4110 current range selection

Hellow. There is any troubles with PXI-4110 current range programming. My algorythm:
1. Init dev
2. property node: active channel, output enable true, output function DC volt
3. property node: active channel, voltage level (variable), current limit avtorange on
4. Measure multiple, reading result (current, current range immediate value)
In attachment - my version of algorythm realisation.
Value o current limit range still 1. Required voltage 3.3V.
Would you send me example for current limit range changing?
Thank you!
Attachments:
Vcc Icc meas.vi ‏21 KB

Hi Gorge-
To set the current or voltage ranges, you must use the VIs found on the DC Voltage palette. They can be found on the block diagram by navigating to Measurement I/O»NI DCPower»Source»DC Voltage. There are four VIs in there that configure the voltage and current range and limit. For an example of how to use these, you can look in the LabVIEW Example Finder. In LabVIEW, click on Help»Find Examples. Once the example finder opens, navigate to Hardware Input and Output»Modular Instruments»NI DCPower»NI-DCPower Source DC Current.vi. While this VI sources current and probably doesn't do what you want, it demonstrates how to use the Current/Voltage Range/Limit VIs. These will allow you to set the voltage or current range of your device.
I hope this helps. Best of luck with your application!
Gary P.
Applications Engineer
National Instruments
Visit ni.com/gettingstarted for step-by-step help in setting up your system.

Similar Messages

How to make two Range Selection at the same time?

In a single clip, at the same time, in two locations, I would like to have Range Selection. Then I would like to switch between the two and play within the range one after the other immedeately. Is this possible? Thanks.

success1975 wrote:
In a single clip, at the same time, in two locations, I would like to have Range Selection.
You can mark multiple range selections in a clip by clicking and dragging with the Command key down – or marking in and out points with Shift+Command.
I don't know what you mean when you say "at the same time".
Then I would like to switch between the two and play within the range one after the other immedeately. Is this possible? Thanks.
Forward slash plays betweeen the in and out. The only way I know to play them one after the other "immediatelly" is to edit the two selections to the timeline.
Russ

HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.

HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.
how can we add range selection in screen painter.
regards.

Hi,
 create two input fields and a push button like select option in the screeen.
Try checking this logic
Program:
ranges ra_matnr for mara-matnr.
Layout field name declaration:
Give the low field name as ra_range-low
and high field name as ra_range-high.
extension for pushbutton.--exten(function code)
next -- function code for the enter key.
PBO
module status_3000.
PAI
module user_command_3000.
module user_command_3000.
if sy-ucomm = exten.
call screen 400. (screen which shows extension values can be kept).
elseif sy-ucomm = Next.
if ra_matnr-low is not initial.
 ra_matnr-SIGN = 'I'.
 ra_matnr-OPTION = 'EQ'.
 APPEND ra_matnr.
 clear ra_matnr.
endif.
if ra_matnr-high is not initial.
 ra_matnr-SIGN = 'I'.
 ra_matnr-OPTION = 'EQ'.
 APPEND ra_matnr.
 clear ra_matnr.
endif.
endif.
endmodule.
module status_3000.
read table ra_matnr index 1 into ra_matnr .
set pf-status '3000'.
set title '3000'.
endmodule
Br,
Laxmi.

