/410 Ann Reg Inc getting wrong
Dear Mates,
Getting annual salary /410 is wrong in RT table:
1 Employee has been hired on 01.04.2014
2 Running payroll for him 01.04.2014 but at time of calculating annual salary /410 in RT table system is cumulating like 01.04.2014 to 28.02.2015. I'm not getting why it's cumulating up to 28.02.2015.
For more clarification kindly find below screen shots.
Info type 0000:
Payslip:
RT table:
INHRA function in payroll log:
Even I've generated "Generate Calendar for Cumulations"
Ur's: Mohan
Hi,
Can you please check your payroll periods table V_T549Q.
Best Regards
Similar Messages
-
Why do i get "wrong password" when i try to log on to the wifi on my ipad 3?
I have 2 laptops, 2 ipones (5 and 4s, running on ver 6.1.4), an ipad mini and an ipad 3 in my home.
I'm using my wifi successfuly with every device except for my ipad 3.
on the "wireless" tab, i can see the network, i'm trying to type the password but i keep on getting "wrong password".
The ipad can use wifi in other places with passwords.
I checked how im writing and tried to type again on other devices, that's not the problem. Its not a problem with capitals or o-0 or something like that.
I've tried reseting the network settings, reseting my router, reseting my ipad (pressing "off button" + "home button"). I've tried changing password on my router, without succuess.
that is really annoing, you're paying a lot for something that's suppose to work perfectly, and you get problems like that.
I really need wifi on my ipad, and I've searched forums all over the internet for a solution. it turnes out that a lot of people are experiencing the same problem, whitout a proper solution.
please helpRestore the iOS software.
Transfer purchases into iTunea, backup your iPad, restore to factory settings, restore from the backup and sync with iTunes and then try again.
iTunes: Restoring iOS software - Support - Apple -
Condition value of Tax gets wrongly added to Total value of Contract
Hi All,
I'm currently investigating an issue where there are 2 line items in an SAP Sales Contract. There is a human error in the second line where the billing end date is less than billing start date in the billing plan. Consequently, the second line has null Outgoing target value.
However, the header Total value in the Contract gets wrongly calculated as Basic condition value of 1st line + Condition value of tax condition type of line one due to this. When I modify the billing end date for the second line item to be a date greater than the billing start date, the above problem disappears and the total value of the contract does not include the tax component.
For eg.
Normal Error free Contract
Total Value at Header = 700.00 EUR
Material Outgoing Target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 150.00
Contract with billing plan error in second line
Total value at Header = 550.00 EUR
MAterial Outgoing target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 0.00
Any inputs would be most welcome.
Regards,
Venkatesh.Got the solution by making the condition type as manual.
Thanks.
Dhruba -
Org.Assignment Infotype start date and End date is getting wrong.
Hi, When i create a new employee in PA40, in Org. Assignment infotype start date and end date is getting wrong. for eg. When i create an employee on 01.04.2014. In org. assignment infotype its getting like this. 01.01.2014 to 31.03.9999 and 01.04.9999 to 31.12.9999 Two date entries are creating by default.
Hi
Check in the Table - T588Z : Dynamic Actions ,is there any custom routines causing the defaulting dates functionality.
Thanks,
Sreeram -
JSF - Why getting wrong path Handling URLs in Facelets Templates
Hi, I am trying to do a web application using JSF, Facelets in Netbeans 6.7. but I am having a problem:
Why I am getting wrong path ?
It is very simple, straight forward web application.
When run, it shows the template-client.xhtml perfectly . The navigation menu is shows ok, but they don't work. However, if I enter in the browser address http://localhost:8080/test3/portal/products.jsf it goes perfect to the right page and the navigation between About, Products and Home works perfect. But once I click on Home, the menu start to give me errors. Looks like the path is wrong again.
folders structure:
test3My code:
faces-config.xml:
<?xml version='1.0' encoding='UTF-8'?>
<!-- =========== FULL CONFIGURATION FILE ================================== -->
<faces-config version="1.2"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<application>
<view-handler>
com.sun.facelets.FaceletViewHandler
</view-handler>
</application>
</faces-config>web.xml:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<context-param>
<param-name>com.sun.faces.verifyObjects</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.validateXml</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.xhtml</param-value>
</context-param>
<context-param>
<param-name>facelets.DEVELOPMENT</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>facelets.SKIP_COMMENTS</param-name>
<param-value>true</param-value>
</context-param>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>forward.jsp</welcome-file>
</welcome-file-list>
</web-app>forward.jsp:
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<jsp:forward page="template-client.jsf"/>template-client.xhtml:
<?xml version='1.0' encoding='UTF-8' ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html">
<body>
This text above will not be displayed.
