46C- ECC6 upgrade with EHP4 SAP_BASIS package not found

We are executing an upgrade from 46C to ECC6 SR3 and binding in EHP4.
We have successfully downloaded EHP4 using Solution Manager MOPZ and
provided the generated "XML" file during the PREPARE.
During the phase EHP_INCLUSION, PREPARE is stopping with a message "No
matching SAINT package for 'SAP_BASIS' found".
The KB70102.SAR and KB70103.SAR packages from EHP4 have definitely been unpacked
and are available in /usr/sap/trans/EPS/in and we have prompted PREPARE to search EPS/in but it just returns to the previous error after searching.
It appears from the logs that the upgrade is expecting a "SAINT"
install package for SAP_BASIS and does not consider the KB70102/3
patches as acceptable?
Any clues as to why PREPARE is not accepting the SAP_BASIS packages and looking for a SAINT install?
Below is an excerpt from the EHP_INCLUSION.LOG
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_BASIS' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399      current: name = 'SAP_BASIS', release = '700'
4 ETQ399      patch type = 'U', ncvers-component = 'SAP_BASIS'
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
Regards,
Mike Tarr

Ok, I was able to download the K-701DHINSAPBASIS package from Service Marketplace and this resolved the SAP_BASIS problem. Thank you Markus for this solution.
I also downloaded the SAP_ABA, SAP_BW, and the PI_BASIS components and unpacked those as well in /usr/sap/trans/EPS/in.    My upgrade is now stuck asking for a SAINT package for SAP_ABA! I'm sure the SAP_ABA install, K-701DHINSAPABA, is unpacked and available in /usr/sap/trans/EPS/in.
The SAP_ABA files are definitely readable and there are entries in table PAT03_SDA for them.
I have a ticket open with SAP support but they have not had a solution yet for the SAP_ABA
Solution Manager failed to identify any of these packages as required in MOPZ.
I'm starting to wonder if anybody has ever done a 4.6C to ECC6 upgrade with EHP4 bound before?
Any ideas on the SAP_ABA would be appreciated. Here's a section of the EHP_INCLUSION.LOG file from PREPARE.
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BASIS', release = '701', package = 'SAPK-701DHINSAPBASIS'
4 ETQ399 ... Matching package found: 'SAP_BASIS','701','SAPK-701DHINSAPBASIS'
4 ETQ399 (trc) R3upPatchDisassembleQueue: 1 package queue entries
4 ETQ399 (trc) R3upPatchDisassembleQueue: force=NO
4 ETQ399 (trc) R3upPatchDisassembleQueue: 0 packages will be disassembled
4 ETQ399 ... ... INST/UPG SAINT decision ok
4 ETQ399 ... EhP component SAP_ABA, 701
4 ETQ399 Looking for SAINT package for 'SAP_ABA' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399      current: name = 'SAP_ABA', release = '700'
4 ETQ399      patch type = 'U', ncvers-component = 'SAP_ABA'
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
4 ETQ010 Date & Time: 20090511150018

Similar Messages

Build & Capture TS (MDT) - Capture fails at PrepareOS (sysprep) with "Boot Image package not found"

Hi all,
I'm searching for a while on this one now... I'm unable to perform a "ZeroTouch" Build & Capture of my reference machine to get a master image, with Capture Media it seems to be working, but this is a manual step...
While running a W7SP1 Build & Capture task sequence, the "Capture the reference machine" group fails at "PrepareOS". The step before "PrepareOS", "Prepare ConfigMgr Client" runs without any issues.
The only error I can find, shows up in the report "OSD - history of a TS":
... 0005 that is either already released or we have not connected to it.
BootImage::ResolveImageSource( pszPackageId, sImagePackageSourcePath, sImageSourcePath), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\bootimage.cpp,732)
TS::Boot::BootImage::StageBootImage(sPkgID), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,917)
PreStageWINPE(m_bDebug), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,1363)
pCmd->Sysprep(bActivate, bMsd), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\main.cpp,270)
De-Initialization successful
Exiting with error code 2
sending with winhttp failed; 80072ee2
SendResourceRequest() failed. 80072ee2
Download() failed. 80072ee2.
Boot Image package not found.
he system cannot find the file specified. (Error: 80070002; Source: Windows)
Failed to pre-stage WINPE image, hr=0x80070002
Unable to sysprep the machine, hr=80070002
Sysprep'ing the machine failed, hr=80070002
I've searched the smsts.log file hundreds of times for errors, nothing there...
Can anyone give me a clue or just something...? I really don't know what my next step, to make this work, could be...
Thanks!

