43N3412 (Hard Drive Adapter III) vs 43R1980 (Hard Drive Adapter II)

Hi,
I can buy 2nd version of hard drive adapter. It's specifications are not avaible on Lenovo website. What are the differences between II and III version? I want to use it on T400 with SSD.

What do you have mounted in the ThinkPad 12.7mm Serial ATA Hard Drive Bay Adapter III  and how is the drive secured?
I found that the unit requires the HDD drive tray + the rubber rails for an HDD or SSD to be mounted properly. The Newmodeus UltraBay caddy has none of those requirements. The older 9.5mm UltraBay caddy only required the drive tray with the screws attached to the drive to keep things secure.
Thanks for the response.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Similar Messages

  • On my Macbook pro 15 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    That is correct. The tech specs indicate:
    Hard Drive Interface
    6.0 Gbps Serial ATA (SATA)
    Optical Drive Interface
    3.0 or 6.0 Gbps Serial ATA (SATA)

  • I have a late 2011 mac book pro and I'm wondering if it uses SATA II or SATA III for the hard drive? Which eventually I'm going to replace with a SSD.

    I was wondering if the late 2011 macbook pro uses SATA II or SATA III for the hard drive. The reseason I'm asking this is because some day I'm going to replace the Hard drive for a SSD drive down the road and would like to use all the performance of the SATA controler.

    SATA III.

  • T510/520 Drive Bay Adapter III and SSD compatibility

    Hi,
    I would like to use a Drive Bay Adapter III with some SSD as second drive on my T510 and T520 (I would switch it between those two laptops, use it to transfer data and so on). Are there any compatibility issues out there? Should I avoid certain SSD controllers or is it perfectly the same if I go for Sandforce or Marvell or any other?
    Thank you.
    Solved!
    Go to Solution.

    Hello flashheart:
    The Drive Bay Adapter III or Ultrabay adaptor (#0A65623) would replace the optical drive, which you probably are already aware of. There should not be any compatibility issues with either of those controllers but I have read many instances in the forum that the Sandforce controller is probably the fastest.
    Some more information on the adapter:
    ThinkPad 12.7mm Serial ATA Hard Drive Bay Adapter III
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

  • Backing up images on external hard drive and restoring to new internal driv

    I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!

    The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
    If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
    RB

  • I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
    Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
    It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
    http://pondini.org/TM/18.html
    Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
    Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
    My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason.  At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups.  At that point, you can erase the USB drive and use it for another purpose.

  • I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on external drive.  I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive.  Is this going be a problem?

    I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on an external drive.  Both drives are backed up on Time Machine.  I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac.  This would save having to transfer several hundred GBs of data.  Will this work using Set Up Assistant?

    Your user account on the new Mac must have a different UID than on the old one.  See the pink box in Problems after using Migration Assistant for an explanation.
    You'll need to change the permissions on the iPhoto library on the external HD.  Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password. 
    Then click the plus sign, select the user account you want on the next screen, and click Select.   Then change Read only to Read & Write for that user via the little arrows.  Finally, click the "gear" icon and select Apply to enclosed items.  That may take a few mintutes on a large library.

  • I downloaded some videos to Premier Elements 13 from external hard drive but now the external hard drive is damaged. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open

    I downloaded some videos to Premier Elements 13 from an external hard drive but now the external hard drive is damaged. While setting up my new MAC the external hard drive was dropped and I have been told by an outside source they could not retrieve the files.  It had 4 years of photos and videos on it. I remembered that I had downloaded some of the videos from the external hard drive (before it was broke) to Adobe Organizer 13 when I installed the Adobe 13 on my MACOS X 10.9.5.  I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open these videos?
    Any input is greatly appreciated!! I am sick over losing the videos and had a little hope on Adobe Organizer until I was unable to open them.  I am thinking it is due to my external hard drive not being plugged in. I thought when I transferred from the external hard drive to Adobe 13 that it would be there without the external hard drive needing to be attached but maybe I did something wrong.
    Thanks again for any help!!!!

    jnrmendonca
    It had 4 years of photos and videos on it.
    To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
    Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
    ATR

  • How do I copy an iPhoto library, which is on an external hard drive, onto a new external hard drive?

    I'm running out of space on my external hard drive, so I was advised to buy one with triple the amount of space.  So, I need to copy my current iphoto library, which is on an external hard drive, onto a new external hard drive.  I thought I could just drag and drop it in, but that doesn't seem to be working. 

