45.23's Resolved SBA Issue on MSI 5900 Ultra

Couldn't enable SBA on MSI 5900 Ultra with 45.20 drivers. Fast Writes was ok. 45.23's resolved issue allows me to select, but have to reset after each reboot.

The motherboard chipset drivers (excluding those for the onboard LAN and audio) were installed before the nVidia drivers.
I re-installed the operating system (item 3 in my first post).
P.S.
Just used Driver Cleaner and tried again but still no joy.

Similar Messages

MSI 5900 Ultra ram specs plz!

Hi,
I can't seem to find any information on what ram my MSI 5900U is using. I know the msi 5950's are using 2.2ns ram.
can someone help clear this up for me please. I can't find anywhere this information.

The MSI FX5950 Ultra uses 2.0 ns DDR memory, and the MSI FX5900 Ultra uses 2.2 ns Hynix DDR memory chips.
The H2O Guru
If You Build The Circuit The Electrons Will Come!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Drivers v3.13
nVidia VGA Drivers v53.03

MSI 5900 ultra

can i have the latest FX5950 Ultra-VTD256 bios please i want to try something...

Quote
Originally posted by urosov
I have flashed the Asus FX 5900 (non ultra) to FX 5950 Ultra (Gainward bios) and i have 100% with 2 of 2 cards! I have also succesfuly flashed the MSI FX5900 Ultra, non ultra, SP and FX version of the cards wich all of them were running 3dmark 03 for 9 hours now. I can confirm that you get a temp drop of about 8°C on all cards! This mod is simply fantastic!!!
Gigabyte FX works also (tested)
Asus FX 5900 works
MSI FX's work
this guy claims it works with the gainward bios so i assumed an msi bios would suit me better, also it is supposed to raise vcore on ur card and lower your temps, im hoping to get lower temps since mine seems to heat up alot... plz can i have it pretty plz? oh go on glenn i can see ur 5950 in ur sig! :P

MSI 5900 Ultra bios mod help!!!

Has anyone else with the 5900U tried flashing to 5950u? I have tried using MSI 5950U bios but found it "flickered" too much for my liking and now am back to original bios.
I would like to hear fellow MSI users opinions on this particular card and what kind of experiences you've had with the bios flash.
Ultimately I would like to flash my card to a 5950U but would like to hear more opinions with MSI cards before I try again.
All help is greatly appreciated.

hi,
See H20 reply about ram speed.
Your guess could be right.
The temp is lower. When you autodetect for speed adjustment, it gets lower speed reflecting its 5900 root (maybe hardware control/lock), but still higher than I can oc the 5900. At default it is 475/950. Manual adjustment reach 503/1.02g, but not stable.
Maybe new nVidia driver can help.
There is another site, http://www.mvktech.net that you may have visited, where there are alternate msiBios (probably the same though). Seems rev2 works for people on some forum.
Notice that not many msiUsers here are onto this topic. Any guesses? Restrictions?

MSI NBox 5900 Ultra wont work at 8x AGP

I recently bought a MSI 5900 Ultra 256 in the NBox package. I installed it and loaded the latest drivers and began playing DAOC. It was great for half an hour then it locked up. I also had an issue where my refresh rates were really bad and it was drawing like one frame every 10 seconds.
I rebooted the pc and turned off 8x agp. Botted it back up and played for the rest of the evening.
I just put in a new 500 watt PS with a 32A 12 v rating, so I would hope the PS isnt at fault. I also had recently cleaned all my nvidia drivers off the machine as I had installed an ATI 9600xt.
Please help.
I already spent a week working on an XFX 5900 ultra that I ended up sending back, I dont want do that again. Also, I have noticed a number of other folks here who have had the same issue.

I have the latest bios and drivers on my pc. I am not too sure what the grease has to do with it not working in 8x mode. I am not real sure what the 3.3 and 5v Amps are actually. The image on the website is very blurry. I looked up a review and found this information:
3.3v 28 A
5v 30 A
3.3v / 5.0v Combined Load - 200W
3.3v / 5.0v / 12.0v Combined Load - 480W
The review was found here:
http://www.systemcooling.com/modules.php?name=News&file=article&sid=1371
I am going to try a full whip and reload of my machine. If this doesn't work I guess I will return the card and go ATI from here on out.
Could this have something to do with the fact that the motherboard is an nvidia chipset? Do MSI mother boards have issues running nvidia FX cards?

MSI FX 5900 ultra or PowerColor 9800 Pro

Hi
I have the following system but I am stuck with the Graphic.
Intel Pentium 4 'Northwood' 3.0CGHz (800FSB)
MSI 875P Neo-FIS2R
Corsair 1GB DDR XMS3700 TwinX (2x512MB) Platinum CAS3
LiteON LTN-525(S) 52x CD-ROM
Sony CRX220A 52x24x52x CDRW IDE
Pioneer DVD-120 Tray Load
Seagate Barracuda Serial ATA V 120GB
Thermaltake Xaser III V2000A Aluminium Super Tower
Antec TrueBlue 480W PSU
Creative Audigy 2
WIN XP PRO
My ? is which graphic card shall i buy MSI 5900 ultra or PowerColor 9800 Pro with 256 MB???
Thanks. ?(

ATI is supposed to have better picture quality and better AA quality, but most reviews admit it's a pretty close call.