The error Torsten pointed out gave me some clue... After much digging around on the web, I've stumbled upon this
article which led me into adding the following TS-variables:
SMSTSDownloadRetryCount: 5
SMSTSDownloadRetryDelay: 15
It seems to be working now on all types of hardware...
Case closed, thank you for the assistance!
Let's hope this article can save someone a couple of days... :)
Wesley

Newbie help with SAX, jclark package not found

I'm trying do a simple SAX exercise. My work files are on my d:\workspace\xml directory and I'm running win2k pro. I have extracted saxjava-1.0.zip to e:\XML\sax, the jdk to e:\j2sdk1.4.0, and james clark xp parser to e:\XML\xp
I have set my environment variables according to the book
variable: CLASSPATH
value: .;E:\XML\sax;E:\XML\xp\xp.jar
when I compile my java file I get the error:
package com.jclark.xml.sax does not exist
Parser parserObj = new com.jclark.xml.sax.Driver();
Note: BandReader.java uses or overrides a deprecated API
Note: Recompile with -deprecated for details
1 error
When I go into the directory E:\XML\xp\com\jclark\xml\sax , the file "Driver.java" is there
code in my BandReader.java file
import org.xml.sax.*;
public class BandReader extends HandlerBase {
     public static void main(String[] args) throws Exception {
          System.out.println("Here we go...");
          BandReader readerObj = new BandReader();
          readerObj.read();
     public void read () throws Exception {
          Parser parserObj = new com.jclark.xml.sax.Driver();
          parserObj.setDocumentHandler (this);
          parserObj.parse ("file:///d:/workspace/xml/bands.xml");
     public void startDocument() throws SAXException {
          System.out.println("Starting...");
     public void endDocument() throws SAXException {
          System.out.println("...Finished");
     public void startElement(String name, AttributeList atts) throws SAXException {
          System.out.println("Element is " + name);
}

I downloaded sun's java_xml_pack-summer-02_01 and extracted the contents to e:\xml\sun and have changed my classpath environment variable to E:\XML\sun\jaxp-1.2_01:e:\XML\xp\xp.jar
How would I change my code for my exercise to work? I tried the following and I get 4 errors.
import java.io.*;
import org.xml.sax.*;
import org.xml.sax.helpers.DefaultHandler;
import javax.xml.parsers.SAXParserFactory;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.parsers.SAXParser;
public class BandReader extends ContentHandler {
     public static void main(String[] args) throws Exception {
          System.out.println("Here we go...");
          //BandReader readerObj = new BandReader();
          //readerObj.read();
          //Use an instance of ourselves as the SAX event handler
             DefaultHandler handler = new BandReader();
          //Use the default (non-validating) parser
             SAXParserFactory factory = SAXParserFactory.newInstance();
     public void read () throws Exception {
          //Parse the input
             SAXParser parserObj = factory.newSAXParser();
          parserObj.setDocumentHandler (this);
          //Parser parserObj = new com.jclark.xml.sax.Driver();
          //parserObj.setDocumentHandler (this);
          parserObj.parse ("file:///d:/workspace/xml/bands.xml");
     public void startDocument() throws SAXException {
          System.out.println("Starting...");
     public void endDocument() throws SAXException {
          System.out.println("...Finished");
     public void startElement(String name, AttributeList atts) throws SAXException {
          System.out.println("Element is " + name);
}

Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008

Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay Kumar

Hi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Problems with Sun One Web Server 6.1 javax.xml.xpath package not found

