4400 AP license migration to 5500 - is it possible ?

Hi all,
Can someone please tell if it's possible to use existing AP license number from an old 4404 WLC to a new WLC 5508 ?
I know that the 4404 has hard licensed bounded to the controller, not like the 5508 adder licenses that can be purchased separate, but I cannot find information about this type of migration (from 4404 to 5508).
Thank you.

No, you can't move a license from a 440x to another platform. When you purchase the 5508, you'll need to make sure you purchase the appropriate license size
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Similar Messages

How old licenses migration during basic and advanced cisco ise?

Hello,
How old licenses migration during basic and advanced cisco ise?
Regards,
Alvaro

Hi,
What do you mean by migration? you are migrating to another hardware? or you are upgrading from basic to advanced license?
here is the install/upgrade process:
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_man_license.html#wp1059946
If you are migrating from one device to another I think you need to use this link:
https://tools.cisco.com/SWIFT/LicensingUI/Home
HTH
Amjad

VCS HW to VM license migration

We recently purchased 4 x LIC-VVCS-E-M-PAK and 4 x LIC-VVCS-C-M-PAK so we could migrate all our call licensing from VCS HW appliances to VMs, however when I go to redeem one of the PAKs I got for the VCS-C, it's only showing the following as available:
LIC-VVCS-C-M-PAK
1
LIC-VCSE-100
1
LIC-VCS-GW
1
Shouldn't it allow me to enter the serial number of a HW applicance to migrate from, then give me the relevant call licenses also? Has anyone else had experience migrating HW licenses to VM who could maybe shed some light on this?

Hello Nick -
Please reference the below discussion, you'll need to email a certain group with Cisco to process the request to rehost the appliance option keys to the VM. I'm sad to say that there isn't any automatic process in the background that does this when one purchases a migration for any product, it's all manual, and done by the customer most of the time.
vcsvcse-license-migration-hardware-vm

License Migration for Unified Communications.

Hi guys. I need assistance for migrate the existing licenses for Cisco Unified Communications Manager, Cisco Unity Connection and Cisco Unified Contact Center Express devices to be valid in the new version installed.
The existing versions are:
   * Cisco Unified Communications Manager 5.0
   * Cisco Unity 4.0
   * Cisco Unified Contact Center Express 4.5
The new versions are:
   * Cisco Unified Communications Manager 8.6
   * Cisco Unity Connection 8.6
   * Cisco Unified Contact Center Express 8.5
I tried to use the licensing tools such as "Cisco Licensing" ([email protected]) and "Product License Registration" (https://tools.cisco.com/SWIFT/LicensingUI/lookupLicenseRehost) but I have not obtained satisfactory results.
The Product License Registration requieres the following information but I don't know this:
UDI Product ID:
UDI Serial Number:
Device Credential:
Someone knows what is the best way to migrate licenses for UC applications?
I appreciate any cooperation in this case.
Thanks a lot.
Ernesto Gonzalez

Hi Ernesto,
For UCCX 4.5 to 8.5, as there is no direct path available for upgrade , you need to use an intermediate version 7.0 to restaore the 4.5 data. From UCCX 7.0 with latest SR you have to perfrom one more upgrade to reach the version 8.5.
You can use the ordering guides to get to know about the license migration.
http://www.cisco.com/en/US/partner/products/sw/custcosw/ps1846/prod_how_to_order.html
http://www.cisco.com/en/US/services/ps2961/ps2664/services_overview_uc_ordering_guide.pdf
Hope it helps.
Anand
Please rate helpful posts !!

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible? Thanks

Yes. Yes. Yes.
Mylenium

CS6 I have a Student and Teacher Edition (incl. 3 license) for Windos. Is it possible to use one of these licenses for mac?

CS6 I have a Student and Teacher Edition (incl. 3 license) for Windos. Is it possible to use one of these licenses for mac?

jasontc:
The answer is yes. If you use the "alias" method (in iPhoto's Advanced Preference pane - don't copy files when importing) you can use your own source folder system. You can also share the source files with another image management application. There are some unique issues, however. Any edit of a photo by iPhoto is not seen by the other application as the edited version is saved in iPhoto's Modified folder. If the other application can perform edits on the source file and save the edits to the actual source file, iPhoto's thumbnail of that file will not reflect the change but the edit will display when you open the photo in iPhoto's edit window or use that photo in a book or slideshow. If iPhoto hasn't edited before hand. If iPhoto edits the other application's edited version the source file is not touched. Also any file added to an existing source folder has to be manually imported into iView and then moved within iPhoto from its roll to the roll representing the source folder it was placed in via the Finder. When moved in iPhoto the source file will physically be moved to that folder in the Finder. Hope I haven't confused you with this convoluted description.
So with some quirks you can use another application like iView MediaPro on the same set of source files.
I do the above with iPhoto and iView.

