43 'C is high for AMD64 2800+?

I have an AMD64 2800+ with K8T Neo-FIS2R motherboard and my ide temperature for my CPU is 43 'C and 40 'C for system temperature. I didn't use the stock heat stink....I used Zalman CNPS7000-AlCu with Artic Siliver 5 thermal paste. I set my Zalman to normal mode (2500 RPM). I didn't enable Cool and Quiet and the temperatures come from Core Center. My BIOS is 1.71. Is this too hot for AMD 64 2800? Thank You for the replies!!! I have a clawhammer. My room temperature is around 24 'C

Quote
Originally posted by clickart
CPU is 43 'C and 40 'C for system temperature.
Doesn't look strange to me, what's the temps under full load?
Please add a sig with your full system specs

Similar Messages

AMD64 2800+ & MSI K8T NEO Freezing !!

AMD64 2800+ (stock cooling) (socket 754)
MSI K8T Neo (Chipset : VIA K8T800)
1x 512 DDR 400MHz PC 3200
1x WD SATA 160gb 7200 RPM, 8mb cache (disk fans)
1x WD IDE 40gb 7200 RPM, 2mb cache
Leadtek Winfast 6600GT (Extra power molex)
Terratec TV Value
PSU 350W (''unnamed'' PSU (Vikings..) (i think it's PSU Problem)
2x 80mm FANS
Nothing is Overclocked.
1.)
PC is freezing randomly, but i have launched memtest, and burn in test for cpu, it was on all the night and no errors,,
Probably it's the PSU problem not giving enough power, i have this problems since i've installed my new 6600GT, and new disk. (SATA)
2.)
. I have disabled all the WAKEUP things in BIOS and Windows(NEtwork card) if i SHUTDOWN MY PC, it randomly turns on after I do SHUTDOWN ?? after a minute?? and sometimes not :S i don't really know what's the problem, but i'm aiming at PSU, i have tried many things... What do you guys think?
PSU Stats are :
+5V = 30A
+12V= 15A
-5V = 0.5A
-12V = 0.8A
+3.3 = 14A
+5 VSB = 2A
+5&+3.3 V = TOTAL OUTPUT 180W
OUTPUT MAX = 350 W
Stats of my PSU, that is now in !
Can 350W Noname PSU handle normally and stable my sistem?
i personally think problem is at PSU
(I'm looking forward to BUY LC 550W...)
Any suggestions?

1.) Yes i have disabled all the WakeUP Things :S
Should be unstable Power / Bad PSU ?
2.)
Probably this should be the problem -> recommend at least 400W, at least 20A on 12v.... amd uses more 12v lines, i think this my 350w noname should be the prob !!
https://forum-en.msi.com/index.php?topic=46719.0
Any more suggestions, so i should go for a NEW PSU for sure?
And what PSU gimme links :P what's the best.. (Price/Performance)
I'm looking at LC 550W, pro's / contras?
''Power'' : ''550 Watts''
+3.3 V: 32A
+5.0 V: 40A
+12.0 V: 24A
-5 V: 0,5A
-12 V: 1A
+5Vsb: 2,0A
http://www.lc-power.com/htm/products_detail.php?lang=2&h_id=1&u_id=2&a_id=26
.. TY !!!

How to measure the time a pulse is high for?

I am using Pulse measure.vi to measure the output of a comparator. My comparator output feeds to an LED. The duty cycle is 50% so the LED just flashes on and off. I want to measure the time the output is high ('ON time') and I have been getting this by just multiplying the pulse width measure by the no. of pulses but I want to modify it to measure the 'ON time' of random signals with different duty cycles...
The aim is that I am taking in a signal and need the LED to turn on when the signal 'ON time' reaches a certain specified time.
But before I continue with the LED I am wondering how to add up the time the signal is high for?

Hi PinkLady4218,
You should be able to use one of the shipping examples to do what you need, please open LabVIEW and go to Help >> Find Examples.
From the Example Finder please go to Hardware Input and Output >> DAQmx >> Counter Measurements >> Period or Pulse Width >> Meas Buffered Semi-Period-Continuous.vi
You will then need to deinterleave the output array as it will show high time then low time then high time then ...
You will need to confirm the order these values appear and then you can use a function from the arrays palette and use the function "Decimate 1D Array"
Regards
JamesC
NIUK and Ireland
It only takes a second to rate an answer

