46G300U No USB Function

Recently tried to view photos using a Flash Drive and the USB port on my TV for the first time after owning it for about two years. No joy! A check of the 'SetUp' menu shows the 'PC Settings' and the 'Media Player' settings are grayed out and not accessible.
I have tried two different Flash Drives from different manufacturer's with no luck. I don't really know if this TV is capable of this function, but it does have the USB port installed so I would think it does.
The instructions for use of the Media Player, in the Operator's Manual, are pretty straight forward but they give no clue on how to turn on the Media Player. Thoughts and help anyone?
Solved!
Go to Solution.

No problem at all. It was a Lexar® JumpDrive® FireFly USB Flash Drive, 16GB.

Similar Messages

USB Functionality in Virtual Mode

Cannot use USB devices in Windows XP Mode. Running Windows 7 Professional. When I click on the USB menu item, get:
"The virtualization driver needed for USB functionality is not working."
There is no USB listed in the Device Manager Tree.
There are 3 devices listed with question marks. All three say "Virtualization PC Integration Device."

Hello Hetal and others:
I am having the following issue related to USB connections in the XP VM:
Inside of Windows XP mode - Windows Virtual PC, When I click on the USB button (to attach/detach USB devices), a popup window appears, titled: "Windows XP mode - Windows Virtual PC" with a big red X to the left of the message: "Virtual PC cannot support
more then 16 USB devices. Disconnect one or more USB devices and try again." (See below).
I poked around but haven't found a cause, solution or any mention of this exact error message on the Internet yet.
I do not have 16 USB devices appearing anyplace (device manager, etc). I can't attach any because I can't get past that message, Clicking OK dismisses the pop-up until clicking on the attach/detatch USB dropdown button again.
I tried uninstalling the USB Virtualization Connector Driver and then reinstalling it again (as per your instructions above) hoping it might reset any enumeration counters for the number of USB devices connected to the XP Virtual Machine, but reinstalling
the USB Virtualization Connector Driver on my Win7 host does not seem to fix this issue. I continue to get the error message window (see below).
Are you aware of any fixes I can try to correct this issue I am having with my XP Virtual machine? I'm trying to verify a legacy printer is working proplery and I need to install the drivers/software on the XP VM as there are no current drivers for
Win7 for this printer.
Any help would be greatly appreciated!
Thanks, Max

Set up UWB wireless usb function

Hi,
Recently I purchaged the 6459CTO T61p with the UWB wireless usb function. I'm trying to get it to work with the wireless Lenovo 'enhanced performance keyboard&mouse' without the usbhub, but my laptop doesn't find any wireless devices. Al my wireless functions, except bluetooth, are running. All suggestions are welcom.
Che

Sorry there are not any Wireless USB Peripherals yet. The "Enhanced Performance Wireless USB Keyboard and Optical Mouse part number 73P4067" uses a proprietary wireless signal.
http://www-307.ibm.com/pc/support/site.wss/MIGR-57923.html

Toshiba 55VL963 - TV to USB function reports write errors

Hi,
I have 55vl963 TV with lastest firmware 6.9.MD.1
I am trying to get channel lists and other settings through Hotel clone function.
However, it seems the TV to USB function often reports write errors (or sometimes ends successfully but generates corrupted files).
I tried different USB media, formated in FAT16 or FAT32.
Thanks for any help on resolving this.

Tonny, I'm not sure about my 32RL900A, as I have not had any problem with USB recording, (and have forgotten whether it has its own "Format" function), but suggest that you look in the setup area of your menu, and see if your model has the "Format Disk" function, and if so, see if your model will format your USB stick, and then, if so, use it.
As I said, it has been a little while since I plugged a USB stick in to ours and it has been left in and used a number of times, without any problems, so such things have a habit of being forgotten, when everything is going smoothly!!!
donhe7

Palm Pre - USB Function via Bluetooth

Hi Folks,
Is there a way to to utilize the pre USB Date capability via Bluetooth? The idea it to transfer pics, music and media to/from the Pre and MS Vista without the cable? I have paired them without issue, though do not see how this would be done.
thanks for any comments,
rs
Post relates to: Pre p100eww (Sprint)

Earlier, I was trying to do this today with my Dell Mini9, but it didn't work.
I called Palm Tech Assistance and after some time they informed me that currently the Pre will not perform this function. Specifically, (in my case) the Pre needs to support OBEX format and does not.
I was extremely frustrated by this, and after examining the forums, see now that many other folks are up cr@p creek without a paddle because of Palm's "oversight".
My Suggestion would be to follow the Carkit Bluetooth forum posters...
We need to consolidate the many many scattered posts on this issue and press for action from Palm!!!
Too many single post threads on this topic makes it a sleeper... a Non-issue in the eyes of Palm. Hopefully that changes and folks can consolidate their complaints here.
Its astounding that we got robbed of this ability... its so fundamental that I unfortunately didn't consider researching this before buying the Pre.
My fault obviously, and I sure do love many of the wonderous features of the Pre, but at the same time I have to practical and decide what will work for my uses: sure makes that HTC Hero coming up on Sprint look mighty appealing unless Palm makes this issue right. Pre-orders on my used Pre anyone?