Prime LMS 4.2 to Prime Infrastructure 2.0 license migration

A couple of months ago I upgraded WCS to Prime Infrastructure (WCS via NCS to PI 1.2 at that time). Meanwhile PI is running version 2.0. For some reason, when purchasing the upgrade licenses, I also got a 500 device LMS4.2 upgrade license.
The exact part numbers were:
R-W-PI12-M-K9 WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration
R-PI12-BASE-K9 Prime Infrastructure 1.2 Base License and Software
L-PI12-LF-500-LIC Prime Infrastructure 1.2 - Lifecycle - 500 Device Lic PAK
L-PILMS42-500-M Prime Infrastructure LMS 4.2 - 500 Device Upgrade Lic
I have a virtual LMS appliance running where I installed the 500 device license I mentioned. I've actually never used LMS but that's a different story...
As I'm running low on PI device licenses (lifecycle licenses to be precise), the question is:
Is there an officially supported scenario to migrate these 500 LMS 4.2 licenses (that are already the result of a license upgrade) to PI 2.0?
If so: what part numbers do I need to purchase? I suppose I need
R-L-PI2X-U-K9 LMS to Cisco Prime Infrastructure 2.x Upgrade
plus
(L-L-PI2X-500-U LMS to Cisco Prime Infrastructure 2.x Lifecycle Upgrade 500 Device)
XOR
(L-L-PI2X-500-UP LMS to Cisco Prime Infrastructure 2.x Lifecycle Upgrade with PASS 500 Device)
Maybe someone can comment on that... thanks in advance.

In case anyone is facing the same issue:
Meanwhile, I finished the upgrade process using the following part numbers:

VCS\VCSE license migration from hardware to VM.

Hi all,
I want to migrate my VCS\VCSE from hardware to virtual.
Both servers are covered by active maintenance contract.
How does licensing work in this case? What is the transfer procedure?
Any cost involved?
Thank you.

Hi,
Regarding Cisco VCS, in order to migrate from hardware to virtual machine, you will need to purchase a new license to make the transfer. These are the partnumbers you need:
R-VMVCS-C-M-K9
For HW Migration to E-Delivery Virtual VCS Control Only
R-VMVCS-E-M-K9
For HW Migration to E-Delivery Virtual VCS Expressway Only
Please, contact your Cisco representative to get further information.
After you purchase the license, the license rehost from appliance to VM will be made by a specific Cisco team, not the Global License Operation team, this is a different rehost process. You will have to send your request to [email protected], this team will provide all the instruction to rehost your VCS license properly.
I hope this help.
Regards
Paulo Souza
Please rate replies and mark question as "answered" if applicable.

CUCM license migration

Hi,
One of our customer wants to migrate their 300 essential license to CUWL standard license. But I can't find any option for that. Can anybody advice me how to do it?
Thanks
Asif

If you are a partner, I would work with Partner Plus to get this ironed out. They will even give you the BoM.

BE5000 to BE6000 License Migration

We currently have Business Edition 5000 Version 9.1 installed with 125 CUWL Standard licenses. We do not currently have UCSS or ESW. We are looking to upgrade to BE 6000 Version 10.5. Our supplier has told us that we need to purchase the BE6000 appliance 25 CUWL bundle and purchase 100 new CUWL licenses in addition to a new SWSS(UCSS+ESW) contract. We were originally looking to purchase the ESW contract but this has now been replaced by SWSS. I had originally been told that the CUWL licenses were transferable between Unified Communication applications using a zero cost migration option and that we would not need to purchase new licensing. I understand that this may only be available with active UCSS.
My question is would I be able to purchase SWSS on our existing BE 5000 v9.1 and then obtain a zero cost migration to BE 6000 9.1 and then utilise the SWSS contract to upgrade to 10.5.
Having to purchase new CUWL licensing is increasing the cost by a substantial amount.
Thanks
Colin

If you're a partner, you want to reach pre-sales for current promotions, or your SE.

License migration from Flex Builder 3 to Flex Builder 4

I am ready to purchase a license for Flex Builder but am hesitant to do so. It appears that Flex Builder 3 is available now with Flex Builder 4 coming within some time period. If I buy a Flex Builder 3 license now will I be entitled to Flex Builder 4? If not, should I wait for FB 4 to become available? What is the anticipated ship date of that product?
Neil

From our FAQ
Q: If I purchase Flex Builder 3, am I eligible for an upgrade to Flash Builder 4?
A: Adobe has not yet announced the ship date of Flash Builder 4. To be eligible for a free of charge upgrade to Flash Builder 4, you will need to purchase maintenance along with your purchase of Flex Builder. You can purchase maintenance with your Flex Builder 3 Standard purchase for an additional $99 US which makes you eligible for a free-of-charge copy of Flash Builder 4 Standard edition when it ships. You can purchase maintenance with your Flex Builder 3 Pro purchase for an additional $299 US. To purchase maintenance, you will need to buy through an Adobe reseller. In the US, please contact CDW at 800-800-4239.