KDMAT need to be included in the current VA01 selection screen or list when

Hello SAP SD Consultants,
Please help me with below requirement or what user exit should we use to implement below requirement. I have discussed with with ABAP and gave some User exits that has related description, however, ABAP confirmed that none of below UE suits the requirement.
1. AD010002 - Delimit selection and/or filter data that is determined
2. CLCLRS01 - Additional Fields on the Result Screen
3. CLCLRS02 - Fill the Additional Fields on the Result Screen
4. V60P0001 - Data provision for additional fields for display in lists
5. WVLB0001 - Display additional data in subscreen for simulation list
Thus, kindly help us on how we can proceed with this.
000----
Requirement:
The field u201CCustomer-material numberu201D or field name KDMAT need to be included in the current VA01 selection screen or list when creating sales orders with reference from a contract.
Currently, customer have its own description or material code to classify or define the product they want to order which are sometimes not exactly the same as the material number maintained in the system or the product / material code used by the Company for sales. These material descriptions were manually entered in the system thru the use of customer-material number field or KDMAT. When sales orders or contracts are created for certain or specific customers, the user or the person who creates that contract / order manually inputs the description in the customer-material number field.
The said entry should also be seen in the Selection List for Reference Document. The transaction to be modified is VA01 under program screen SAPMV45A specific to screen number 4413.
Test Data used:
Reference Transaction: VA41 (create contract), VA43 (display contract)
Order Type: ZCQ (example)
Contract No. 40000040
Transaction: VA01
Order type: ZOR (example)
Contract No. 40000040
a. Go to tcode VA01, input the order type ZOR, click the button CREATE with REFERENCE.
b. Input the reference contract document, since our reference doc is a contract, go to tab CONTRACT and input the contract no..
Expected output:
Upon inputing the contract no. in the contract tab, click u201CSelection Listu201D.
The customer-material number or KDMAT should be included as one of the field and should be displayed in the Selection List for Reference Document window.
Edited by: ria sumagaysay on Mar 26, 2010 11:30 AM

Hello,
Thank you for the responce.
The reason why they want to reflect KDMAT in the selection list is that, during order creation, not all materials or KDMAT will be ordered by that customer, only specific materials. However, during order processing, the customer only gives the details of the KDMAT. Thus, if there are around hundreds of items inside that contract, the sales personnel who creates the order needs to exclude those material not included in the customer order list manually via checking table VBAP and compare the material code from the selection list.
This is very tedious on their part and commonly caused human error, however, when the KDMAT field is available, although the process has manual intervention, it will serve them well and lessen the burden.

Set range selection on a clip using "X" not working!

So I just downloaded FCPX this afternoon and am trying to select a range on a clip in the Event Browser to then drag that selection down to the Timeline. On a 20 second clip, I press the "I" at 7 seconds in, then I press "O" at 14 seconds. That's the part of the clip I want. So then the FCPX Online User Guide tells me to do this:
In the Event Browser or the Timeline, move the skimmer (or the playhead) over a clip and press X.
Final Cut Pro sets the range selection start and end points at the clip start and end points.
Note: To use this X key method with connected clips or clips in a connected storyline, move the pointer directly over the clip and press X.
BUT, when I press X, it discards my "I" and "O" points and puts the yellow selection box around the entire clip again! It's very frustrating. Please help me, what am I doing wrong, or is this a bug? I'm up against a deadline and this is preventing me from moving forward because it won't "store" or remember, I don't know what to call it, my in and out points and the yellow bounded selection range on the clip!
Thank you!
Paul

Huh? Tom, thank you, but I'm not supposed to use the manual? I desperately need a User Guide. Is there one? And you did not explain what X does then, or what I am supposed to do? If the X does not do what that manual says, then how do I set the In and Out points on the clip?
Confused,
Paul

Multiple Range Selection for field Material in CS14

Hi friends ,
Is it possible to make multiple range selection for material field in tcode CS14 [used to compare primary and secondary BOM] i have made it ZCS14.
if i make matnr2 to matnr2-low
but my doubt is it feasible solution
please through some light on this
regards
soorya

Dear Soorya,
What's your requirement? is that to compare the Alternative BOM's for multiple materials at the same time?
If it's going to be for comparing one more alternative for the same material,then it's a good report.
As per to my knowledge if the report is going to be for a list of materials Alternative BOM's means I dont
think whether it will be a fast(time wise) report.
Check & revert back.
Regards
Mangalraj.S

