4530s DC CARD or USB BOOT not working even if it has this option in bios

i just posted a message but i think it's in the wrong section..
http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/sd-card-boot-and-usb-boot-not-working/m-p/9...
Hi, i just got a HP ProBook  4530s , I5 processor, Intel HD 3000 , i have a problem with it, i can't boot on any usb or sd card, i tried all linux versions i could find and also some live windows and bartPE, on my sd card i get the "Disk read error" as soon as i choose the booting device and on usb it goes a little bit further i can see the linux logo some processes starting and then same error related to write on disk, the sd card and usb are not in read only mode and on my other laptop a older one 6730s everything works...
Also all the usb and sd card work perfect in windows, when i boot from internal HDD.
Is there a fix for it??  Or can anybody that has this laptop test if it works booting from usb or sd card, maybe it's a problem with this unit..
i have tried all available bios verions and various usb devices but as i said the usb sticks all worked on my other laptop but not on this one.
Oh and also is there a bios option to stop virus check on boot? as far as i could test that is the only option in bios that is not there and i can't test with it ON/OFF.. any help would be apreciated because i can return the laptop for 30 days and i allready have it for one week. and i really need this option to work.
PS - sorry for my bad english but i'm from Europe

Quote from: Svet on 13-May-12, 00:13:31
do >>Clear CMOS Guide<< with power cord removed
Yes, I've tried this. I pulled the power cable, waited two minutes, hit the CMOS button, and also removed the battery, and waited another minute.
After which, I loaded optimized defaults, but the problem remains.
Thanks,
Ice Piq

Similar Messages

  • Lenovo G580(20157​) usb boot not working after windows 8 installati​on

    Hi,
    I have lenovo G580 (20157) model. previously i had installed Windows 7 and Ubuntu 12.04 with no problem. Today i decided to go for windows 8.1. it installed perfectally without any issue ( Legacy mode non UEFI ) and working fine but ubuntu live USB is not booting up, when i select Boot from USB windows 8 starts. I really need Linux in my laptop. Could anybody help ASAP.
    Solved!
    Go to Solution.

      This guide is not System Specific and not all of the option may show inside a certain BIOS version, Just Make sure that all optionlisted here that is available on a Lenovo BIOS is set as follows.
    Ideacentre BIOS Menu is F1 and F2 for Ideapad.
    Under Exit TAB
    OS Optimization
    OS Optimized
    For the two options above:  Should be set as Disabled or Other OS
    Under Boot Tab / Start up Tab
    Boot Mode Should be set to Legacy
    Boot Priority Should be set to Legacy First
    UEFI Boot should be set to Disabled
    Quick Boot should be Disabled
    StartUp device Menu prompt should be Disabled
    Quick Boot Should be Disabled
    USB Boot should be Enabled
    Secure boot Should be Disabled
    Once everything are Set, make sure to save all changed by hitting F10 and Enter for Yes
        After Hitting enter It will Restart and You will have to keep on tapping F12
           this should pull up the Boot Menu letting you select where to boot.
    If not succesful pulling up the boot menu after the restart, Power Drain the System and turn it on while hitting F12 Again.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HT3964 USB port not working even after resetting the SMC and PRAM, what can I do now?

    Hi All,
    I've got the "USB port draining too much energy" error message a couple of weeks ago and since then I've tried many times to reset the PRAM and SMC but still, one of my USB port is not working.
    Could anyone please tell what I can do next ??
    Thanks a lot

    If you live near an apple store make an appointment.  They will perform a DFU restore using known good equipment.
    If that doesn't work you probably have liquid damage.

  • Hey guys, i download premiere pro cc but i can't open it, my BF told me to uninstall the programs and reinstall but its not working even if i do this

    so like you see i try to open the programs but i can't..... what should i do or did anyone else had this problem to?

    Please specify the operating system of your computer .

  • Dual-Boot; Restart and boot other o/s USB devices not working

    I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
    Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
    After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
    System no hang or occur any error/BSOD message.All startup programs run as normal.
    I tried to re-plug usb devices but notting happens...  Still not working
    But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
    After power up PC and boot with windows 7 all usb devices works normaly.
    I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
    I'm sure other H/W is OK, but I thnik this mobo have a fault.

    Thank you for reply.My PC system specs:
    CPU:    Intel Pentium G3258 3.2ghz
    Board:    MSI Z97-G43 /Bios: Ver. V17.7
    MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
    VGA:    Sapphire AMD Redeon HD6670
    CASE:    Zalman z3 plus white (5x 120mm fan)
    PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
    HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
    COOLER:    Akasa 92mm PWM Blue Led
    OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
    O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
    All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
    Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
    I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
    I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
    Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
    I think msi z97-g43 mainbıoard have a problem.

