42" Phillips tv no sound

I haaaave connected my HP media c enter desktop to the tv using an HDMI cable. I had it hooked up to a samsung tv the same way without any issues. The video comes out just fine but not the sound even though I have the correct device selected as the primary on the device list.
Any assistance would be greatly appreciated.

sorry I didn't see an edit bar for the message...
My drivers are all up to date as well

Similar Messages

  • XFI front panel digital out probl

    Ive had an xfi card for a while now, the xtreme pro gamer, i've loved it, and i wanted to upgrade and get the front panel for 80$, so i did, hoping i could connect my 5. headset threw fiber optic rather than the analog, and my 000 watt surround sount threw digital coax. The only reason?I didnt buy the flex jack module was because?I need a port for a mic.
    Well i got it yesterday and everything seems to be working, exept for the fact that it doesnt recodnize my back speakers?on either one,?my headset and surround sound in my room.
    Just?the front speakers, center and sub are recodnize, so wen i go into my thx console in game or entertainment mode, and i?click the back speakers to make a sound, the sound comes from the front speakers ...wtf ,
    Secondly on my heaset base?the?dolby Pro Logic light is on..shouldn't the Dolby Digital Light be on.
    Sombody plz help, this is driving me nuts.
    just cause i know you will all ask, my in room surround sound is a 000watt phillips 5. surround sound home theater system
    and my headset is this .. http://www.tigerdirect.com/applicati...94&sku=T26-090
    my headset worked beutifally before , wen connected by analog, i was hoping it would be better with fiber optic..

    Bump?..

  • No sound when I connect my Macbook pro (2012) to TV via HDMI!

    Hi! I have a problem with the sound when I connect my Macbook pro (bought in 2012) to a Phillips HD TV. The strange thing is that it only happens with some videos (specially youtube videos) but the sound works perfectly with films and audio files I have in my computer, and also when I watch TV online (Eurosport player for instance and other similar applications). It's even stranger because it doesn't happen all the time; last week I tried many times to watch some youtube videos and after unplugging the HDMI cable it seemed to work. As I said, with Eurosport player and many films downloaded in my macbook I don't have this problem (sound is ok all the time), and this is why I'm really confused. I suppose it's not a connection problem, otherwise I wouldn't have sound in any video, right? I've tried two different HDMI's cables but nothing has changed. Please, someone help me, as I can't figure out what's happening. Thank you very much!

    Well Im not sure what the fix is for your problem, but can you please open up the sound preference next time you connect the philips tv, and make sure that sound output is set to hdmi out. Then try and play your video's etc and see if they are affected. 
    I can tell you I get a similar problem when, for example, I have a youtube window open and then connect the external display. The youtube video will not sound out through the cable, however if i refresh the window it works. Also the same when I use bluray player on mac, I have to close it and open it again for the sound to output through the external monitor.

  • No sound through HDMI output

    I have a new macbook pro retina display with an hdmi port built in. I have connected it to my hd tv and have not been able to recieve any sound. I have gone through the settings under sound and changed the output from built in speakers to hdmi. However, I have noticed that it recognizes my hd tv as a phillips when it is in fact a magnavox. Anyone know of anything that can be done to fix this?
    [URL=http://imageshack.us/photo/my-images/194/screenshotvj.png/][IMG=http://img194.imageshack.us/img194/7951/screenshotvj.png][/IMG][/URL]
    Uploaded with [URL=http://imageshack.us]ImageShack.us[/URL]

    By the way...
    CMiloni wrote:
    I have noticed that it recognizes my hd tv as a phillips when it is in fact a magnavox.
    That may mean nothing. "MAGNAVOX is a registered trademark of Philips Electronics North America Corporation." according to maganavox.com, for whatever that's worth.

  • Problem HDMI connection to new Panasonic TC-60ps34 plasma; tv says no signal but computer detects tv; worked fine on 4 yr old phillips plasma; 2011 macbook pro running os10.6.8.

