430exII fires twice in Manual mode on radio triggers??????? I need it to stop!

I've been using 430exII on radio recievers and have had no problems until now. I have it set to manual mode, on same channel as transmitter, didn't mess with any custom funcions, but am getting a double burst. How can I stop this?
Solved!
Go to Solution.

Which radio triggers are you using? Not sure how much Canon is going to help with 3rd party triggers.
So it's only happening with one of your flashes? What if you put that trigger on a different flash? That way you can narrow down the flash or the trigger. If it's the trigger I'd start with the battery. Cheap triggers like the Yongnuos act funky when the battery starts to die. I'd also double check your transmitter and receiver contacts, they can make things act up as well. Pull them all the way off, all the way on snug and lock.
If it's the 430 acting up I'm not even sure where to start. Batteries, contacts for corrosion, the usual stuff I guess. See if it works properly on camera. If your transmitter allows a test fire try that manually and see if it still double fires.

Similar Messages

Help with manual mode of Menu Widget in Muse

I'm building a family web page in Muse and I'd like to create a menu of my secondary webpages only. Since the Menu Widget's "menu type" options are Top Level pages, All Pages (neither option will work for me), and Manual- it seems like I should be able to use "Menu Type: Manual" and simply type in the menu items I would like- which I've done. What I can't figure out is how to link those menu items I manually created to the sub pages of my website.
A bit of background on my website structure. My top Level sites are: Welcome, and then 3 separate pages for each family member- and each member page has a few secondary pages (about, photos, contact):
Welcome
Member 1
about
photos
contact
Member 2
about
photos
contact
Member 3
about
photos
contact
My main site navigation- i.e. the menu widget for top level pages- is above my header (Light Gray). Below my header, I would like a horizontal or bar menu for ONLY the sub pages of that member: ie. About Member 1, Member 1's Photos, Contact Member 1 (Dark Gray)
I've created a menu widget in the Manual mode- I just can't seem to figure out how to link each menu option to the correct page. Currently in preview none of these manual menu items work.
Thanks!
LScarff

Hi Scarff.
When you opt to use manual mode for the Menus, you need to manually link the pages to menu items. To achieve this , you need to have the menu item selected and then using hyperlink option as shown in below screenshots link the corresponding page to it :
I hope this helps.
Regards
Anshul

List of triggers which fire in enter query mode?

hello experts , please tell me list of forms trigger which fire in enter query mode?
thanks
yash

I don't believe there is a published list, but if you check the Forms help system the description of each trigger will tell you if it fires in "Enter Query" mode. Unfortunately, you will need to check each trigger in the help system and build your own list.
Craig...

HELP: ADF-Error in Entity Validation - Validation fires twice

Hi there,
I have problems with the entity validation in JClient when I have more then one UI-Element that references to the same Data Control / Model Attribute within one panel.
E.g. I have a table where I display all customers. Above the table I show detail information with editable JTextFields for the customer I've selected in the table. When I change the name of a customer and leave the textfield, the new Value appears also in the table. Thats all ok.
The problem:
The entity validation fires twice in that example. E.g. when I insert 30 characters in the name field, but the corresponding database column only stores 20 characters, the
displayed exception appears twice. When I remove the textfields from the panel
and edit the values direct in the table, the validation only fires one time.
How can I avoid that behaviour? I have a lot of screens where it is important to show the list of objects in a table and let edit specific data via text fields.
That behaviour is also reproducable with the ADFJClientComponentDemo
(Jtree binding demo). If you insert more characters than allowed in the firstname field,
the Exception Message is shown twice.
Thanks for your help,
Claus

