4305g Internal Storage not being recognized

I have a dozen or so DMP 4305g devices and one of them stopped recognizing the internal storage, this is the second or third one I have had do this. Has anyone ran into this problem, do they have a solution? I did a factory reset and nothing. Im up-to-date on all my patches. I dont know what else to do besides get the device and send it back.

Sorry for the Delay....
======================
DMP Models affected: DMP-4305G
Symptom:
DMP flash shows internal storage capacity 0/0 on the DMP-DM and
the DMM-DSM.
On the DMP-DM, The Internal Storage values will
show:
Present     = No
Access Mode = Read Only
Capacity    = 0
Free Space = 0
Possible Causes:
1. The DMP kernel is not detecting the SD flash card after soft reboot.
2. If the SD card coming up Ready Only(RO) - this could be a timing issue
   because the DMP is running fsck on the SD flash card while it's trying
   to mount it, causing RO.
3. Manufacturing is creating the DMPs with SD flash cards of VFAT formatting
   instead of EXT2
4. There has been shipping related problems, as the SD flash card might be
    coming loose and dislodging. As a result, the SD flash card NOT mounting.
5. SD flash card hardware failure itself.
Workaround\Fix:
For Cause #1
"Hard" reboot would always fixed this.
This is mostly solved in 5.2, with the latest kernel patch.
For Cause #2
This can be resolved via MIB variables.
TAC or Support engineer can SSH to the DMP and run the "mount"
command to see if the SD flash card mounts.
For Cause #3
Please Open a Cisco TAC Case to have the DMP RMA'd.
For Cause #4
Please Open a Cisco TAC Case to have the DMP RMA'd.
** NOT supported but a support engineer could open the DMP
to see & verify that the SD flash card has NOT dislodged.
Reseat SD flash card.
For Cause #5
Please Open a Cisco TAC Case to have the DMP RMA'd.
IMPORTANT NOTE TO REMEMBER:
Open a Cisco TAC Case to have the DMP RMA'd seems to be the
official/legal/contractual way for recovering this issue, since opening
a DMP voids its warranty.
We will need to capture this data so we can determine root cause and trace back to source.
Especially with the rate you are outlining here this is something we need to investigate.
However if the adhesive holding the SD cards is broken the investigators may question that.
Please do not tamper with any DMP's so they can be investigated properly.
Cheers
T.

Similar Messages

[OVM 3.0.1] Visibly attached FC storage not being recognized by VM manager

This is my first real trek into Oracle VM so please be gentle.
I have an SCST based FC target that I can see is visibly attached to my OVS server. It's picked up as /dev/sdc but not matter how many times I reboot the OVS server, I can't get OVM to even see it. So i'm obviously missing something OR my LUN simply isn't supported. Anyone have any ideas?
Thanks,

I have the same issue though my multipthd is running. Restarting the daemon did not help. Any idea? Thanks
# multipath -ll
DM multipath kernel driver not loaded
# service multipathd status
multipathd (pid 5370) is running...

Devices with Removable Storage - not being read or recognized.

Good morning:
My PC is HP Pavilion m7640n.
Specifically LITE-ON DVDRW SHM-165H6S is not reading DVDs or CDs.
Tried to download driver but there are instructions I do not understand involving a required CD.
Any thoughts about why the "Devices with Removable Storage" are not being recognized?
Cheers,
Jamie

A few things you could try:
1.Use a different port and recheck the issue.
2. You may try the same on a different computer.
3.If the above doesn't help then get the device checked by an authorised service centre.
S.Sengupta, Windows Entertainment and Connected Home MVP

Canon G9 not being recognized by MacBook Pro

I'm having some issues with a Canon G9 not being recognized by the particular MacBook i have to use. When i connect the G9 via USB (obviously with a good cable and camera switched on) neither Image Capture nor iPhoto recognize it. I have tried connecting the camera to a bunch of other macs (Powerbooks, latest MacBook, same model of Macbook and system as the one I'm using), they all didn't have any trouble recognizing the camera. My MaProxy-Connection: keep-alive
Cache-Control: max-age=0
ook can see any other camera I have tried without trouble... I'm using 10.5.6...
The System Profiler does actually see something being connected via USB, but it only shows up as "Composite-Device/0x04a9(Canon Inc.)".
Any ideas what might cause the issue?
Message was edited

Updated information ... these card do get read on an older iMac, circa 2010 or so, also running 10.8.4. For some reason, they're not being read by the internal SD reader on the macbook pro. Odd.

