4400 Controller added radius now.......

you can only reach it if your on the same vlan as the management interface. The vlan is routing fine I can get to any other device on this vlan from otheres just not the controllers the only change was adding a radius server. I have 2 controllers same thing with both. I get an error trying to delete the radius entry as well. Any ideas?

You can try this Document for more information
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805e7a24.shtml
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml

Similar Messages

Is there any limitation of firmware or hardware for QoS configuration (4400 controller & 1252 AP's)

Hi Experts,
Before proceeding for adding AP model 1131 and 1252 into my set-up , I need to know whether any limitation of firmware or hardware for QoS configuration in wireless set-up .
I have 4400 controller and 1130 & 1250 AP models.

Hi Vinod,
Since you have 4400 controllers, you can run upto WLC 7.0.x code. Refer this for more detail
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
there is no specific limitation to 1131/1252 AP model as such, everything is WLC software dependent.
From later software 7.4.x,7.6.x,8.x, lots of improvement for QoS configuration & bandwidth control, but since your controller is old hardware, you cannot have those latest features.
here is a reference post on how QoS works in wireless environment
http://mrncciew.com/2012/11/28/understanding-wireless-qos-part-1/
HTH
Rasika
*** Pls rate all useful responses ****

Yesterday i sync music to my ipod touch from iTunesn but nothing showed up in the 'recently added' folder. now today neither my computer or iTunes is recognizing the ipod. I uninstalled iTunes and reinstalled it and restart the computer

Yesterday i synced my music to my ipod touch from iTunes. the musice went on but nothing showed up on the ipod in the 'recently added' folder. now today i went to connect it to the laptop and neither my computer or iTunes recognized the ipod. 1st a message showed up saying an ipod was detected but cuddn't be identified so reconnect and when i did nothing showed up again. i have uninstalled and reinstalled iTunes and restarted the computer a number of times but the ipod still wont show up. Can anybody help?

Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Does the iPod charge?
Have you tried another cable?
Another computer to help determine if you have an iPod or computer problem?

I downloaded my sons iCloud to my phone I deleted his when back and added mine now I'm stuck with his songs how do I get my iTunes back

I downloaded my sons iCloud to my phone I deleted his when back and added mine now I'm stuck with his songs how do I get my iTunes back

Sync your iphone with itunes.
http://support.apple.com/kb/HT1386
Good luck

What VLAN should the management interface be in on a 4400 controller?

Hi,
Some documentations put the management interface on a 4400 controller into a regular tagged VLAN. But some documentations put it in an untagged Native VLAN, the tag=0. What is the difference? Which configuration is optimal?
Thanks,
Justin

The answer is "it depends" :-)
I would not say any particular config is optimal though. If you have an established VLAN for management interfaces, I would use that. However if you put the management interface in the same VLAN as your AP's, AP's find your controllers easier. Otherwise you can use DHCP to point AP's to controllers.
I prefer to tag the frame as to which VLAN it belongs to, even if that is the same as the native VLAN.

4400 Controller Dropping DHCP Packets

We have a working wireless set up with an external DHCP server. We just tried to set up a new one but we are faced with this issue:
Client DHCP requests are forwarded from the controller to the serve. The server sees the requests and assigns addresses but for some reason the clients aren't able to get them. From what I'm reading around the 'net it looks like it could be an Option 43 setting or that th controlles is dropping the request. If anyone has ideas it would be much appreciated.
Cisco 4400 Controller with software ver. 4.2.61.0
Justin

Do you have an Option 43 setup for the clients, or for the AP's to connect to the controller over a L3 link? In the Interface setup that the WLAN is linked to, did you add or change the IP address to the list of DHCP servers for that link. The controller pretty much forwards everything on to the LAN, but then restricts the packets from the LAN to the WLAN. I hope this helps.

I updated by iPhone4 to IOS5 and added iCloud, now I cannot access my g-mail account? How do I get access back? Same thing happened to my iPad.

I upgraded by iPhone 4 to IOS 5 and added iCloud. Now I cannot access my Gmail account. It was there before the upgrade, now it's gone. I have tried to re-add the account, but it does not work. The same thing has happened to my iPad2. I have lost the access to Gmail. How do I re-establish contact?