I used myeclipse to build an xml app and tested on jboss. it worked perfectly. However when i deployed it to our solaris sun one web server the app fell apart completely with the following error. I m unable to figure out what went wrong. Any help will be much appreciated.
Thanks.
[11/Dec/2007:22:12:37] failure (13539):      for host 121.247.233.169 trying to GET /feeds/rss.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
     org.apache.jasper.JasperException: WEB4000: Unable to compile class for JSP
     /opt/SUNWwbsvr/test/ClassCache/test/_jsps/_feeds/_rss_jsp.java:8: package javax.xml.xpath does not exist
     import javax.xml.xpath.*;
     ^

Thanks for the response. I tried to use xalan package which resolved the javax.xml.xpath package not found error (xalan.jar in WEB-INF/lib folder). However I m now getting the following error. Probably incompatible version is the reason. Please advise!
[11/Dec/2007:23:46:28] failure (17028):      for host 121.247.233.169 trying to GET /feeds/rss.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
     javax.servlet.ServletException: org.apache.xpath.XPathContext.<init>(Z)V
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:536)
     at _jsps._feeds._rss_jsp._jspService(_rss_new_jsp.java:627)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
     ----- Root Cause -----
     java.lang.NoSuchMethodError: org.apache.xpath.XPathContext.<init>(Z)V
     at org.apache.xpath.jaxp.XPathImpl.eval(XPathImpl.java:207)
     at org.apache.xpath.jaxp.XPathImpl.evaluate(XPathImpl.java:281)
     at _jsps._feeds._rss_new_jsp._jspService(_rss_jsp.java:165)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)

Jar not running is sarge and apache-ant shows error of package not found

Hello,
First of all I am not a java programmer. I work in C/C++/C#.
Currently I am dealing a game written in java (1.5) using netbeans 5.5.0 under windows xp. My target is to compile in my development machine and run in the clients machine. everything works fine in windows xp. I open the netbeans ide, load the necessary class libraries, build the project and run it. it runs without any problem.
The problem begins when I run the same project from linux (fedora). it doest not run. It shows some error.
<error platform="fedora 7">
Exception in thread "AWT-EventQueue-0" java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:159)
at java.awt.Window.<init>(Window.java:406)
at java.awt.Frame.<init>(Frame.java:402)
at java.awt.Frame.<init>(Frame.java:367)
at javax.swing.JFrame.<init>(JFrame.java:163)
at netbeansapplication.nbApplication.<init>(nbApplication.java:52)
at netbeansapplication.nbApplication$14.run(nbApplication.java:453)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
</error>
Some of these error were resolved when I set the DISPLAY variable (export DISPLAY="127.0.0.1:0") but the other errors were still there.
But when I open this same project in netbeans and resolve the dependencies with class libraries it works ok after compiling.
I can run it from console (java -jar ...)
And again the same source tree shows the following error when I am in windows !!! (by java -jar ... command)
<error platform="WinXPSP2">
Exception in thread "AWT-EventQueue-0" java.lang.NumberFormatException: For input string: ""
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:468)
at java.lang.Integer.parseInt(Integer.java:497)
at cherrygame.global.readConfigForStickProtection(global.java:2060)
at cherrygame.nbCherryGame.<init>(nbCherryGame.java:243)
at netbeansapplication.nbApplication.<init>(nbApplication.java:46)
at netbeansapplication.nbApplication$14.run(nbApplication.java:453)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
</error>
I see that netbeans uses ant to compile project in the background.
then I tried using ant to compile.
doing only `#ant compile` where build.xml resides does the compilation.
after that I try to run it (by java -jar ...). again the above error shows up.
What would I do?
If I compile it with netbeans in machine A then it runs well in A but not in machine B.
If I compile it with ANT in machine A then it doesn't run in A, no chance for machine B.
the contents of my build xml is here
<code file="build.xml">
<![CDATA[
<?xml version="1.0" encoding="UTF-8"?>



<project name="NetBeansApplication" default="default" basedir=".">
<description>Builds, tests, and runs the project NetBeansApplication.</description>
<import file="nbproject/build-impl.xml"/>

