4890 cyclone oc and cpu

i just got my newhd4890 cyclone oc vga card and i installed it!
unfortunatelly i didnt get any signal out of the vga or the hdmi
and after some reboots i got a message that the overclocking i tried doesnt work and if i should change the bios settings back to normal!
the thing is that i didnt touch anything in my bios setup and i am starting to wonder if my cpu is not strong enough for the card i ve bought...
maube i should have bought the new proz first!!
any suggestions??thanks in advance!!!

ok
intel Prescott pentium 4 s775 3.2ghz SL8Q6
MSI X48C Platinum bios version V 7.0
kingston 2 modules of PC2-6400 2gb(4gigs alltogether)
hdd seagate baraccuda 750gb, seagate baraccuda 250 gb (both sata)
1 dvd reader, one recorder
windows vista ultimate 32bit
Thermaltake W0116 psu 750 watt ATX 12V 2.2(1 x 20/24-pin Main Connector, 1 x 4+4-pin +12V Power Connector,8 x 4-pin Peripheral Power Connector, 1 x 4-pin Floppy Drive Connector, 2 x 6-pin PCI Express Connector, 6 x 5-pin S-ATA Connector) ATI Crossfire certified.
the problem is in my hardware cause i dont get any signal and i cant even see the bios...

Similar Messages

4890 Cyclone OC no boot & no post on K8N Neo4 Platinium REV 3A

Hi,
Just bought a 4890 Cyclone OC, and I'm unable to get the PC to post and boot.
The leds report Video initializing issue.
I've the latest bios (7.1) and event tried to reset it, no success.
I've a 850W Zalman ZM-850HP PSU.
Help appreciated.
BR

See screenshot on this thread:
https://forum-en.msi.com/index.php?topic=129615.0
The card is damn noisy, far far away from the supposed 17dB, really far.
Fan always operate at 100% I think and the noise doesn't change at all whatever it's idle or in game playing.
The card is amazingly hot, so hot it's hard to touch with fingers for more than a few sec.
The PC case itself is "melting", even with the 3 big fans I use.
I would vote for non working sensor (any issue with old nforce4 chipset or W7 ???) but T° at idle is just too much for normal use (240Mhz)
I'll try to get this card replaced, cross fingers.
BR

Can no longer overclock CPU after installing 4890 Cyclone OC

I recently purchased a MSI 4890 Cyclone OC to replace my XFX 8800 GT. With the 8800 GT, I was able to overclock my E8400 to 3.6 GHz from 3 GHz stock. After I installed the 4890, my PC will no longer accept any CPU overclock. When I power on my system with any OC, the PC will start to come up, power cycle itself before POST and reset the BIOS back to default clock speeds, and finish booting into Windows XP Home. Even with no OC, the PC seems to take longer to POST than with the 8800 GT.
I uninstalled the Nvidia driver before installing the 4890 and installed the latest ATI driver v. 9.8. I flashed my motherboard's BIOS to the latest version, set it to the defaults, and then put my OC settings back in. However, that didn't help.
I read in the NCIX forum that someone else had this exact same problem with his 4890 Cyclone, and he had a different model Gigabyte board. I'm wondering if there is some sort of incompatibility. Thanks for any help.

Quote
I put my 8800 GT back into my PC and I can overclock my CPU just fine again.
Yes, I understood you the first time.
Quote
I have not talked to Gigabyte yet since my problems only occur with the 4890 installed.
That it precisely why I suggested to contact Gigabyte. Maybe they can reproduce it and come up with a BIOS Fix or something. I had a 4890 Cyclone here for testing last week which I used to build a system for a friend. I had no such issues when I tested the card in my P45 Platinum (E6600 overclocked to 400 x 9) and he also has no problems on his P45 Asus Board (OCed Q9650).