Are they in your iTunes library on the computer? If so, sync with iTunes.
Connect the iPad to your computer and launch iTunes. Select your iPad from the left side under "Devices". Click on the apps tab in the iTunes window on the right. Select the Sync Apps heading. Select all of the apps in the list and then click on Sync or Apply in the lower right corner of iTunes.
You can also download the apps again for free in the app store via the purchased tab or download them again in iTunes on your computer and then sync the a[[s to the iPad. You have to use the same Apple ID that you bought the apps with in order to download them again for free.
Download Past Purchases
http://support.apple.com/kb/ht2519

Adding RADIUS VSAs on ACS 3.2 SE

I have tried to add a VSA to enable a Packeteer to authenticate using RADIUS on the ACS.
Using RDBMS synchronization to import the csv file below.
SequenceId,Priority,GroupName,Action,ValueName ,Value1,Value2,Value3
1,1,External,163,26,access=look,2334,1
The group name is 'External', Action is 163 which corresponds to ADD_RADIUS_ATTR.
From RDBMS Sychronization Import Definitions (http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/user/ag.htm#wp35130)
To add a vendor-specific attribute (VSA), set VN = "26" and use V2 and V3 as follows:
V2 = IETF vendor ID (which in this case is 2334)
V3 = VSA attribute ID (1)
V1 = In this case 'access=look'
After a couple of attempts I got the format correct but when I try and import the file I don't get an "INFO" message in the "Reports" section of the ACS indicating that the process was successful. I don't get any message at all, WARNING, ERROR or INFO.
From the FTP server I can confirm that the file was transferred.
What I should get is an INFO message similar to:
08/30/2004 16:27:50 INFO Sync complete: 1 transaction(s) 0 parse error(s) 0 process error(s)
Any ideas as to what is wrong would be much appreciated.
Cheers,
Aylmer.

HI you need to import the RADIUS VSA for PAcketeer from their site.
The link to the steps as shown below is ( might require u to subscribe & login)
https://packeteer.custhelp.com/cgi-bin/packeteer.cfg/php/enduser/std_adp.php?p_faqid=399&p_created=1046793530&p_sid=gszcDFBh&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PWRmbHQmcF9ncmlkc29ydD0mcF9yb3dfY250PTImcF9wcm9kcz0wJnBfY2F0cz0wJnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfZm5sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9YWNz&p_li=&p_topview=1
IN any case the same content is copied below:-
Also the stpes on how to do them is listed here
Create a User Defined Vendor
First, you need to create a User Defined Vendor.
1. Create a text file (packet.ini) and enter the following:
[User Defined Vendor]
Name=Packeteer
IETF Code=2334
VSA 1=Packeteer-AVPair
[Packeteer-AVPair]
Type=STRING
Profile=OUT
2. Name the file packet.ini.
Add the Vendor to the Database
Next, you need to add the above vendor to the database.
1. Go to the command prompt, and change the directory to the Cisco Secure utils directory (typically C:\Program Files\CiscoSecure ACS v3.0\Utils).
2. The instructions below install the vendor into User Defined slot 0. If you have other vendors, you need to change this number to a free slot. To see a list of slots and their assignments, use the csutil -listudv command. For example:
C:\Program Files\CiscoSecure ACS v3.0\Utils>csutil -listudv
CSUtil v3.0(2.5), Copyright 1997-2002, Cisco Systems Inc
UDV 0 - Unassigned
UDV 1 - Unassigned
UDV 2 - Unassigned
UDV 3 - Unassigned
UDV 4 - Unassigned
UDV 5 - Unassigned
UDV 6 - Unassigned
UDV 7 - Unassigned
UDV 8 - Unassigned
UDV 9 - Unassigned
3. Run csutil -addudv to and add Packeteer to UDV (User Defined Vendor) slot 0 or the next
open slot.
C:\Program Files\CiscoSecure ACS v3.0\Utils>csutil -addudv 0 c:\temp\packet.ini
CSUtil v3.0(2.5), Copyright 1997-2002, Cisco Systems Inc
Adding or removing vendors requires ACS services to be re-started.
Please make sure regedit is not running as it can prevent registry
backup/restore operations
Are you sure you want to proceed? (y/n)y
Parsing [c:\temp\packet.ini] for addition at UDV slot [0]
Stopping any running services
Creating backup of current config
Adding Vendor [Packeteer] added as [RADIUS (Packeteer)]
Adding VSA [Packeteer-AVPair]
Done
Checking new configuration...
New configuration OK
Re-starting stopped services
Verify that Packeteer was added.
C:\Program Files\CiscoSecure ACS v3.0\Utils>
C:\Program Files\CiscoSecure ACS v3.0\Utils>csutil -listudv
CSUtil v3.0(2.5), Copyright 1997-2002, Cisco Systems Inc
UDV 0 - RADIUS (Packeteer)
UDV 1 - Unassigned
UDV 2 - Unassigned
UDV 3 - Unassigned
UDV 4 - Unassigned
UDV 5 - Unassigned
UDV 6 - Unassigned
UDV 7 - Unassigned
UDV 8 - Unassigned
UDV 9 - Unassigned
4. Return to ACS Admin and select Network Configuration.
From the main screen select Network Configurtion and add the PacketShaper by supplying the AAA client Hostname, IP address: , Key. Scroll through the Authenticate Using choices and select RADIUS (Packeteer).
5. From the main screen select User Setup and enter a user name for a Touch or Look access user to the Packet Shaper. Supply the PAP/CHAP password. Leave other fields at defaults and scroll to the bottom
of the form. Be sure the Packeteer-AVPair box is selected and supply either
"access=touch" or "access=look" in the available entry space.