<ui:composition template="/template.xhtml">
This text will not be displayed.
<ui:define name="title">
Facelets
</ui:define>
This text will also not be displayed.
<ui:define name="body">
Hello from the Facelets client template!
</ui:define>
This text will not be displayed.
</ui:composition>
This text below will also not be displayed.
</body>
</html>template.xhtml:
<?xml version='1.0' encoding='UTF-8' ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:ice="http://www.icesoft.com/icefaces/component">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Facelets - Template Example</title>
<link href="#{facesContext.externalContext.requestContextPath}/css/default.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="menu">
<ui:insert name="linemenu">
<ul>
<li><a href="../forward.jsp">Home</a></li>
<li><a href="about.jsf">About Us</a></li>
<li><a href="products.jsf">Products</a></li>
</ul>
</ui:insert>
</div>
<div>
<h1>
<ui:insert name="title">Default Title</ui:insert>
</h1>
<p>
<ui:insert name="body">Default Body</ui:insert>
</p>
</div>
</body>
</html>about.xhtml:
<?xml version='1.0' encoding='UTF-8' ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets">
<body>
<ui:composition template="./../template.xhtml">
<ui:define name="title">
title ABOUT
</ui:define>
<ui:define name="body">
body ABOUT
</ui:define>
</ui:composition>
</body>
</html>products.xhtml:
<?xml version='1.0' encoding='UTF-8' ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets">
<body>
<ui:composition template="./../template.xhtml">
<ui:define name="title">
title PRODUCTS
</ui:define>
<ui:define name="body">
body PRODUCTS
</ui:define>
</ui:composition>
</body>
</html>My folders:
Test3
Web Pages
/WEB-INF
/css
-default.css
/layouts
/portal
-about.xhtml
-products.xhtml
-forward.jsp
-template.xhtml
-template-client.xhtmlPlease, I need help with this. It may is very easy to find out, I maybe skiping something
Thank for your help anyone!!! -
Getting wrong subtotals in the Report
Hi,
I have generated a report. But in that report i am getting wrong subtotals for some of the rows.
Please tell me what can be the reason and the corrective action for this.
Thanks and Regards,
VikrantIs that the Key fig are not properly adding up??? Then go the properties and set Calculate result as Summation
If this is not your problem then could you please show with an example how ur report looks like and what is the error that u are getting???? -
Java Calculator, Minus & multiplication button gets wrong answer?
import java.awt.event.*;
import java.applet.Applet;
import javax.swing.*;
import java.awt.*;
public class calc extends JApplet implements ActionListener
JTextField input = new JTextField("");
JButton numbers[] = new JButton[10];
JButton add = new JButton("+");
JButton equals = new JButton("=");
JButton minus = new JButton("-");
JButton multiply = new JButton("*");
JButton divide = new JButton("/");
JButton clear = new JButton("AC");
int num1 = 0;
int num2 = 0;
String oper = " ";
public void init()
setLayout(null);
setBackground(new Color(227,131,125));
Design();
public void Design()
int x = 1;
int y= 1;
int wi = 10;
int he = 50;
input.setSize(250,30);
input.setLocation(10,10);
add(input);
add.setSize(80,30);
add.setLocation(280,50);
add.addActionListener(this);
add(add);
minus.setSize(80,30);
minus.setLocation(280,90);
minus.addActionListener(this);
add(minus);
multiply.setSize(80,30);
multiply.setLocation(280,130);
multiply.addActionListener(this);
add(multiply);
divide.setSize(80,30);
divide.setLocation(280,175);