Hi Fred,
It's nice to know that somebody out there uses the same technology in a similar way.
Our L & F is also JGoodies based (we didn't use JGoodies forms).Yes, nice to know. We also only use L&F and not the JGoodies Layout Manager
(but if JDev 10.1.3 provides that layout manager maybe we use it for new panels).
In our JClient View project, we used very few try/catch blocks, mostly in our custom
Navigation bar class (with freeze row function).
How would you translate the following in 3tiers?
in the client class:
try {
// call a method in the model
catch (JboException je)
this.getPanelBinding().reportException(je);
}We don't use any try/catch-blocks to check for model-exceptions.
In our application a typical bootstrap code snipplet looks like that:
=======================================
//As classmember we have our own ErrorHandler:
protected HTOErrorHandler errorHandler = new HTOErrorHandler(true);
//some bootstrap code
BindingContext ctx = new BindingContext();
ctx.put(DataControlFactory.APP_PARAM_ENV_INFO, new JUEnvInfoProvider());
ctx.setLocaleContext(new DefLocaleContext(null));
//Set Custom Error Handler
ctx.setErrorHandler(errorHandler);
=======================================
Our Custom Error Handler Looks like this:
=======================================
public class HTOErrorHandler extends DCErrorHandlerImpl
boolean inReportException = false;
public HotErrorHandler(boolean setToThrow){
super(setToThrow);
public void reportException(DCBindingContainer bc, Exception ex){
disableAppendCodes(ex);
showPopup(ex);
super.reportException(bc, ex);
private void disableAppendCodes(Exception ex){
JboException jboEx = (JboException) ex;
String baseMsg = jboEx.getBaseMessage();
String detailMsg = jboEx.getDetailMessage();
String errorCode = jboEx.getErrorCode();
Locale defaultLoc = Locale.getDefault();
Object[] detailExceptions = jboEx.getDetails();
if ((detailExceptions != null) && (detailExceptions.length > 0)){
for (int z = 0, numEx = detailExceptions.length; z > numEx; z++){
disableAppendCodes((Exception) detailExceptions[z]);
public void showPopup(Exception ex){
DialogMessage dialog = new DialogMessage((JboException)ex);
dialog.setVisible(true);
=======================================
The DialogMessage is our own ModalDialog to show the ErrorMessages with
a userfriendly dialog (e.g. we show some error/warning/info-icon...)
Each time we throw a exception in a EntityObject the framework ensures that
the Message is shown in our own ModalDialog without using try/catch-blocks
and the this.getPanelBinding().reportException(je)-method;
We wrote our own ModalDialog because of L&F-reasons. But you said that
you use the Standard-Dialog. IMHO you must neverlethess use the setErrorHandler-Method
in 3-tier mode, but you needn't to write your own ErrorHandler, you can use the
JUErrorHandlerDlg....
The following line of code is generated by the ide when creating a default form:
app.getApplicationModule().fetchAttributeProperties(new String[] {"Test2View1"}, new >String[][] {{"Id2", "Name2", "Id3", "AttrTest"}}, null);
I read somewhere that when opening a panel, one should call that method for all used >properties in 3tiers mode only.Sorry, but we don't currently optimize something like that. For what reason
do you want to call that method explicit? We don't have a custom method for that.
I add tests in the validateEntity method and throw a JboException.
I suppose for 3tiers I will have to replace throw new JboException by ???? No. You don't have to replace that. The framework notifies your client via the registered ErrorHandler.
So when a mandatory field is empty, the framework displays an error when a commit
or navigation event is triggered in the nav bar and the user has always access to that
field.We want to override the default framework message with our own message. So we have
to throw the exception manually at some point in the entity object. And for that reason
we implemented a custom validation via MethodValidator, but the framework-validation fires
an exception BEFORE our custom validation is processed. Maybe you don't have that problem
because you use the default error messages. Do you use deferred Exceptions? We do so.
Did you try JClient 3tiers deployments over the Internet?Yes, we tried it via VPN/DSL to validate that our framework interface-usage works both in 2-tier and 3-tier.
After several attempts we were successfull, but the performance was poor.
PS Are you connected to skype? Unfortunately no because of firewall restrictions. We only have access to ICQ.
Regards,
Claus