    New 60" Panasonic plasma says no signal won't display picture/sound from 2011 macbook pro running os10.6.8 connected via HDMI with moshi MDP to HDMI Adapter. Same setup on former 4-yr-old Phillips Plasma worked fine (but the tv died!)

    dohdoh1985 wrote:
    - I tried every Snow Leopard Release from 10.5.8 to 10.6.4
    Assuming this means the TV was not detected in any of these versions, this would not be a Snow Leopard installation or setup issue. I think that is what sig is trying to tell you.
    If this is true, you might want to post in the MacBook forums to see if anyone has a similar issue. It would be a good idea to post the model number of your Toshiba if you do so, as this might be relevant. Otherwise, it sounds like the problem is in the TV, since the MacBook works with other displays.
    Tip: to avoid unexpected formatting oddities that might make your posts hard to read, you can use the "Preview" tab before you post to see how your post will be formatted.
    Message was edited by: R C-R

  • Problem with connecting my Ipod Classic 80 gb to a Phillips Portable DVD

    I just purchased a Phillips Portable DVD player that I can insert my ipod into.
    It plays music, but everytime I go to play a movie it keeps coming up withTV OUT ENABLED, PLEASE CONNECT VIDEO ACCESSORY. I have set all the proper settings
    TV OUT - ON
    TV SIGNAL - NTSC
    TV SCREEN - STANDARD
    When I click on the source button it plays the sound but no picture appears on the screen.
    Any idea what is happening.
    I took the Phillips DVD player back to the store and their technician plugged in his older ipod and it works.
    Any help on this would be greatly appreciated.

    If you have a new enough iPod, they are now requiring an apple adapter that has the apple computer chip in it to work. I did a general search on the web and came up with better info than here.

  • My sounds have quit on my apps

    my sound on my apps have stopped working. its not on mute

    it has not worked. it seems to be since i got my phillips docking station. now i cannot listen to music on my phone without headphones or docking station. and have no sound on any apps unless its plugged in to either of the above

  • Intermittent Sound Loss (SFX & Audio)

    Hi gang, I have an odd problem with intermittent sound loss (button SFX + audio) on my brand new ATV2 (HDMI to HDMI on a 2 year old Phillips 42"). The picture is great, but the audio only works about 50% of the time. (?!) I'm totally stumped. I did some troubleshooting. Restart, Reset, Restore. No dice. I swapped the cable and tried different HDMI ports — to no avail. I also spent an hour on the phone with an Apple tech. We did everything again and we turned off Dolby, etc. No dice. He suggested I bring the device into the Apple store, and they swapped it out for me. But I'm having the same problem with the new device — and AGAIN only 50% of the time. It seems totally arbitrary. Very frustrating. Any ideas would be appreciated.

    Did you try restarting your TV, the problem may be there.
    (I have a tv that starts to drop audio occasionally, although a restart of the tv will resolve the matter it does return perhaps weeks/months later)

  • SURROUND SOUND SET UP

    I have an older surround system (Phillips) that I am trying to use with a newer Samsung Smart TV.  Basically, I am looking to have sound come out of the surround speakers.  Right now I have a verizon DVR and an Xbox 360 connected to the TV.  
    Any thoughts?
    Thanks!

    I think if your observing a delay in the sound there may be another issue with one of your components.
    However I don't have a Cable Box, just a TIVO with a cable card.  I feed it direct to the TV via HDMI from the TIVO
    There are many theories on how fast current travels along a conductor.
    A common acceptance is that it moves along at about 1/100 of the speed of light or 1860 mph, even it it was half that your ear should not be good enough to detect the delay from your cable box ot your TV and back to your Reciever and out the speakers.
    Some people say it moves at the speed of light but that is harder to accept and can be seen to be a little bunk.  If you have ever seen a large area that  had lost electricity get it back you can obseve the delay in facilities lighting up,  it is still very fast but not nearly the speed of light.  

  • Blackmagic audio monitoring vs sound blaster audio monitoring?

    hi everyone
    i have a question. is it better to monitor audio via my speakers plugged into the creative sfx soundblaster sound card (which is what i am doing at present)or is it better to monitor audio via my speakers plugged into the intensity pro (blackmagic video card) ??
    or does it not really matter?
    i use a pair of phillips pc speakers at present. the speakers are of quite high quality and were not cheap when i bought hem. around 150 euros.
    what are the advantages/disadvatages of either method??
    cheers
    angus

    Today the biggest reason to create a non-Blackmagic Design project is that any Blackmagic Design project drops a lot of frames in any project which makes it frustrating to edit. This did not happen as often in CS3, but in CS4 it happens even on native Blackmagic Design footage with no filters on it, all the time. Yes, they do have a setting that allows the user to continue the playback despite any dropped frames, but it has no function in the 3.1 and 3.1.2 drivers, at least not on Vista 64-bit. It did work in CS3 and Vista 64-bit.
    The HDD's can sustain the data required, so its not a HDD issue. I dont know who to blame, Blackmagic Design drivers or the playback engine in CS4. Since older machines that played back HDV in CS3 without problems struggles with the very same footage in CS4 it seems that Adobe is the one to blame.
    Besides that i have no other reason to use a non-Blackmagic Design Timeline.
    AFAIK, you can edit 10-bit footage with the Intensity card. You cannot capture 10-bit footage though so its a catch22. Look at the Decklink series instead.
    /Roger

