4400 DTLS error AP will not register.
I have just upgraded one of our 4400 to 7.0.98.0. Most of the AP re-registered with out issues. I have two AIR-LAP1142N-E-K9 on a remote site that will not re-register.
I have pointed them to another 2125 WLC ( 7.0.98.0) and they register fine. Point them to yet another 4400 (7.0.98.0) I get the same issue.
I am getting this error when the register on the 4400s.
*Jan 11 14:39:24.000: %CAPWAP-3-ERRORLOG: Selected MWAR 'abzewwlc'(index 1).
*Jan 11 14:39:24.000: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 11 07:05:55.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 144.46.211.5 peer_port: 5246
*Jan 11 07:06:55.000: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 144.46.211.5:5246
I suspect it may be as they both have In the client config.Then again maybe not.
Configured Switch 1 Addr 158.139.177.203
Configured Switch 2 Addr 144.46.214.25
Question 1 if I do a "clear config except static IP" will I still be able to telnet tp them or will they default to no telnet no ssh ?
Question 2 any idea how to get past this DTLS error ?
Hi Stuart,
Please note that the AP is configured with wrong parameters for the 4402 WLC.
On the AP we have:
Primary Cisco Switch Name........................ lonwlc01
Primary Cisco Switch IP Address.................. 144.46.214.25
Secondary Cisco Switch Name...................... abzewwlc
Secondary Cisco Switch IP Address................ 144.46.211.4
But the 4402 WLC actually has:
System Name...................................... abzwwwlc
IP Address....................................... 144.46.211.6
Also, if you'd like the AP to join the 4402 as a first choice, you should configure it as follows:
Primary Cisco Switch Name........................ abzwwwlc
Primary Cisco Switch IP Address.................. 144.46.211.6
Secondary Cisco Switch Name...................... lonwlc01
Secondary Cisco Switch IP Address................ 144.46.214.25
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
Similar Messages
-
Hello,
Changing PDF properties (meta tags: author, title, comment, theme etc) in Adobe Reader as well as in Windows Explorer are disabled rsp does not funtion.
1. In Adobe Reader "File properties", the overwriting rsp insertion of text is disabled in grey.
2. In Windows Explorer, following message window appears: "Properties change: Due to an unexpected error, properties can't be changed - Error 0x80040154: class not registered"
(Sorry for the bad translation, but I am running the German version)
Is there a technical explanation and solution for this problem? In other PDF programms, the change of meta data does work fine.
=====================
Windows 7 64-bit, Acrobat Reader X 10.1.1. (Standard PDF Viewer)
=====================
Many thanks & best regards
adiflis@MadEyes: I found out you had to set a site address in wordpress the hard way, i set it for a dns host and I couldn't get into the wp-admin page or load any sort of image or css.
At the moment i have a server root directory with a wordpress folder on it. Eg:
(/srv/http)/wp/
and a test index file in the root. Eg:
(/srv/http)/index.html
The index file doesn't show up publicly, but it will on the local network.
I set the apache port back to 61669 and tested with canyouseeme.org. I got (i will email you the ip addy):
Success: I can see your service on X.X.X.X on port (61669) >EDIT: If I close apache, then it fails. Start it back up, it succeeds.
Your ISP is not blocking port 61669
I also nmap'd myself and got this:
Host is up (0.025s latency).
Not shown: 996 closed ports
PORT STATE SERVICE
23/tcp open telnet
5989/tcp open wbem-https
6881/tcp filtered bittorrent-tracker
8080/tcp open http-proxy
A port forward is definitely set up, so i dont know how much I can trust this (I did make 6881, but them program isn't open).
Any of this any help?
>EDIT: Excerpt from Webmin: "System hostname localhost.localdomain" this doesn't seem right.
Localhost:
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost ablanck
#::1 ablanck.localdomain localhost
Last edited by lucytheboydog (2011-02-07 04:34:24) -
ATA 186 (SIP coverted to SCCP) will not register to CM
I have a situation where SIP ATA's were ordered instead of SCCP. I downloaded and upgraded the ATA's with Version 3.2.3 software for SCCP. The ATA's pull ther configuration form the callmanager tftp server, but they will not register with callmanager. Anyone have any ideas that might help?
Thanksyou can browse to the ATA, in 3.2.3 just to the ip-address
http://ata-ip-address/
Also, can you see errors in the CCM traces where the ATA tries to register to?
Is your environment using DNS, or do you have ip-addresses for CallManager server config? -
Hi all,
I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
Cheers and thanks in advance.Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing -
I tried to reload , received error. Will not send trouble shooting CRASH REPORT. Was working great until crash. Will not accept or I cannot figure out how to have forefox accept updates for ADOBE updates or my virus protection STOP SIGN.