MSI 4890 Cyclone - Computer Reboots With Crossfire Upon Game Startup

Hello,
I built a new computer back last December of 2009 and have been using an MSI 4890 Cyclone graphics card. I am using Windows 7 and have been able to play all video games pretty much with maxed out settings without any issues. A buddy of mine has pretty much the same exact setup I have, but wanted to get a new video card. I decided I wanted to try out the crossfire capabilities and ended up putting his MSI 4890 Cyclone in my box to crossfire with my 4890 the other day.
Everything seems to be setup correctly and the crossfire shows as enabled in my CCC. The issue I am having is that any game I load up with crossfire enabled running with both 4890s causes my computer to instantly reboot. I've disabled crossfire and the games run fine. I also tested both 4890 cards by themselves just to verfiy that there isn't an issue with either card and they both tested just fine.
I don't think there is a heat issue because my computer always reboots at the same exact spot when I load up the game. I also tested other games and the same exact thing happens right upon startup. Any ideas? If you need any additional info from me, please let me know. Any help is much appreciated and thank you in advance!
Here is what I am running:
VIDEO CARD #1: MSI R4890 Cyclone OC Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card
VIDEO CARD #2: MSI R4890 Cyclone OC Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card
PROCESSOR: Intel Core 2 Duo E8500 Wolfdale 3.16GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor BX80570E8500
MOTHERBOARD: ASUSTeK Computer INC. P5E3 PRO Rev X.0x
POWER SUPPLY: RAIDMAX HYBRID 2 RX-730SS 730W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
RAM: G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK
COMPUTER CASE: Antec Three Hundred Black Steel ATX Mid Tower Computer Case
HEAT SINK: ZALMAN CNPS9500 AT 2 Ball CPU Cooling Fan/Heatsink
MONITOR: Hanns·G HG-281DPB Black 28" 3ms Widescreen LCD HDMI Monitor 500 cd/m2 800:1 Built-in Speakers

Please test with one memory modules only and manually set the DRAM Speed to DDR2-800 and the DRAM Voltage to 1.9V. Then retest.
In case that does not change anything, please try a different PSU.
Also, please contact ASUS Support and ask for information about ANY kind of problems regarding Crossfire combinations on this mainboard.
I highly doubt, that this issue has anything to do with the two video cards in particular. To properly "engage" these two video cards in crossfire is first and foremost the job of the mainboard/chipset and the respective BIOS Support for this operation mode. As long as both cards are identical* have no internal malfunction and the crossfire bridge is 100% functional, this looks like a mainboard/chipset, BIOS, PSU, OS or driver issue.
*Please compare the VBIOS Versions of the two cards. This is the only thing I can think of that could interfere with proper CF operation. In all other cases, you should look elsewhere first.

4890 Cyclone OC problem?

M4A79Deluxe Asus mobo
750W PC&C Red Crossfire Silencer PSU
Phenom X4 955BE cpu(140w rated)
memory(either 4x1GB Kingston Hyperx or 2x2GB OCZ reaper PC2-8500)
1- sata 2 hdd
1- dvd
water cooling cpu only
4x 120mm case fans
2x 80mm case fans
USB wireless keyboard and mouse
sometimes a usb steering wheel, or usb joystick
5.1 surround sound speaker set up
2-R4890 Cyclone OC
1-Acer monitor
I finally added the second 4890 card, but the fan stays at 100%. Checked with CCC overdrive, and the card is reporting 127c, 0 fan speed. I also can not change the fan speed manually in CCC overdrive, always 100% and it is loud. The heatpipes are not hot though.
Things I have tried, well I tried a lot thinking it was a crossfire/driver issue but I think these are the most relevant.
1- Tried the 100% fan card solo. Same thing and I do get video to monitor.
2- Tried the 100% fan card in the PCIE slot where the non issue card was working along with changing the PCI power connectors from working card. Same thing.
3- Checked the MSI utility to see if a bios update was needed, I did this when both cards where installed. Showed that I have the most current vga bios and drivers.
I am guessing I have a faulty card, but decided to check here if anyone has any other ideas. Thanks to all, and if you need more info I will post back.

OK, I will let you know. First update:
Vendor has already given me a RMA number(less than 2 hours). The VGA card should hopefully be in the snail mail process tomorrow.
One weird thing, my RMA was degraded from replace to repair. Not quite sure about that one? Not sure if that means that it will be replaced or sent to MSI from vendor for repair/or vendor will attempt repair? Only time will tell, I guess. The only great thing is that just one of these 4890 Cyclone OC cards beats out a single 3870x2 vga card hands down. And thanks to this forum, I was taking some time to read up on this forum. I must say I am impressed, keep up the good work moderators and MSI. Thanks and will keep you updated. Special thanks to Svet.

4890 cyclone release date?

