431445-001 and 431446-001

Is there other difference between 431445-001 and 431446-001 aside from wattage? Thank you!
This question was solved.
View Solution.

No, I can only find wattage difference here.
Regards,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

13.3-in, LED, HD displays 581177-001 and 580664-001 - what is the difference?

Hello,
I have just upgraded my HP pavilion 1020er from lowest CPU (AMD Athlon™ Neo Processor MV-40 (1.6-GHz, 512K L2 cache), UMA, 581171-001) to the highes one (Intel Core2Duo Processor (2.26-GHz, 1066-MHz FSB, 6MB L2 cache), discrete 580663-001).
The LED connector fit perfectly but thescreen shows nothing.
The fan is on, the power button switches it on and off but neither single action on the screen no sound. I tried to connect the external LCD - no result, though I'm not completely sure I managed to switch to VGA output.
So my questions are:
1. what is the difference in part numbers 581177-001 and 580664-001? Specifically what does MA stand for in "13.3-in, LED, HD BrightView (1366x768) MA (AMD systems)"?
2. Do I need to reinstall Windows since I upgraded from AMD to Intel?
3. Any ideas on possible reason are very much welcome.
Thank you.

Hi @PadliQ ,
Thank you for your post, I will do my best to help!
I see you upgraded the CPU on your notebook from AMD to an Intel.
Here is the HP Pavilion dv5 Entertainment PC Maintenance and Service Guide. I did not notice the part numbers you listed, but the processor is a supported one ( Chapter 3 page 20).
I would try this. Go to the bios screen and restore the defaults. This will cause it to scan and pickup any hardware changes you have made.
If you boot into safe mode does the display work?
I believe the MA in the description of the display stand for Matte finish as opposed to a bright finish. ( The bright finish has a more reflective quality and can make displays hard to read in brightly lit conditions.
If you still have an issue I suggest contacting HP support for assistance.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

ICR - Process 001 and Process 003 - Setting Ledgers

Hello,
I must create the ledgers (I1 and I3) for ICR Process 001 and 003, but I don't know as setting them.
Can you help me?
Thank you so much.
Best regards
Giampaolo

Hello Giampaolo,
BCF is not relevant for ICR in my opinion. Why do you need this?
Best regards,
Ralph

Client 000, 001 and 066

Hi everyone,
Pretty new to SAP.
I am struggling to find answers to the following questions:
How do you use client 000, 001 and 066?
Apart from initial installation and support (066) can theses clients be used in development, testing and production environements?
Can 000 and 001 be used as working clients or should they only be used as template?
What should their configurations be when using SCC4 for each system inthe landscape: DEV, QA and PROD (and Solution Manager)
From a security point of view, once SAP*, DDIC have been secured should they be any other users (Dialog, System) in these clients?
Sorry quite a few questions but if anyone could give me direction as I am trying to understand if some of our current settings are correct and if not why.
Thank you

Hi Corinne,
Even though it is a very basic question, it is very essential to understand and find an answer to your questions.
Client 000, 001 and 066 are (as you know) standard clients thats pre-built when you install SAP.
"Apart from initial installation and support (066) can theses clients be used in development, testing and production environements?"
Answer: No, they cannot be used for development, testing or production environments. When I say, "they cannot", I mean they are not supposed to be used.
"Can 000 and 001 be used as working clients or should they only be used as template?"
Answer: Client 000 is basically used as working client only when you do support pack upgrade or ABAP load generations (SGEN) and implementing additional languages, etc. Otherwise, client 000 should not be used as a working client. The same applies to client 001. But the only exception with 001 is, with Solution Manager, 001 will be your working client. You will do all configurations and obtain support from SAP through this client. With other Systems like BW and CRM, this client (001) will not be a working client.
"What should their configurations be when using SCC4 for each system inthe landscape: DEV, QA and PROD (and Solution Manager)"
Answer: In the production system - "Changes and Transports for Client-Specific Objects" should be set to "No Changes allowed". "Cross Client Object Changes" should be set to "Changes to Repository and Cross-Client Customizing Allowed". "Protection: Client copier and comparison Tool" must be set to "Protection Level 1: No Overwriting". Same applies to Quality System and Development System. These are by-the-by default settings also when you install the system.
"From a security point of view, once SAP*, DDIC have been secured should they be any other users (Dialog, System) in these clients?"
Answer: Once you install the system, you must first make a copy of DDIC to any user you create in your name or any standard name. Never use DDIC when you do initial settings after the installation.
The following link might be of some help to you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/c8189452c511d182c50000e829fbfe/frameset.htm
Hope this helps.
Thank you.

