4260 Sensors connected to Active/ Active firewalls
I have the following scenario:
We have two edge firewalls with Active/ Active setup connected directly to two core switches. New two IPS sensor s4260 are required to be connected inline between the firewalls and core switches. What is the best practice design for such a scenario? Does the below diagram work fine in this case or another design is applicable?
re you using Inline Interface Pair or VLAN Pair?
we will use Vlan Pair
What is the expected throughput of the Network?
100 mb/s
Are these WAN firewalls or Internet?
wan firewall (FWSM)
Are there any server farms?
conected 6500
Similar Messages
-
2 * 4260 Sensors connected to Active/standby FWSM in 6500
4260 Sensors connected to Active/ Active firewalls
I have the following scenario:
We have two edge firewalls with Active/ standbye setup connected directly to two core switches5600. New two IPS sensor s4260 are required to be connected inline between the FWSM and core switches. What is the best practice design for such a scenario? Does the below diagram work fine in this case or another design is applicable?
we use vlan paringre you using Inline Interface Pair or VLAN Pair?
we will use Vlan Pair
What is the expected throughput of the Network?
100 mb/s
Are these WAN firewalls or Internet?
wan firewall (FWSM)
Are there any server farms?
conected 6500 -
I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?
Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom? -
I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.
Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
Event ID 91 Could not connect to the Active Directory. Active Directory Certificate Services
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event ID: 91
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DC1.chickbuns.com
Description:
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">91</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-07T19:34:00.000000000Z" />
<EventRecordID>819</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>DC1.chickbuns.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_DS_RETRY">
</EventData>
</Event>
:\Users\Administrator>dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC1
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
Warning: DC1 is not advertising as a time server.
......................... DC1 failed test Advertising
Starting test: FrsEvent
......................... DC1 passed test FrsEvent
Starting test: DFSREvent
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
......................... DC1 passed test SysVolCheck
Starting test: KccEvent
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
......................... DC1 passed test ObjectsReplicated
Starting test: Replications
......................... DC1 passed test Replications
Starting test: RidManager
......................... DC1 passed test RidManager
Starting test: Services
......................... DC1 passed test Services
Starting test: SystemLog
......................... DC1 passed test SystemLog
Starting test: VerifyReferences
......................... DC1 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : chickbuns
Starting test: CheckSDRefDom
......................... chickbuns passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... chickbuns passed test CrossRefValidation
Running enterprise tests on : chickbuns.com
Starting test: LocatorCheck
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
......................... chickbuns.com failed test LocatorCheck
Starting test: Intersite
......................... chickbuns.com passed test Intersite.My test lab one sinle domain controller server 2008 R2 Sp1 and member exchange server is using,the event error 91 is generated as per the technet article http://technet.microsoft.com/en-us/library/cc774525(v=ws.10).aspx the domain
computer and domain users in public key services container is not listed ..
C:\Users\Administrator>netdom /query fsmo
Schema master DC1.chickbuns.com
Domain naming master DC1.chickbuns.com
PDC DC1.chickbuns.com
RID pool manager DC1.chickbuns.com
Infrastructure master DC1.chickbuns.com
The command completed successfully.
Command Line: "dcdiag.exe
/V /D /C /E"
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine DC1, is a Directory Server.
Home Server = DC1
* Connecting to directory service on server DC1.