Change current row selected Color in ADF rich client table

Hi All ..
i want to change the current row selected from the default ADF color to Another color.
i am not very good in javaScript .
any one can help me
Edited by: user9519817 on Aug 30, 2008 3:57 AM

User,
You don't need Javascript to do this. Have a read of section 18 of the Oracle Web user Interface Developer's Guide for Oracle Application Development Framework (found [url http://download.oracle.com/otn_hosted_doc/jdeveloper/11/doc/b31973.pdf]here for information about creating a custom skin. Unfortunately, the documentation for the selectors to use, which should be in a JDev help topic titled, ""Selectors for Skinning Fusion's ADF Faces Components" doesn't exist yet :( However, you can check [url http://www.oracle.com/technology/products/adf/adffaces/11/doc/skin-selectors.html#]here for that information.
Selectors that may be of interest:
.AFTableCellDataSelectedColor:alias
.AFTableCellDataSelectedBandedColor:alias
.AFTableCellDataSelectedInactiveColor:alias
.AFTableCellDataSelectedBandedInactiveColor:alias
Best,
John

Date Range Selection in Query Templates

Hi,
Can someone please tell me how to use Date Range Selection Tab details in SQL Query and TAG Query (Using Examples).
Thanks in advance
Muzammil P.T

>>>>>>>>>>
Re: Date Range Selection in Query Templates
Posted: Feb 15, 2007 6:43 AM in response to: Muzammil Ahamed Reply E-mail this post
Hi Muzammil,
In data range section you can have multiple options like setting start datetime and end datetime.. And you can set the shift (or) time period and also the format of the time periods.
Primarily we use the start date and end date querying to fetch data between two time labels. I can explain this one with example..
You have batch production table with columns Production Time, Batch Id, Production Qty. Then you want all the details between the 02/02/2007 to 05/02/2007.
Solution :
1.Map 02/02/2007 with Start date.
2.Map 05/02/2007 with end dare.
Now these two become the variables [SD] and [ED].
Now you have mentioned the date range, but you need to mention for which column these things to be applied. For that
3.In Query tab enter Production Time column name in Date column at the bottom.
Now you have written query like Select * from batch prodcution where production time > 02/02/2007 and production time < 05/02/2007.
4. Even those values you mapped (SD and ED) you can change from the front page through Java script.
Like wise you have so many other advantages also.
If you have any other specific doubt let me know.
Thanks,
Rajesh.
PS : Please ward points if answer is useful. <<<<<<<<
Message was edited by:
 David Dreyer

Color range selection + layer styles

Hello--
Help me if you can!
I have had it on good authority (my photoshop instructor) that color range selection hasn't been working correctly for some time.
I'm using CS2, version 9.0.2 on an IMac os X version 10.5.8.
I am often working with multiple layers that are not similar at all. When I have one layer active and do a color selection, it may also select the color range on inactive layers. Then, if I do a fill, for example, it may affect areas on other layers that were inadvertantly color selected. I know there are ways to ask photoshop to perform a function on all layers, but I don't see this as an option or setting with color range selection. I had started to assume it was sort of like crop, which affects all layers, but when I asked, my teacher says it should only be selecting/affecting the layer that is active.
I found I can deal with this by 'closing the eyes' (making non-visible) the other layers...but that is a hassle and sometimes hides exactly what I need to see.
Then noticed, just lately, that when I use a layer style, it is no longer showing up on my layer palette. Maybe I don't understand correctly, but I thought any layer style addition would show up on the palette under the name of that layer. If I happen to remember that a particular layer used a layer style, I can still click on the layer styles icon and alter it, but it isn't displaying on the layer palette any more--so I cannot toggle or discard the effect simply, and it is hard to know why a layer looks the way it does without that information.
Could be I'm corrupted and need to deinstall/reinstall? Is there something I'm missing about these functions , or something I accidentally changed? I would really appreciate any help or information.