ACS 5.1 RADIUS Proxy - Adding RADIUS attributes

Is there anyway under ACS 5.1 to add RADIUS attributes to outgoing RADIUS proxy auth requests or failing this to RADIUS proxy accounting updates?
As soon as I configure a RADIUS proxy services, there is little config I can do other than to say whether or not the prefix and suffix is to be stripped.
I can add these attributes if using an external RADIUS box as an identity store, but I cannot do this for this particular service and instead I need to use RADIUS proxying.
Thanks
Paul

Hi Steve,
The shared secret is 100% correct.
Finally I find out that there may be some white lists for attributes.
If I keep NAS-Identifier , it will work.
But it can't pass all VSA (3GPP sub-attributes) , it only shows one or three in BOTH ACS and RADIUS Server.
The other is the RADIUS VSA User Define Options (which is in SA > C > D > P > RADIUS > RADIUS VSA > Edit ) .
When 'Vendor Length Field Size' changes to 0 , All sub-attributes pass thought ACS .
The RADIUS Server gets the message from NSA.
Of course, there is the Proxy-State attribute.
In this condition, the ACS has incorrect output in the sub-attribute.
Now I try 5.2 to see the problem exist or not.

WIRELESS 4400 CONTROLLER WPA-2

Hi Wireless Lan controller 4400 the documnetation on this product is awfull . I am trying to configure wpa-2 using 802.1x authentication or leap is this possable as for web interface cannot find were you set authentication type. if wpa-2 uses a particular type what is it. Probably a very dumb question but these option apper to be availble on all airnet products

Web authentication enhancements extend the total number of characters on Web authorization customization to 500 characters. The user can also use a "submit" button instead of a full user name / password challenge. A third enhancement allows Wi-Fi Protected Access/Pre-Shared Key (WPA/PSK) and WPA2/PSK to work with Web authentication. These enhancements provide more flexibility in deploying wireless networks with Web authentication.
Wireless LAN Controllers supported: Cisco 2000, 4100, and 4400 Series
Access points supported: Cisco Aironet 1010 and 1020 Series lightweight access points
http://www.cisco.com/en/US/products/ps6366/prod_bulletin0900aecd802d2742.html