My Powerbook G4 Is not being recognized as a potential Startup Disk by my M

My old Powerbook G4 laptop (3 years old)
Is not being recognized as a potential Startup Disk by my Mac pro,
it is however being recognized as an external hard drive
any help , ideas ???

Hi
You won't be able to start up your Mac Pro from your Powerbook drive since one uses Intel disk partitioning and the other uses old-style Apple partitioning.
As you've found, you can still read the drive as a storage drive.
Matt

Ipod touch not being recognized by itunes now

i have a friend who has an ipod touch....everything had been going fine for him and then all of a sudden it was not being recognized any more....what caused this? he did say that he had done an update but i'm not sure what version he has....could this possibly be the problem.....does anyone an a fix for this?

I think Apple is having a problem at the moment, my Ipod touch was always fine syncing until the new update! (Even on older itunes version, I could'nt sync since new update came out) It just isnt recognizing the device...
Ive done all that Apple says to do, none of which helps at all, I reckon its thier own side of the problem they need to fix...

IPod touch not being recognized by iTunes on my MacBook, and on 2 other PCs

Hello,
After scouring the web and these discussion forums to no avail, I've decided to post my problem. I downloaded iTunes 8.0 yesterday, and updated the firmware on my iPod Touch to 1.1.5. I tried connecting my iPod, and nothing happened. It is not being recognized by my MacBook. So, I tried using another USB iPod connector, and nothing happened. I tried using a firewire connector, and nothing happened. Frustrated, I tried connecting to my one roommate's HP laptop and see if it would get recognized there - no. I then tried on my other roommate's laptop. The device was recognized to be USB, but iTunes wouldn't go ahead and try and reformat it. I'm starting to lose my mind! I've tried resetting the iPod touch itself loads of times to no success. I've tried restarting while having the iPod connected to the computer, and still nothing.
What should I do now?

Sorry about not getting to you on the quick-fast, but we aren't Apple employees.
What ended up being the solution you needed, as you said, you couldn't find any information already posted on this problem, so documenting your fix may help someone in the future.

Why isn't my iPod 6th generation not being recognized by iTunes?

Why isn't my iPod 6th generation not being recognized by iTunes?

Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

TS3716 ipod nano is not being recognized by iTunes.

My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
Any suggestions?

Does the iPod work OK?
Have you tied resetting the iPod? Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Next would be to place the iPod in recovery mode and then restore via iTunes. If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Ipod not being recognized on the system, not getting reset,retry,restore,..

hi all
my ipod is not being recognized on the system..
i dont know wat is the problem
i tried the 5 Rs thing and i didn't get any king of result..
i dont know wat to do
please someone who could find a solution for this please reply and send me the solutions
thanks..
bye.

See this...
Windows Does Not Recognize iPod
btabz

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

My iPod is stuck on the Apple logo and won't do anything! It won't turn on, doesn't give me the option to power it off, and to top it all off, it's not being recognized by my computer OR by iTunes when I plug it into my computer.

So yeah...last night I was checking out my iPod (bored at the in-laws) and all of a sudden the screen went blank and the only thing I can get it to do is have the black screen w/ the white apple logo on it. It won't turn on, doesn't give the the option to power down, it won't charge, AND it's NOT being recognized when I plug it into my computer. Not by iTunes OR my computer. I've tried holding down the top button and the home button at the same time...nothing. And since it's not being recognized on my computer, I cannot restart it or go back to factory settings. Someone please help! I've had it for 18 months so the warranty is no longer valid and I don't know how to fix it. THANK YOU in advance!

- I would try placing the iPod in recovery mode and then see if iTunes will see the iPod. try both with the iPod not connected to the computer and with it connect. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next see if placing the the iPod in DFU mode will make it visible
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

Have you tried each and every single suggestion in this Apple support document yet?
iPod not recognized in 'My Computer' and in iTunes for Windows
Has this iPod Shuffle ever been able to successfully connect with this PC and sync with iTunes or is the first time you are connecting the iPod Shuffle to this PC?
B-rock

4305g Internal Storage not being recognized

Similar Messages

Maybe you are looking for