Characteristics for class type 001 and class 59111 - Message Re-phrased

Hi All,
Let me put in better words.
The requirement is to get the list of Characteristics that are associated with a particular Class type and Class that would be entered by the user in selection screen. I have used KLAH and KSML to establish the link and got the relevant characteristics list configured. It worked for me for most of the Class type and Class combination.
The issue is on particular class type 001 and class 59111, if I put a lookup in KSML, I don't get any records. But if we look in the configuration CL02 for the same Class type 001 and class 59111, I see a list of characteristics configured there.
Does anyone know how to fetch the characteristics on this particular case?
Thanks
Rajesh.
Edited by: Rajesh Kumar K on Jan 12, 2012 12:12 PM

Hi Sylendra,
Thanks for looking into it and replying with your thoughts.
What you have mentioned about the approach on getting the characteristcs from KLAH and KSML is exactly how I have written in my program. Ofcourse your second statement of going into AUSP to get the values for characteristics for an Object (eg: material number XXXX) is also correct.
But my issue is still on getting the relevant characteristics for the class tyoe 001 and class 59111. I need to display to user the relevant characteristics that are configured for Class type 001 and class 59111. But when I go into KSML passing the internal class number and class type, I don't get any records. If you see, I am not searching characteristic values for an object, I am searching for characteristics itself.
The question would be, why records are not maintained in KSML for class 59111 (though they show in CL03) . or there are any other tables to read characteristics...
Thanks
Rajesh.

Exams 1Z0-001 and 1Z0-007

I wonder, can you be an Oracle 9i certified database associate if you have a combination of 1Z0-001 (oracle 8i Pl/SQL) and 1Z0-031? (9iDatabase fundamentals 1)

dat doesnt make any difference,actually 1z0-007 is purely sql and 1z0-001 is sql+pl\sql;whereas 1z0-147 is purely pl\sql.
so my suggestion is go for 007+147

Understanding of Valuation Basis /001 and /002

What is Valuation Base 001/ and 002/. I can see 82.26 what is 82.26 How it is getting calculated Experts throw some light on this

Valuation basis for an wage type can be determined from PC - 01 - with specifications (0 to 9).
Its is calculation of amount paid per hour.You can divide gross salary with monthly working hours
you will get the value as per your screen shot.
In the screen shot per hour is 82.26 * 10 hrs = 822.60.
If PC 01 with specification is 3 then both will generate same value.
you can use specifications 1 , 2 etc based on requirement.
/002 case: For some employees per hour amount shd not be on gross may be only on 3 wages out of 4 from IT0008 then you can change the PC of that WT with /002.
Hope it helps.

I just downloaded Java for OS X 2014-001 and my Epson Workforce 630 printer is not recognized? Any thoughts?

I just downloaded Java for OS X 2014-001 and my printer is not recognized. I use an Epson Workforce 630. Has anyone had similar problems?

Hi there wildwatercolors,
I would recommend taking a look at the printer troubleshooting steps found in the article below.
Troubleshooting printer issues in OS X
-Griff W.

1z0-001 and 1z0-007 ????

hi everybody, after analysing about the exams 1z0-001 and 1z0-007 a lot, i have decided to go on with 1z0-001(intro to oracle pl/sql). but now i find in many of the forums that people are not preferring 1z0-001. i did not know why is that so?? strangely some of them also told that 1z0-001 is no more. i am in total confusion.
why do people prefer 1z0-007??? please guide me....
also i have planned to do OCA, for which i will do 1z0-001 and 1z0-052. am i correct??

why do people prefer 1z0-007?I can't suggest about that
which i will do 1z0-001 and 1z0-052. am i correct??YES!
anyway you can check onhttp://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=198&p_org_id=&lang=

Difference between cooling fan part no. 650847-001 and part no. 665277-001?

Replacing fan in pavilion dv6-6117dx... - the fan has become very noisy. I see that HP is no longer selling fan part no. 650847-001, but I've located that part (new). HP is now selling fan part no. 665277-001. What is difference between cooling fan part no. 650847-001 and part no. 665277-001?

Replacing fan in pavilion dv6-6117dx... - the fan has become very noisy. I see that HP is no longer selling fan part no. 650847-001, but I've located that part (new). HP is now selling fan part no. 665277-001. What is difference between cooling fan part no. 650847-001 and part no. 665277-001?

Logic Gold 5.5.1 and Digi 001

After formatting my computer, logic and digi 001 wont communicate in OSX anymore. I have installed both OS 9 and OSX, and in OS 9 it work fine. But when i try to launch Logic (5.5.1) in OSX i get this error message: Error code 28519 was returned buy the core audio driver...
The Core audiodriver is installed in Library/audio/plugins/HAL! But i have no clue about SystemInit and Direct I/O (versions or were to put the files on the computer.
I have also tried with and without the Protools software installed but that did´nt work either.
PLEASE someone, help me. I have tried and tried but nothing seems to work. Before the formatting everything worked fine, but not anymore...
What´s wrong?