  • Clicking Sound when lifting/moving MBP w/ Retina display

    I recently purchased the new 15" MacBook Pro with Retina display (Late 2013) and I've noticed that sometimes when I touch the bottom of it in just the right spot (near the center) it makes a very slight clicking or ticking noise. It also makes this same noise sometimes when moving or lifting it. I've only had this MacBook for about 2 days now and haven't dropped or bumped into it at all. It's such a slight sound that it's probably nothing, but I just want to make sure. The only info I could find was related to older MacBooks with hard drives.

    I would check for a possible loose screw holding the bottom panel on. That being said, since I don't own one of those models (I have a late 2011 MBP 13"), I have no idea if the screws they use on the newer models are standard Phillips or Apple's proprietary Pentalobe (5-sided) screws. I would assume they are Phillips since the PC is likely upgradable (HDD, memory). If they are Phillips, go through and snug up the screws. It may help. Also, since the MacBook is new, you may want to take it in to the Genius Bar and have them check it out for you if you snug up the screws and it's still making the clicking sound.
    EDIT: chek out the links on the right side of the page that says "More like this", especially here:
    https://discussions.apple.com/message/10112877#10112877
    The sound you're hearing may be the normal operation of the SMS (Sudden Motion Sensor).

  • 5.1 Digital Surround Sound Output

    So what I need is to learn if AA3 has the ability for me to play only those First Violins (Rear Left), Second Violins, Piccolo, Oboe, Clarinet (Front Left), Brass Section & Cymbals (Front Right), Woodwind section (Center), Pipe Organ 16' bass, Timpani & Percussion etc (Sub-woofer), Double Bass (right rear), Violas, Keyboards, Organs, etc (Front Right).
    Does anyone know how I can do this?
    I need to experience what an Orchestra Conductor hears by digitizing through Multi-Track the ability to hear what he hears, but extended almost 360 degrees. My source material is mono-aural John Phillip Souza's marches recorded in the 1960s through Reader's Digest, who have given their permission for this type of work to be done.
    I want to have the resulting tracks using MixDown back to 2 channel stereo in .WAV format but in 5.1 digital output in MP3 or MP4 format for all our cellphones that have MP3 players. If I can come up with my own arrangements of my own compositions, or my own arrangements of others' compositions that I have helped to "orchestrate", then this is the sound I need. Anyone with a digital home theatre system will appreciate the forethought gone into creating something of this magnitude.
     

    Hi Ian,
    this system has the design feature of discarding standard usenet quotes and
    anything thereafter, but not writing usenet style would be confusing to any
    other user of the miserable, bodged, offline feature of this here
    re-invented messaging system. Consequently I'll try to beat the design issue
    with a different quoting prefix ... just in case I'll re-iterate the main
    point made up here: you can not uncook a stew.

  • One SOUND reason not to upgrade Q10 to Passport or Classic

    ref:  headphone jack hugely erratic
    No replies to prior posting.  In the meantime, the hyper-sensitivity of the headphone jack is driving me crazy.  I'd been using the headphones for Music play the last two months.  One month ago, my Q10 went off its 1 year warranty -- coincident with the headphone jack starting to act weird and erratic.
    The slightest movement of the jack (using BB earbuds or Phillips or other) will cause the music play to stop, and default to the Main Speakers.  Nearly impossible to restart the earphone sound, without stopping play and slowly re-inserting the jack into the port.  Even then, its trial and error and often does not work.  Once working, its back to slightest movement of the jack stops play.  I tried moving the wire (without moving the jack), but this does not stop play.  
    From my observations, the Q10 is constantlyl checking the connections, as the jack is inserted into the port, and using some complicated logic to turn on or off the headphones.  So erratic, and driving me nuts the last month.  And that's aside from the **bleep** Voice Control turning on when inserting the jack, no consistency for when this occurs, just starts talking out loud.
    Unless Blackberry can implement a simple and 100% reliable fix, I will not consider upgrading to the Passport or the Classic.  I suspect they use the identical headphone jack/port logic to enable/disable the headphones with 10.3.
    Please consider enhancing 10.3.1 or 10.3.2 etc with a new Sound Setting to:
    (1)  Fully DISABLE VOICE CONTROL
    (2)  Fully ENABLE ON the headphone jack port for sound (i.e. disable Main Speakers).  When set to ON, stop checking for integrity of the headphone jack connection, and insertion and removal logic.  If there is a momentary loss of connection, the sound should stop momentarily -- but DO NOT STOP PLAY, and requiring re-checking for headphone connection or insertion.  Just route the sound signal through the headphone jack, and assume headphones are plugged in with good connection.
    Keep it simple ... and reliable.  Please respond to my enhancement request.   This single problem is enough to not buy another Blackberry.  All my friends with iPhones and Androids are not fiddling with their earphones to keep them working.  Its old technology, make it reliable.  The problem affects the Music player, Video player, StereoTube, and YouTube.