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

File size extremely high for .avi after render PE 9

I'm very new to PE and have tried to learn quick to redact info (faces etc) in .avi files for a government agency. I was able to open the file (in the trial version) and make the track matte by dragging the original file to the timeline then dragging it again to the video 2 timeline for the top layer, Question 1) is this the same as copy and paste or am I doubling the size already? Anyway, I was able to get the matte and everything done. Now, to Render and save... I choose computer/avi again (I need to keep it the same) and it took 1 hr 45 min to render it, that seemed long to me but maybe not... but mainly the file size was then 100,883 kb! Starting with a 29.7 kb file. This is what my question is about....could this be right? I can't use it if this is what I get. So, here are the particulars as I got G-spot and looked it up, as per serveral suggestions I saw here. I'm trying to understand the CODEC info but I fear I have a ways to go before I can figure out what I did wrong. (This is my test computer, the future work would be done on a newer, better computer). The videos I would be working with come from various sources and will vary in length but will probably all be a kind of avi.
Intel Pentium processor 1600 mhz
221 mhz, 2.00 gb ram
Microsoft windows xp sp3
video:
length: 0:27.261
frms: 817
Kbps: 28770
pic: 720x480
codec: dvsd dvc/dy
I appreciate any help you can give

Thanks for you response and the information was very helpful. I was able to choose and output that gave me a good file size and I do want DV-AVI (I don't remember what I chose but it worked) but, I don't see an option for DV-AVI - is that a general DV output selection, because there seem to be numerous (AVCHD, NTSC, DV STANDARD) acronyms (I have tried to understand what each is) which do I want?
From: Bill Hunt <[email protected]>
To: Mid Century Modern <[email protected]>
Sent: Wednesday, September 28, 2011 6:07 PM
Subject: File size extremely high for .avi after render PE 9
Re: File size extremely high for .avi after render PE 9 created by Bill Hunt in Premiere Elements - View the full discussion
For the use of Track Matte Keying, with say a Gaussian Blur, or maybe Moasic Effect, if you have not altered the In & Out Points, then just dragging the Asset to both Video 1 and Video 2 will work fine. If you HAVE adjusted the In & Out Points, you can just click-drag from the Source Monitor, where you set those In & Out Points, and all is good. The Copy/Paste is just another way to do it.
As you are doing an "overlay," the output File Size will not be affected in any way. You are also limiting the Blur, or Effect on Video 2 to just the area "exposed" by the Track Matte, so the pixel count will not be altered.
As Steve points out, the output CODEC in the AVI will determine the output File Size. File Size is basically determined by the Timeline's Duration and by the Bit-Rate of the output file. With DV-AVI, that Bit-Rate is pretty well set, and your Timeline determines the Duration. At ~ 13GB/hour, a DV-AVI will be pretty large, but that is the nature of the beast. Also, and as Steve points out, if you are going to do additional editing, and will be Importing that file into a New Project, DV-AVI is about as good, as it gets.
Good luck,
Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3943683#3943683
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3943683#3943683. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

SMART DATA--A little High for my tastes

Hi I have a 5.5g ipod that is 80 gigabytes. I want to know if my smart values seem normal for having it for one month.
I have 91 Retracts
36 reallocs
49 power on hours (I know that higher is better for this value)
Start/Stops 2576 (seems very high for only having it a while)
I do use iPod Linux, so if using this would cause some of these values, do let me know. I am fairly technical so dont be afraid to use big words with me.
All in all the ipod works fine, and has given me no problems.
I have not dropped it ether.

Please use code tags when pasting to the boards:
https://wiki.archlinux.org/index.php/Fo … s_and_Code

Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".

Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".

Both are great machines but have rather different purposes...while the graphics are good on the MBP, the iMac graphics would be a major step up. Especially if you want to do heavy duty photo or video work, and heavy game use. If the MBP is getting hot and running the fans hard, that would point you to the iMac with its higher end graphics capability.
The photo and video work would be much easier with the larger screen and higier end graphics and faster cpu.

PGC has an error--data rate of this file is too high for DVD

Getting one of those seemingly elusive PGC errors, though mine seems to be different from many of the ones listed here. Mine is telling me that the data rate of my file is too high for DVD. Only problem is, the file it's telling me has a datarate that is too high, is a slideshow which Encore has built using imported jpg files. I got the message, tried going into the slideshow and deleting the photo at the particular spot in the timeline where it said it had the problem, now getting the same message again with a different timecode spot in the same slideshow. The pictures are fairly big, but I assumed that Encore would automatically resize them to fit an NTSC DVD timeline. Do I need to open all the pictures in Photoshop and scale them down to 720x480 before I begin with the slideshows?