  • I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?, I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?

    I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
    Thanks

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

    After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

    Did you talk to your carrier?

  • Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

    Hello, 
    I currently have  windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions  
    For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM. 
    As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.    
    Using an RDP client( v8.1)  I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs 
    and I can use the device without any issues. 
    However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client)  but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
    Because I have ran all updates the rdp version on the VM is running v8.1.
    Previous to installing the updates USBr still was not working
    I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM : 
    RDP 8.0 -- Enabled
    Configure RFX -- Enabled
    Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
    Many Thanks 
    Brian 

    Hi,
    According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
    Server6: Conversion is not supported in restricted language mode or a Data section.
    Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
    Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
    For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
    Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
    By the way, from Technet:
    You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
    Client Access Permissions
    http://technet.microsoft.com/en-us/library/dd638131.aspx
    Feel free to contact me if there is any problem.
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • I keep trying to set up a new Apple ID but apparently my card info is not working. how do i fix this? "contact ituunes support to complete this transaction"

    i keep trying to set up a new Apple ID but apparently my card info is not working. how do i fix this? "contact ituunes support to complete this transaction"

    If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

  • HT1379 The USB ports on my 30" Cinema are not working.  The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks.  I need to move the computer between two locations, and the other monitor is a 27"

    The USB ports on my 30" Cinema HD display appear to not work.  The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display.  Now I need to move the computer back and forth between two locations using the two displays.  The need for operating USB ports is essential.  Any ideas.  The display appears entirely normal.  Am running OS X 10.9.

    Disregard, problem solved.

  • SA30 USB do not work after reinstall, please help!!

    Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
    I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.

    When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
    This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
    Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
    Bye Hans

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • USB flashdrive not working since upgrading to Yosemite

    I have upgraded to Yosemite and my USB stick (Kingston) now does not work at all. Has anyone got any solutions. Im totally gutted!

    Just got the same problem after Yosemite installation. Spent 1 hour with Apple Care over the phone. My USB keyboard (Apple) was not working at all on both ports. After multiple tries with Apple Care support, even with one of their technical supervisor, no solution...I was about to re-install everything.
    Finally, digging a little bit in other Forums, I've found "the solution" which was: connect the Apple keyboard with the USB extension cable (left in the box because useless)...
    Don't ask me why it's working but now it's working.
    Dear Apple Care technician, please take that tip as a personal gift

  • I have an Ipod Touch, it appears inactive and says conect to Itunes. When I connect it to the PC, the PC says "USB device not working". How can do to solve this problem.

    I have an Ipod Touch, it appears inactive and says "connect to Itunes". When I connect to the PC, the PC says "USB device not working". How could do to solve this problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • HT204053 I tried to make a purchase with my apple id after changing the experiration date on my credit card and it does not work

    I tried to make a purchase from the app store ( the French app store using my French apple ID and credit card) , i had just changed the experition date for my credit card and it did not work, should I do anything else?
    Thanks

    Then you should contact them:
    http://www.apple.com/emea/support/itunes/contact.html

Maybe you are looking for

  • Viewing SRM Purchase Order Vendor Text in SAP

    When looking at purchase orders using SAP transaction ME23N I can see the short text created for purchase orders. I would like to be able to access the data from the SRM Vendor Text field as this usually contains more useful information. I have tried

  • Help with escape option in sql

    SQL> select sname from shares where sname like 'VIS_%'; SNAME VISAKAIND VISASTEEL VISESHINFO VISHALEXPO VISHALRET VISUINTL VIS_SIN 7 rows selected. SQL> select sname from shares where sname like 'VIS\_%'; SNAME VISAKAIND VISASTEEL VISESHINFO VISHALEX

  • In Failover Cluster 2008 mailbox2 server network status Unavailable (down).

    Hi  I am new here, & hope i can get some help for the below issue let me keep it simple scenario  i have 2 mailbox server ( mbx01 & mbx02) 2 cashub Server ( cshb1-cshb2) all running on hyper-v. last week due to some maintenance in data center i have

  • Oracle Installation with out GUI?

    we got new Solaris box and we don't have Sun Monitor. So, we are using telnet sessions to connect. Now we need install Oracle 9i/10g on the box. Is Universal installer require X-Windows ?? Is it possible to install from Command line prompt? If Yes --

  • Why won't my i phone 4 play songs in itunes radio

    I can open itunes radio and choose a station but the song won't play.  the play icon is there and when i touch it it goes to pause and instantly back to play.  Have signed on with my husbands itunes password this does not work either. help please