    I just thought of an alternate solution to having a manual Headphone Jack ON switch.
    Instead, since its momentary faults (i.e. disconnects) last only a split second that cause the Music or Video player to stop PLAY and go into PAUSE mode, the electronic/software logic should check TWICE for a disconnect before going to PAUSE.
    That is, if a disconnect is sensed, check again in 0.25 second.  If the connection is still disconnected, then go to PAUSE.  If the connection is good at 0.25 second, then leave it alone and keep in PLAY mode!   Pretty simple.
    Perhaps, someone in the Support Forum can forward this to the BB developers.  They could test to determine the ideal time between disconnect checks, i.e. 0.15, 0.25, 0.4 sec etc.
    This could eliminate nearly all problems related to slight movement of the headphone jack caused by movement of the cable or jack for any reason.  I know this would work, as after switching from PLAY to PAUSE, I can hit the middle button on side and immediately go back to PLAY for 90% of the time.  On some occasions, I must reinsert the jack slowly to engage back to earphone jack sound.

  • Canon S120 making funny sounds when moving it around (in automatic mode)

    Hi everyone,
    I have a little question for those owning the Canon S120.
    I just bought it and I noticed that my camera is making funny sounds when I move it around. Those sounds seem to occur more often when I'm in the automatic mode.  If I don't move the camera, it doesn't make any sound, but as soon as I move it, it does a little "toc-toc" sound (hard to describe, it's like the camera is adjusting something automatically when it moves).  It seems to come from inside the camera and not from outside.  I have owned my Canon cameras before and this is the first time I notice that.
    Has anyone else noticed that?
    If so, is it "normal" or have I received a defective unit?
    Thanks for your help!

    Open the MBP.  Place it on a towel so you can slide it around easily and not scratch it.  Take a #00 Phillips driver and take the bottom cover off.  3 of the screws will be longer than the rest.  Inspect the interior for anything that may be loose.
    The other option is to take it to an Apple store genius bar and have them do it.
    Ciao.

  • TS1702 Sound lag in GarageBand app on iPad 4 + bluetooth connected to heardphone.

    I use GarageBand on iPad (4th generation). I record several tracks using built-in speaker. But as soon as I connect bluetooth heardphones to iPad the active GB instrument starts to sound with ~1 second delay.
    Interestingly the latency occurs for signal from ACTIVE INSTRUMENT ONLY (no delay for recorded GB tracks)
    That's why I assume that the lag happens on GB end but not on iOS or on bluetooth receiver (Phillips SHB9100) end.
    Everything goes back to normal as soon as I listen output sound via jack or built-in speaker. So currently I have to connect headphones via jack to monitor sound while I record to GB.
    Can anybody advise please:
    How to eliminate the lag for sound from active GB instrument in case I use Bluethooth sound output?
    Probably the same issue is discussed here: http://www.ifans.com/forums/threads/bluetooth-delay.211444/ (no solution given)

    Hi Meg thanks for the advice, I'm concerned about resetting both devices with no access to my iTunes, I've previously had issues where it would require iTunes to reset properly. Second issue is installing the same sharing app on the iPhone with no access to AppStore while I have no data on the phone. Guess I'll have to wait till I get home to access those photos on any other device... Ohwell.
    I think theres an assumption made by Apple that users of iPad and iPhone would always have access to the Internet, at the very least on the iPhone. Evidently thats not the case, they just didn't think it through when designing it. Hope they take notes on this forum and release hotspot functionality on iPad, that would really solve slow BT transfer speed problem also. BT has always been slow with file transfer, not really aware of it's best use.
    Thanks anyways Meg, appreciate the answer.

Maybe you are looking for