Hi, anyone know when the 4890 cyclone will be available to buy.
Thanks.

http://eu.msi.com/index.php?func=proddesc&maincat_no=130&cat2_no=137&prod_no=1857
http://event.msi.com/vga/superpipe/
Cyclone Thermal Design
The cooling system of MSI R4890 Cyclone series equips 10 cm PWM fan which is the biggest on HD 4890 in the industry. Because of the bigger fan, large amount of air flow takes away the heat with lower fan rotation rate. Cooling efficiency can be increased and operation noise can be reduced. Moreover, MSI R4890 Cyclone carries 4 heat pipes to quickly take away the heat. With an extra large 10 cm PWM fan, MSI R4890 Cyclone series provides the coolest operating environment for system to achieve the best performance.
SuperPipe Technology
Heat pipe is one of the most important components in graphics card which transfers the heat from chip to fins of the cooler. The thicker the heat pipe, the faster the cooling speed. MSI unique SuperPipe technology uses 8mm heat pipe which is 60% thicker than traditional ones and increase 90% of cooling efficiency. Therefore, MSI R4890 Cyclone series is equipped with the best cooling solution.
Military Class Components – Hi-c CAP
In order to provide consumers longer life and better quality products, MSI R4890 Cyclone series uses high quality Hi-c CAP to supply better GPU electricity. Hi-c CAP is comprised by rear Tantalum which is an extremely expensive but steady metal. Under 65℃ operating environment, Hi-c CAP can last over 200 years life long which overtakes all the solid capacitors and is the best capacitor in the industry. Furthermore, Tantalum’s high stability greatly reduces electricity less package and provides high quality power supply. Under the condition of overclocking and high temperature, MSI R4890 Cyclone series can still provide stable performance.
Military Class Components – SSC (Solid State Chock)
MSI R4890 Cyclone series carries brand new all-in-one solid state chock which effectively reduces high frequency noise under heavy system loading. Meanwhile, SSC can increase the maximum current value and provides three times current value than traditional state chock. Therefore, SSC can provide stable current when under extreme overclocking.
Military Class Components – Solid CAP
Capacitor is one of the most important power supply components. Good capacitor plays a critical role in system stability. Liquid and solid capacitors are the two main capacitors in the market. Solid capacitor has longer life span than Liquid. Under the high frequency and high temperature operating environment, solid capacitor provides even more stable power supply. Moreover, solid capacitor contains no liquid, leaking accident will not occur. To ensure best product quality, MSI R4890 Cyclone series adopts Solid CAP.

4890 cyclone Fan bearing going out.

Hey I have a 4890 cyclone non oc, and I noticed from the day I got it off of ebay that it had a bad bearing in the fan. I used some silicone oil and it helped for a bit, but the fan has gotten really noisy lately. I have also noticed that the fan can be removed and replaced. If some one could help me find a new, or used fan with good bearings it would be greatly appreciated.
Thanks
-Taylor

Perhaps contact MSI and ask them where you can get a replacement fan from. They should be able to answer that for you. You can ask here: http://support.msi.com/

Memory and CPU issue

Hi experts,
My Oracle version is:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
we have 2 node RAC. my client (WAS) connects to the DB using JDBC and establishes connection with the DB.
Now problems is coming that my RAC memory on both the nodes gets fully consumed and CPU utilisation is also very high.
We are using proxy login in our application connection. which means that connection to the DB will be created with a schema(User) and after that Proxy session will be established for a particular user. So for a request we have two session. The main session which we had will schema user becomes inactive and proxy session becomes active.
So this way we have 2 sessions for a request which is not wrong but memory and CPU utilisation are bottlenecked.
Can anyone tell what is the minimum memery that a connection takes even if its idle or inactive.
Regards,
Vikas

JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
This means the session will continue to exist.
It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
by throwing memory and cpu at the problem.
When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
Paraphrasing William Jefferson Clinton: It's the application, stupid!
Sybrand Bakker
Senior Oracle DBA

Problem with memory usage and CPU usage

Hello,
i have a problem with the memory usage and cpu usage in my project!
My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage!
It starts with ~15% CPU usage and ~70 MBytes memory usage. After ~ 24hrs the CPU usage is ~60% and the memory usage is ~170 MBytes!
After 3 days the CPU usage is almost about 70% and the memory usage is about 360 MBytes!
What can I do to reduce this huge recource usage?
Thank you!

