(-42110) is the error I get when trying to play films on iTunes - any help on this ?, (-42110) is the error I get when trying to play films on iTunes - any help on this ?

Hello AndyDryva
If you have the latest version of iTunes and the error code is still happening, then the next thing is to remove the SC Info folder on your computer. Check out the article below on how to do that.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Regards,
-Norm G.

Similar Messages

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work)

I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match

YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
TMI?
GB

When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/782039]</blockquote><br>
When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.].

Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. What can be done?

Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. Does anyone have any ideas what can be done?

follow the steps in this article first
=http://support.apple.com/kb/HT1451
after that restore your ipod and resync it
hope this helps:)

Hi all, I'm trying this morning to make the backup of my iPhone from 32 gigabytes. When I start the synchronization and backup I get written'' iTunes could not back up iPhone because an error occurred. I tried it on another iphone (4) and everything works

Hi all, I'm trying this morning to make the backup of my iPhone from 32 gigabytes. When I start the synchronization and backup I get written'' iTunes could not back up iPhone because an error occurred. I tried it on another iphone (4) and everything works fine. I can not reset the device because I have too much important data on it. Please help me.
Salve a tutti, sto cercando da stamattina di effettuare il Backup del mio IPhone da 32 gigabyte. Quando avvio la sincronizzazione e il Backup mi esce scritto '' iTunes non ha potuto eseguire il backup di Iphone perche si è verificato un errore. Ho provato su un altro iphone (4) e tutto funziona correttamente. Non posso ripristinare il dispositivo perchè ho troppi dati importanti sopra. Vi prego aiutatemi.

Ok I tried to delete the backup by using your location via preferences, but I did not find any file, maybe because I've already deleted following the path to the disk. I repeat that I have 2 devices and the problem only occurs on one

I get an error that says that LR5 encounterd a preview cach error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

I get an error that says that LR5 encountered a preview cache error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

Go to the folder with you Lightroom Catalog (usually in Pictures) and delete the folder ending in .lrpreviews
This contains the previews for the files Lightroom has linked to. They will need to be rebuilt which can be done while working or selecting an amount you want to rebuild and accessing the rebuild command in the Library Dropdown menu...

HT5622 When I tried to use my saved credit card, I made an error & it didn't work. Now, although the error is corrected, I keep getting a message that the card is declined. Can I fix this, or will the error time out?

When I tried to use my saved credit card, I made an error & it didn't work. Now, although the error is corrected, I keep getting a message that the card is declined. Can I fix this, or will the error time out?

Hello KGDJ,
Thanks for using Apple Support Communities.
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message
For more information on this, take a look at:
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/ts1646
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
Best of luck,
Mario

I am getting this error message when trying to get to a college webpage Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.

I am trying to get to a college webpage for information and get this error message from firefox Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.
== This happened ==
Every time Firefox opened
== whe trying to access webpage

Is this coming from a link, or from something you are trying to type in the address bar?
Try replacing the "html" at the start with "http",
so if you have html://somesite.edu,
change it to http://somesite.edu.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

When I try to open up a PDF document, i get the following error message: "There was an error opening this document. The network path was not found" AArrgh please help as I need to open up my documents. Thanks.

When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.

The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

While replaying ajax truclient scipt in loadrunner i am getting "this connection is untrust" error in the 40th step. I tried by deleting cert8 file but no use

while replaying ajax truclient script in loadrunner 11.0, getting error "this connection is untrust" page in 40th step. Add this exeception permanently check box is disable when i got the exeception certificate file. i tried with by deleting cert8.db file in loadrunner ajax truclient profile but still same result.
can any one guide me to resolve this issue...

Is that content loaded in an iframe?
You can check that via the right-click context menu to see if there is a "This Frame" item.<br />
If that is the case then try top open the frame in a new tab or otherwise check the Technical Details of the error message.

I just did an itunes update on my windows vista 64 and have been getting a runtime error eversense. Unstalled everything apple per microsoft forum discussions and solved the problem. When is apple going to update this problem for itunes?

I just recently did an itunes update on my Windows Vista 64 and have been getting a runtime C++ R0634 error ever since. Per microsoft forum discussions, I have removed everything apple on my computer to get this runtime error to stop. When I tried to remove and reinstall itunes, I get an error message during installation and to try again. Has just become a cycle. Apple, are you working on this?

I have exactly the same problem. Got update notice from Apple for iTunes and getting the C++ runtime error R0634 ever since. I have no clue how to fix it....meantime, I can't even pull up Outlook to check email. HELP!!
ksware

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far, just before cloning may start and receive an "error 254" and can go no further. Any idea what this error is?

I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
Vince

Connect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao.

(-42110) is the error I get when trying to play films on iTunes - any help on this ?, (-42110) is the error I get when trying to play films on iTunes - any help on this ?

Similar Messages

Maybe you are looking for