MBP Slowed so much after upgrade, added RAM, now it crashed many times

Hi,
My MBP slowed so much righted away after I upgraded to OS X Mavericks, I upgraded to 16GB RAM as suggested, and the problem of slow got resloved, but now it crashed all the time, totally crased over 10 times within couple days(only few hours of using), I am pasting my MBP info here, please help to identify the crashing problem, is it the bad RAM? or some program caused it?   I brought my 16GB RAM at macsales.com.
This was my old thread:
https://discussions.apple.com/message/23847638#23847638
I use VM Ware. The crash only tell me "your computer had a problem" or something like that, but it won't say which program caused it. Sometimes I was using firefox, it got crashed, sometimes when I try to open VM Ware, it crashed, sometimes, I leave my MBP there, it crashed itself.
The following is my computer info. Thank you very much for your help!
Hardware Information:
          MacBook Pro (15-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2.2 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6750M - VRAM: 512 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:4:40
Disk Information:
          APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 749.3 GB (369.27 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R UJ-8A8 disk3 : (2.25 GB)
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          LaCie P'9233 Desktop Drive 4 TB
                    EFI (disk4s1) <not mounted>: 314.6 MB
                    LACIE SHARE (disk4s2) /Volumes/LACIE SHARE: 1.08 TB (1.04 TB free)
                    LaCie (disk4s3) /Volumes/LaCie: 2.92 TB (1.85 TB free)
          PIXART USB OPTICAL MOUSE
          Generic Mass Storage 1.06 GB
                    REALTOR (disk2s1) /Volumes/REALTOR: 1.06 GB (762.4 MB free)
          Hewlett-Packard HP Color LaserJet 3600
          Western Digital My Passport 071A 1 TB
                    disk1s1 (disk1s1) <not mounted>: 32 KB
                    disk1s2 (disk1s2) <not mounted>: 29 KB
                    disk1s3 (disk1s3) <not mounted>: 29 KB
                    disk1s4 (disk1s4) <not mounted>: 29 KB
                    disk1s5 (disk1s5) <not mounted>: 29 KB
                    disk1s6 (disk1s6) <not mounted>: 262 KB
                    disk1s7 (disk1s7) <not mounted>: 262 KB
                    disk1s8 (disk1s8) <not mounted>: 262 KB
                    My Passport (disk1s10) /Volumes/My Passport: 1 TB (984.14 GB free)
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          at.obdev.nke.LittleSnitch          (4050)
          com.vmware.kext.vmci          (90.5.7)
          com.vmware.kext.vsockets          (90.5.7)
          com.vmware.kext.vmnet          (0139.86.58)
          com.vmware.kext.vmx86          (0139.86.58)
          com.vmware.kext.vmioplug.12.1.13          (12.1.13)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] at.obdev.littlesnitchd.plist
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [loaded] com.google.keystone.daemon.plist
          [not loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [loaded] at.obdev.LittleSnitchUIAgent.plist
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.google.keystone.agent.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
User Login Items:
          Low Battery Saver
          VMware Fusion Helper
          iTunesHelper
          VMware Fusion Start Menu
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins:
          AdobeAAMDetect.plugin
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          googletalkbrowserplugin.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          QuickTime Plugin.plugin
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin.plugin
Bad Fonts:
          None
Time Machine:
          Mobile backups: OFF
          Auto backup: NO
          Volumes being backed up:
                    Macintosh HD: Disk size: 749.3 GB Disk used: 380.02 GB
          Destinations:
                    LaCie [Local] (Last used)
                    Total size: 2.92 TB
                    Total number of backups: 5
                    Oldest backup: 2012-05-05 22:57:55 +0000
                    Last backup: 2013-05-28 05:00:45 +0000
                    Size of backup disk: Excellent
                              Backup size 2.92 TB > (Disk size 749.3 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              43%          firefox
              12%          WindowServer
               3%          vmware-vmx
               2%          Little Snitch Agent
               1%          EtreCheck
               1%          Little Snitch Network Monitor
               1%          plugin-container
               1%          Skype
               0%          mDNSResponder
               0%          fontd
Top Processes by Memory:
          983 MB vmware-vmx
          344 MB firefox
          147 MB Skype
          131 MB com.apple.IconServicesAgent
          115 MB VMware Fusion
          115 MB plugin-container
          82 MB    Finder
          82 MB    TCIM
          66 MB    WindowServer
          66 MB    com.apple.WebKit.WebContent
Virtual Memory Statistics:
          10.80 GB           Free RAM
          2.18 GB Active RAM
          850 MB Inactive RAM
          2.18 GB Wired RAM
          1.15 GB Page-ins
          0 B      Page-outs