    Make sure the external drive is formatted MacOS Extended (Journaled) and then drag the iPhoto Library to that drive using the Finder.
    Then double click the library in its new location to open it in iPhoto. Test it thoroughly, if it is working, before deleting the original library on the internal drive.
    To check the format of the drive, see (it says Aperture, but the same applies to iPhoto):  Format external drives to Mac OS Extended before using with Aperture
    iPhoto: Issues with FAT32-formatted drives

  • HT201250 I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
    http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

  • I have two drives in my macbook pro. How can I download my apps to my second data hard drive instead of my OS SSD drive?

    I have two drives in my macbook pro. How can I download my apps to my second data hard drive instead of my OS SSD drive? Is there a way to point the default directory in the app store to a different hard drive? Certainly for a Mac Pro this makes sense.

    Hi,
    See if there is anything in this Link that applies:
    http://support.apple.com/kb/HT4337
    Cheers,  

  • I move folders from my internal hard drive twice to an external hard drive.  Now I believe Lr does not know how to find my photos.  What can I do to get this cleared up.

    I move folders from my internal hard drive twice to an external hard drive.  Now I believe Lr does not know how to find my photos.  What can I do to get this cleared up. 

    Jim has a very good suggestion. There are many factors at work here:
    1) How are you connecting the external drive to the computer?
    2) How big are files (329 x 1MB is not the same as 329 x 25MB)?
    3) What is your computer specification?
    4) Do you have any power saving settings on (in particular something that would send the computer/hard drives to sleep)?

  • ICore 5 with flash drive vs iCore 7 with hard disk

    Hi,
    I've been with PC since the days of DOS in the 80's. I've finally made a switch to Mac after my son has used MacPro for 4 years now and about to upgrade.
    I just bought a 27inch iMac with iCore 7 with traditional hard disk. After reading about flash drive/SSD, I am thinking maybe I've made a mistake not going for a flash drive option. I have about a week left to be able to return the unit to Apple. So my question is whould I be enjoying more by going to iCore 5 with a flash drive for about the same price as my current setup? My main use is to do small business bookkeeping, internet use, kepping music and family pictures. I don't play computer games (maybe a chess or solitare once in a while)
    Thank you for your input.
    Daniel Takayama
    A fresh new Mac user

    I vastly disagree. An SSD will make every single use there see improvement over the i7. The i7 may be fast but you won't do anything that would really tax the CPU, you'd be much better served by the SSD. It will make your browser load faster, yout pictures load faster, any databased that you bookkeep load faster, and most importantly it will cut your 'sluggish Mac syndrome' situation where after just loading up from sleep/reboot etc, your Mac needs a minute to 'warm up' else things run very slowly.

  • Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

    I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
    Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • HT1751 My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used).  ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

    My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used).  ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help!  The backup files consist of 34,000+ songs; almost all burned from my own CD collection.  I do have most of the songs on an ipod classic but hesitate to try to restore from that.  Can someone tell me how to get these 34,000 songs to show up in iTunes?  Thanks!!

    This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
    The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
    tt2

Maybe you are looking for

  • "The volume for DSC_0001.jpg cannot be found"?

    I'm a bit of a novice with macs but a new problem has occurred while importing photos from my Nikon D70s to iphoto. With the majority of images, it comes up with the caution "The volume for DSC_0001.jpg cannot be found" or whichever DSC image. If I p

  • What to do if error 266 pops up whilst trying to view Audio CDs in iTunes

    I had this error almost a year now, and now I found some solution: Step 1: Disable any virtual drive mounting software e.g. Daemon Tools (in Daemon Tools: set the number of emulated drives to 0). Step 2: If iTunes does still not recognize your CD, re

  • How to sync photo albums in between iPhone and ipad on upgrading to ios8?

    hi, i upgraded to ios 8 on my iPhone and iPad which both have a common Apple ID. after up gradation only camera roll got synced from iPhone to iPad.Photo albums which were earlier present in iPad got deleted. how do I get them back or is there a way

  • Open new tag window now blank - used to have links to web pages

    On previous version when I opened a new tag the web page which opened had the icons of my most popular web pages visited. How do I get back to this feature? All I get now is a blank web page.

  • urgent database PreparedStatement problem

    i have tried the following codes for many many times but it still cant work does anyone know why? please help, thank you. codes segment: PreparedStatement update = connection.prepareStatement( "UPDATE OutgoingQueue SET statusEmulator = ? and dateOut