<target name="-post-jar">
<jar update="true" destfile="${dist.jar}">
<zipfileset src="${libs.swing-layout.classpath}"/>
<zipfileset src="${libs.addMoney.classpath}"/>
<zipfileset src="${libs.NormalWindow.classpath}"/>
</jar>
</target>
</project>
]]>
</code>
my directory contents is here. note. I have 2 packages "cgwindow2" and "NormalWindow" for class libraries and my main application is "CherryGame". The game is "game.jar" in the CherryGame folder.
<listing foldername="CherryGame">
D:\src\java\CherryGame\build.xml
D:\src\java\CherryGame\BW.txt
D:\src\java\CherryGame\config.txt
D:\src\java\CherryGame\config.txt.lin
D:\src\java\CherryGame\flopsfile.txt
D:\src\java\CherryGame\game.jar
D:\src\java\CherryGame\LWMoneyfile.txt
D:\src\java\CherryGame\mfile.txt
D:\src\java\CherryGame\mfile2.txt
D:\src\java\CherryGame\mfile3.txt
D:\src\java\CherryGame\TotalRollsTillBigWin.txt
D:\src\java\CherryGame\UserFile.txt
D:\src\java\CherryGame\build\classes\cherrygame\addMoneyFrame.class
D:\src\java\CherryGame\build\classes\cherrygame\addMoneyPanel.class
D:\src\java\CherryGame\build\classes\cherrygame\cardsPanel.class
D:\src\java\CherryGame\build\classes\cherrygame\cardsWindow$1.class
D:\src\java\CherryGame\build\classes\cherrygame\cardsWindow.class
D:\src\java\CherryGame\build\classes\cherrygame\cherryGameBackPanel.class
D:\src\java\CherryGame\build\classes\cherrygame\cherryWindow.class
D:\src\java\CherryGame\build\classes\cherrygame\customBorderCherryGame.class
D:\src\java\CherryGame\build\classes\cherrygame\FixedGlassPane.class
D:\src\java\CherryGame\build\classes\cherrygame\global.class
D:\src\java\CherryGame\build\classes\cherrygame\helpPanelOne.class
D:\src\java\CherryGame\build\classes\cherrygame\imagesPanel.class
D:\src\java\CherryGame\build\classes\cherrygame\messageWindow.class
D:\src\java\CherryGame\build\classes\cherrygame\messageWindow2.class
D:\src\java\CherryGame\build\classes\cherrygame\messageWindow3.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$1.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$10.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$11.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$12.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$13.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$14.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$15.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$16.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$17.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$18.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$19.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$2.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$20.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$21.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$22.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$23.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$24.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$25.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$26.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$27.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$28$1.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$28$2.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$28.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$29.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$3.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$30.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$31.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$32.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$33.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$34.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$35.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$36.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$37.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$38.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$39.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$4.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$40.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$41.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$42.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$43.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$44.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$45.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$46.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$5.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$6.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$7.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$8.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$9.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame$MyTask.class