Hi Pahe,
   I think the issue is memory usage, since CPU usage can increase due to greater memory requirements.
   Anyway, it's difficult to debug without seeing your code, can you post it (possibly for LV 7.1 compatibility)? Or just post a JPEG of the piece of code that can give problems...
   I guess you're appending data to an array instead of replace data elements, but I can't be sure...
   Have a nice day!
graziano

Can we control user request w.r.t Memory and CPU utilization in Oracle 10g

Dear All,
We are having Production with Oracle 10.2.0.4 (5 Node RAC, 32Gb RAM each) running on RHEL5.2 with 12000 Users. We have some schema say FIN, HRMS, SALES, REPORT and many dedicated users for those schemas. We need to control the user request against these schema with respect to Memory (or CPU utilization)
Suppose users using FIN schema can use Maximum 40 % of Total Memory, HRMS schema can use Max 20%, SALES can use Max 20% and REPORT can use Max 20%.
Is it possible to create any Service in Server side to handle this type of scenareo or any existing service which can be customised to fullfil this?
Please suggest me.......
Thanks,
Tusar
Edited by: gohappy on Jan 27, 2011 5:59 AM
Edited by: gohappy on Jan 27, 2011 6:00 AM

JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
This means the session will continue to exist.
It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
by throwing memory and cpu at the problem.
When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
Paraphrasing William Jefferson Clinton: It's the application, stupid!
Sybrand Bakker
Senior Oracle DBA

Macbook Pro fan running constantly and CPU running slow

So, I have a Macbook Pro 2010 2.3 i7 that has started running really slow and the fan is running constantly.
In activity monitor it shows a kernel_task running constantly at around or above 200%.
I have tried all the regular tasks. PRam reset, SMC reset and nothing seems to fix it.
I have also tried a system reinstall to no avail.
Maybe I'm on the wrong track, but from what I have read, the kernel_task might be trying to slow my CPU down because it thinks it is being overworked?
Maybe the fans are also being activated because it thinks the computer is too hot?
Anyway, if anyone has any idea as to what I can do to figure out what is going on, let me know. Thanks

Here is the EtreCheck results:
Problem description:
fans running constantly and CPU slowing down
EtreCheck version: 2.2 (132)
Report generated 4/28/15 7:42 AM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
The following internal tasks failed to complete:
/usr/sbin/system_profiler -xml SPFontsDataType
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.66 GHz Intel Core i7 CPU: 2-core
    8 GB RAM
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 141 - SN = W0020PTD7BWZA
Video Information: ℹ️
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 512 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.8.5 (12F45) - Time since boot: 0:39:23
Disk Information: ℹ️
    TOSHIBA MK5065GSXF disk0 : (500.11 GB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (73.74 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Applications/KeyRemap4MacBook.app
    [loaded]    org.pqrs.driver.KeyRemap4MacBook (8.4.0 - SDK 10.8) [Click for support]
        /Applications/Roxio Toast 6 Titanium/Toast 6 Titanium.app
    [not loaded]    com.roxio.TDIXController (1.3) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.IKMultimedia.driver.StompIO1 (1.0.0) [Click for support]
    [not loaded]    com.avid.usb.mbox.driver (1.0.18) [Click for support]
    [not loaded]    com.digidesign.fwfamily.driver (9.0f4) [Click for support]
    [loaded]    com.digidesign.iokit.DigiDal (10.3.4f181 - SDK 10.6) [Click for support]
    [not loaded]    com.digidesign.usb.elevenrack.driver (1.0.1) [Click for support]
    [not loaded]    com.ikmultimedia.driver.StealthPedal (1.0.0) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Click for support]
    [not loaded]    jp.co.roland.RDUSB0138Dev (1.0.0 - SDK 10.6) [Click for support]
        /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
    [not loaded]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Click for support]
    [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Click for support]
Startup Items: ℹ️
    DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
    RDUSB0138Startup: Path: /Library/StartupItems/RDUSB0138Startup
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.avid.mbox.helper.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
    [loaded]    org.pqrs.KeyRemap4MacBook.server.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.digidesign.elevenrack.helper.plist [Click for support]
    [running]    com.digidesign.fwfamily.heler.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.paceap.eden.licensed.plist [Click for support]
    [loaded]    org.pqrs.KeyRemap4MacBook.load.plist [Click for support]
    [loaded]    PACESupport.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application (/Applications/Dropbox.app)
    apple-scc-20150427-140055    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
    iLokClientHelper: Version: 3.5 - SDK 10.5 [Click for support]
    Silverlight: Version: 4.0.60831.0 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.1
    googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    AdobePDFViewer: Version: 10.1.1 [Click for support]
    JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
Audio Plug-ins: ℹ️
    Avid CoreAudio: Version: 10.3.4.181 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    Digidesign Eleven Rack [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Mbox [Click for support]
    RC-300 [Click for support]
Time Machine: ℹ️
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 425.51 GB
    Destinations:
        Shupester [Network]
        Total size: 3.00 TB
        Total number of backups: 66
        Oldest backup: 2013-06-17 21:18:22 +0000
        Last backup: 2015-03-19 06:26:07 +0000
        Size of backup disk: Excellent
            Backup size 3.00 TB > (Disk size 499.25 GB X 3)
    /sbin excluded from backup!
    /usr excluded from backup!
    /System excluded from backup!
    /bin excluded from backup!
    /private excluded from backup!
    /Library excluded from backup!
    /Applications excluded from backup!
Top Processes by CPU: ℹ️
        31%    mtmd
        19%    Safari
         8%    Finder
         6%    mds
         4%    Dropbox
Top Processes by Memory: ℹ️
    180 MB    Mail
    172 MB    mds
    139 MB    Safari
    131 MB    WebProcess
    106 MB    Pages
Virtual Memory Information: ℹ️
    4.72 GB    Free RAM
    3.28 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    Apr 28, 2015, 06:53:27 AM    Self test - passed
    Apr 27, 2015, 11:34:56 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113456_[redacted].crash
    Apr 27, 2015, 11:34:23 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113423_[redacted].crash