Games in manual mode help

I put my ipod to manual mode so that I dont' have all the songs on my computer for more space.
I'd like to keep it in manual but I can't put my game back on the ipod, cause it used to be there.
My question is. If I turn back on the auto sync for games will it turn everything to sync and whipe out my songs? Because I've had to re-add everything twice because I didn't have it all in manual. So does anyone know for sure that it won't touch the music?
compaq presario v2000 Windows XP

No, it wil not affect your music's syncing settings.
I've tried this kind of thing myself. For example, setting "Podcasts" to "automatic-update" didn't affect my music settings, which where on manual.
In addition, I've never heard of that happening, and your settings will be safe if nothing weird happens (the computer promptly shuts down, for example..which I've never heard of with your situation either.)
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Can't transfer songs in manual mode

All the instructions say that in manual mode songs can be dragged from the music library and dropped into the iPOD but it won't work. The only way we can transfer is to set the preferences to automatic. Does anyone know how to transfer in manual mode?

Janet,
The songs with the ! next to them means that they have either been moved from the location that iTunes normally looks for them, or that they've been deleted from the computer.
Either way, iTunes cannot find them. If you were to double click on one, you would get a message to this effect and be asked if you want iTunes to look for it.

Can't start iPod in Manual Mode

I can't seem to start an 30GB iPod in Manual Mode, even while pressing the command and option keys while starting up.
Any ideas on how to force it into Manual Mode?

iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.
Try with it it in disk mode.
Putting iPod into disk mode.

Legend in manual mode - Background color

Hi all,
To create legend in manual mode I am using following request URL for a style image.
http://127.0.0.1:8988/mapviewer/omserver?sty=L.ROAD&w=20&h=20&ds=cescdatasource
Here if the color of style is white (For example white color line style) then it won't be visible. Can I set background color?. I need different background color instead of white.
Thanks,
Sujnan

Either set the background color for the MapDecoration or for the table in which you display the legend or both.
e.g. (modification of tutorial 36 Map Legend)
// get the container DIV and set the background color to light blue
var legendDiv = legend.getContainerDiv();
legendDiv.style.backgroundColor = "AliceBlue"; //color name may not work in all browsers
function buildLegend(baseURL)
var html = "<table *bgcolor='gray'* border=0> <tr><td><img src="+baseURL+"/omserver?sty=L.PH&w=45&h=20&ds=mvdemo></td><td> Highways </td></tr>" +
" <tr><td><img src="+baseURL+"/omserver?sty=M.CITY+HALL+3&w=20&h=20&ds=mvdemo></td><td> Cities </td></tr>" +
"</table>";
return html;
}

Fire wire target disk mode work with usb also?

hi all,
does starting up in fire wire target disk mode also work with usb drives?

No, and it requires a Mac with built-in FireWire.

Sx20is--only blue registers in manual mode. Color okay in auto

In manual mode the only color in the image is blue. In auto mode the color is fine.

Check the white balance setting. You are probably set in the tungsten mode, so try a different setting to see if things change. The easiest thing would be to set the camera to Auto White Balance and take a few photos. Use the setting that is the closest to the actual conditions that you are shooting in.
To find the white balance, press the func/set button and scroll through the menus until you are at White Balance.
Steve M.

Can't set to manual mode if it's not listed in iTunes!