Hi Linc,
Sorry for my late reply, just got a chance to do it, it just crashed again. The following is the crash .panic from today and yesterday. Thank you very much!!
Anonymous UUID:
Tue Dec 17 09:49:26 2013
panic(cpu 0 caller 0xffffff8007edc19e): Kernel trap at 0xffffff8007e33b71, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000010692d003, CR3: 0x0000000029d33065, CR4: 0x00000000000606e0
RAX: 0xbfffff8029bb5cc0, RBX: 0x0000000000000000, RCX: 0x0000000036c92403, RDX: 0x0000000000000000
RSP: 0xffffff81c8970e70, RBP: 0xffffff81c8970ea0, RSI: 0x0000000000000003, RDI: 0x0000000000262f25
R8: 0xffffff8008380f20, R9: 0xffffff8008401910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0x0000000000000005, R13: 0x00000000ffffffff, R14: 0xffffff802889a9e0, R15: 0x0000000000000000
RFL: 0x0000000000010086, RIP: 0xffffff8007e33b71, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000010692d003, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81c897cc50 : 0xffffff8007e22f69
0xffffff81c897ccd0 : 0xffffff8007edc19e
0xffffff81c897cea0 : 0xffffff8007ef3606
0xffffff81c897cec0 : 0xffffff8007e33b71
0xffffff81c8970ea0 : 0xffffff8007e33ad7
0xffffff81c8970ec0 : 0xffffff8007e4f4f6
0xffffff81c8970f10 : 0xffffff80082ac76c
0xffffff81c8970f40 : 0xffffff7f884d0ecb
0xffffff81c8970f50 : 0xffffff7f89c169ef
0xffffff81c8970f60 : 0xffffff7f89c1e7e8
0xffffff81c8970f80 : 0xffffff8007edb76b
0xffffff81c8970fd0 : 0xffffff8007ef37c9
0xffffff81d9a4ba50 : 0xffffff7f899f0781
0xffffff81d9a4baf0 : 0xffffff7f899f004c
0xffffff81d9a4bb20 : 0xffffff7f899ef83a
0xffffff81d9a4bb70 : 0xffffff7f899eed4b
0xffffff81d9a4bbc0 : 0xffffff7f899c1fe7
0xffffff81d9a4bc80 : 0xffffff7f89a993d4
0xffffff81d9a4bce0 : 0xffffff7f89a996df
0xffffff81d9a4bd80 : 0xffffff7f893c1998
0xffffff81d9a4bdd0 : 0xffffff7f893c178b
0xffffff81d9a4bdf0 : 0xffffff7f893c15a9
0xffffff81d9a4be60 : 0xffffff7f893bcc23
0xffffff81d9a4bef0 : 0xffffff7f893bc9d7
0xffffff81d9a4bf30 : 0xffffff80082cd50e
0xffffff81d9a4bf70 : 0xffffff8007ec921d
0xffffff81d9a4bfb0 : 0xffffff8007ef3e26
      Kernel Extensions in backtrace:
         com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f884ba000->0xffffff7f884e2fff
         com.apple.driver.AppleACPIPlatform(2.0)[C3EF3AFE-30FD-3902-B336-BC5346C9A7A3]@0 xffffff7f89c10000->0xffffff7f89c68fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f88724000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f884ba000
         com.apple.iokit.IOAudioFamily(1.9.4f11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@0 xffffff7f893b2000->0xffffff7f893e0fff
            dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f893a1000
         com.apple.driver.DspFuncLib(2.5.2f2)[AD0D3B67-D34C-3FAD-AFEB-05828FBF7F55]@0xff ffff7f899ae000->0xffffff7f89a77fff
            dependency: com.apple.vecLib.kext(1.0.0)[3DB9AEA5-1A08-36B0-9124-6AD6C61AC452]@0xffffff7f89 97f000
            dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f893a1000
            dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f893b2000
         com.apple.driver.AppleHDA(2.5.2f2)[686CFF6C-31DF-31F2-BFF3-87E2D16249F7]@0xffff ff7f89a81000->0xffffff7f89b0ffff
            dependency: com.apple.driver.AppleHDAController(2.5.2fc2)[C885D311-21A4-3C5B-AF99-4B8C27D58 C42]@0xffffff7f89965000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f88dbe000
            dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f893b2000
            dependency: com.apple.iokit.IOHDAFamily(2.5.2fc2)[2FD5ECCE-6500-3FA0-B3AB-45E2263D9980]@0xf fffff7f8992e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f88d7b000
            dependency: com.apple.driver.DspFuncLib(2.5.2fc2)[AD0D3B67-D34C-3FAD-AFEB-05828FBF7F55]@0xf fffff7f899ae000
BSD process name corresponding to current thread: coreaudiod
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID:
Kernel slide:     0x0000000007c00000
Kernel text base: 0xffffff8007e00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 41847696472943
last loaded kext at 41507790165447: com.apple.macos.driver.AppleUSBEthernetHost          7.0 (addr 0xffffff7f8a4d5000, size 28672)
last unloaded kext at 41568356960139: com.apple.driver.AppleUSBCDC          4.2.1b2 (addr 0xffffff7f8a4d1000, size 16384)
loaded kexts:
com.vmware.kext.vmioplug.12.1.13          12.1.13
com.vmware.kext.vmx86          0139.86.58
com.vmware.kext.vmnet          0139.86.58
com.vmware.kext.vsockets          90.5.7
com.vmware.kext.vmci          90.5.7
at.obdev.nke.LittleSnitch          4050
com.apple.filesystems.smbfs          2.0.0
com.apple.filesystems.msdosfs          1.9
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AGPM          100.14.11
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.kext.AMDFramebuffer          1.1.4