Hi,
Why exactly did you format your computer?
Did Logic Gold 5.5.1 work on you OSX BEFORE you reformatted?
What changed from before your format to after (any driver versions changed/automatic updates?)
Remember,Digidesign does NOT support Digi001 anymore,so which Audio driver(DAE/CoreAudio) did you use before you reformatted?
From Digidesign's website Answerbase:
Core Audio error 28519 when trying to use the Digidesign Core Audio driver in a third party application (Logic, Reason, etc.).
This error can have several different causes. Some things to check:
1. Is another application using the core audio driver, such as the Sound control panel in your System Preferences panel? If so, you'll need to quit that application or switch your Sound control panel back to built in hardware. Keep in mind the Digidesign core audio driver is single client - only one application can be using the hardware at any time.
2. Is your Digidesign hardware turned on and powered up? You may try turning off and turning back on the hardware and restarting your application.
Also see Answerbase #27816 for other possibilities specific to Emagic Logic:
Getting an error message -28519 in Logic Audio 6.3. when changing to Digidesign hardware for the CoreAudio output.
These errors can be caused by two plugins that are installed when updating Emagic's Logic to version 6.3.1
Removing these two plugins from the plugins folder may solve the issue.
The plugins folder is located in the
MacHD / Library / ApplicationSupport / Digidesign / Plugins
Remove
- ESB TDM OSX
- ESX 24 TDM OSX
If these plug-ins are installed, when launching Pro Tools, you will get an error message: When attempting to launch you get either: "- 6003 Emagic system bridge error"
or "- 6003 error while initializing TDM host streams." (see Abase # 27414). Remove the plug-ins above to solve this problem.
Without knowing why you reformatted,it is harder to help.
I hope the Digidesign Answerbase messages help you out.
Cheers,
Nick
iBook G4 800mHz Mac OS X (10.4.3) 640MB RAM/ProTools 6.9/LogicPro7.1.1

Digi 001 and dual g4 1ghz

I'm trying to change my system over from a quicksilver 733mhz to a dual 1ghz machine. While running pro tools on the dual machine I keep getting a dae error -6045 anyone have any knowledge about this? I'm running pro tools 6.4 as I don't know if 6.9 will work with digi 001
thanx

Well, you would probably have more luck going on the Digidesign forum...
My experiences with DAE errors and Protools usually have to do with the installation. Did you install Protools LE 6.4 as a clean copy or did you copy it from another computer? Also, installing a clean copy of Protools off of the disk installs drivers for the Digi or Mbox to function...if you didn't go through the full installation process then your Digi won't work. You can't just plug it in...Protools LE requires that you have a Digidesign Protools Interface (Such as an Mbox or Digi) +in order to even run Protools+. If the Digi 001 isn't correctly installed, that would probably explain your error messages.
Also what OS are you running? And I am pretty sure 6.9 will work with the digi 001, since I know Protools 7 supports all Digi and Mbox interfaces. I've got protools 7 so I can't give you specific information just off the top of my head... If you have a copy of 6.9 then try installing it and see if it works. After the installation the Digi 001 and Protools should be fully operational.
After reading your post again, are you trying to copy all of your info off of your original HD on the 733 over to the dual 1 Ghz machine? If that's the case then that would explain the problem...you must install a clean version of Protools LE in order to install the drivers for the Digi 001. Without the Digi, protools won't run.

CN41, CNS41 don't work on planning version 001 and project version

Iu2019ve an issue:
Iu2019m working on release ECC 6.0.
I did the overall planning, costs and revenues (structure planning on Project), then I saved data on project version and on planning version 001.
When I run the CN41 or CNS41 with plan data in plan version 001 (costs and revenues) and plan data (costs and revenues) in project version, the report doesnu2019t let me see the plan data in the Project version column neither in the planned cost/rev. 001 column.
The hot patches on my system is on SAPKH60013.
Any one could help me?
Pierluigi.

FYI for others searching on this issue, there are a few OSS Notes that explain this:
Note 148971 - Planned values in Project Information System
"4. The Planned costs column in the structure overview and the planning board corresponds to the Overall planned costs column in the hierarchy reports if you implemented Note 106823..
If you implemented Note 106823 (included in the standard system as of Release 4.0B), only the annual values of the WBS elements, networks and orders are displayed. Column 'Planned costs' in the structure overview and planning board corresponds to the 'Total of year'. If this effect is not desired, Note 106823 has to be removed or should not have been implemented beforehand. In addition, if you implement Note 127521, you must remove the changes in object REPS LHFPLU08 of Note 127521 (this applies to Release 30D - 31I). Any other changes can remain."