Yes your instructor is wrong, it always selects visible pixels, and always has. You can however create a selection before you go into Color Range, and it will only work within that selection though.
If you want Color Range to work in precisely the same way as it always did in the old versions you need to make sure that you ..
• Highlight a non masked layer and
• Uncheck the somewhat bizarrely entitled "Localised Color Clusters" checkbox
The changes to Color Range happened a few versions ago, to my memory it was with CS4 . The main improvement was that they made it more powerful with the capability to produce better more refined selections. They also unfortunately made the daft mistake of making the command work DIFFERENTLY depending on whether you have a masked or a non masked layer selected. This is not very logical really because it just causes confusion, and doesn't really achieve anything constructive in my opinion. No one who knows what they are doing wants to modify an existing mask using Color Range.

How to do range selection for connected clips?

How to do range selection for connected clips? Whenever I press I or O, it only selects the primary storyline. I want select a portion of the connected clip and trim it.

If you're using the 10.1.x, and if you set the playhead, so that the circle is over the connected clilp (you don't even need a range selection OR have the clip selected) you can type Option - [ to trim from the beginning of the clip to the playhead; you can type Option - ] to trim from the playhead to the end; or if you do set a Range selection, you can type Option - \ (backslash) to trim both ends off the clip preserving the range selection.
If that circle isn't over the connected clip you require (perhaps you have a stack of clips) then you will need to click on the clip you need to have selected for the trim operation.

About Date Range Selection in Contributor Recognition Program- List

Hello SCN,
Happy that we have a classified date range selection like Year wise, Contest period wise and also with date range in the Top Contributors list. However earlier we had a luxury to see the point classified as "All Time Contribution". I personally feel to get back this option as well in the list.
Dear SDNers share your suggestion on this.
Thanks,
SaNv....

Hi,
If you want the user to select the date directly rather than entering, you need not to have a dropdown menu in WAD. Directly go to the query which you have selected for the object in WAD, there create a variable with calendar. Put it mandatory, so that the user selection of the date will be mandatory. The variable will be automatically be available when you execute the template inn the browser.
Assign points if this helps u.
Regards,
Koundinya.

How do I set the default tool. It's on range selection and I want it to be the select tool.

Final Cut Pro X. How do I set the default tool? It's on range selection and I want it to be the select tool.

Type the letter "a" or select it from the drop-down...

Display of 2 rows of data for 2 different date range selection

Hi Folks,
I have a requirement as follows,
User has an option of selecting 2 Date Ranges
From and To Date and again From and To Date
The result should display 2 different rows of data with From and To Date range selection.
Eg:
12/09/20008 to 03/09/2009           10 20 30 40
23/10/2009 to 18/12/2010           40 20 10 30
Difference                                   30 0 20 10
% Change                                   x y z   q
Thanks for your input.
Regards,
KJ

You will need to use union report, and you would have fours union's in this report.
Union - 1: Data from 1st Date Range
Union - 2: Data from 2nd Date Range
Union - 3: Variance Calculation
Union - 4: Percentage Variance Calculation.
If the date's are coming from the same field, use cast function to use the same column twice in your prompts. Apply filters on each union as needed.
Thanks.

When I detach my audio do I have to include that in range selection when exporting clip?

So I usually export the clip I want to share by Range selecting it and then exporting the range selected part. I detached the audio and cannot seem to grab the audio file underneath the regular clip to export with the rest. How can I get that detached audio in the range selected part or will it just go along too even if it is not in the yellow range selected part?

FCP exports everything in the range, vertically as well as horizontally.

'Range selection' stuck on

Hi there, the 'range selection' tool seems to be stuck on which means I cant choose 'select', 'position' or add in and out points. The dropdown menu for the tool shows the 'range selection' option highlighted with a dull orange. I have tried to change it with the menu bar and shortcut keys but nothing works. Any ideas?
Thanks
Dave

Don't know whether this will help but corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

4110 current range selection

Similar Messages

Maybe you are looking for