With those efforts, regarding the RAM, it would *seem* that physical memory was not the problem.
I'd look to how Windows is managing both the RAM addresses and also its Virtual Memory. To the former, I've seen programs/Processes that lock certain memory addresses upon launch (may be in startup), and do not report this to Windows accurately. Along those lines, you might want to use Task Manager to see what Processes are running from startup on your machine. I'll bet that you've got some that are not necessary, even if IT is doing a good job with the system setup. One can use MSCONFIG to do a trial of the system, without some of these.
I also use a little program, EndItAll2 for eliminating all non-necessary programs and Processes, when doing editing. It's freeware, has a tiny footprint and usually does a perfect job of surveying your running programs and Processes, to shut them down. You can also modify its list, incase it wants to shut down something that IS necessary. I always Exit from my AV, spyware, popup-blocker, etc., as these progams will lie to EndItAll2 and say that they ARE necessary, as part of their job. Just close 'em out in the Tasktray, then run EndItAll2. Obviously, you'll need to do this with the approval of IT, but NLE machines need all available resources.
Now, to the Virtual Memory. It is possible that Windows is not doing a good job of managing a dynamic Page File. Usually, it does, but many find there is greater stability with a fixed size at about 1.5 to 2.5x the physical RAM. I use the upper end with great results. A static Page File also makes defragmenting the HDD a bit easier too. I also have my Page File split over two physical HDD's. Some find locating to, say D:\ works best. For whatever reason, my XP-Pro SP3 demanded that I have it on C:\, or split between C:\ and D:\. Same OS on my 3 HDD laptop was cool having it on D:\ only. Go figure.
These are just some thoughts.
Glad that you got part of it solved and good luck with the next part. Since this seems to affect both PrPro and En, sounds system related.
Hunt
PS some IT techs love to add all sorts of monitors to the computers, especially if networkded. These are not usually bad, but are usually out of the mainstream, in that most users will never have most of these. You might want to ask about any monitors. Also, are you the only person with an NLE computer under the IT department? In major business offices, this often happens. Most IT folk do not have much, if any, experience with graphics, or NLE workstations. They spend their days servicing database, word processing and spreadsheet boxes.

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.

I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade

Hi Guru,
I' am doing prepare : upgrade from R/3 entrerprise 47X100 to ECC6.0 SR3.
PREPARE
02)                       Initialization     failed        yes
the checks.log report the following error :
SAPup> WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this
upgrade (> 2005_1_700).
                To avoid loss of data it is necessary to include the latest avai
lable version for the Add-on
                in the IS_SELECT phase.
                Please refer to Add-on note 69455 for further information.
I can't go on , How can I include the add-on in the upgrade ? the phase for include the add-on upgrade is 04) Extension   but i cannot skip phase 2    ? ! ? !
OSS note 69455 does not contain valid information.
thank's for the answer.
Regards Antonio.

Hi
I got the same error and it actually prevents from getting further, because its treated as an error.
"ERROR: To be able to use ASU Toolbox, your system requires at
       least Support Package Level 8 for the ST-PI software component
       For more information, see the upgrade documentation
WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade (> 2005_1_700).
         To avoid loss of data it is necessary to include the latest available version for the Add-on
         in the IS_SELECT phase.
         Please refer to Add-on note 69455 for further information."
2008_1_620 does not have a level 8, so it must be refering to the 2005 version of ST-PI.
Update SAPup.exe (in <upgrade dir>/bin) to newest version.
Regards
Kim
Edited by: Kim Hynek on Mar 30, 2010 11:36 AM
Edited by: Kim Hynek on Mar 30, 2010 11:40 AM

Last pulse high for longer period of time

Hi guys
Me again with another problem.
I am attaching the VI with the post. Now the VI generating pulses of 100 Hz frequency(clock, which is connected to signal generation block). Now all the 63 pulses are coming correctly but last pulse high for almost 30 mSec. I could not find a solution. Could DAQ task is not be clearing properly??? I am at lost...Any help???? Thanks in advance.....
Attachments:
telecommand_1.vi ‏62 KB

You have to change the numeric constant (connected to the "Eaqual to")from 63 to 62 in your for loop. Remember that "i" starts with the value 0. Since the for loop runs 63 times you will never get 63 as value for "i".
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway

Feedback on amazonmp3 for amd64

Hey folks, I've put together an amazonmp3 pkgbuild for amd64 machines and I'd like to get some feedback and help polishing it. It grabs the packages required from the ubuntu repositories and puts everything into /opt/amazonmp3/. There's also a script /usr/bin/amazonmp3 that sets environmentals and calls the binary in opt.
Currently I'm not sure if I got all the dependencies correct and several of the files installed I just stole from the current amazonmp3 pkgbuild.
Not sure why the current amazonmp3 build has x86_64 in arch since it points the boost stuff at /usr/lib and I'm fairly sure we don't have lib32- for boost and gtkmm.
In any case, once verified I haven't done anything stupid I'll put this up on aur.
It seems okay as I've tested it on my machine and successfully downloaded an album.
# Contributor: Chris Schwaab christopher.schwaab gmail
pkgname=amazonmp3-amd64
pkgver=1.0.3
pkgrel=1
pkgdesc="The MP3 downloader with self contained library deps for amd64."
url="http://www.amazon.com/gp/dmusic/help/amd.html"
arch=('x86_64')
license=('custom')
depends=('bash' 'lib32-libxdamage' 'lib32-curl' 'lib32-pango' 'lib32-gtk2')
makedepends=('deb2targz')
provides=('amazonmp3')
conflicts=('amazonmp3')
source=('http://mirrors.kernel.org/ubuntu/pool/main/g/gtkmm2.4/libgtkmm-2.4-1c2a_2.12.0-0ubuntu1_i386.deb'
'http://mirrors.kernel.org/ubuntu/pool/main/c/cairomm/libcairomm-1.0-1_1.2.4-2_i386.deb'
'http://mirrors.kernel.org/ubuntu/pool/main/g/glibmm2.4/libglibmm-2.4-1c2a_2.14.0-0ubuntu1_i386.deb'
'http://mirrors.kernel.org/ubuntu/pool/main/libs/libsigc++-2.0/libsigc++-2.0-0c2a_2.0.17-2ubuntu2_i386.deb'
'http://security.ubuntu.com/ubuntu/pool/universe/b/boost/libboost-date-time1.34.1_1.34.1-2ubuntu1.1_i386.deb'
'http://security.ubuntu.com/ubuntu/pool/universe/b/boost/libboost-signals1.34.1_1.34.1-2ubuntu1.1_i386.deb'
'http://security.ubuntu.com/ubuntu/pool/universe/b/boost/libboost-iostreams1.34.1_1.34.1-2ubuntu1.1_i386.deb'
'http://security.ubuntu.com/ubuntu/pool/universe/b/boost/libboost-thread1.34.1_1.34.1-2ubuntu1.1_i386.deb'
'http://amazonm-002.vo.llnwd.net/u/d1/clients/amazonmp3_1.0.3~gutsy_i386.deb'
'http://security.ubuntu.com/ubuntu/pool/main/b/bzip2/libbz2-1.0_1.0.4-0ubuntu2.1_i386.deb')
md5sums=('d3856f10fdecee58656263157ab3b68d'
'dcc40c10a2ae127e088db9ec08d91e7e'
'cd8ac50ac2347e9d9408eab68501c5cc'
'3730b46f495a27598966a864bea8a0ca'
'0ecf7a773aec14a63e1b7c7169a72c22'
'ea127e805b17bfc616794c6860bc8304'
'b9415e35d293f5f28d340cb5fb63d34e'
'6a02ddcea0b9bb305bfe5ca9311d223a'
'0a9b986e2e9ba5be7e412e9742688ebb'
'e19195eb92daaa687cb2072672201c25')
build() {
deb2targz libgtkmm-2.4-1c2a_2.12.0-0ubuntu1_i386.deb \
libcairomm-1.0-1_1.2.4-2_i386.deb \
libglibmm-2.4-1c2a_2.14.0-0ubuntu1_i386.deb \
libsigc++-2.0-0c2a_2.0.17-2ubuntu2_i386.deb \
libboost-date-time1.34.1_1.34.1-2ubuntu1.1_i386.deb \
libboost-signals1.34.1_1.34.1-2ubuntu1.1_i386.deb \
libboost-iostreams1.34.1_1.34.1-2ubuntu1.1_i386.deb \
libboost-thread1.34.1_1.34.1-2ubuntu1.1_i386.deb \
libbz2-1.0_1.0.4-0ubuntu2.1_i386.deb \
amazonmp3_1.0.3~gutsy_i386.deb
tar -xzf libgtkmm-2.4-1c2a_2.12.0-0ubuntu1_i386.tar.gz
tar -xzf libcairomm-1.0-1_1.2.4-2_i386.tar.gz
tar -xzf libglibmm-2.4-1c2a_2.14.0-0ubuntu1_i386.tar.gz
tar -xzf libsigc++-2.0-0c2a_2.0.17-2ubuntu2_i386.tar.gz
tar -xzf libboost-date-time1.34.1_1.34.1-2ubuntu1.1_i386.tar.gz
tar -xzf libboost-signals1.34.1_1.34.1-2ubuntu1.1_i386.tar.gz
tar -xzf libboost-iostreams1.34.1_1.34.1-2ubuntu1.1_i386.tar.gz
tar -xzf libboost-thread1.34.1_1.34.1-2ubuntu1.1_i386.tar.gz
tar -xzf libbz2-1.0_1.0.4-0ubuntu2.1_i386.tar.gz
tar -zxf amazonmp3_1.0.3~gutsy_i386.tar.gz
mkdir -p $pkgdir/opt/amazonmp3
mkdir -p $pkgdir/usr/share/doc/amazonmp3
mkdir -p $pkgdir/usr/share/mime-info/
tar -cf - -C lib ./ | tar -xf - -C $pkgdir/opt/amazonmp3
tar -cf - -C usr/lib ./ | tar -xf - -C $pkgdir/opt/amazonmp3
cat > amazonmp3 <<__EOF__
#!/bin/bash
export GTK_PATH=/opt/lib32/usr/lib/gtk-2.0
export GDK_PIXBUF_MODULE=/opt/lib32/config/gdk/gdk-pixbuf.loaders
export PANGO_RC_FILE=/opt/lib32/config/pango/pangorc
export LD_LIBRARY_PATH=/opt/lib32/usr/lib:/opt/amazonmp3:\$LD_LIBRARY_PATH
/opt/amazonmp3/amazonmp3
__EOF__
install -D -m644 usr/share/doc/amazonmp3/license.html \
$pkgdir/usr/share/licenses/amazonmp3-amd64/license.html
install -D -m755 amazonmp3 $pkgdir/usr/bin/amazonmp3
install -D -m755 usr/bin/amazonmp3 $pkgdir/opt/amazonmp3/amazonmp3
install -D -m644 usr/share/applications/amazonmp3.desktop \
$pkgdir/usr/share/applications/amazonmp3.desktop
install -D -m644 usr/share/doc/amazonmp3/* \
$pkgdir/usr/share/doc/amazonmp3
install -D -m644 usr/share/mime/packages/amazonmp3.xml \
$pkgdir/usr/share/mime/packages/amazonmp3.xml
install -D -m644 usr/share/mime-info/* \
$pkgdir/usr/share/mime-info/
install -D -m644 usr/share/mimelnk/audio/x-amzxml.desktop \
$pkgdir/usr/share/mimelnk/audio/x-amzxml.desktop
install -D -m644 usr/share/pixmaps/amazonmp3.png \
$pkgdir/usr/share/pixmaps/amazonmp3.png
Thanks.
Last edited by lpjhjdh (2008-12-14 18:52:44)