Call to Driver Package Error - Nine Possible Solutions that have Resolved this Issue!

Hello everyone I've decided to write up this guide to discuss and troubleshoot the “Call to Driver Package Error”.
What is it ? What causes it?
This issue normally occurs when a specific driver, that is being called, cannot be called. Sometimes, a 1627 or 1603 error is referenced in the error.
- If a 1603 error is referenced, this indicates that an ERROR_INSTALL_FAILURE has occurred, meaning a component of the installation failed. This is normally accompanied when another form of installation occurs.
- If a 1627 error is referenced, this indicates that an ERROR_FUNCTION_FAILURE has occurred, meaning a function at a specific moment has failed, and the installation cannot continue.
Typically, these numbers do not mean a whole lot. However, for an advanced user, these numbers might mean a little bit more.
An example?
"Call to driver package install returned the error 1603 for Pkg C:/ProgramFiles\HP\HP officejet pro 8600\driverstore\ng scan driver\HPWia_OJ8600.INF"
This is the most recent error message I've witnessed. If you break it down, you will notice that “HPWia_OJ8600.INF” is the installation file (INF) that has failed. WIA (Windows Image Acquisition) is crucial for scanning, and the printer installs this file to enable scanning features.
How can you troubleshoot this error?
This is the main portion of the post. I am going to suggest a significant list of troubleshooting that you can attempt. There are nine solutions which have resolved the issue in different situations, all of which I personally worked with. I'm hoping that these solutions will work for you if you have to face this error.
*Please note that some of this troubleshooting is a little complicated. If a mistake is made, you may have to reinstall the operating system. However, the final troubleshooting step will require you to do this. You should make sure all of your data is backed up before troubleshooting.
Backing Up Your Files (Windows 8)
Backing Up Your Files (Windows 7)
How to Back Up Your Files (Windows Vista or XP)
You should also backup the Registry. There are some Registry-editing steps in the troubleshooting I provide.
Backing Up, Editing, and Restoring the Windows Registry (Windows 8)
Backing Up, Editing, and Restoring the Windows Registry (Windows 7)
Backing Up, Editing, and Restoring the Windows Registry (Windows 98, ME, and XP)
*After each step is attempted, you can try installing the printer software. If it fails, please uninstall the software before proceeding. This HP document will explain how to do it:
1. The first step is performing a Clean Boot. I've resolved this issue in the past by performing this simple step before installing the software. A Clean Boot will turn off third-party programs and services that could be blocking the software from working correctly. For more information on how to do this, please look at this Microsoft document:
How to perform a clean boot in Windows
2. Next, make sure the Windows Installer it turned on and started. If it not, the installation may not complete. To do this, hold down the “Windows” and “R” key on the keyboard, which will open the Run box. In that box, type “services.msc” (without the quotes) and hit Enter.
Now scroll down to the Windows Installer. If it is checked stopped, or not started, right-click on it and select “Start”.
3. Next, I would suggest completing all Windows Updates:
a) Open "Windows Update" in Control Panel.
b) Click "Settings", and then click "Install optional updates".
c) Next, click "Check for updates".
This will ensure that all updates are found and installed. Once they are installed, see whether or not the error returns.
4. If the issue is not resolved at this point, I would like to check the system for obvious corruption with an SFC scan. SFC stands for System File Checker, and it scans and attempts to restore corrupted Windows files.
To do this, open Command Prompt as Administrator. Type in this command and hit Enter afterward: sfc
/scannow
Write down the results and restart computer after this completes.
5. Creating a new Administrator account is a workaround to the issue. If the error does not appear on other accounts, this proves that whatever is causing the error is account-exclusive. I'm going to suggest you unlock the computer's built-in Administrator account.
To do this, open Command Prompt as Administrator, again. Then type in this command and hit Enter afterward: net user administrator /active:yes
6. The next step involves editing permissions in the Registry. In the Registry, please review the instructions below to apply full permissions to the following key: HKEY_LOCAL_MACHINE
a) Right-click on the key that you need to edit and/or delete (HKEY_LOCAL_MACHINE). Click on "permissions..."
b) Click "Add" in that Window that appears.
c) There will be an empty box under "Enter the object names to select". Type "Administrator" (without the quotes), then click on "Check Names".
d) An Administrator name will appear, click "Ok" when it does.
e) You should be able to select (click) the Administrator profile under "Group or user names". Once clicked, click on "Advanced".
f) Click on the "Owner" tab.
g) Click on the Administrator profile, then put the check-mark in "Replace owner on subcontainers and objects".
h) Go back to the "Permissions" tab, and ensure the Administrator profile is selected.
i) In the "Permissions" tab, put a check-mark in every box available. The boxes will likely be indicated by "Include inheritable permissions from this object's parent" and "Replace all child object permissions with inheritable permissions from this object".
j) Next, click "Edit". Put a check-mark in "Full Control" under Allow. Click Ok. Now, click Apply (you may receive a Window security message, just click "Yes"), then Ok.
k) Exit the Registry, then restart the computer, and launch the Administrator account.
7. The next step is to re-register the Windows Installer, and other dynamic library links (.DLL). Doing this will reference certain components that are required to complete the installation. Open Command Prompt as Administrator, then type each command and hit Enter after each one:
MSIEXEC /UNREGISTER
MSIEXEC /REGSERVER
REGSVR32 MSI.DLL
REGSVR32 ATL.DLL
REGSVR32 SOFTPUB.DLL
REGSVR32 WINTRUST.DLL
REGSVR32 INITPKI.DLL
REGSVR32 DSSENH.DLL
REGSVR32 RSAENH.DLL
REGSVR32 GPKCSP.DLL
REGSVR32 SCCBASE.DLL
REGSVR32 SLBCSP.DLL
REGSVR32 MSSIP32.DLL
REGSVR32 CRYPTDLG.DLL
8. There are certain DLL files that can interfere with the installation, and they should be deleted. Go to C:\Windows\System32
Delete the following files:
HPZipm12.dll
HPZinw12.dll
9. Before reinstalling the operating system, you can try restoring it. This will allow you to return the computer to a point where the printer was working.
*You should only do this if the software worked in the recent past.
What is System Restore? - For Windows 7 and Vista
How to refresh, reset, or restore your PC - For Windows 8 and 8.1
What if these nine solutions do not work?
Finally, you will need to reinstall the operating system if the issue is not resolved by this point. However, I can promise that this will resolve the issue. Here is a generic document on reinstalling the operating system:
Overview of Recovering the OS or Reinstalling the Operating System
And that's everything. Thanks for reading! - Mario
I worked on behalf of HP.