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
===============================================Printing out pDsInfo
GLOBAL:
ulNumServers=1
pszRootDomain=chickbuns.com
pszNC=
pszRootDomainFQDN=DC=chickbuns,DC=com
pszConfigNc=CN=Configuration,DC=chickbuns,DC=com
pszPartitionsDn=CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
fAdam=0
iSiteOptions=0
dwTombstoneLifeTimeDays=180
dwForestBehaviorVersion=3
HomeServer=0, DC1
SERVER: pServer[0].pszName=DC1
pServer[0].pszGuidDNSName (binding str)=771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
pServer[0].pszDNSName=DC1.chickbuns.com
pServer[0].pszLdapPort=(null)
pServer[0].pszSslPort=(null)
pServer[0].pszDn=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pServer[0].pszComputerAccountDn=CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
pServer[0].uuidObjectGuid=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].uuidInvocationId=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].iSite=0 (Default-First-Site-Name)
pServer[0].iOptions=1
pServer[0].ftLocalAcquireTime=ea9513a0 01cf0dd4
pServer[0].ftRemoteConnectTime=ea2bca80 01cf0dd4
pServer[0].ppszMaster/FullReplicaNCs:
ppszMaster/FullReplicaNCs[0]=DC=ForestDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[1]=DC=DomainDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[2]=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[3]=CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[4]=DC=chickbuns,DC=com
SITES: pSites[0].pszName=Default-First-Site-Name
pSites[0].pszSiteSettings=CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].pszISTG=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].iSiteOption=0
pSites[0].cServers=1
NC: pNCs[0].pszName=ForestDnsZones
pNCs[0].pszDn=DC=ForestDnsZones,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].dwFlags=0x00000201
pNCs[0].aCrInfo[0].pszDn=CN=5fc582f9-b435-49a1-aa54-41769fc24206,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].pszDnsRoot=ForestDnsZones.chickbuns.com
pNCs[0].aCrInfo[0].iSourceServer=0
pNCs[0].aCrInfo[0].pszSourceServer=(null)
pNCs[0].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[0].aCrInfo[0].bEnabled=TRUE
pNCs[0].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[0].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[0].aCrInfo[0].pszNetBiosName=(null)
pNCs[0].aCrInfo[0].cReplicas=-1
pNCs[0].aCrInfo[0].aszReplicas=
NC: pNCs[1].pszName=DomainDnsZones
pNCs[1].pszDn=DC=DomainDnsZones,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].dwFlags=0x00000201
pNCs[1].aCrInfo[0].pszDn=CN=9e1c2cb8-b90b-4e9f-90dd-9903f935e4af,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].pszDnsRoot=DomainDnsZones.chickbuns.com
pNCs[1].aCrInfo[0].iSourceServer=0
pNCs[1].aCrInfo[0].pszSourceServer=(null)
pNCs[1].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[1].aCrInfo[0].bEnabled=TRUE
pNCs[1].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[1].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[1].aCrInfo[0].pszNetBiosName=(null)
pNCs[1].aCrInfo[0].cReplicas=-1
pNCs[1].aCrInfo[0].aszReplicas=
NC: pNCs[2].pszName=Schema
pNCs[2].pszDn=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].dwFlags=0x00000201
pNCs[2].aCrInfo[0].pszDn=CN=Enterprise Schema,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[2].aCrInfo[0].iSourceServer=0
pNCs[2].aCrInfo[0].pszSourceServer=(null)
pNCs[2].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[2].aCrInfo[0].bEnabled=TRUE
pNCs[2].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[2].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[2].aCrInfo[0].pszNetBiosName=(null)
pNCs[2].aCrInfo[0].cReplicas=-1
pNCs[2].aCrInfo[0].aszReplicas=
NC: pNCs[3].pszName=Configuration
pNCs[3].pszDn=CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].dwFlags=0x00000201
pNCs[3].aCrInfo[0].pszDn=CN=Enterprise Configuration,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[3].aCrInfo[0].iSourceServer=0
pNCs[3].aCrInfo[0].pszSourceServer=(null)
pNCs[3].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[3].aCrInfo[0].bEnabled=TRUE
pNCs[3].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[3].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[3].aCrInfo[0].pszNetBiosName=(null)
pNCs[3].aCrInfo[0].cReplicas=-1
pNCs[3].aCrInfo[0].aszReplicas=
NC: pNCs[4].pszName=chickbuns
pNCs[4].pszDn=DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].dwFlags=0x00000201
pNCs[4].aCrInfo[0].pszDn=CN=CHICKBUNS,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[4].aCrInfo[0].iSourceServer=0
pNCs[4].aCrInfo[0].pszSourceServer=(null)
pNCs[4].aCrInfo[0].ulSystemFlags=0x00000003
pNCs[4].aCrInfo[0].bEnabled=TRUE
pNCs[4].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[4].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[4].aCrInfo[0].pszNetBiosName=(null)
pNCs[4].aCrInfo[0].cReplicas=-1
pNCs[4].aCrInfo[0].aszReplicas=
5 NC TARGETS: ForestDnsZones, DomainDnsZones, Schema, Configuration, chickbuns,
1 TARGETS: DC1,
=============================================Done Printing pDsInfo
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Failure Analysis: DC1 ... OK.