<blockquote>Locking duplicate thread.<br>
Please continue in your previous thread: [[/questions/964962]]
</blockquote> -
Hi, when I connect my iPod to my computer it will register but it will not register in iTunes! Any help? Thanks.
Here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows -
Cisco SIP Phone 9971 will not register on CME 8.6
Hello,
I'm trying to configure a Cisco SIP Phone 9971,
but it won't register on CME 8.6, which is running on a 2811
The Phone shows this error message: Phone Not Registered.
And when I check the the Status Messages in the Phone, I see the following:
VPN Error: vpn is not configured
Actually, it shows all these 4 messages in a constant Loop:
12:01:59a SEP189C5DB6BD09.cnf.xml (TFTP)
12:01:59a No Trust List instaled
12:01:59a Updating Trust list
12:02:00a VPN Error: VPN is not Configured
It seems that this VPN Error is keeping the Phone from registering.
This is repeated for ever and the Phone never registers; at least that's what it appears.
However, when I do a sh voice register pool, I get the following:
C2811#sh voice register pool 1
Pool Tag 1
Config:
Mac address is 189C.5DB6.BD09
Type is 9971
Number list 1 : DN 1
Proxy Ip address is 0.0.0.0
Current Phone load version is Cisco-CP9971/9.4.1
DTMF Relay is enabled, rtp-nte
Call Waiting is enabled
DnD is disabled
Video is enabled
Camera is enabled
Busy trigger per button value is 0
call-forward b2bua busy 68600
keep-conference is enabled
registration expires timer max is 3600 and min is 120
username adm password adm
kpml signal is enabled
Lpcor Type is none
blf call list is enabled
Transport type is udp
service-control mechanism is supported
registration Call ID is [email protected]
Registration method: per line
Privacy feature is not configured.
Privacy button is disabled
active primary line is: 1010
contact IP address: 172.35.140.12 port 5060
Phone SIS Version: 6.0.2
GW SIS Version: 1.0.0
Dialpeers created:
Dial-peers for Pool 1:
dial-peer voice 40001 voip
destination-pattern 1010
session target ipv4:172.35.140.12:5060
session protocol sipv2
dtmf-relay rtp-nte
digit collect kpml
codec g711ulaw bytes 160
no vad
call-fwd-busy 68600
after-hours-exempt FALSE
Statistics:
Active registrations : 4
Total SIP phones registered: 1
Total Registration Statistics
Registration requests : 4
Registration success : 4
Registration failed : 0
unRegister requests : 0
unRegister success : 0
unRegister failed : 0
Attempts to register
after last unregister : 0
Last register request time : 18:11:43.551 UTC Mon Feb 24 2014
Last unregister request time :
Register success time : 18:11:43.551 UTC Mon Feb 24 2014
Unregister success time :
C2811#
This sh voice register pool seems to indicate that the Phone has actually registered.
But I still get the Phone Not Registered message on the screen!
I did some Debugs and they also seem to indicate that the Phone has indeed registered:
Feb 24 18:01:12.399: VOICE_REG_POOL: Creating param container for dial-peer 4000
1.VOICE_REG_POOL pool->tag(1), dn->tag(1), submask(1)
VOICE_REG_POOL pool_tag(1), dn_tag(1)
Feb 24 18:01:12.399: VOICE_REG_POOL: Created dial-peer entry of type 0
Feb 24 18:01:12.399: VOICE_REG_POOL: Registration successful for 1010, registration id is 1
Feb 24 18:01:12.411: VOICE_REG_POOL: Contact matches pool 1 number list 1
Feb 24 18:01:12.411: VOICE_REG_POOL: GW SIS: X-cisco-cme-sis-1.0.0
Feb 24 18:01:12.411: VOICE REGISTER POOL-1 has registered.
Name:SEP189C5DB6BD09 IP:172.35.140.12 DeviceType:Phone
So frankly, I have no idea why the Phone keeps showing the Phone Not Registered message.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811#VPN is not Configured prints on all phones now with the built-in VPN client if VPN isn't configured. That's normal and is just cosmetic. That should not be causing your registration issues.
-
I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.
The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes. -
IMac will not register any type of CD
Hello all,
I have owned this iMac for about a year and a half now and this is the first time a problem like this has arisen.
I insert a regular CD (The Beatles for example) and the computer will not register it as having been entered at all (no icon, iTunes does not load). It will also not eject the disk.
When I restart the computer, the disk does come out, but the computer does not read it. What could be causing this? I have tried over ten different CDs- a few of which the computer has registered before.