divide.addActionListener(this);
add(divide);
equals.setSize(80,30);
equals.setLocation(190,175);
equals.addActionListener(this);
add(equals);
clear.setSize(80,30);
clear.setLocation(100,175);
clear.addActionListener(this);
add(clear);
while(x<=10)
if (x==10)
numbers[x-1] = new JButton("0");
numbers[x-1].setSize(80,30);
numbers[x-1].setLocation(wi,he);
//numbers[x-1].setBackground();
else
numbers[x-1] = new JButton(Integer.toString(x));
numbers[x-1].setSize(80,30);
numbers[x-1].setLocation(wi,he);
wi = wi + 90;
if(x%3==0)
he = he + 40;
wi = 10;
numbers[x-1].addActionListener(this);
add(numbers[x-1]);
x++;
public void actionPerformed(ActionEvent act)
int x = 0;
while(x<10)
if(act.getSource().equals(numbers[x]))
if(x==9)
input.setText("0");
else
input.setText(Integer.toString(x+1));
x++;
if (act.getSource().equals(add))
num1 = Integer.parseInt(input.getText());
else if(act.getSource().equals(equals))
num2 = Integer.parseInt(input.getText());
input.setText(Integer.toString(num1 + num2));
if (act.getSource().equals(minus))
num1 = Integer.parseInt(input.getText());
oper = "minus";
else if(act.getSource().equals(equals))
num2 = Integer.parseInt(input.getText());
if(oper.equals("minus"))
input.setText(Integer.toString(num1 - num2));
if (act.getSource().equals(multiply))
num1 = Integer.parseInt(input.getText());
oper = "multiply";
else if(act.getSource().equals(equals))
num2 = Integer.parseInt(input.getText());
if(oper.equals("multiply"))
input.setText(Integer.toString(num1 * num2));
The addition button is working, but i cant seem to make minus and multiply button work, they get wrong answer when i use them.. what could bee the problem with my codeSorry, but I don't see a simple fix in this code here (Hopefully I'm wrong and someone else will see this, but I don't) Because of this, I recommend that you fully scrap this code and start over from square one. I don't think that you really "see" your logic here. To help you see what you are trying to do, you need to separate your logic from your GUI. Try to build a non-gui calculator that works via simple console menu. Once you get this working, then use this code to create a GUI calculator.
-
SAX-ContentHandler -characters methods gets wrong int end sometimes
Hi
I am having problems with SAX-ContentHandler -characters methods. It gets wrong int end values time to time ---means that it chops up my strings when it reads large XML files.
Is there any way to correct it? Any suggestions will be very helpful. Thank you.
My code is below.
public class MyContentHandlerDemo extends Thread implements ContentHandler{
private ArrayList hitList = new ArrayList(1000);
private ArrayList hitId = new ArrayList(1000);
private ArrayList hspNum = new ArrayList(1000);
private ArrayList hitLength = new ArrayList(1000);
private ArrayList queryFrom = new ArrayList(1000);
private ArrayList hspith = new ArrayList(1000);
private ArrayList idith = new ArrayList(1000);
private String localname;
private Locator locator;
private int know=1;
private int knowid=1;
private int knowlength=1;
private int knowhitlength=1;
private int knowhspnum=1;
private int knowhspnumadd=1;
private int knowhspnumlength=1;
private int knowquery=1;
private int knowqueryfrom=1;
private int processon =1;
private int processcount = 0;
private int hspithnum=0;
private int idithnum=0;
String allstr;
String addseq;
char [] allchar;
int icount=0;
int lengthsum=0;
public synchronized void setDocumentLocator(Locator locator) {
System.out.println(" * setDocumentLocator() called");
// We save this for later use if desired.