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleIntelHD3000Graphics          8.1.8
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.AMDRadeonX3000          1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.kext.AMD6000Controller          1.1.4
com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleSDXC          1.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOSurface          91
com.apple.iokit.IOAcceleratorFamily          98.7.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.kext.AMDSupport          1.1.4
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0
System Profile:
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x85F7, 0x483634314755393747313630304700000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x85F7, 0x483634314755393747313630304700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS727575A9E362, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: Hub
USB Device: iPhone
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: USB 2.0 Hub [MTT]
USB Device: USB OPTICAL MOUSE
USB Device: Mass Storage
USB Device: P'9233 Desktop Drive
USB Device: My Passport 071A
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1
=====================================================================
Anonymous UUID:
Mon Dec 16 11:12:08 2013
panic(cpu 4 caller 0xffffff80050dc19e): Kernel trap at 0xffffff7f86f0e4b9, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x0000000100542000, CR3: 0x000000002d2e6065, CR4: 0x00000000000606e0
RAX: 0xbfffff81c5bd9438, RBX: 0x00000000fffffb06, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff81d6bc3930, RBP: 0xffffff81d6bc3940, RSI: 0xbfffff81c5bd9438, RDI: 0xffffff8026e83800
R8: 0xffffff81c5bd9438, R9: 0xffffff81c5bd9438, R10: 0x0000000000000001, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff820a298b90, R14: 0xffffff81c5fdf468, R15: 0xffffff81c5fdf4b8
RFL: 0x0000000000010246, RIP: 0xffffff7f86f0e4b9, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000100542000, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff81cbbe5df0 : 0xffffff8005022f69
0xffffff81cbbe5e70 : 0xffffff80050dc19e
0xffffff81cbbe6040 : 0xffffff80050f3606
0xffffff81cbbe6060 : 0xffffff7f86f0e4b9
0xffffff81d6bc3940 : 0xffffff7f86f0e42c
0xffffff81d6bc3960 : 0xffffff7f86f096dc
0xffffff81d6bc39c0 : 0xffffff7f86f0dc14
0xffffff81d6bc39e0 : 0xffffff7f86f0e813
0xffffff81d6bc3a20 : 0xffffff7f86f151ba
0xffffff81d6bc3a50 : 0xffffff7f86f05779
0xffffff81d6bc3a80 : 0xffffff7f86f11031
0xffffff81d6bc3ae0 : 0xffffff7f86f03d05
0xffffff81d6bc3b70 : 0xffffff80054cccda
0xffffff81d6bc3b90 : 0xffffff80054cd83e
0xffffff81d6bc3bf0 : 0xffffff80054cb28f
0xffffff81d6bc3d40 : 0xffffff80050b6008
0xffffff81d6bc3e50 : 0xffffff8005026bb1
0xffffff81d6bc3e80 : 0xffffff80050139b5
0xffffff81d6bc3ef0 : 0xffffff800501e003
0xffffff81d6bc3f70 : 0xffffff80050c921d
0xffffff81d6bc3fb0 : 0xffffff80050f3e26
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C 5]@0xffffff7f86efa000->0xffffff7f86f52fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f856ba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f85f7b000
BSD process name corresponding to current thread: vmware-vmx
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID:
Kernel slide:     0x0000000004e00000
Kernel text base: 0xffffff8005000000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 9601777324506
last loaded kext at 6172618490305: com.apple.filesystems.smbfs          2.0.0 (addr 0xffffff7f876b8000, size 335872)
last unloaded kext at 400465741728: com.apple.driver.AppleUSBUHCI          650.4.0 (addr 0xffffff7f85d0c000, size 65536)
loaded kexts:
com.vmware.kext.vmioplug.12.1.13          12.1.13
com.vmware.kext.vmx86          0139.86.58
com.vmware.kext.vmnet          0139.86.58
com.vmware.kext.vsockets          90.5.7
com.vmware.kext.vmci          90.5.7
at.obdev.nke.LittleSnitch          4050
com.apple.filesystems.smbfs          2.0.0
com.apple.filesystems.udf          2.5
com.apple.filesystems.msdosfs          1.9
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AGPM          100.14.11
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.kext.AMDFramebuffer          1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleIntelHD3000Graphics          8.1.8
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.AMDRadeonX3000          1.1.4
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.kext.AMD6000Controller          1.1.4
com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleSDXC          1.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.IOAcceleratorFamily          98.7.1
com.apple.kext.AMDSupport          1.1.4
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0