Thank you in advance for the help!Hello all,
I have owned this iMac for about a year and a half
now and this is the first time a problem like this
has arisen.
Did the problem just start or has it been an off again on again situation?
I insert a regular CD (The Beatles for example) and
the computer will not register it as having been
entered at all (no icon, iTunes does not load). It
will also not eject the disk.
Sounds like your CDRom has gone south
When I restart the computer, the disk does come out,
I think this is hard coded into OSX - to eject a bad (or what it considers a bad) CD/DVD. I could be wrong but the new Intel iMac have no eject button and to get one out the user must restart the system (and hold down the right mouse button) and the CD/DVD will eject.
but the computer does not read it. What could be
causing this? I have tried over ten different CDs- a
few of which the computer has registered before.
Again, it sounds like your CDRom is no longer working. Do you have an external CDRom you could USB plug in? I use the internal SuperDrive as well as an external USB LaCie Slim DVDRW/CDRW. I let the LaCie do the heavier recording work hoping to save wear/tear on the SuperDrive (and being forced to return the machine to get it fixed/replaced).
BTW, does your CDRom show up as identified (and working) hardware on your system?
Thank you in advance for the help!
Hudson -
Installed iTunes on a 1TB drive designated H:. Bought a 3TB drive designated G:. Downloaded iTunes update. On "Run" command, it will not let me change the destination drive, so it registers an error, and will not update. App freezes, windows says to upgrade it.
I went to Edit>Preferences>Advanced, G: is showing as the destination drive.
-
My computer has stopped recieving charge. The charger is in great condition, but it will not register, nor charge my computer. I do not know if its my mac or the charger. Is there any way to fix this?
Do you have another charger to test with?
It is very possible that somehow the wire might have gotten bent without your knowledge and that is why it is not working.
If you have an Apple store near you, you might want to set up a genius appointment so that they can test it for you. -
My serial number will not register
I purchased this photoshop lightroom but the serial number will not register and Adobe dont seem to offer any real help
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
HT4623 iPhone 4s will not register with server after iOS 6 update
My iPhone 4s will not register with server after iOS 6 update. Does anyone has similar problem?
Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG -
New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).
Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?
-
Error -2147319779 Library not registered when trying to use ActiveX to open microsoft word
Hi
I am having problems when I try to run an executable on a PC. My Development PC that has Labview 8.2 and Microsoft Word 2000. I am able to run my vi (see pic attachement) without any problems. I compile it as an executable and run it on my Development PC and everything still works ok. I deployed it on another machine with Labview Run-Time Engine Version 8.2 and it works ok. I tried it again on a third PC and get the following error
Error -2147319779 Library not registered
All PC's are running windows XP and all have microsoft word 2000 installed.
I have tried uninstalling National instruments software (Run-time Engine) as well as Microsoft Word on the failing PC, but still no luck.
Does anyone have any suggestions.
Thanks
Steve
Attachments:
open word and save changes.jpg 59 KBHey Steve,
I hate to throw links at you, but it appears this problem has occurred with developers before.
Easy text Report.VI...not so easy (You have to love a title like that)
Problem with LabVIEW Run Time communicating with Access Database
These links may not seem relevant to your issue, but at its base the Report Generation and Database Connectivity toolsets are simply ActiveX/.NET calls into Microsoft products (or ODBC, etc.). This is similar to what you're doing.
Also, I would try reinstalling MS Office. This has been known to solve the problem.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |
Maybe you are looking for
-
Freight Calculation while posting GR in MIGO
Hi Experts, The following is the scenario :- A Purchase Order is raised for procuring coal from the coal supplier. A freight condition is maintained in the Pricing Schema of the Coal Purchase Order. At the time of making a GR in MIGO a freight vendor
-
Satellite A200-10Z: How to know if my DVD writer support Labelflash
Hi, I have Toshiba Satellite A200-10Z that came with supermulti DVD writer model HL-DT-ST DVDRAM GSA-T20N, I don't know from which manufacturer this model!! Does anyone know if this model support Labelflash?! ?:|
-
Hi All, i need information on how to do deltas on ods. i did two full uploads for ods 0fiar_o03 and then infocube. i need to do delta for this ods and cube. Please give me the steps to do delta for ods and infocube. regards raja
-
How can i use windows live email with photoshop elements 5.0
How to use Windows Live email program with Photoshop Elements 5.0. The prefference only lets you use Outlook express. Any help please. Al [email protected]
-
Hi All, I have a field, in it having records but in between there r blank also.... means.... 10.50 12.35 ......... (blank) 16.25 23.25 NOTE:- i want 0.00 in place of ...........(blank) area, not blank field.. Pla let me know.... Thanks