this.locator = locator;
public synchronized void startDocument() throws SAXException {
System.out.println("Parsing begins...");
public synchronized void endDocument() throws SAXException {
try {
FileOutputStream outputfileDemo;
PrintStream printoutDemo;
outputfileDemo= new FileOutputStream("apoe500.fasta");
printoutDemo=new PrintStream(outputfileDemo);
FileOutputStream reSaxfile;
PrintStream printoutReSax;
reSaxfile= new FileOutputStream("reSax.txt");
printoutReSax=new PrintStream(reSaxfile);
int m = hitList.size();
for (int k=0; k < m; k++) {
int comp = (((hitList.get(k)).toString()).length());
String strComp = Integer.toString(comp);
String hitleng = (hitLength.get(k)).toString();
if(strComp.compareTo(hitleng)!=0)
{System.out.println("Warning: Length is different at hit number (-1) " + hitId.get(k));}
for (int l=0; l < hspith.size(); l++){
printoutReSax.println((hspith.get(l)).toString());
outputfileDemo.close();
printoutDemo.close();
reSaxfile.close();
printoutReSax.close();
} catch (IOException e) {
System.out.println("IOException errors");
System.out.println("...Parsing ends.");
public synchronized void processingInstruction(String target, String data)
throws SAXException {
//System.out.println("PI: Target:" + target + " and Data:" + data);
public synchronized void startPrefixMapping(String prefix, String uri) {
//System.out.println("Mapping starts for prefix " + prefix +
// " mapped to URI " + uri);
public synchronized void endPrefixMapping(String prefix) {
//System.out.println("Mapping ends for prefix " + prefix);
public synchronized void startElement(String namespaceURI, String localName,
String rawName, Attributes atts)
throws SAXException {
localname =localName;
int which =100;
if (localname.equals("Hit_id")) {which = 0;}
if (localname.equals("Hsp_num")) {which = 1;}
if (localname.equals("Hsp_hseq")) {which = 2;}
if (localname.equals("Hsp_align-len")) {which =3;}
if (localname.equals("Hsp_query-from")) {which =4;}
switch (which){
case 0: knowid=0;
//icount=icount+1;
break;
case 1: knowhspnum=0;icount=icount+1;
break;
case 2: know=0; //icount=icount+1;
break;
case 3: knowlength=0; //icount=icount+1;
break;
case 4: knowquery=0; //icount=icount+1;
break;
default: knowid=1; know=1; knowlength=1; knowhspnum=1;knowhitlength=1;knowquery=1;
public synchronized void endElement(String namespaceURI, String localName,
String rawName)
throws SAXException {
//System.out.println("endElement: " + localName + "\n");
public synchronized void characters(char[] ch, int start, int end)
throws SAXException {
String s = new String(ch, start, end);
int process=100;
if (knowid==0) {process=0;}
if (knowhspnum==0){process=1;}
if (know==0) {process=2;}
if (knowlength==0) {process=3;}
if(knowquery==0){process=4;}
switch(process){
case 0:
idithnum = idithnum+1;
//int start1 = start;
//int end1 = end;
//char [] datahold1 = new char[end1];
//for (int i=0;i<end1;i++){
//datahold1=ch[start1+i];
//warn if the length is differernt
int n=s.length();
allchar = new char[n+1];
allchar[0] = '>';
for (int i=0; i<n; i++){
allchar[i+1]=s.charAt(i);
allstr = new String(allchar);
hitId.add(allstr);
knowid=1;
processon=1;
break;
case 1:
hspNum.add(s);
if ((s.compareTo(Integer.toString(1)))!=0){
String hspallstr = new String (allstr.concat(s));
hitId.add(hspallstr);
knowhspnum=1;
processon=1;
break;
case 2:
hitList.add(s);
know=1;
processon=1;
break;
case 3:
hitLength.add(s);
knowlength=1;
processon=1;
break;
case 4:
queryFrom.add(s);
knowquery=1;
processon=1;
break;
default: processon=0;
public synchronized void ignorableWhitespace(char[] ch, int start, int end)
throws SAXException {
String s = new String(ch, start, end);
public synchronized void skippedEntity(String name) throws SAXException {I put some more codes in characters(). Then I got OutOfMemory: Java Heap Error.
I probably have to write something in startElement() to limit input for characters() method.
Could anyone help me? I need to limit inputs for charactes() in startElement().
I added some codes in characters() method
public synchronized void characters(char[] ch, int start, int end)
throws SAXException {
String s;
StringBuffer stringbuf1;
String finalstring1;
int process=100;
if (knowid==0) {process=0;}
if (knowhspnum==0){process=1;}
if (know==0) {process=2;}
if (knowlength==0) {process=3;}
if(knowquery==0){process=4;}