24" Cinema display USB functionality just disappeared!

OK, My girlfriends 24" Cinema display arrived today for her MBP.
I set it up earlier and tested it with my MB. Looked absoluetly fine. Plugged in the USB keyboard she ordered too and that worked fine.
She arrived back from work, I got out her MBP, plugged it in, everything seems fine so far.
Now we tried it in clamshell mode. Closed the lid on the MBP, waited a couple of seconds and hit a key on the USB keyboard.. MBP waked and the display wakes.. great!... but the keyboard doesn't work :o
From this point on NO ports seem to work off the back of the display. The Camera and Audio devices also seem to be unrecognised by the Mac now.
Disconnected everything from the Cinema Display, powered it off for about a minute. Still no joy when it comes back.
Restarted the MBP, also did a PRAM reset.. still no joy.
Connected my MB to the Cinema Display.. behaves the same.
Is there the slightest possibility that something needs resetting do you think or does this sound like the thing has gone trotters up already?
She is using latest patches on Leopard btw. but my MB is running the latest Snow Leopard patches and behaves the same.
Message was edited by: AndrewSmith

SuperDrive
Probably not. That drive requires more power than a regular USB 2.0 port supplies and isn't compatible with other Mac models.
USB Ethernet Adaptor
Yes.
(41492)

No USB Functionality After Coming Out of Standby Mode - Windows XP SP2

I currently use my MacBook with Boot Camp to run Windows XP SP2 (as the default boot OS). I have enabled standby so that I can save battery power. However, whenever I come out of standby, it seems as if the USB ports no longer work. Sometimes I'll have a USB mouse plugged in and it will no longer work after coming out of standby (in the past, it would take like 10 minutes to work, but now it seems to not work at all). I have tried unplugging it and plugging it into a different USB port with no success. I have even tried another USB device (a digital photo frame product) and it doesn't detect either (although it seems to provide power via the USB port because the digital photo frame shows the "connecting..." screen). Any help regarding this is greatly appreciated, since its so frustrating to have to reboot to gain access to my USB ports. Thanks!

Same with BootCamp v2.1 and in XP SP3. More Apple software bugs it seems (seem to be rampant across all their gadgets - e.g. iPod Touch 2G v2.1.1 WiFi WPA/WPA2 failures, etc.).
Frustrated, thinking about third party Bluetooth keyboard mouse (e.g. Logitech DiNovo Edge works great on my Mac mini with it's own mini USB bluetooth receiver, just tap a key to resume from standby like you're supposed to be able to!) -- or a traditional Logitech wireless.
MIS (kscorp)

Windows doesn't start. Black screen. lights are on. no usb functions.

Hello there: I had a "display driver stopped working and has recovered" message for a while after upgrading to win 8.1. Now i get black screen. Nothing works. Hp pavilion 2700. Any help would be greatly appreciated.

HI @Luke_Lasting ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 2700 Notebook and black screen. Here is a document on computer will not start.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