* Active Directory RPC Services Check
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
The DC DC1 is advertising itself as a DC and having a DS.
The DC DC1 is advertising as an LDAP server
The DC DC1 is advertising as having a writeable directory
The DC DC1 is advertising as a Key Distribution Center
The DC DC1 is advertising as a time server
The DS DC1 is advertising as a GC.
......................... DC1 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC DC1 for domain chickbuns.com in site Default-First-Site-Name
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
[DC1] No security related replication errors were found on this DC!
To target the connection to a specific source DC use /ReplSource:<DC>.
......................... DC1 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the server is running DFSR.
......................... DC1 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC DC1.
* Security Permissions Check for
DC=ForestDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=chickbuns,DC=com
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=chickbuns,DC=com
(Configuration,Version 3)
* Security Permissions Check for
DC=chickbuns,DC=com
(Domain,Version 3)
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\DC1\netlogon
Verified share \\DC1\sysvol
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
DC1 is in domain DC=chickbuns,DC=com
Checking for CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com in domain DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com in domain CN=Configuration,DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
......................... DC1 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was
not entered
......................... DC1 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
DC=ForestDnsZones,DC=chickbuns,DC=com has 1 cursors.
DC=DomainDnsZones,DC=chickbuns,DC=com has 1 cursors.
CN=Schema,CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
DC=chickbuns,DC=com has 1 cursors.
* Replication Latency Check
......................... DC1 passed test Replications
Starting test: RidManager
ridManagerReference = CN=RID Manager$,CN=System,DC=chickbuns,DC=com
* Available RID Pool for the Domain is 1600 to 1073741823
fSMORoleOwner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
* DC1.chickbuns.com is the RID Master
* DsBind with RID Master was successful
rIDSetReferences = CN=RID Set,CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1103
......................... DC1 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... DC1 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... DC1 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... DC1 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com and backlink on
CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on
CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (msDFSR-ComputerReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com are
correct.
......................... DC1 passed test VerifyReferences
Starting test: VerifyReplicas
......................... DC1 passed test VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... DC1 passed test DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : chickbuns
Starting test: CheckSDRefDom
......................... chickbuns passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... chickbuns passed test CrossRefValidation
Running enterprise tests on : chickbuns.com
Starting test: DNS
Test results for domain controllers:
DC: DC1.chickbuns.com
Domain: chickbuns.com
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Enterprise (Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000007] Intel(R) PRO/1000 MT Network Connection:
MAC address is 00:0C:29:DE:7F:EB
IP Address is static
IP address: 192.168.1.30
DNS servers:
192.168.1.30 (dc1.chickbuns.com.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
192.168.1.1 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: chickbuns.com.
Delegated domain name: _msdcs.chickbuns.com.
DNS server: dc1.chickbuns.com. IP:192.168.1.30 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone chickbuns.com
Test record dcdiag-test-record deleted successfully in zone chickbuns.com
TEST: Records registration (RReg)
Network Adapter
[00000007] Intel(R) PRO/1000 MT Network Connection:
Matching CNAME record found at DNS server 192.168.1.30:
771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
DC1.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.48c41195-2630-4461-aaef-ec2a63cd8bf3.domains._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._udp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kpasswd._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.gc._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_gc._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.pdc._msdcs.chickbuns.com
Total query time:0 min. 3 sec.. Total RPC connection
time:0 min. 0 sec.
Total WMI connection time:0 min. 6 sec. Total Netuse connection
time:0 min. 0 sec.
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 192.168.1.1 (<name unavailable>)
All tests passed on this DNS server
Total query time:0 min. 0 sec., Total WMI connection
time:0 min. 5 sec.
DNS server: 192.168.1.30 (dc1.chickbuns.com.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.chickbuns.com. is operational on IP 192.168.1.30
Total query time:0 min. 3 sec., Total WMI connection
time:0 min. 0 sec.
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: chickbuns.com
DC1 PASS PASS PASS PASS PASS PASS n/a
Total Time taken to test all the DCs:0 min. 9 sec.