Hi,
I'm struggling with this infuriating "feature" where iPods can only be synced with one computer to ensure everything being up-to-date.
I just bought a new computer and want to copy new music to my iPod shuffle (2nd gen).
I don't need auto-syncing, I just want to copy music one-by-one, and I keep getting the Erase and Sync option when I connect the iPod. I've read other threads and it sounds like manual mode is what I need, but once I hit cancel at the Erase and Sync box the iPod doesn't appear in iTunes anywhere for me to change to manual mode! How can I get iTunes to recognize the iPod so I can set it to manual?
The iPod still works fine and I can see the files in My Computer, browse the iPod_Control directory, etc. So I don't think the iPod is broken in any way.
Also I tried editing the preferences in iTunes (I'm on v8 on Windows Vista) to stop auto-syncing with iPods and iPhones (that's an option somewhere in preferences) but it didn't help.
Any ideas!?
Thanks,
Raphi

An iPod shuffle cannot contain music from more than one computer at once; the manual mode referred to is present on other iPod models, but isn't available on the iPod shuffle.
(40957)

How do I set the Shutter Speed in Manual Mode on my EOS 70D

I recently was forced to upgrade to a Canon 70D after my 50D died from a fall. I am not happy with the ease of setting the Shutter speed while in Manual mode. The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen. The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D). I can control the Aperture with the quick control dial. The Function Lock button is off.
I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual. I would greatly appreciate it if someone could help me with this issue.
Thanks
Gene

Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
http://www.dpreview.com/forums/thread/2638326

Form trigger - fire in enter query mode

Hello,
Could someone help me with the following problem, please?
I want to create an key-exeqry and I want it to execute in enter-query mode. Unfortunatly Designer set's the property 'fire in enter query mode' for the trigger to 'No'. I can't find any setting to set it to 'Yes'. Does someone knows a setting or a work-around?
I'm working with designer6/headstart6.
Thanks in advance,
Martine.

Sandra,
I tried to put the key-exeqry in the template. There's only one problem the key-exeqry is a 'in place of' trigger. When I put the code 'Null;' in the trigger, a generated form without a key-exeqry doesn't work because the 'key execute query' does nothing. A generated form with a key-execute query works fine.
At the other hand, when I put the code 'Execute_query' in the trigger, a generated form without a key-exeqry works fine, but the other one doesn't.
Which code should I include in the template-trigger?
Thanks,
Martine.

Start camera in manual mode?

whether you can make the camera to start immediately in manual mode?
Topic edited by Rickard
Solved!
Go to Solution.

It's not possible when using the camera button but if you tap "Camera" in the app drawer or home screen it will go to Manual if that's what you used last time.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Pixel binning/supersampling in manual mode?

EDIT:
This should be a quick, easy reply from a staff member.... why has this not been answered yet?
Does manual mode use pixel binning or is this feature reserved for superior auto ?
Will third party camera apps make use of pixel binning ? (Is it done at driver level or software level?)
Original post
Hi, so we have a 20mp sensor here, and clearly the "superior auto" is using some sort of pixel binning to produce its 8mp images. Is this true when selecting image sizes smaller than 20mp in manual mode? e.g do both the 16:9 and 4:3 8mp modes use the binning or it this exclusive to the "superior auto" mode
And on a related note, is there a good reason why the superior auto drives the ISO so high compared to the manual mode at auto settings? It seems that any indoor or night photography in superior mode is an absolute disaster! Blurry, grainy mess most of the time; no such issues in manual where dimmer conditions are less of an issue.
On a related note, any chance of Sony changing the behavior of the camera launch button, and lock screen shortcut? This always launches the horrible superior mode, whereas the app shortcut has the prefered behaviour of booting into the last used mode. I was hoping not to have to root my phone to fix software issues as I have with almost every other phone I've owned, but this issue will be a deal breaker for me.

I mostly use manual mode in 8MP 16:9. Would be nice if it could be set default as it seems to produce lower noise images compared to other 8MP smartphones I've had so far. With non moving objects and steady hand you can get even better results dialing low ISO and HDR mode. Other times the auto ISO seems to work better to trade off noise for shake free image.
Great addition is I can also use a bit zoom (there is an indicator in the zoome slider which shows where you start to lose detail) in this mode which is great.
I never really used the superior mode since I feel it compromises too much and like to play with the settings a bit depending on situation.

430exII fires twice in Manual mode on radio triggers??????? I need it to stop!

Similar Messages

Maybe you are looking for