4780 All in one printer keeps disapperaing

I have an HP smarttouch computer running windows 7 64bit. I install my wireless 4780 printer and about once a week the printer disappears and I have to reinstall it. Is there a fix for this because it is crazy annoying?

hi,
Reinstall the software driver again. Once reinstalled, click here to download and install the Windows 7 Critical Update to enhance reliability of network connection.
Kiko

Similar Messages

TS4212 can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. I have been looking for over a week now   and even chatted with the USA but cannot get it to work

can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected.   what do I do
I have been looking for over a week now   and even chatted with the USA but cannot get it to work.
I am really struggling

Thanks
someone named Eloisa   she gave me   a phone no.   or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand

My 2210 all in one printer keeps giving the message "Remove and check cartridge"

My 2210 all in one printer keeps giving the message "Remove and check cartridge." Although I go through procedures outlined in manual, message keeps reappearing. Suggestions?

Hello again!
Still having problems but here's more info: Checked "Resume" but Message next to the job says ERROR but that 'Pinter is ready'.
However, on the PRINT & FAX page in System Preferences it has 'Idle' next to the psc1317 (default) printer.The computer scans the document but wil not print it. With printer off I disconnected the power cable and the USB from the computer then re-connected after 1 minute. When I turned the printer back on it printed the test sheet but not the document. I have also unistalled then reinstalled the hp1317 Snow Leopard software and driver and computer says that all software is up to date. Apart from a dodgy connection I have no idea where to go from here!

Hp 6310 all in one printer keeps automatically uninstalling

HP 6310 All-in-one printer purchased in 2008.
The printer keeps automatically uninstalling itself.
1. I have tried everything including downloading drivers.
2. I have completely uninstalled and reinstalled from disc. It still keeps happening.
3. I have tried leaving the computer and printer on over night so that the setup does not change. No it still happens.
4. Even when I do get it printing. It can print of some pages. The after some pages it decides that it and the printer has again uninstalled.
5. It can take hours to get the printer to work. Installing, switching the printer on and off. Even when the printer is set up and states its all ok. The printer won't work. Well sometimes it might but mostly not.
HELP.
Vi

Hello @Vipro9 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing printer driver issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, do you have the same issue making a copy as opposed to a print?
Good luck and please let me know the results of your findings. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

C7250 All in One Printer keeps jamming papers that are printed from Word

I have already followed all directions shown in the videos in support and this has NOT fixed the problem.
The paper is jamming in the left hand corner when looking inside the printer. Something is too tight and catching the paper. Any suggestions?
Where can I take the printer to be fixed or do I have to send it to HP? If so, I;'ve been told it could cost me as much as a new printer. This printer is only possibly 2 years old. Any ideas??

I was having the exact same problem and came across this solution and it work!!!!!
I have seen this suggested in a HP Support Forum. See if it solves your problem:
1. Go to your printers folder, right-click on (the network connected) printer that you are having the problem with and select "Properties"
2. When the properties window opens, click on the "Ports" tab.
3. Near the bottom of the Ports tab window is a check box for "Enable bidirectional support", uncheck it and click "OK"
Good Luck

HP Officejet pro 8500A Plus All in one printer - Keeps on wanting to realign printheads

Please could someone out there help me with a very annoying problem. The message 'realigning prontheads' keeps on appearing and then spews out another relaignment graph. I have cleaned the printheads and contacts manually with no effect. I would be grateful if anyone has any ideas - thanks

This alignment page document may help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03094803&lc=en&product=4116838&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

I keep getting an error number oxc19a0035 on my c7250 all in one printer

i keep getting an error number oxc19a0035 on my c7250 all in one printer, does anyone kn ow the fix?

I solved the problem on mine by opening the cartridge door and extracting each color cartridge and wiping the heads which had gummy ink deposits on them. Once reseated, the machine returned to its old shiny former self.

Keep getting printer error message. Have apple compr using hp ohotosmart c4680 all in one printer.

I am having problems printing from my IMAC computer. I am using photosmart C4680 all in one printer. I have repeatedly uninstalled printer and reinstalled printer from original disc. Error message coming up when I attempt to print. Used to print from Hp officejet printer d145. I began having problems with it. I have discontinued printing from it and I have uninstalled software from that printer. Error message states "Library/StartupItems/HP All-In-One Communications" has not been started because it does not have the proper security settings" message comes up when starting up computer. How do I correct this problem?