......................... chickbuns.com passed test DNS
Starting test: LocatorCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test LocatorCheck
Starting test: FsmoCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test FsmoCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... chickbuns.com passed test Intersite -
Event properties – Event 91, Level Error, Event ID 91, Date and time 5/10/2012 11:29:48AM, Service CertificationAuthority
General:
Could not connect to the Active Directory.
Active Directory Certificate Services will retry when processing requires Active Directory access.
We have a Windows 2008 Server Enterprise with AD . I would like to enable the service "Certificate Services" that
allow me to enable radius to authenticate users wireless with the active directory.Hi,
Can you please check this forum or someone from Microsoft, as we have post here dating back from October that are not being answered.
Everything for us is exactly the same as szucsati and Racom
NMNM,
Please give us an answer on this as the link provided is absolutely useless.
Thank you. -
I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".
I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
Yes, I am connected... how else could I write this?
Adobe chat doesn't help. Adobe Tech doesn't help!
I purchased a book and I want to read it!!! HELP!
Also, since this is the first book I have downloaded there is not "de-authorize" option.
Thanks.yes... uninstall 4.0... go to download site... scroll down and download 3.0install 3.0 and authorize computer than you can upgrade to 4.0
Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.
created by readingjenn in Adobe Digital Editions - View the full discussionI am also having the same issue. Following to see if you get an answer. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063023#7063023 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063023#7063023 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I keep getting an error for activation. It won't connect to the activation server. Please help!!
I have received this error close to a thousand times now. I need to authorize my computer and use the Digital reader. I keep getting an error stating that it cannot connect to the activation server.
I don't speak (write) english.
I have the same problem (I'm having this too!).
My problem is: Error! Check Activation.
"Erro do Servidor de Ativação. Código: E_AUTH_NOT_READY O digital editions encontrou um erro no servidor de ativação." -
Connection Error.
Digital Editions could not connect to the activation server. Please make sure you are connected to the internet.
I am using a PC windows 8You should check if Firewall Adobe Digital Edition blockt.
-
HT201210 is anyone having trouble connecting to the activation server?
is anyone having trouble connecting to the activation server?
All of Apple's servers...including the activation servers are pretty much flooded with users like you doing the same thing. Be patient and keep at it...or wait till the traffic to them has decreased and then try again. Coming back to it tomorrow (if that's a viable option for you) will likely increase your chances of not having issues.
-
Connection Error: Digital editions could no connect to the activation server.
My question has to do with adobe digital editions. When I try to authorize my computer, it says "Connection Error: Digital editions could no connect to the activation server. Please make sure you are connected to the Internet." I´m sure that there is a connection to the internet .I have tried reinstalling ADE 2.01, Thanks for your help!
This is the Reader forum. The Digital Editions one is here:
http://forums.adobe.com/community/adobe_digital_editions -
Digital Editions could not connect to the activation server.
I am unable to download books from my local library using Adobe Digital Editions. My library told me to unauthorize which was also supported by the on-line help discussions on the Adobe website. I did that and now when trying to re-authorize continue to receive this message "Digital Editions could not connect to the activation server. Please make sure you are connected to the internet'". I am connected so that is not the issue. I had great difficulty finding a phone number to call for help and when finally successful, I was in the process of being transferred and the call was dropped.
Please HELP!Two possibilities.
One is that the connection is being blocked by your firewall. Try turning the firewall off (temporarily) and trying to register again.
Another is a bug in ADE2. Quite common: but I don't think it is the issue for you. May be worth trying 1.7.2 just in case ...
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172 -
SQL1119N A connection to or activation of database "DEV"
Hello All,
am Gautam Poddar from PwC, Kolkata. I have talked with you just now.