Restoring the Configuration backup in 4400 Controller

I had a strange issue. I am having a controller 4400 with 7.0.250.0. It went faulty and i got the replacement. For the new box i upgraded to 7.0.250.0 and when i am restoring the backup i am getting the following error
Cisco Controller) >cp: unable to remove `/mnt/application/erversn.txt': Read-only file system
cp: unable to remove `/mnt/application/erversn.txt': Read-only file system
Please let me know if you faced similar issues
Thanks & Regards
Sreejith R

Hi Team;
It was a hardware issue. Replaced the hardware and its fine.

AE added and now can't use AirTunes

I've had an Airport Express for a while used only for AirTunes.
Now I have added an AirPort extreme base station for wireless networking, and no longer can use iTunes to stream music to the stereo.
The steps I have taken are these:
I moved the express into the same room with the base station and connected it directly to the base station with ethernet. I then did a hard reset on the express so that I could see it with Airport Utility. Then I followed these instructions from AirPort Utility help:
AirPort Express: How to join an existing wireless network in client mode
1. Plug AirPort Express into a power outlet.
2. On your computer, join the wireless network created by AirPort Express.
3. Open AirPort Setup Assistant. Mac users: Find it in /Applications/Utilities/.
4. Select "Set up a new AirPort Base Station" and click Next.
5. When the AirPort Setup Assistant confirms that it has found your AirPort Express, click Continue.
6. Select "Connect to my current wireless network."
Be sure that "Extend the range of my AirPort wireless network" is not selected (this option is used only for WDS).
Click Next; AirPort Express Assistant will scan for your existing wireless network. Once it finds it, click Next again.
7. Choose the correct network (there may only be one) from the Wireless Network Name menu. If the wireless network is password protected, you will be prompted to enter the password. Enter the password and then click Next to continue.
8. Enter the name of your AirPort Express.
Tip: If you don't know the name, it's what appears in iTunes as the name of your AirTunes remote speakers.
Click Next.
( etc.)
So, everything seemed to go fine. The original AirPort Express network disappeared, I assume because it "joined" my new wireless network named for the base station.
But... iTunes only remembers the original express network. It's not recognizing the new. I am connected to the only Apple Network XXXXX that there is though. My internet and printers all seem fine, it's just the Airtunes thing.
So any ideas what I'm doing wrong?

Uh oh, so can no one help me with this? I sorely miss being able to stream my iTunes to my stereo.
Any suggestions would really be appreciated.