D:\src\java\CherryGame\build\classes\cherrygame\nbCherryGame.class
D:\src\java\CherryGame\build\classes\cherrygame\panelMessage.class
D:\src\java\CherryGame\build\classes\cherrygame\panelMessage2.class
D:\src\java\CherryGame\build\classes\cherrygame\panelMessage3.class
D:\src\java\CherryGame\build\classes\lpt\LPT.class
D:\src\java\CherryGame\build\classes\lpt\events\Events.class
D:\src\java\CherryGame\build\classes\lpt\events\LPTEvent.class
D:\src\java\CherryGame\build\classes\lpt\events\LPTEventListener.class
D:\src\java\CherryGame\build\classes\lpt\ieee1284\PPParallelPort.class
D:\src\java\CherryGame\build\classes\netbeansapplication\customBorder.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$1.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$10.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$11.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$12.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$13.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$14.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$2.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$3.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$4.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$5.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$6.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$7.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$8.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication$9.class
D:\src\java\CherryGame\build\classes\netbeansapplication\nbApplication.class
D:\src\java\CherryGame\dist\NetBeansApplication.jar
D:\src\java\CherryGame\dist\javadoc\package-list
D:\src\java\CherryGame\dist\javadoc\stylesheet.css
D:\src\java\CherryGame\dist\javadoc\resources\inherit.gif
D:\src\java\CherryGame\nbproject\build-impl.xml
D:\src\java\CherryGame\nbproject\genfiles.properties
D:\src\java\CherryGame\nbproject\project.properties
D:\src\java\CherryGame\nbproject\project.xml
D:\src\java\CherryGame\nbproject\private\private.properties
D:\src\java\CherryGame\nbproject\private\private.xml
D:\src\java\CherryGame\src\customBorder.java
D:\src\java\CherryGame\src\nbApplication.form
D:\src\java\CherryGame\src\nbApplication.java
D:\src\java\CherryGame\src\cherrygame\addMoneyFrame.form
D:\src\java\CherryGame\src\cherrygame\addMoneyFrame.java
D:\src\java\CherryGame\src\cherrygame\addMoneyPanel.form
D:\src\java\CherryGame\src\cherrygame\addMoneyPanel.java
D:\src\java\CherryGame\src\cherrygame\cardsPanel.java
D:\src\java\CherryGame\src\cherrygame\cardsWindow.form
D:\src\java\CherryGame\src\cherrygame\cardsWindow.java
D:\src\java\CherryGame\src\cherrygame\cherryGameBackPanel.form
D:\src\java\CherryGame\src\cherrygame\cherryGameBackPanel.java
D:\src\java\CherryGame\src\cherrygame\cherryWindow.java
D:\src\java\CherryGame\src\cherrygame\customBorderCherryGame.java
D:\src\java\CherryGame\src\cherrygame\global.java
D:\src\java\CherryGame\src\cherrygame\helpPanelOne.form
D:\src\java\CherryGame\src\cherrygame\helpPanelOne.java
D:\src\java\CherryGame\src\cherrygame\imagesPanel.java
D:\src\java\CherryGame\src\cherrygame\messageWindow.form
D:\src\java\CherryGame\src\cherrygame\messageWindow.java
D:\src\java\CherryGame\src\cherrygame\messageWindow2.form
D:\src\java\CherryGame\src\cherrygame\messageWindow2.java
D:\src\java\CherryGame\src\cherrygame\messageWindow3.form
D:\src\java\CherryGame\src\cherrygame\messageWindow3.java
D:\src\java\CherryGame\src\cherrygame\nbCherryGame.form
D:\src\java\CherryGame\src\cherrygame\nbCherryGame.java
D:\src\java\CherryGame\src\cherrygame\panelMessage.form
D:\src\java\CherryGame\src\cherrygame\panelMessage.java
D:\src\java\CherryGame\src\cherrygame\panelMessage2.form
D:\src\java\CherryGame\src\cherrygame\panelMessage2.java
D:\src\java\CherryGame\src\cherrygame\panelMessage3.form
D:\src\java\CherryGame\src\cherrygame\panelMessage3.java
D:\src\java\CherryGame\src\lpt\LPT.java
D:\src\java\CherryGame\src\lpt\events\Events.java
D:\src\java\CherryGame\src\lpt\events\LPTEvent.java
D:\src\java\CherryGame\src\lpt\events\LPTEventListener.java
D:\src\java\CherryGame\src\lpt\ieee1284\PPParallelPort.java
</listing>
<listing foldername="NormalWindow">
D:\src\java\NormalWindow\build.xml
D:\src\java\NormalWindow\manifest.mf