WCS license migration

Hi all,
I have a situation at a customer place. They have 2 WCS servers with plus licenses, AP capacity 400 and 300 resp.
They have a plan to consolidate the two locations into one and use single WCS server for management. Is it possible to use the license from the WCS server with 300 AP capacity onto the WCS server with 400 AP capacity?
Any help is much appreciated.
Many Thanks
Girish

The license is tied I the WCS hostname. So you would have to open a TAC case with Cisco license to rehost that license to the WCS you want to use. You would need smartnet also.
Sent from Cisco Technical Support iPhone App

SQL Web Edition license migration - SPLA

I currently have SQL Server web edition 2008 R2 SPLA lisence, for which I pay to my VPS server provider (hosting company).
I would like to know if I can get the SPLA lisence key from another supplier and use it with the instance which I already have on my machine.
Meaning that I would keep the existing instance and somehow replace the key with the one that I get from the new supplier.
Another question is - currently I have two instances of SQL Server web edition 2008 R2 on the same server, according to my understanding I don't need to pay for the SPLA license twice. Is this correct?
One last question - is there a way in which I can check on how many cores is the SQL Server web edition 2008 R2 running?
Say that I have a Quad-Code server but I bought licese for two cores, how can I verify that the instanace is running on two cores?

Hello,
This is a community forum for technical questions & issues.
For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
http://www.microsoft.com/sqlserver/en/us/get-sql-server/how-to-buy.aspx
http://www.microsoft.com/sqlserver/en/us/get-sql-server/licensing.aspx
http://www.microsoft.com/licensing/about-licensing/sql2012.aspx
Olaf Helper
[ Blog] [ Xing] [ MVP]

Trouble with WLC 4400 to 5508 Migration

We recently received a 5508 WLC and are in the process of migrating AP's from a 4402. The ios versions on the 5508 is 7.6.100.0 and the 4402 is 7.0.240.0. On our new WLC the 5508 we decided that we wanted to create new SSIDs and new vlans for better management. Is there an easier way to migrate ap's from the 4402 to the 5508? When we move one at a time it's tedious and sometimes we run into certificate issues, I've been doing as much research as possible as I'm helping someone with this move but many findings come to placing the new 5508 in the same mobility group as the 4402 then move the ap's from the 4402 to the new 5508. The new 5508 is in a mobility group of it's own separate from our 4402's. We have several but are only moving ap's from one 4402 at a time. Is this logical to place the 5508 in the same mobility group and move the ap's to it? If so how do I move the ap's from the 4402 to the 5508? Any suggestions, comments, help would be more then appreciated, thanks!

The fastest way to move APs from one controller to another (without using WCS/NCS/PI) is via CLI.
The command is very simple: config ap primary-base [5508 name] [AP name] [5508 Management IP address]
All you need is to put this in a spreadsheet and concatenate the AP name and you're set. Cut-and-paste to the 5508 and wait for the APs to start swinging across.

New-GL Migration and Upgrade together is possible??

Dear NewGL gurus.
Currently, our customer who uses SAP Enterprise version is
considering to do the upgrade from Enterprise to 6.0
and migration to New-GL at the same time with migration scenario 4.
I knew that "SAP strongly recommends the migration as independent project".
But, as long as I read the documents, it seems possible technically.
So, my questions are
1. If this customer does the upgrade and migration at the same time,
can they take SAP Migration Service from SAP AG properly?
2. SAP mentioned the reasons for this strong recommendation
such as
- 'migration is not only technical transfer'
- 'migration is conceptual change'.
However, I think the same thing can be said for upgrade project as well.
So, is there any other reasons for this recommendation?
BR
Yoshitada Kaneko

Dear Yoshitada Kaneko
Please also go through with below notes for more information.
Please also refer the FAQ note and below links
1070629
812919    SAP ERP new general ledger: Migration
1337521   safety delta in incremental work list update for phase 1
1171402   Compatibility IS-M/SD with General Ledger Accounting (new)
1072121   New general ledger migration: What is covered by Support?
1039752   New G/L migration: Restrictions and important information
1014369   NewGL migration: Availability of Development Support
1014364   New G/L migration: Information, prerequisites, performance
824995    LCC: Gen. questions/answers about local currency changeover
Please refer the more information at "/glmig" at service market place
http://wiki.sdn.sap.com/wiki/x/JghNCw
Reg
Madhu M

4400 AP license migration to 5500 - is it possible ?

Similar Messages

Maybe you are looking for