USB functionality gone on both ports on Powerbook G4

I've posted here with the incident that led to this loss of both my USB ports.
What basically happened is a little (I mean, very little) spark on the left USB port as I was plugging in the cable from my HP CLJ2600n. Then all USB devices stopped mounting/getting recognised by the system.
Don't want to be overly optimistic, but:
•System Profiler reports on all USBs,
•System Profiler reports on all IO Extensions, including the IOUSBxxx Extensions, that they are Valid, Authentic, Dependencies are Satisfied and Integrity is Correct, and
•/usr/sbin/system_profiler in Terminal.app reports on all USBs.
Whenever I plug any USB device on either of the two ports, however, I get the following lines (or similar) in system.log:
Apr 6 12:45:57 localhost kernel[0]: USBF: 79. 6 AppleUSBOHCI[0x1d87800] Processing WDH before suspending
Apr 6 12:45:57 localhost kernel[0]: USBF: 79. 6 USB Controller on bus 59 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:45:57 localhost kernel[0]: USBF: 79. 6 AppleUSBOHCI[0x1d86000] Processing WDH before suspending
Apr 6 12:45:57 localhost kernel[0]: USBF: 79. 6 USB Controller on bus 27 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:45:57 localhost kernel[0]: USBF: 79.265 USB Controller on bus 27 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:45:57 localhost mDNSResponder: Adding browse domain local.
Apr 6 12:45:58 localhost kernel[0]: USBF: 79.429 USB Controller on bus 27 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:45:58 localhost configd[41]: WirelessConfigure: 88001003
Apr 6 12:45:58 localhost kernel[0]: USBF: 79.656 USB Controller on bus 27 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:45:58 localhost kernel[0]: USBF: 79.675 [0x1db6b00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b000000)
Apr 6 12:45:58 localhost kernel[0]: USBF: 79.833 USB Controller on bus 27 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:45:58 localhost configd[41]: initCardWithStoredPrefs failed.
Apr 6 12:45:58 localhost kernel[0]: USBF: 80. 79 USB Controller on bus 27 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:45:58 localhost configd[41]: WirelessConfigure: 88001003
Apr 6 12:45:59 localhost kernel[0]: USBF: 80.327 USB Controller on bus 27 received and unrecoverable error interrupt. Attempting to recover (0,0,0)
Apr 6 12:46:55 localhost kernel[0]: USBF: 136.947 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:46:55 localhost kernel[0]: USBF: 136.977 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:46:56 localhost kernel[0]: USBF: 136.981 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:46:56 localhost kernel[0]: USBF: 137. 11 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:46:56 localhost kernel[0]: USBF: 138.215 [0x1db6b00] The IOUSBFamily was not able to enumerate a device.
Apr 6 12:47:55 localhost kernel[0]: USBF: 196.948 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:47:55 localhost kernel[0]: USBF: 196.978 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:47:55 localhost kernel[0]: USBF: 196.981 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:47:55 localhost kernel[0]: USBF: 197. 12 ControlTransaction: control packet 1 error 0xe0004057
Apr 6 12:47:57 localhost kernel[0]: USBF: 197. 15 [0x1db6b00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b000000)
Does anyone out there think I might have a hardware problem? Or just a software one?
Should I try reinstalling the latest MacOS X Combo Update?
Many thanks, as always, people.
PS I've entered the same post over at 'Using MacOS X Tiger', in an attempt to get some attention since I wasn't sure just where this issue would fit better.

Since this thread is almost starved, and since there seems to be some posts over in the Using MacOS X Tiger area, please post there if you have some idea.
Many thanks, guys.

Some USB functions have become inoperable

My wife has an AlPB 1.67. She was using an external USB keyboard and mouse. Suddenly, these have become inoperable. They both work with other computers, so they are ok.
I can connect a USB iPod and that works.
I've done an Erase and Install, and still they don't work.
Any ideas would be most welcomed. An Open Firmware reset?
Thanks in advance
David

When there's an issue with the USB port(s), often a power management unit (PMU) reset will fix it. See the Apple note at http://docs.info.apple.com/article.html?artnum=14449 . If that doesn't do it, a PRAM reset may, see http://docs.info.apple.com/article.html?artnum=2238

Security Wipe - No power up, no screen display no usb function

I did a security wipe from my phone, it was locked from the previous owner and they didn't bother cleaning it up. So I entered the wrong password 10 times then typed in blackberry to start the security wipe.
The security wipe did not finish properly after an hour an a half. I did a battery pull, and now the phone wont start up.
When I hold the power button for 10 seconds, it flashes twice, then stays on like it is starting, then the screen shows backlite, but won't show any icons or instructions. The phone also won't connect to the computer via USB. It doesn't show up in Windows 7.
Any ideas??
I tried the following website, and it doesn't work for me:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB33480&sliceId=2&cmd=displayKC&d...

Start up BlackBerry Link and go to the device settings. Plug in the phone and it should give you -- for a brief time -- the option to reload the carrier firmware.
Take it.
That should reload the carrier's base firmware and wipe all storage.
Market Information? Come read The Market Ticker!

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

Macbook Air + 30" Apple Cinema Display + Powered USB hub

I just received my dual link DVI to mini display port adapter in the mail today, and so far it's working just fine connecting my newer generation Macbook Air to the older 30" Apple Cinema display (the Air is closed, with an Apple wireless mouse/keyboard connected via Bluetooth).
I'm wondering if anyone has any success connecting a powered USB hub to either the adapter itself or the 30" display in order to gain some USB functionality out of the Air? I have a powered 4 port D-Link hub which worked fine directly into the Air, but I can't seem to power any devices when it's hooked up to the 30" display or directly into the adapter. I can't even get devices (external powered hard drives, Mbox) to work when plugged into the screen directly (no hub).
I called AppleCare about the problem and they said they don't support USB hubs via the 30" Apple Cinema Display when connected to the Macbook Air, but if anyone has any experience with this situation or if someone could offer me advice to get USB functionality out of my MBA + 30" ACD, it would be greatly appreciated!

Welcome to the Apple community.
Unfortunately not.