We have activated the logretain and userexit on after taking the full ofline backup of the system. We were unable to take the online backup, so log directory was full. So we have moved the log file from log directory to another directory. After that we have increased the size of the log directory and copy all the log files to log directory but database connection is failed. I am getting this error while try to connect with this command > connect to dev
SQL1042C An unexpected system error occurred. SQLSTATE=58004
Yesterday I was unable to resolve the problem. So I have restored all the file system from OS level Backup. Now I am not able to connect the Database and it is giving this error message
ecldevqa:db2dev 5> db2 connect to DEV
SQL1119N A connection to or activation of database "DEV" cannot be made
because a previous restore is incomplete. SQLSTATE=57019
Restored these file system
/dev/sapvg/devsaptemp1
1572864 16768 1544008 1% /db2/DEV/saptemp1
/dev/sapvg/devsapdata4
41943040 23979664 17823088 57% /db2/DEV/sapdata4
/dev/sapvg/devsapdata3
41943040 23979664 17823088 57% /db2/DEV/sapdata3
/dev/sapvg/devsapdata2
41943040 23979664 17823088 57% /db2/DEV/sapdata2
/dev/sapvg/devsapdata1
41943040 23979664 17823088 57% /db2/DEV/sapdata1
/dev/sapvg/DEV_LOG_DIR
10485760 5390328 5055680 52% /db2/DEV/log_dir
/dev/sapvg/devdb2dump
3145728 2757168 385592 88% /db2/DEV/db2dump
/dev/sapvg/db2dev 3145728 100224 3021728 3% /db2/db2dev
I have seen these out put has not changed after restoration > db2 get db cfg for DEV
ecldevqa:db2dev 17> db2 get db cfg for DEV
Database Configuration for Database DEV
Database configuration release level = 0x0b00
Database release level = 0x0b00
Database territory = en_US
Database code page = 1208
Database code set = UTF-8
Database country/region code = 1
Database collating sequence = IDENTITY_16BIT
Alternate collating sequence (ALT_COLLATE) =
Database page size = 16384
Dynamic SQL Query management (DYN_QUERY_MGMT) = DISABLE
Discovery support for this database (DISCOVER_DB) = ENABLE
Restrict access = NO
Default query optimization class (DFT_QUERYOPT) = 5
Degree of parallelism (DFT_DEGREE) = 1
Continue upon arithmetic exceptions (DFT_SQLMATHWARN) = NO
Default refresh age (DFT_REFRESH_AGE) = 0
Default maintained table types for opt (DFT_MTTB_TYPES) = SYSTEM
Number of frequent values retained (NUM_FREQVALUES) = 10
Number of quantiles retained (NUM_QUANTILES) = 20
Backup pending = NO
Database is consistent = NO
Rollforward pending = NO
Restore pending = NO
Multi-page file allocation enabled = YES
Log retain for recovery status = NO
User exit for logging status = YES
Self tuning memory (SELF_TUNING_MEM) = OFF
Size of database shared memory (4KB) (DATABASE_MEMORY) = COMPUTED
Database memory threshold (DB_MEM_THRESH) = 10
Max storage for lock list (4KB) (LOCKLIST) = 20000
Percent. of lock lists per application (MAXLOCKS) = 90
Package cache size (4KB) (PCKCACHESZ) = 5120
Sort heap thres for shared sorts (4KB) (SHEAPTHRES_SHR) = 20000
Sort list heap (4KB) (SORTHEAP) = 2048
Database heap (4KB) (DBHEAP) = 35000
Catalog cache size (4KB) (CATALOGCACHE_SZ) = 2560
Log buffer size (4KB) (LOGBUFSZ) = 1024
Utilities heap size (4KB) (UTIL_HEAP_SZ) = 10000
Buffer pool size (pages) (BUFFPAGE) = 10000
Max size of appl. group mem set (4KB) (APPGROUP_MEM_SZ) = 128000
Percent of mem for appl. group heap (GROUPHEAP_RATIO) = 25
Max appl. control heap size (4KB) (APP_CTL_HEAP_SZ) = 1600
SQL statement heap (4KB) (STMTHEAP) = 5120
Default application heap (4KB) (APPLHEAPSZ) = 4096
Statistics heap size (4KB) (STAT_HEAP_SZ) = 15000
Interval for checking deadlock (ms) (DLCHKTIME) = 10000