A process named "update.exe *32" and description is "Firefox" keeps using a lot of memory and cpu; the longer forefox is on, the worse it gets. How to prevent?

using Windows 7, firefox 15.0.1
This process uses more and more memory and CPU, sometimes there are several of these processes running. If I kill these processes, it doesn't seem to affect the utilization of Firefox. Then the process slowly starts to use more and more memory and CPU all over again.
This happens all the time, every time I use Firefox.

I do not have a ComObjects folder under C:\Program Files (x86)\Common Files. That is not part of Firefox.
wscript.exe is a utility included with Windows to run scripts at the system level. It generally is not used by major programs. If update.exe is starting up with Windows, you may be able to find the script that wscript.exe is running using [http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autoruns].
It definitely sounds viral. I suggest deleting the update.exe file, although Windows might prevent you from doing that until you kill all related processes. And if you have a persistent infection, the file may be restored or re-downloaded.
It might be easiest to seek assistance from a forum more dedicated to malware cleanups such as the following:
* [http://www.bleepingcomputer.com/forums/forum22.html Virus, Trojan, Spyware, and Malware Removal Logs - BleepingComputer.com]
* [http://forums.majorgeeks.com/forumdisplay.php?f=35 Malware Removal - MajorGeeks Support Forums]
Hope you get it removed.