Hey thanks a lot! I've now removed everything that I previously needed a chroot for!
The only issue with the PKGBUILD was that it didn't automatically download and install the dependencies: aka deb2targz, lib32-curl, etc. It just stopped with a "ERROR Could not resolve all dependencies". But as soon as I installed them manually, the rest of the PKGBUILD worked great!
Thanks! Look forward to seeing it in the AUR!
Scott

Turbolinux 8 for AMD64 and 32bit oracle9i

Anybody have installed oracle 9.2.0.1.0 on Turbolinux 8 for AMD64 ? I tried it,but i never succeed.
When i began to install,it showed error"can't find libjava.so".When i set the parameter JAVA_HOME,the error still appeared.Please give me some advice,thanks!

I have Oracle Enterprise Edition loaded on dual processor Pentium 133 with 128MB ram running Slackware 8.1.
It installed with no problems. Oracle 8.1.7 is a different story though.

How can I get version 5.0 or higher for my I pad

how can I get version 5.0 or higher for my I pad 2

Reader 10.4.4 is available from the iTunes Store.

MARS - inbound packet error rate high for unrouted VLAN

After upgrade to 4.2.2, we are getting lots of inbound packet error rate high for some unrouted vlan in Cisco 6509. I did some sniff and find that MARS try to get ifInErrors of those unrouted vlan. But the unrouted vlan only support ifOutUcastPkts and ifInUcastPkts.
I just wondering is there some bug in the MARS or there are some kind of database corruption.

Any reason you wouldn't just create a drop rule or modify the inspection rule that is firing?
btw, have a look here to make sure it isn't the same issue:
http://groups.google.com/group/cs-mars-ug/browse_thread/thread/9431fe079f7245ef/f4516dea991132da?lnk=gst&q=ingress&rnum=1#

43 'C is high for AMD64 2800+?

Similar Messages

Maybe you are looking for