I recommend that you take a look at the following document. It should help to resolve your issue.
hp printer/scanner/copier 900 series software/driver
Try that and let me know if it works for you or not. If it doesn't let me know what happened and I will see what I can do from there.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Scanning multiple pages with all in one printer using AiO software.

I have the HP all in one printer and when I scan a document even if I add a page, each page has its own PDF identification. I cannot seem to get multiple pages in one scan that I can email as one document. Please advise.

Hi Grwltgr
If you have an ADF(Automatic Document Feeder) tray keep all the pages you want to scan and start scan. All the scanned pages will be added in a single pdf.
If you dont have an ADF tray, i might be able to help you if you can let me know the Complete Model Name.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ? Loooking for any answers ! Thank Yopu ,JS

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

My PC can't stand the connection to HP Officejet 4630 all-in-one printer

Hi everybody,
I got a HP Officejet 4630 all-in-one printer, i manadge to connect it to the network. I select a static IP and i can reach the printer through the browser.
I can add the printer to the PC, the system can find it after few second od scannig, and than i can print a test page.
The problem is that if I reboot the PC or the printer, or both, i can' print no more.
The icon of the printer in the "device and printer panel" is blurred with the green thick, but i can still reach the print through the browser and i can print with the ePrint.
If I use the "problem solving" service of Windows, it can't find any problem. But i can't still print.
I don't know what to do, it seems a problem of the computer (i even tryed to turn off the firewall but it doesn't change anything)
Is there someone that could help me?
Thank you so much

Hi @poporni,
Welcome to the HP Forums!
I noticed that your HP Officejet 4630 keeps losing the wireless connection on Windows 7. I am happy to look into this connection issue for you!
Please, take a look through this guide, Printer Does Not Maintain Wireless Connection.
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend, our HP Wireless Printing Center - Troubleshooting Issues website.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do i remove the printhead on hp 1600xi all in one printer?

I keep getting the message remove and check cartridge on the display of my hp 1600xi all in one printer. I've replaced the ink cartridges. Turned it off, and on. Unplugged it, and plugged it back in. I still get that message. The only other thing that I can think of is to replace the printhead. Any suggestions on how to do this?

Hello jrfirepup, and welcome to the HP Forums.
I see you are looking into printhead options. This particular model of printer has built-in printheads, making them non-removable.
I would recommend removing the cartridges and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest this document on Ink Smears or Streaks.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printing problem - HP Officejet Pro 8500 Wireless All-in-One Printer, Red color fads on 4th copy

I have an HP HP Officejet Pro 8500 Wireless All-in-One Printer, and am trying to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have brand new HP ink, and am printing on HP Color Injet Paper. I have renectly replaced the Black/Yellow printhead (at least 6 months ago). At first when I cleaned the printheads, I could print 2 or 3 pages showing my RED color. Then turns back to magenta. When I received the test patterns after cleaning the print heads they are all perfect with no lines.
What is going on and how can I fix it?
This question was solved.
View Solution.

Hi TM1997,
I understand you have an Officejet 8500 Wireless that is not printing red properly, it keeps turning to magenta. I'm sorry to hear this, but I will definitely do my best to help you!
As I'm sure you saw, when replacing the black and yellow printhead, that there are two printheads in the Officejet 8500 and the second one controls the magenta and cyan. I would suggest that you first have a look through this Troubleshooting Print Quality Issues document. You can also manually clean your printhead with the steps in this 'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem... document.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear? (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

Hey , Thanks for posting in the HP Support Forum. I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality. I would like to help you with this but that particular part is not replaceable. I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards,

HP update HP Officejet 6500A Plus e-All-in-One Printer-E710n multi fails @ 96%Z

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows Vista
HP is trying to update my HP Officejet 6500A Plus e-All-in-One Printer - E710n w/ "HPZSetup.exe & multi fails @ 96%
Errors:
HP-PhotoSmart All-In-One Series "Error" "wStub" "2229580"
Same message appeared multiple times with new numbers: 459624; 525134; 328216
I am on WIFI but system always shows me on USB. I thought maybe that was the problem so I connected by USB. No Help.
I assume this is an update?? HP is insistant and keeps sending me this update which alwaysends in FATAL ERROR at 96%
Next steps?? Thanks JLM_JR
This question was solved.
View Solution.

No Problem. Is everything working now or this tool only removed the HP software? If so, then try downloading the full feature software to see if this fails or not here. Please choose your correct operating system; Either 32 bit or 64 bit. I will be looking forward to hearing from you.
I worked on behalf of HP.

4780 All in one printer keeps disapperaing

Similar Messages

Maybe you are looking for