CreateRow increases memory and cpu. Tomcat+ADF Faces+BC4J in JDev 10.1.3.0

CreateRow increases memory and cpu. Tomcat+ADF Faces+BC4J in JDev 10.1.3.0.4
My old problem is this Ineffectiveness/Inconsistency BC4J createrow in tomcat, CPU = 100%,Mem=2.2G
I have tested my Adf Faces application with jmx in server and, in my machine, jconsole and mc4j.
When cpu=100% and memory increases, jconsole constantly returned similar trace:
In all trace, I see that common is:
oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203)
oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
Therefore, I believe that function populateRow make infinity loop (or fuction fech make infinity loop, called populateRow), but I don’t know populteRow or fetch code.
tomcat Version: 5.5.16
Jdeveloper Version: 10.1.3.0.4
Adf Business component Version: 10.1.3.36.73
Java version: 1.5.0_05
Please, any oracle ACE could help me?
When cpu=100% and memory increases, jconsole constantly returned any of these trace:
First trace
java.net.SocketOutputStream.socketWrite0(Native Method)
java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
java.net.SocketOutputStream.write(SocketOutputStream.java:136)
oracle.net.ns.DataPacket.send(Unknown Source)
oracle.net.ns.NetOutputStream.flush(Unknown Source)
oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:979)
oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:951)
oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:448)
oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
oracle.jdbc.driver.T4CPreparedStatement.fetch(T4CPreparedStatement.java:692)
oracle.jdbc.driver.OracleResultSetImpl.close_or_fetch_from_next(OracleResultSetImpl.java:258)
oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:193)
oracle.jbo.server.QueryCollection.hasNextInResultSet(QueryCollection.java:3014)
oracle.jbo.server.ViewObjectImpl.hasNextForCollection(ViewObjectImpl.java:3650)
oracle.jbo.server.QueryCollection.hasNext(QueryCollection.java:2992)
oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2207)
oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2612)
oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
javax.faces.webapp.FacesServlet.service(FacesServlet.java)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
java.lang.Thread.run(Thread.java:595)
Second trace
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
oracle.net.ns.Packet.receive(Unknown Source)
oracle.net.ns.DataPacket.receive(Unknown Source)
oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:979)
oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:951)
oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:448)
oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
oracle.jdbc.driver.T4CPreparedStatement.fetch(T4CPreparedStatement.java:692)
oracle.jdbc.driver.OracleResultSetImpl.close_or_fetch_from_next(OracleResultSetImpl.java:258)
oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:193)
oracle.jbo.server.QueryCollection.hasNextInResultSet(QueryCollection.java:3014)
oracle.jbo.server.ViewObjectImpl.hasNextForCollection(ViewObjectImpl.java:3650)
oracle.jbo.server.QueryCollection.hasNext(QueryCollection.java:2992)
oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2207)
oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2612)
oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
javax.faces.webapp.FacesServlet.service(FacesServlet.java)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
java.lang.Thread.run(Thread.java:595)
Third trace
java.lang.System.arraycopy(Native Method)
com.sun.java.util.collections.ArrayList.toArray(ArrayList.java:287)
oracle.jbo.server.ViewDefImpl.getEntityReferences(ViewDefImpl.java:547)
oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:1730)
oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:2151)
oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1070)
oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:2943)
oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2841)
oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203)
oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2594)
oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
javax.faces.webapp.FacesServlet.service(FacesServlet.java)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
java.lang.Thread.run(Thread.java:595)
Fourth (and end) trace
oracle.sql.NUMBER.toBigDecimal(NUMBER.java:715)
oracle.sql.NUMBER.bigDecimalValue(NUMBER.java:2080)
oracle.jbo.domain.Number.bigDecimalValue(Number.java:551)
oracle.jbo.domain.Number.hashCode(Number.java:431)
oracle.jbo.Key.hashCode(Key.java:384)
oracle.jbo.common.WeakHashtableImpl.get(WeakHashtableImpl.java:195)
oracle.jbo.common.WeakHashtable.get(WeakHashtable.java:98)
oracle.jbo.server.EntityCache.add(EntityCache.java:327)
oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:1762)
oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:2151)
oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1070)
oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:2943)
oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2841)
oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203)
oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2594)
oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:4960)
oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:1901)
oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:1891)
oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:6555)
com.samesi.segestion.view.backing.app.Clientes.devoluciones_action(Clientes.java:1845)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
oracle.adf.view.faces.component.UIXCollection.broadcast(UIXCollection.java:94)
oracle.adf.view.faces.component.UIXTable.broadcast(UIXTable.java:205)
javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
javax.faces.webapp.FacesServlet._service_79(FacesServlet.java:197)
javax.faces.webapp.FacesServlet.service(FacesServlet.java)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
java.lang.Thread.run(Thread.java:595)Tranks,