Error while reading USB Port : using JSR80

Hi Everybody
Iam trying to read the data from a usb device [a fingerprint scanner] by using jsr80 with the help of following files which are in my classpath
1) jsr80-1.0.1.jar
2) jsr80_ri-1.0.1.jar
3) jsr80_windows.jar
4) commons-logging-api-1.1.1.jar
5) javax.usb.properties
6) LibusbJNI.dll
7) LibusbJava.dll
8) libusb0.dll
I was trying the follwoing program
import javax.usb.*;
import java.util.List;
public class TraverseUSB
        public static void main(String argv[])
          try
              // Access the system USB services, and access to the root
              // hub. Then traverse through the root hub.
              UsbServices services = UsbHostManager.getUsbServices();
System.out.println("Getting Available USB Services ");
              UsbHub rootHub = services.getRootUsbHub();
System.out.println(" Access to the USBrootHub ");
              traverse(rootHub);
          } catch (Exception e) {
          System.out.println(e);
        public static void traverse(UsbDevice device)
          if (device.isUsbHub())
             // This is a USB Hub, traverse through the hub.
             List attachedDevices = ((UsbHub) device).getAttachedUsbDevices();
             for (int i=0; i<attachedDevices.size(); i++)
               traverse((UsbDevice) attachedDevices.get(i));
          else
     System.out.println("USB Device");
             // This is a USB function, not a hub.
             // Do something.
}but when iam executing the program iam getting the exception
The Ordinal 44 could not be located in the dynamic link library "libusb0.dll" , it is coming in a message box
javax.usb.UsbException: Error while loading shared library LibusbJNI.dll : C:\WINDOWS\LibusbJNI.dll:
The operating system cannot run %1
Please help in this regards
Thanks in adv
Sulfikkar

I am also facing the same problem with the code and getting errors while running my application in Eclipse is this some version problem or any other isues are afftecting my application to run successfully.
I get following errors while running my application inspite of having all the jars and libusb for windows:
Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/commons/logging/LogFactory
     at com.mcreations.usb.windows.JavaxUsb.<clinit>(JavaxUsb.java:65)
     at com.mcreations.usb.windows.WindowsUsbServices.<init>(WindowsUsbServices.java:46)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at java.lang.Class.newInstance0(Class.java:350)
     at java.lang.Class.newInstance(Class.java:303)
     at javax.usb.UsbHostManager.createUsbServices(Unknown Source)
     at javax.usb.UsbHostManager.getUsbServices(Unknown Source)
     at org.symphony.embedded.ShowTopology.getVirtualRootUsbHub(ShowTopology.java:56)
     at org.symphony.embedded.FindUsbDevice.main(FindUsbDevice.java:29)

GS70 2QE - Help needed.... non of my USB ports work :(

Hi guys and gyals...
First time posting here and I wish it was in a positive light but unfortunatley I have an error on my laptop thats preventing me from using it.
So I purchased a GS70 2QE with 970m and 4720 processor. I was very happy for the first two days with its performance until the time I had to use the USB ports. I realise that non of them work at all. Im normally quite good at solving tech issues but this one is going beyond me. Ive done updates on all intel/windows/nvidia drivers as far as I can tell, plus Ive checked the BIOS for usb settings and they are all enabled. Ive switched off the power saving for usb function as well as doing TWO complete reinstalls of windows and still I have no usb.
On the device manager all usb devices seem errorless except one... 'unknown USB device (link in compliance mode)', might I add that nothing is plugged in at this time. Clicking on this brings up the following:
"Windows has stopped this device because it has reported problems. (Code 43)
The SuperSpeed link to the USB device keeps going to an error state Compliance. If the device is removable, remove the device and then disable/enable from device manager to recover."
Ive attempted to uninstall all usb devices and reboot yet windows just reinstalls the same things and I get the same issue.
Now unfortunatley MSI arent so great. Ive called their UK support number 4 times and its just rang through after 30 mins each time. I have also sent an email to support.... no response.... What the hell is this all about... when I purchase a machine thats this expensive I kinda expect some support value.
Anyway Im in limbo now, cant work, cant game, cant do anything but browse the net with my trackpad. Other than this issue Im happy with the laptop.

Im on win 8.1 out of the box. On 8.1 page theres no drivers for usb 3.0. Now I know there is a problem whereby intel havent released drivers for usb 3.0, all drivers are being given by microsoft as I understand, and the only work around is to use win 7 drivers that are edited. Now I have tried this and while the extensibile host controller accepts the new driver it still doesnt make the ports work. Im hoping that this issue with intel and usb 3.0 is the problem as I would like to solve this out as a software problem as opposed to sending it off for a hardware fix.
After your post I downloaded the win7 usb 3.0 drivers and eventually edited them as per this page:
Google search: plugable windows 8 and host controllers
As I stated above, no luck....

46G300U No USB Function

Similar Messages

Maybe you are looking for