switch(process){
case 0:
//s = new String(ch, start, end);
idithnum = idithnum+1;
//int start1 = start;
//int end1 = end;
//char [] datahold1 = new char[end1];
stringbuf1 = new StringBuffer();
while(ch!=null){
stringbuf1.append(ch);
finalstring1 = stringbuf1.toString();
//warn if the length is differernt
int n=finalstring1.length();
allchar = new char[n+1];
allchar[0] = '>';
for (int i=0; i<n; i++){
allchar[i+1]=finalstring1.charAt(i);
allstr = new String(allchar);
hitId.add(allstr);
knowid=1;
processon=1;
break;
case 1:
//s = new String(ch, start, end);
stringbuf1 = new StringBuffer();
while(ch!=null){
stringbuf1.append(ch);
finalstring1 = stringbuf1.toString();
hspNum.add(finalstring1);
if ((finalstring1.compareTo(Integer.toString(1)))!=0){
String hspallstr = new String (allstr.concat(finalstring1));
hitId.add(hspallstr);
//System.out.println(allstr);
knowhspnum=1;
processon=1;
break;
case 2:
//s = new String(ch, start, end);
//int lengthend=end;
stringbuf1 = new StringBuffer();
while(ch!=null){
stringbuf1.append(ch);
finalstring1 = stringbuf1.toString();
checklength:
while(know==0){
if(lengthend!=new Integer((hitLength.get(hitLength.size()-1)).toString())){
String s1=new String(ch, start, end);
s = (((hitList.get((hitList.size())-1)).toString()).concat(s1));
hitList.add(s);know=1;
break;
hitList.add(finalstring1);
processon=1;
break;
case 3:
//s = new String(ch, start, end);
stringbuf1 = new StringBuffer();
while(ch!=null){
stringbuf1.append(ch);
finalstring1 = stringbuf1.toString();
hitLength.add(finalstring1);
knowlength=1;
processon=1;
break;
case 4:
//s = new String(ch, start, end);
stringbuf1 = new StringBuffer();
while(ch!=null){
stringbuf1.append(ch);
finalstring1 = stringbuf1.toString();
queryFrom.add(finalstring1);
knowquery=1;
processon=1;
break;
default: processon=0; -
Gets wrong EventID in OnonFileEvent(..) of AutoVue Desktop Deployment.
Gets wrong EventID in OnonFileEvent(..) of AutoVue Desktop Deployment.
Following is part of code written in Delphi 5:
procedure TfrmTest.AutoVueViewFileEvent(Sender : TObject; const arg0 : IDispatch);
const
dispparamsNoArgs : TDispParams = ( rgvarg : NIL; rgdispidNamedArgs: NIL; cArgs : 0; cNamedArgs: 0 );
var
sMethodName : Widestring;
iDispId : longint;
v : Variant;
begin
sMethodName := 'getEventID';
arg0.GetIDsOfNames (GUID_NULL, @sMethodName, 1, LOCALE_SYSTEM_DEFAULT, @iDispId);
arg0.Invoke (iDispId, GUID_NULL, LOCALE_USER_DEFAULT, DISPATCH_METHOD, dispparamsNoArgs, @v, NIL, NIL);
if (iDispId = EVENTID_FILEEVNT_ONPAGELOADED) then
AutoVueXDesktop.printIt();
end;
Procedure AutoVueViewFileEvent(..) is assigned to OnonFileEvent of AutoVue.
But we never get Event ID as EVENTID_FILEEVNT_ONPAGELOADED (i.e. 18), we always get value like 32770
EXPECTED BEHAVIOR
Need to get Event ID as EVENTID_FILEEVNT_ONPAGELOADED once file loaded completely in viewer.I would recommend you review the code you are using and ensure you test for return codes
The id you always get is the one for the function you are trying to look for, so the behavior you see is expected
Please review IDispatch::Invoke prototype
HRESULT Invoke(
[in] DISPID dispIdMember,
[in] REFIID riid,
[in] LCID lcid,
[in] WORD wFlags,
[in, out] DISPPARAMS *pDispParams,
[out] VARIANT *pVarResult,
[out] EXCEPINFO *pExcepInfo,
[out] UINT *puArgErr
You should be testing the result, in your case v, not the function ID -
TextArea alpha gets wrongly applied to any htmltext images
If I set the alpha property of a textarea, the alpha gets
wrongly applied to any htmltext images also. How can I work around
this?Curtis,
I believe you can assign a style sheet to a TextArea control
using the TextArea class's "styleSheet" property (see
http://livedocs.adobe.com/labs/flex3/langref/mx/controls/TextArea.html#styleSheet).
Peter -
GET WRONG with ICON serialization/deserialization!!!
GET WRONG with ICON serialization/deserialization!!!
I have my own class X, which implements Serializable.
My own class X contains an Icon and a String!
I've created an obj (type X) !
set its Icon = UIManager.getIcon("Tree.closedIcon);
set its String = "yyyy";
i 've serialized it , and then deserialized , read it into my new var !
(my new var is also X obj!)
i've debugged my code : the Icon field and the String in my new var had
new values !
( the new values are not null ,and seem to be the original values)!