No error messages are given. It will either freeze while saying "Accessing iTunes Store," or without saying anything at all.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them eithe

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

How to resolve this issue??

I have given box / borders for cells in the table in smartforms. in main window.
Now when i print with HPlaser the output comes fine.
But when i use Epson - The borders almost print 5 to 6 times bigger & looks to ugly and even the data is not shown. Meaning the data is overshadowed by the borders of the Cells.
Tried to reduce the <b>width</b> in the BOX option of TABLE in smartforms. By default it is 15.00 TW. did not work.
EPSON is what they want to use.
Please let me know how to resolve this issue.
Regards,
Siva

Hi Siva,
Ask them to provide the Diamension of what paper type they
are using for EPSON, becoz U might have kept paper size
as A4 and there they might be using INCH12 or some other size
of paper( not Sure ).So if u can have the Exact paper format that
they are going to use , u can design ur form in that paper format
and then check.
Regards
Avi.....

I am unable to update software or backup my devices. Apple techs unable to resolve the issue after hours of phone support over the course of several months.

I am unable to update software, transfer purchases, sync, or backup any of my 3 devices. I have tried using iTunes on other computers, uninstalling iTunes with tech support walking me through, using a different user on my computer, deleting photos off of my devices, using an ethernet cable instead of connecting with wifi, uninstalling my antivirus software and firewall, and had my laptop examined by several techs who all determined there was nothing wrong with the laptop that explains what has been going on. I am also unable to view or download purchases on iTunes. Clicking the Itunes store results in a blank white screen. I get various error messages, including -9886. Apple techs and now the engineers have been unable to resolve the issues thus far, even after several hours of phone support over the course of several months (about 5 hours this month alone). I have done everything they've suggested, even when they've suggested I do something over again, and I'm becoming frustrated. I would greatly appreciate any advice you can offer. Thank you in advance for your time.

Hi there
Sorry for hijacking your thread as put by Dahveed. However I have resolved my issue so I thought I'll share it with the rest of you.
I checked for the error 3194 in youtube and I found some good videos that tell you how to resolve the problem. The issue I was facing was the actually (I know because I have resolved it now) the communication between my computer and apple server which can be fixed as following (if you are using windows):
There is file in following directory:
C:\Windows/system32/drivers/etc/hosts
The file normally has no extension and it is in file format. You need to open it and make sure that every line that has apple server id starts with "#". In my case one of the line started directly with the ip address and then gs.apple.com.
Perform your restore/update after that and hopefully it should be resolved (mine did).
Cheers

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

Can you please help me how resolved this issue.

Hi Experts
I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
LDAPRC 010 another server is referenced.
Can you please help me how resolved this issue.
With Regards,
Trinadh Bokka

You may be able to solve by using
Note 1151329 - Depth of LDAP search is only one level below the base entry
Markus

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

Hey kristiac,
Thanks for the question. If I understand correctly, you have no service on the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't connect to a cellular network or cellular data - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

45.23's Resolved SBA Issue on MSI 5900 Ultra

Similar Messages

Maybe you are looking for