Audio Update 2007-001 and mac Mini - boot hangs up

I downloaded the Audio Update 2007-001 this afternoon, and I've had problems with my mac Mini ever since. I thought it took a long time to boot from the gray Apple screen, longer than would seem to be warranted with a 1 MB update. Then I got the blue screen and another spinning wheel. I did hear the audio port turn on, but I never got past the spinning wheel (not a pinwheel), so I powered down. That was a mistake.
Fortunately, I could start up in safe mode. When I did, I saw that there was no audio device recognized at all. I restarted in normal mode and got the same problem as before: blue screen, spinning wheel. I'm going to let it sit there, but for how long?
Any advice?
mac Mini Mac OS X (10.4.10)

I solved my own problem. After restarting in Safe Mode again, I downloaded the standalone version of the audio update, installed that, and restarted. No problems booting up.

Probem with AirPort Extreme Update 2007-001 and InternetConnect

Hello,
I have just installed AirPort Extreme Update 2007-001 through SoftwareUpdate. SoftwareUpdate reported a successful installation and invited me to restart.
On restart, the machine does connect correctly to my wireless network, but InternetConnect does not give any information or allow any control, reporting Network Not Avaiable, Signal Strength 0, and Status not available. InternetConnect also does not allow me to turn Airport off.
Everything was fine before the update.
Looking in /var/log/install.log, I see that the process was fine through Install, but in Optimize there are a couple of update_prebinding errors. [relevant bit of log fie attached below].
Does anyone have any comments or fixes?
Steve
[extract from install.log]
Jan 27 02:25:05 jgrieve Software Update[763]: Jan 27 02:25:05 jgrieve Software Update[763]: Summary Information
Jan 27 02:25:05 jgrieve Software Update[763]: Type Elapsed time (sec)
Jan 27 02:25:05 jgrieve Software Update[763]: patch 0.016762
Jan 27 02:25:05 jgrieve Software Update[763]: zero 0.011898
Jan 27 02:25:05 jgrieve Software Update[763]: script 0.323745
Jan 27 02:25:05 jgrieve Software Update[763]: extract 4.738219
Jan 27 02:25:05 jgrieve Software Update[763]: config 1.972343
Jan 27 02:25:05 jgrieve Software Update[763]: receipt 4.454015
Jan 27 02:25:05 jgrieve Software Update[763]: disk 1.156753
Jan 27 02:25:05 jgrieve Software Update[763]: install 11.308491
Jan 27 02:25:05 jgrieve Software Update[763]: Jan 27 02:25:05 jgrieve Software Update[763]: Starting installation:
Jan 27 02:25:05 jgrieve Software Update[763]: Finalizing installation.
Jan 27 02:25:05 jgrieve Software Update[763]: Registering applications
Jan 27 02:25:05 jgrieve Software Update[763]: Registered /Applications/Internet Connect.app.
Jan 27 02:25:06 jgrieve Software Update[763]: Optimizing system performance
Jan 27 02:25:36 jgrieve : update_prebinding[965]: update_prebinding: error: image file changed since it was loaded
Jan 27 02:25:36 jgrieve : update_prebinding[965]: update_prebinding: error 256 running updateprebindingcore
Jan 27 02:25:40 jgrieve Software Update[763]: Private/Total = (25.8MB, 47.9MB), Heap/Total = (9.9MB, 19.1MB), Regions(malloc, private) = (151, 48)
Jan 27 02:25:40 jgrieve Software Update[763]: It took 35.230876 seconds to successfully End of Install Jobs
Jan 27 02:25:40 jgrieve Software Update[763]: It took 0.983608 seconds to <IFAppRegisterElement: 0x16851e70>
Jan 27 02:25:40 jgrieve Software Update[763]: It took 34.244586 seconds to <IFPrebindElement: 0x16cb2bb0>
Jan 27 02:25:40 jgrieve Software Update[763]: Jan 27 02:25:40 jgrieve Software Update[763]: Summary Information
Jan 27 02:25:40 jgrieve Software Update[763]: Type Elapsed time (sec)
Jan 27 02:25:40 jgrieve Software Update[763]: Prebind 34.244586
Jan 27 02:25:40 jgrieve Software Update[763]: AppRegister 0.983608
Jan 27 02:25:40 jgrieve Software Update[763]: zero 0.002682
MacBook Pro Mac OS X (10.4.8)

Sorry, a bit of a case of 'post first think later' - reinstalling the update from the .dmg downloaded from the apple web site fixed the problem - no errors on the Optimizing step second time around.
But I think that SoftwareUpdate should not have reported success first time around, when there were errors reported in install.log
Steve
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

431445-001 and 431446-001

Similar Messages

Maybe you are looking for