440s errors and now BSOD
440s came preinstalled with win7Pro, used RDVD for win8Pro then updated to 8.1 Pro.
After initial install, was copying some files off old laptop and was planning to put on new one left 440s on to find later it had restarted and had an issue with the HDD ( SSD) - error 2100: Detection error on HDD0 ( Main HDD), press esc to continue. Then day later it suggested it had a non genuine battery which would not charge properly. Then later same day started to blue screen whenever it was either hibernated( via shutdown menu) or put to sleep ( close lid) - suggests it due to SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (vwififlt.sys). Lodged ticket Monday for initial errors expecting lenovo to contact me to do diagnostics to confirm HW is OK, now Friday arvo they still have NOT contacted me despite numerous updates to the ticket giving as much info as I can. Anyone had similar issues?
Also ran all windows updates, Lenovo updates etc, 440 is fully patched in all respects.
Hi Collew,
Welcome to Lenovo Community Forums!
I’m really sorry to hear that your Lenovo ThinkPad T440s is having multiple issues.
If the machine started showing 2100: detection error on HDD0, try reseating the HDD and check. Also, try using the HDD with another system if possible and see if the error appears. This error comes up usually when Hard disk drive is failing. If there is any critical data in your HDD, I would suggest you to take a backup at the earliest.
Regarding the battery not genuine message, try updating the BIOS and power management driver. Install Lenovo settings dependency package and check if the issue gets fixed.
BSOD seems to occur due to vwififlt.sys (Windows Virtual Wi-Fi Filter Driver). I would suggest you to reinstall the Wi- Fi drivers completely from device manager, reinstall and check if BSOD occurs.
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
I recently got a new computer because my old one wouldn't let me open creative suite 3 after it generated a error and now I can't deactivate the key to activate it onto my new computer. Any help would be appreciated. Thank you.
You are allowed to have two activted installations, so if the first machine is the only machine with an activated installation there is nothing prohibiting you from installing and activating on the new machine.
You can contact Adobe Support thru chat to have the old installation deactivation.
Serial number and activation support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I attempted to update my iphone5 to 7.1.1 There was an error and now my phone is erased. I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also, do you remember what the error message said? -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?
Hi Brennacoyle,
Can you please share the error message that you are getting while trying to download on the new MAC ?
Cheers,
Kartikay Sharma -
trying to do the new update. it said runtime error`` and now my itunes is empty on my computer, where/how do I get my music and playlists back?
See Empty/corrupt library after upgrade/crash.
tt2 -
I tried to update my iphone4, in the middle it gave an error and now when try to connect it the computer doesnt even detects it and neither does itunes
Power the phone off completely. Plug the USB end of the cord into the computer, leaving the other end unplugged from the phone. While the phone is powered off, open up iTunes, hold down the home button on the phone, and plug in the USB cord to the phone, making sure you keep holding down the home button. In about 15 seconds you should get a pop-up in itunes saying that it's detected an iPhone in recovery mode. Click 'Ok' and 'Restore'.
Your iOS update crashed and your phone is in recovery mode. The good news is that this will fix it, bad news is that unless you had everything backed up in either iTunes or iCloud, you've lost everything as your phone was wiped when the iOS update crashed. -
I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings. Is there anything I can do?
You have to restore your iPhone. Same thing happened to me and many others. Sorry man.
-
i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?
Hello bajura007,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Yesterday when I opened my Itunes I have an update. I try to update but appera an error and now I can open my itunes
Error 7 (windows eeror 126)
Many thanks.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I just updatet my Iphone 4S to IOS6 and the where a error, and now itunes telling me I need to recover my Iphone to use my Iphone and to recover I will lose all my media files and other files! this is an disaster! What can I do?
EVEN MY IPHONE DON'T WORK ANYMORE !! NOO!!I exactly have the problem. Tried to get help from AT&T and Apple. Still no solution...
-
I was in the middle of the new update and it said there was a error and now my ipod touch will not turn on or off or anything it is just a picture of the apple.
thank you
KristyError 11 is a strange one...if you search the discussions for error 11 you will get a number of hits but none with a real resolution other than getting the iPod to restore, which you have done. And one person indicates this does not appear in the support data base...already found that out.
If you have restored, have a backup and can restore from that, you might try the update again, or wait for the next update whenever that comes out.
Not a very satisfactory answer but if it is working again... -
I was updating to the latest version of IOs 7 last night and when i woke up there had been an error with the update. When I tried to use my iphone the next morning it said there was an error and i needed to restore it. I did and now it is not letting me restore from backup. I backed up the phone with itunes just before doing to update. I'm so frustrated, now what do i do? it says to go to an apple store or something but i dont live near to one. Anyone suggestions?
What, exactly, happens when you try to restore it?
-
I/O error / and now it's not showing in explorer
Hi!
My shuffle has always been acting really strange, ever since i bought it more than a year ago. It has always been bugging me by diconnecting itself while transferring files, and then re-connecting itself again..
This time, it did this about 5 times, and then it just froze. It couldn't be recognized by itunes anymore, but was still in the windows task-bar, and i could eject it and re-connect it. This wouldn't help though, and in the explorer it showed as I:, but if i tried double-clicking it, i got an I/O-error. Same thing with the ipod-restore-software, it froze - or simply wouldn't recognize the ipod. Now the icon in the task-bar has dissappeared and explorer can't find it, so i guess windows no longer recognizes it either. When i connect the shuffle to any USB-port (rear or PCI-card) it blinks: short blink amber/green - long green - short blink amber/green - long green and so on..
The question is: why!? why today? and how can i repair it? my first thought was that the shuffle firmware was damaged by too many disconnect-reconnects, but i can't even format it cos of the I/O-error...and now it doesn't even show in explorer...bohoo..please help me! thanks /carl
Shuffle Windows XP Prothis what happen to me too. When i plug in it recognize as removable disk but can;t open. it froze. Itune won;t recognize it and can;t update bc it froze when initializing. I get a ipode service error and ipod manager error.
Windows XP Pro -
Phone was not updated on time so it automatically shuts off and you get a plain black screen until it is recovered and updated. Well when i did the update and recovery I received an error. I went through the steps to fix the error, I had to restart my computer and now the phone isnt recognized on my computer or in itunes. The screen is still completely black so pushing the home button and plugging in to computer still does nothing. Device manager shows nothing in usb port, and apple mobile device software is installed and running. Any help?
Hello agardner37701,
I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode. I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
My time machine keeps freezing when I am backing up
I have recently purchased a seagate 1.5TB external hard drive and am trying to back up my computer using time machine. My compute is 56GB large. I have tried 3 times and have been forced to stop it everytime because it keeps freezing. What should I d
-
I'm trying to stream HBO GO from my iPad to my TV. I hear audio on the TV but don't see video. Am I missing a setting?
-
Why can't I select preferred wifi networks
why can't I select preferred wifi networks
-
EDIFACT/X12 Interchange counter tracking
Hi Experts, Need some suggestions on the best way of handling this. Currently doing an SAP PI 7.1 implementation and one of them requires pickup/droppOFF to VAN. So as you know each Interchange is numbered in incrementing sequence. e.g 112, 113, 114
-
Hello Gurus Please can u give me a detailed functional responsibilities or duties of a SAP MM Second Level Support? Thanks Rash