when I restart my phone, it is still stuck on the start up menu, the black background with apple logo in the middle.

Slone,
I finally decided to turn this annoyance into an opportunity. After a lot of experimenting I found that my iPad was just fine under 7.1 if I simply restored it as new. I have a lot of time on my hands and I had 1424 apps on my iPad! This is why every attempt to restore took so long.
I decided to restore as new, spend a day restoring the apps I really used. Doing so gave me a quick iPad with only bout a quarter of the storage used.
Granted it was a pain in the arse, but I wrote it off as in the old days when you had to do this with windows 95 just to keep a stable system.
I DO have some data in a few files of the now unused backup but a quick google search finds a couple Mac programs out there that will allow you go extract audio recordings, app data files etc. from the backup. I'll do that someday if I even miss the files I've probably forgotten that are there.
Anyway, there was nothing wrong with my hardware. I think there were just some troublesome setup items that 7.1 didn't like. Once set up as new, the ipad was fine.
Good luck!

How do I get my system to auto start-up after a power failure?

Hi, I have a Lenovo 3000 J200 desktop that I'm using as a file server. Currently I have to physically press the start button after a power failure, before the system will boot. This isn't much help if the power dips in the night or when I'm away..
Is there a setting in the BIOS or similar that I can set to automatically boot up when power is restored to the box?
Many thanks
Adrian

Too bad no one offered a solution. I tried to use the "Wake on Event" to have the PC boot itself, but the only option is a one-time event. This is an unacceptable oversight on Lenovo's part. Missing is the option to have this a recurring event such as every day. Others report the same frustration. I have this H3 PC in a remote location 1200 miles away, and when AC power loss occurs, I have to travel a great distance just to push the power button.

Firefox does not show up in the start up menu after dowloading

Every time I download Firefox I look in the start up menu and I can't find any file of Firefox. I have to download it every time I want to use the internet.

I'm not sure why you don't have a "Mozilla Firefox" desktop shortcut after you download and install Firefox. You said that Firefox does not appear in the "startup" menu. You should be looking in the Start '''All Programs''' list for a Mozilla Firefox icon (you may need to scroll up or down). If you don't see it, open the C:\Program Files (x86)\Mozilla Firefox folder and then right-click on firefox.exe and choose either "Pin to Start Menu" or "Send to -> Desktop (create shortcut) if you want a Desktop shortcut and it's missing.

Sun Netra 240 runs max level POST every power up

Hello, I have a Sun Netra 240 server box that on every power up runs the max level POST which takes a good 5 minutes to complete. I have the power key switch set to the normal position and not DIAG mode and I have the Diag-level set to "off" for the system configuration settings. Nothing gets reported as an error during the POST but it still continues to run full POST on every power cycle. Can anyone tell me what else to check or look at to make it stop? Thanks in advance.

I have no way to get a copy of this from the screen so I had to write it all down and hand jam it in. I only put my values, not the default values. These have not been changed though so I don't think it is any of these settings. Just for some background this server has been fine for the past year or so and then one day it just started doing this out of the blue.
test-args -
diag-passes 1
asr-policy normal
local-mac-address? true
fcode-debug false
silent-mode? false
scsi-initiator-id 7
oem-logo -
oem-logo? false
oem-banner -
oem-banner? false
ansi-terminal true
screen-#col 80
screen-#row 34
ttyb-rts-dtr-off false
ttyb-ignore-cd true
ttya-rts-dtr-off false
ttya-ignore-cd true
ttyb mode 9600,8,n,1,-
ttya mode 9600,8,n,1,-
output-device screen
input-device keyboard
auto-boot-on-error false
load base 16384
auto-boot? true
boot-command boot
diag-device disk
use-NVRAMRC true
security mode command
NVRAMRC devalias radbkup
security-#bad-logins 2
post-trigger power-on-reset
diag-script none
diag-level off
diag-switch false
obdiag-trigger power-on-reset
error-reset-recovery boot
Edited by: 941057 on Jun 15, 2012 2:38 PM

My ipod nano 6th generation does not start on pressing the sleep/pause button or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

i have an ipod nano 6th generation .version 1.2 yesterday i restored it on i tunes using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok after starting by connecting to power and then disconnecting the cord.
what would be the reason and what to do?>

Call Apple Care as you are still under warranty.

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no change

Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

IT SEEMS LIKE MY IPOD 4GEN SCREEN IS FROZEN I RESTORED AND RE STARTED IT BUT EVERY TIME I TOUCH THE SCREEN TO UNLOCK IT OR SOMETHING IT WONT RESPOND SOMEONE HELP!!

IT SEEMS LIKE MY IPOD 4GEN SCREEN IS FROZEN I RESTORED AND RE STARTED IT BUT EVERY TIME I TOUCH THE SCREEN TO UNLOCK IT OR SOMETHING IT WONT RESPOND SOMEONE HELP!! IT JUST STARTED DOING THIS A COUPLE OF DAYS AGO AND I DONT KNOW WHY ILL TRY TO SLIDE THE SLIDE BUTTON TO UNLOCK MY IPOD BUT IT WONT EVEN LET ME DO THAT ITS LIKE EVERY TIME I TOUCH THE SCREEN TO DO SOMETHING IT DOSENT RESPOND SOMEONE HELP PLEASE

Please don't shout.
Has the iPod ever been jailbroke?

How can i fix start botton ? Every time i need to press more to work.

How can i fix start botton ? Every time i need to press more to work.

Are you using any fonts in this file that you don't normally use?
I'd also try the script at Adobe Community: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK. and the tool at Repair corrupt InDesign Adobe files on Mac OS X

I downloaded the IOS7 and I recently started seeing that every tim I revived a message everyone would be able to see it, I tired looking for the I'm not sure what to call it in messages, where no one can read my messages unless I open my phone. Any help?

I downloaded the IOS7 and I recently started seeing that every tim I revived a message everyone would be able to see it, I tired looking for the I'm not sure what to call it in messages, where no one can read my messages unless I open my phone. Any help? I really don't want anyone ready what I get from other people, its emrassing, when I get a text from someone and it's personal, and someone could go look at my phone while its charging and read the message. Please help!!!! How do I disable it, If I can.

Hello KenyaJohn,
You may benefit from disabling Show on Lock Screen for Messages and Mail in Settings -> Notification Center -> Mail/Messages.
You can disable Show on Lock Screen for a particular app in Settings > Notification Center > <app name>.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
Cheers,
Allen

I have Google as my default home page in Firefox and the Google proser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

I have Google as my default home page in Firefox and the Google browser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

Do you have the FastStart extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have Google as my default home page in Firefox and the Google browser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

I have Google as my default home page in Firefox and the Google browser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

Do you have the FastStart extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Yosemite - create space in start up menu

My computers knowledge is limited to say the least. I thought i up loaded Yosemite back in November to my Mac Book Pro, but i didn't. It states i do have enough space in my start up menu. When i go to systems preference, all thats there is a mackintosh HD. i click left i click right but there is no delete in the menu. how do i create space in my start up menu.

I think i have cracked this on my own - just by reading other peoples questions - but thanks

40E220U LCD TV Start-Up Menu Every Power Up

Similar Messages

Maybe you are looking for