Lock timeout (sec) (LOCKTIMEOUT) = 3600
Changed pages threshold (CHNGPGS_THRESH) = 40
Number of asynchronous page cleaners (NUM_IOCLEANERS) = AUTOMATIC
Number of I/O servers (NUM_IOSERVERS) = AUTOMATIC
Index sort flag (INDEXSORT) = YES
Sequential detect flag (SEQDETECT) = YES
Default prefetch size (pages) (DFT_PREFETCH_SZ) = AUTOMATIC
Track modified pages (TRACKMOD) = ON
Default number of containers = 1
Default tablespace extentsize (pages) (DFT_EXTENT_SZ) = 2
Max number of active applications (MAXAPPLS) = AUTOMATIC
Average number of active applications (AVG_APPLS) = AUTOMATIC
Max DB files open per application (MAXFILOP) = 1950
Log file size (4KB) (LOGFILSIZ) = 16380
Number of primary log files (LOGPRIMARY) = 20
Number of secondary log files (LOGSECOND) = 40
Changed path to log files (NEWLOGPATH) =
Path to log files = /db2/DEV/log_dir/NODE
0000/
Overflow log path (OVERFLOWLOGPATH) =
Mirror log path (MIRRORLOGPATH) =
First active log file = S0000062.LOG
Block log on disk full (BLK_LOG_DSK_FUL) = YES
Percent max primary log space by transaction (MAX_LOG) = 0
Num. of active log files for 1 active UOW(NUM_LOG_SPAN) = 0
Group commit count (MINCOMMIT) = 1
Percent log file reclaimed before soft chckpt (SOFTMAX) = 300
Log retain for recovery enabled (LOGRETAIN) = OFF
User exit for logging enabled (USEREXIT) = OFF
HADR database role = STANDARD
HADR local host name (HADR_LOCAL_HOST) =
HADR local service name (HADR_LOCAL_SVC) =
HADR remote host name (HADR_REMOTE_HOST) =
HADR remote service name (HADR_REMOTE_SVC) =
HADR instance name of remote server (HADR_REMOTE_INST) =
HADR timeout value (HADR_TIMEOUT) = 120
HADR log write synchronization mode (HADR_SYNCMODE) = NEARSYNC
First log archive method (LOGARCHMETH1) = OFF
Options for logarchmeth1 (LOGARCHOPT1) =
Second log archive method (LOGARCHMETH2) = OFF
Options for logarchmeth2 (LOGARCHOPT2) =
Failover log archive path (FAILARCHPATH) =
Number of log archive retries on error (NUMARCHRETRY) = 5
Log archive retry Delay (secs) (ARCHRETRYDELAY) = 20
Vendor options (VENDOROPT) =
Auto restart enabled (AUTORESTART) = ON
Index re-creation time and redo index build (INDEXREC) = SYSTEM (RESTART)
Log pages during index build (LOGINDEXBUILD) = OFF
Default number of loadrec sessions (DFT_LOADREC_SES) = 1
Number of database backups to retain (NUM_DB_BACKUPS) = 12
Recovery history retention (days) (REC_HIS_RETENTN) = 60
TSM management class (TSM_MGMTCLASS) =
TSM node name (TSM_NODENAME) =
TSM owner (TSM_OWNER) =
TSM password (TSM_PASSWORD) =
Automatic maintenance (AUTO_MAINT) = ON
Automatic database backup (AUTO_DB_BACKUP) = OFF
Automatic table maintenance (AUTO_TBL_MAINT) = ON
Automatic runstats (AUTO_RUNSTATS) = ON
Automatic statistics profiling (AUTO_STATS_PROF) = OFF
Automatic profile updates (AUTO_PROF_UPD) = OFF
Automatic reorganization (AUTO_REORG) = OFF
Before restoration it was "First active log file = S0000062.LOG" and after restoration this parameter has not changed.
db2diag.log >
INSTANCE: db2dev NODE : 000
FUNCTION: DB2 UDB, routine_infrastructure, sqlerFmpListener, probe:999
MESSAGE : FMP exiting with error. Last agent registered:
DATA #1 : Hexdump, 4 bytes
0x9FFFFFFFFFFFEEE4 : 0000 0000 ....
2008-01-30-10.34.12.283359+330 I2618633502A1630 LEVEL: Event
PID : 12514 TID : 1 PROC : db2start
INSTANCE: db2dev NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
DATA #1 : String, 31 bytes
/db2/db2dev/sqllib/adm/db2star2
DATA #2 : Hexdump, 256 bytes
0x9FFFFFFFFFFFBBC0 : 2F64 6232 2F64 6232 6465 762F 7371 6C6C /db2/db2dev/sqll
0x9FFFFFFFFFFFBBD0 : 6962 2F61 646D 2F64 6232 7374 6172 3200 ib/adm/db2star2.