D:\src\java\NormalWindow\build\classes\normalwindow\global.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$1.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$10.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$11.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$12.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$13.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$14.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$15.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$16.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$17.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$2.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$3.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$4.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$5.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$6.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$7.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$8.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow$9.class
D:\src\java\NormalWindow\build\classes\normalwindow\NormalWindow.class
D:\src\java\NormalWindow\build\classes\normalwindow\PasswordDialog$1.class
D:\src\java\NormalWindow\build\classes\normalwindow\PasswordDialog$2.class
D:\src\java\NormalWindow\build\classes\normalwindow\PasswordDialog$3.class
D:\src\java\NormalWindow\build\classes\normalwindow\PasswordDialog$4.class
D:\src\java\NormalWindow\build\classes\normalwindow\PasswordDialog$5.class
D:\src\java\NormalWindow\build\classes\normalwindow\PasswordDialog.class
D:\src\java\NormalWindow\dist\NormalWindow.jar
D:\src\java\NormalWindow\dist\README.TXT
D:\src\java\NormalWindow\dist\_normalwindow.jar
D:\src\java\NormalWindow\dist\lib\swing-layout-1.0.jar
D:\src\java\NormalWindow\nbproject\build-impl.xml
D:\src\java\NormalWindow\nbproject\genfiles.properties
D:\src\java\NormalWindow\nbproject\project.properties
D:\src\java\NormalWindow\nbproject\project.xml
D:\src\java\NormalWindow\nbproject\private\private.properties
D:\src\java\NormalWindow\nbproject\private\private.xml
D:\src\java\NormalWindow\src\normalwindow\global.java
D:\src\java\NormalWindow\src\normalwindow\NormalWindow.form
D:\src\java\NormalWindow\src\normalwindow\NormalWindow.java
D:\src\java\NormalWindow\src\normalwindow\PasswordDialog.form
D:\src\java\NormalWindow\src\normalwindow\PasswordDialog.java
</listing>
<listing foldername="cgwindow2">
D:\src\java\cgwindow2\build.xml
D:\src\java\cgwindow2\manifest.mf
D:\src\java\cgwindow2\mfile.txt
D:\src\java\cgwindow2\UserFile.txt
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyPanel.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$1.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$10.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$11.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$12.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$13.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$14.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$2.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$3.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$4.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$5.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$6.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$7.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$8.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow$9.class
D:\src\java\cgwindow2\build\classes\addmoney\addMoneyWindow.class
D:\src\java\cgwindow2\build\classes\addmoney\customBorderForAddMoneyWindow.class
D:\src\java\cgwindow2\build\classes\addmoney\global.class
D:\src\java\cgwindow2\dist\cgwindow2.jar
D:\src\java\cgwindow2\dist\README.TXT
D:\src\java\cgwindow2\dist\lib\swing-layout-1.0.jar
D:\src\java\cgwindow2\nbproject\build-impl.xml
D:\src\java\cgwindow2\nbproject\genfiles.properties
D:\src\java\cgwindow2\nbproject\jax-ws.xml
D:\src\java\cgwindow2\nbproject\project.properties
D:\src\java\cgwindow2\nbproject\project.xml
D:\src\java\cgwindow2\nbproject\private\private.properties
D:\src\java\cgwindow2\nbproject\private\private.xml
D:\src\java\cgwindow2\src\addmoney\addMoneyPanel.form
D:\src\java\cgwindow2\src\addmoney\addMoneyPanel.java
D:\src\java\cgwindow2\src\addmoney\addMoneyWindow.form
D:\src\java\cgwindow2\src\addmoney\addMoneyWindow.java
D:\src\java\cgwindow2\src\addmoney\customBorderForAddMoneyWindow.java
D:\src\java\cgwindow2\src\addmoney\global.java
</listing>
About my thread subject, my clients machine is a debian sarge 3.0 and when I compiled it there with ANT It says, "normalwindow" package not found. other 2 errors were due to "normalwindow".
Edited by: mokaddim on Sep 12, 2007 2:08 PM