2nd domain controller added does not process logins

This probably a very simple answer, but have search wide/far and still can't fix my issue; I'm hoping someone here can point me in the correct direction. I'm just not a wiz with DNS/AD as I used to.
I am building a test domain in my VM environment and when I take down the #1 DC, (the one I built first), my test Win7 machine can NOT connect to the domain. I'm more than certain this is a DNS issue, but do not know how to fix it. This is an
AD integrated DNS, both DC's are GC's, both are running DNS and each point to themselves. I'm using a Win7 machine that has static IP address - machine is a member of the test domain.
In order to "simulate" DC1 going down, I simply disable the NIC.
DC1: IP = 10.10.1.5
DC2: IP = 10.10.1.10
win7 Host: IP =10.10.2.10 (static assigned, so not AD integrated DHCP)
From the host, here is the IPCONFIG/all
C:\>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : WIN7-ESX-PC
   Primary Dns Suffix . . . . . . . : doghouse.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : doghouse.local
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
   Physical Address. . . . . . . . . : 00-0C-29-19-16-C4
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.10.2.10(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 10.10.1.5
                                       10.10.1.10
   NetBIOS over Tcpip. . . . . . . . : Enabled
Also, when the NIC is UP on DC1, I see the following output on NSLOOKUP
C:\>nslookup
DNS request timed out.
    timeout was 2 seconds.
Default Server: UnKnown
Address: 10.10.1.5
> set type=all
> _ldap._tcp.dc._msdcs.doghouse.local
Server: UnKnown
Address: 10.10.1.5
_ldap._tcp.dc._msdcs.doghouse.local     SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = doghouse-dc2-srv.doghouse.local
_ldap._tcp.dc._msdcs.doghouse.local     SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = doghouse-dc1-srv.doghouse.local
doghouse-dc2-srv.doghouse.local internet address = 10.10.1.10
doghouse-dc1-srv.doghouse.local internet address = 10.10.1.5
when the NIC is down I get this, as well as if I reboot the machine and try to login, it says "no domain services available
> _ldap._tcp.dc._msdcs.doghouse.local
Server: UnKnown
Address: 10.10.1.5
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to UnKnown timed-out
Any help would be appreciated!

Hi all - sorry for the delay in responding (work happens).
So yes, the SVR records were properly listed in both DNS servers and I did multiple reboots; rebuilt the SVR records from scratch - just about everything under the sun -- I think added 2 more DC's to the mix, and moved FSMO roles over to one of them, then
began to demote the other 2 DCs to see if it was something in their build--in the end though I was never able to remove the original DC1 out of the domain - gave me odd messages about not being able to contact the domain to have it remove. (this is after
FSMO roles were moved off) -
Long story short, I blew the configuration away and yet again started from scratch and it is working now as I'd expect. Although when I do disabled the NIC from DC1 to simulate failure, it still takes about 10-15 sec for the machines to login to the
domain - when I type: echo %logonserver% it does confirm it hits DC2 when DC1 is down, but still a little delay. I think the difference in the new configuration is that I set DC2's primary dns server to DC1. I also installed DFS and the NETLOGON
shares are replicating, (not sure if that made a difference)
I guess for now we can consider this answered although I'm not sure who to give points to...I do appreciate everyone's time in reading and trying to help -- I bet this wont' be the last time I post here.

Added Array, Now What?

Forgive my incompetence about adding an array, but all the posts about people losing everything has me apprehensive about restarting the system. I do have stuff backed up, but do not want to create a mess if something goes wrong at this point.
I added a RAID 5 array, filling out the lower half of an Xserve. Raid admin recognizes it under arrays & drives. The arrays are listed under the picture as 1 RAID 5 and 2 RAID 5.
Now what?
Do I just use "Add System" in Raid Admin? (right now it shows one system with an address) or, do I shut everything down, restart and then run disk utility according to the manual?

You should enable journaling. It doesn't affect performance in any meaningful way.
What journaling DOES do is prevent the system from having to run 'fsck' on the disk, should it be shut down uncleanly. On a 1 TB volume, fsck can take an hour (or hours!) to run, and the system cannot finish booting until this time, so what you'll see is that your system appears to "hang" at boot time, and unless you know what's going on and have the patience to wait 1 or 2 or 3 hours until it completes, will probably panic and think your machine is hosed. I've seen it way too many times. Enable journaling, please

4400 Controller added radius now.......

Similar Messages

Maybe you are looking for