0x9FFFFFFFFFFFBBE0 : 4E4F 4D53 4700 0000 0000 0000 0000 0000 NOMSG...........
0x9FFFFFFFFFFFBBF0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC00 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC10 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC20 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC30 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC40 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC50 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC60 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC70 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC80 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC90 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBCA0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBCB0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
2008-01-30-10.34.14.121256+330 E2618635133A1198 LEVEL: Event
PID : 12517 TID : 1 PROC : db2star2
INSTANCE: db2dev NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2dev" uses "64" bits and DB2 code release "SQL09011"
with level identifier "01020107".
Informational tokens are "DB2 v9.1.0.1", "s061104", "U809678", Fix Pack "1".
DATA #2 : System Info, 104 bytes
System: HP-UX ecldevqa B.11.23 U ia64
CPU: total:6 online:6 Threading degree per core:1
Physical Memory(MB): total:16354 free:9294
Virtual Memory(MB): total:49122 free:42062
Swap Memory(MB): total:32768 free:32768
Kernel Params: msgMaxMessageSize:65535 msgMsgMap:2048 msgMaxQueueIDs:512
msgNumberOfHeaders:2046 msgMaxQueueSize:65535
msgMaxSegmentSize:96 shmMax:17179869184 shmMin:1 shmIDs:400
shmSegments:300 semMap:2050 semIDs:2048 semNum:4096
semUndo:1024 semNumPerID:2048 semOps:500 semUndoPerProcess:100
semUndoSize:824 semMaxVal:32767 semAdjustOnExit:16384
2008-01-30-10.34.50.661312+330 I2618636332A365 LEVEL: Warning
PID : 12533 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-7 APPID: *LOCAL.db2dev.080130050450
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleCheckForRestore, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.34.50.662169+330 I2618636698A373 LEVEL: Warning
PID : 12533 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-7 APPID: *LOCAL.db2dev.080130050450
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqlePrepareForSerialization, probe:20
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.34.50.662288+330 I2618637072A353 LEVEL: Severe
PID : 12533 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-7 APPID: *LOCAL.db2dev.080130050450
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleserl, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.43.19.986356+330 I2618637426A365 LEVEL: Warning
PID : 12532 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-10 APPID: *LOCAL.db2dev.080130051319
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleCheckForRestore, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.43.19.987187+330 I2618637792A373 LEVEL: Warning
PID : 12532 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-10 APPID: *LOCAL.db2dev.080130051319
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqlePrepareForSerialization, probe:20
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.43.19.987305+330 I2618638166A353 LEVEL: Severe
PID : 12532 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-10 APPID: *LOCAL.db2dev.080130051319
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleserl, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
ecldevqa:db2dev 20>
Thanks & Regards,
Gautam Poddar
SAP BASIS
PricewaterhouseCoopers (P) LimitedHi Gautam
As Adam said ....
1. never manually move db2 active log files
2. IBM does not support filesystem restores.
The only solution for you is to restore the offline backup and if you have archive logs, then you can do a rollforward .
Amit
Edited by: amit chak on Aug 19, 2008 8:07 PM -
My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?
That's usually a symptom of a phone that was hacked or jailbroken to unlock it.
Maybe you are looking for
-
How to know the excess stock with in a sales order and line item
Hi, i am running an MRP against a sales order and sales order line item. the materials are getting planned based on the requirement. but due to some reasons the production orders are confirmed with out consumption of the actual required quantit
-
VFX3 ERROR:Enter a Name and City for one-time account postings (F5 266)
Dear Colleagues. Finance are teying to release a billing doc to Finance on VFX3 and getting the error below.Is it something not maintained correctly somewhere (Customer Master,etc)? All help greatly appreciated, PAPJ1 Error Log 001005670
-
my gen 4 iPod doesn't charge, the usb cable is good(works on other apple products) What should i do?
-
ECM Plan Compensation Program Screen MSS
Hi Experts , We are implementing ECM and we have requirement that in MSS when manger of X country logs in and plans for compensation program , its ask to select the compensation review from the dropdown list . Currently it shows all the compensation
-
Private strand flush not complete how to find optimal size of redo log file
hi, i am using oracle 10.2.0 on unix system and getting Private strand flush not complete in the alert log file. i know this is due to check point is not completed. I need to increase the size of redo log files or add new group to the database. i hav