Julio.Faerman wrote:
Hello,
I am trying to run my annotation processor using ant.
I already built the processor, the javax.annotation.processor.Processor file is in the correct place with the correct content.
The jar with the processor is in the classpath (i can see it in ant -v), but it does not process my classes. in fact, i get the warning:
warning: Annotation processing without compilation requested but no processors were found.Do i have to specify -processor or -processorpath or can i just leave it to the default classpath scanning?When -processor is not given, a service loader is used to find the annotation processors (if any). In addition to the class files of the process, to allow your processor to be found as a service, make sure you've also provided the needed META-INF data in the jar file. The general service file format is described in
http://java.sun.com/javase/6/docs/api/java/util/ServiceLoader.html
That said, I'd recommend setting an explicit processor path separate from your general classpath.

Package not found in import

Hello, I�m trying to run a webapplication but I get an Error 500-message in the browser(IE 5): Package not found in import. It is an webapplication with JSPs and an controlling servlet. Does anyone know how to fix that problem?
Using: Windows 2000, Tomcat 3.2.1 as NT-service, JavaTM 2 SDK, Enterprise Edition, JavaTM 2 SDK, Standard Edition
Tomcat/webapps/projektverwaltung.war
Error: 500
Location: /projektverwaltung/projektverwaltung/JSP/Menue.jsp
Internal Servlet Error:
org.apache.jasper.JasperException: Unable to compile class for JSPC:\Tomcat\work\localhost_8080%2Fprojektverwaltung\_0002fprojektverwaltung_0002fJSP_0002fMenue_0002ejspMenue_jsp_0.java:15: Package de.zebulon.projektverwaltung.projekttool not found in import.
import de.zebulon.projektverwaltung.projekttool.*;
^
1 error
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:254)
     at org.apache.jasper.servlet.JspServlet.doLoadJSP(JspServlet.java:462)
     at org.apache.jasper.servlet.JasperLoader12.loadJSP(JasperLoader12.java:146)
     at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:433)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:152)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:164)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:318)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:391)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:404)
     at org.apache.tomcat.core.Handler.service(Handler.java:286)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:797)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:743)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:210)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:498)
     at java.lang.Thread.run(Thread.java:484)
CLASSPATH: .;C:\;C:\jesdkee1.3\lib\j2ee.jar;C:\jdk1.3.0_01\lib\tools.jar;C:\Tomcat\lib\servlet.jar;C:\de\zebulon\projektverwaltung\projekttool;
J2EE_CLASSPATH:
C:\mysql\JDBC_MySQL_mm\mm.mysql-2.0.4-bin.jar;C:\mysql\JDBC_MySQL_Resin\caucho-jdbc-mysql-0.2.2.jar;C:\mysql\JDBC_MySQL_twz\twz1\jdbc\mysql\htdocs\twz1jdbcForMysql.jar;
J2EE_HOME:
C:\j2sdkee1.3;
JAVA_HOME:
C:\jdk1.3.0_01;
TOMCAT_HOME:
C:\tomcat;
Path:
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;C:\PROGRA~1\Borland\Delphi5\Bin;C:\PROGRA~1\BORLAND\CBUILD~1\BIN;C:\PERL\BIN;"%PATH%";%SYSTEMROOT%;%SYSTEMROOT%\system32;%SYSTEMROOT%\system32\WBEM;C:\jdk1.3.0_01\bin;C:\j2sdkee1.3\bin;C:\j2sdkee1.3\lib\j2ee.jar;C:\mysql\bin;
Server.xml entry:
<Context path="/projektverwaltung"
docBase="webapps/projektverwaltung"
defaultSessionTimeOut="30"
debug="9">
</Context>
Web.xml:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>Projektverwaltung Zebulon</display-name>
<description>Interne Projektverwaltung Fa. Zebulon</description>
<welcome-file-list>
<welcome-file>menue.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>ProjektServlet</servlet-name>
<display-name>ProjektServlet</display-name>
<description>Servlet das die Applikation kontrolliert</description>
<servlet-class>de.zebulon.projektverwaltung.projekttool.ProjektServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<url-pattern>/Projekttool</url-pattern>
<servlet-name>ProjektServlet</servlet-name>
</servlet-mapping>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
</web-app>

Hello, I try copy C:\de\zebulon\projektverwaltung\projekttool\*.class in
location that contain file _002fprojektverwaltung_0002fJSP_0002fMenue_0002ejspMenue_sp_0.java.