But when i put those values into a jLabel ,
the label show just the String !
i dont know how to over come it !
plz help ...it's me urgent !
plz help ! -
Reg: Error in Getting Wrong output using concurrent request
Hi all,
I created a rdf using oracle 10g report for below query
SELECT EMPNO,ENAME,DEPTNO,SAL,MGR FROM EMP
I Registered above created rdf in oracle apps with output format as xml
when i ran the report using concurrent request, i am getting below output.
*<G_EMP>*
* <EMPLOYEE>*
* <EMPNO>1</EMPNO>*
* <ENAME>ALEX</ENAME>*
* </EMPLOYEE>*
* <EMPLOYEE>*
* <EMPNO>2</EMPNO>*
* <ENAME>RAGHU</ENAME>*
* </EMPLOYEE>*
*<EMPLOYEE>*
* <EMPNO>3</EMPNO>*
* <ENAME>GURU</ENAME>*
* </EMPLOYEE>*
* </G_EMP>*
NOTE:_
I am not getting for rest of column in above query (ie. DEPTNO,SAL,MGR)_
How to resolve this. Its urgent .. PlzDuplicate thread (please post only once).
Reg: Plz Help me.. Not Getting output
Reg: Plz Help me.. Not Getting output -
Getting wrong values from modbus slave
Hi,
I'm trying to get data out of a lumel na5 digital meter. The device is connected via its RS485, through a RS232->RS485 converter to the RS232 port of the PC.
I've donwloaded the NI modbug library, and was able after some work to communicate with the device.
The problem is that the data I get out of it is wrong. I monitored the request and response data that the VI send, and it looks ok but the data is not correct.
Anybody has some similar experience?
Thanks in advance,
Eyal.Hi,
I do not have any experience with your device but, if you get data (even if it is wrong) from your device with a ModBus protocol you have your communication working !!
The wrong ModBus data is often caused by simply using the wrong register number(s). Start at 0 or 1, hexa and decimal mixup, invalid register numbers in the range, things like that. -
Multiple Mac Mail Users Getting Wrong Return Addresses
Hello,
Having an odd problem with Mac Mail. We just switched to Gmail and it's been working fine for about two weeks until this. I have a computer with 4 users using Mac Mail. It's been that way for about 4 years now. What happens is this...
When one of the users sends out an email, somewhere along the line the return address is getting changed to another user of that computer. So for example: Joe Brown ([email protected]) is what his email address SHOULD look like in the return address. But for some reason it is this: Joe Brown ([email protected]) Whenever someone replies to Joe's email, it gets sent to Steve's mailbox instead due to the wrong email address.
Things I've tried.
1. Rebuilt the mailboxes
2. Deleted all the accounts and started over
3. Repaired Permissions
4. Made sure there's enough space on the computer (In the past, odd problems have crept up because there wasn't enough disk space.
At first it seems to be fixed but eventually it all starts over again...
HEEEEELP!!
Thank you - RandyRandy,
Is it always the same user in the return address ?
And can we assume that whatever email address is involved it ends up with a return address at gmail.com or googlemail.com (or other GMail variant) ?
could be the smtp login used for all the mail has been set to an address on gmail. I don't use OSX Mail, but I use this feature in Entourage, I can send mail from any of my email addresses - some by different ISPs who would normally require me to dial in to their network to send mail, Gmail allows me to use their SMTP server to send mail from my other ISP mail account.
A consequence of this is that any replies come back to my gmail (googlemail.com in my case) account.
This doesn't happen by default, I needed to set some preferences on gmail, key a few passwords, etc. Can't check your gmail settings, but start by checking the SMTP server, and login, used for each user sending mail. -
Had a main system drive go out. Replaced and reloaded and now trying to get firefox sync to work and when I put in login info and my key it says wrong key but I do not have any other key and have used this key for years.
Can someone help me fix this without having to recreate a whole new account?For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa
Maybe you are looking for
-
I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a me
-
Why is it taking so long to download InDesign CC?
Why is it taking so long to download InDesign CC? If I am not able to download the new applications, due to an extremely slow connection, does Adobe have other means to help me obtain the software? Are there any 'other' solutions?
-
How to open file in adobe from safari
-
I know ther is a way to open link from an outside source (ichat, apple mail etc.) into a new tob in safari, but is there a way to open links from other websites in a new tab or are you just stuck with it opening in a new window unless you control cli
-
Hi all! I am using a touchscreen and a stylus, and I want to capture the events generated by the stylus. Obviously, MouseListener and all the other MouseXXX classes allow to capture these events. However, the stylus has two ends, one is intended to d