Aurbuild saying "package not found under /var/tmp/aurbuild/pkgbuilds"

Hello everyone
I am using aurbuild for installing aur packages. Since some time now, I keep getting the error message:
package not found under /var/tmp/aurbuild/pkgbuilds
For example the exact message is:
lib32-pciutils not found under /var/tmp/aurbuild/pkgbuilds
No result found
What can I do about that?
Thanks in advance
b1

Please see our Forum Etiquette regarding bumping b1: https://wiki.archlinux.org/index.php/Fo … te#Bumping
Have you tried if the same thing happens with other packages and AUR-builders?

WTE-03501 WTCSYNC package not found

WTCSYNC package not found
I Am trying to configure icache after it failed during installation. The configuration assistant fails while "Adding User List" process. The process fails at export from the origin database. I have configured extproc and tnsnames.ora all correctly.
I tried to do "manual procedure to Add the user List" as per Note:122459.1. I have exported and imported to icache "
imp "'/ as sysdba'" fromuser=system icache=users ignore=y
file=$ORACLE_HOME/dbs/icache_exp.dmp"
But in next step "execute wtcsync.configuser();" failes as there are not wtcsync package or schema or any objects with that name in "iCache" database when i checked as "internal".
What should i do to create this package or do i miss something ?
Any help would be appreciated.
Regards,
null

Hi,
I got the same problem, but what is Note:122459.1 ? Thanks.

Jboss Package not found

I run Jboss 3.0.6 with Jetty.
I have deployed the IText.jar for pdf creation.
in the JBOSS_HOME/server/default/lib folder.
If I try to import from a web page
the package :
<%@page import="com.lowagie.text.*" %>
I get the following error:
Package com.lowagie.text.* not found
The same error happens if I put the jar in
WEB-INF/lib folder
What could it be the cause of my package
not found problem?
Thanks.
C.

It seems that I had some problems
with my JAR file, because a new download
o theitext.jar works...

Servlet package not found

I am trying to compile a servlet and i keep getting the error 'servlet package not found' I went and downloaded the servlet package but am unsure how to implement. I assume the i would need to ammend the classpath or path, but not sure. If someone could give some simple instructions, I'd be grateful.

hi,
as mentioned you will have to add the servlet package to the classpath environment variable.
lez say the java servlet class files are present in the servlet.jar file.. herez how u would add it to the classpath ..
set CLASSPATH=%CLASSPATH%;<path-to-jar>\servlet.jar;.
Therez a dot at the end of the classpath (this puts the current directory in the CLASSPATH)
you would have to replace the <path-to-jar> with the actual location for eg
set CLASSPATH=%CLASSPATH%;c:\java\servlets\lib\servlet.jar;.
hope this helpz
cheerz
ynkrish

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

The request failed with HTTP status 404: Not Found

Hi
BPC version we are using is : 5.0.502
When we Publish all reports using the steps below:
a. Log into BPC Web
b. Click on Available Interfaces> Select BPC for Administration
c. Under Web Admin Task Click Publish Reports
d. Select all of the reports and click the green check mark to publish the
reports.
I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
Event Type:     Error
Event Source:     OutlookSoft log
Event Category:     None
Event ID:     0
Date:          12/8/2008
Time:          11:26:42 AM
User:          N/A
Computer:     BPCAPP
Description:
==============[System Error Tracing]==============
[System Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditMgrService/SetAuditReportFiles
[DateTime]     : 12/8/2008 11:26:42 AM
[UserId]       : MMPlanning
[Exception]
    DetailMsg : {The request failed with HTTP status 404: Not Found.}
==============[System Error Tracing End ]==============
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
If anyone knows the resolution for the above issue, please help me.
Thanks in advance
Sajeev Abraham

Hi
Thanks for the response.
Below are the full contents of the error message pop-up.
( System.Expection: the reguest failed with HTTP status 404:Not found at
Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
[]args,sTRING[]paramnames, Boolen[]CopyBack)
at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
strApp,string strFiter)
url is given below
http://<HostName>/osoft/Admin/WebAdminMain.aspx
BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
Sql Reporting server is working.. I could connect using sql management studio.
Thanks

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

46C- ECC6 upgrade with EHP4 SAP_BASIS package not found

Similar Messages

Maybe you are looking for