I continued researching. When my server gain cpu and memory in Catalina.out, I can to see this output:
Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache encodeBegin
INFO: fragment is Facturacion.jspx:_id3
Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache getFragmentFromCache
INFO: fragment (Facturacion.jspx:_id3) fetch: cache miss
Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache insertFragmentInCache
INFO: fragment (Facturacion.jspx:_id3) insert: cached for 864000 secs
Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache encodeBegin
INFO: fragment is Facturacion.jspx:_id4
Feb 28, 2008 10:25:53 AM oracle.adf.view.faces.webcache.component.UICache getFragmentFromCache
INFO: fragment (Facturacion.jspx:_id4) fetch: cache missIn this example, I belive that user is resuming the Facturacion.jspx page. In my code I have this line:
It’s corresponding to menu.
I have looking this documentation:
http://download.oracle.com/docs/html/B25947_01/web_cache002.htm
In this documentation, first access, the cache miss, but the following times the cache could hit. . When my server gain cpu and memory I look that the following times the cache always miss in all pages. Subsequently tomcat no reply and the malicious thread, execute Armageddon trace. This behavior of the cache is strange, right?
I’m sure that I’m making anything that fetch in queryCollection make big loop.
I have redefining getRangeSize and CurrentRow of my CustomViewObject (all viewOjects about my applications extends CustomViewObject and CustomViewObject extends viewObject) and I looked correct rangesize (not -1). I got system.out.println(getFetchedRowCount()) in createRow and obtain 13 or 15. I belive that It’s correct.
Another example of problematic trace is (in this case is in preparemodel):
com.sun.java.util.collections.ArrayList.indexOf(ArrayList.java:201)
com.sun.java.util.collections.ArrayList.contains(ArrayList.java:183)
oracle.jbo.server.ViewRowCache.addWithCheck(ViewRowCache.java:351)
oracle.jbo.server.ViewRowCache.add(ViewRowCache.java:409)
oracle.jbo.server.QueryCollection.addRowToColl(QueryCollection.java:2069)
oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2111)
oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:2612)
oracle.jbo.server.ViewObjectImpl.activateCurrentRow(ViewObjectImpl.java:12360)
oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3768)
oracle.jbo.server.ViewRowSetIteratorImpl.getRangeSize(ViewRowSetIteratorImpl.java:627)
oracle.jbo.server.ViewRowSetImpl.getRangeSize(ViewRowSetImpl.java:2251)
oracle.jbo.server.ViewObjectImpl.getRangeSize(ViewObjectImpl.java:6065)
oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1549)
oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1420)
oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1403)
oracle.adf.model.binding.DCIteratorBinding.setRangeSize(DCIteratorBinding.java:2641)
oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:2484)
oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2257)
oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:104)
com.samesi.segestion.view.frameworkExt.SegestionPageLifecycle.prepareModel(SegestionPageLifecycle.java:354)
oracle.adf.controller.v2.lifecycle.Lifecycle$8.execute(Lifecycle.java:210)
oracle.adf.controller.v2.lifecycle.Lifecycle.executePhase(Lifecycle.java:116)
oracle.adf.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java)
oracle.adf.controller.faces.lifecycle.ADFPhaseListener$4.after(ADFPhaseListener.java:331)
oracle.adf.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:97)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:254)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
java.lang.Thread.run(Thread.java:595)Thanks,

PS and CPU fan comes on merely by plugging in AC power

I am repairing a friends Athlon xp machine and have tested everything with extras.
I put a new MSI KM4M-V board in. The pc runs xp fine, etc., etc., however, when shut down the pc, Windows shuts down, but the ps and cpu fan stays on. Indefinitely. I have to either flip the on/off switch on the back of the ps or pull the damn plug.
What gives?
When I plug the thing in cold, same thing; the fans come on and then I press the start button whenever I want and the system posts and boots normally.
A motherboard Short? I checked the switch and even pulled the connector; the fans still come on when I plug it in.
Any thoughts?
Thanks.
J Romulus

Yes, I've let it run for hours after Windows shuts off, it simply doesn't go off.
Simply plugging it in or flipping ps switch, the same thing; ps and cpu fans come on automatically.
I've read all the APIC threads; if I were strictly having problems shutting down, maybe it be that. But it is so strange that it does it from a cold start.
Got to be some kind of short, or else a bad board.

Hyper-V Resource Pools for Memory and CPU

Hi all,
I'm trying to understand the concepts and details of resource pools in Hyper-V in Windows Server 2012. It seems as if there is almost no documentation on all that. Perhaps somebody can support me here, maybe I've not seen some docs yet.
So far, I learned that resource pools in their current implementation serve mainly for metering purposes. You can create pools per tenant and then group VM resources into those pools to facilitate resource metering per tenant. That is, you enable metering
once per pool and get all the data necessary to bill that one customer for all their resources (without metering individual VMs). Is that correct?
Furthermore, it seems to me that an ethernet pool goes one step further by providing an abstraction level for virtual switches. As far as I've understood you can add multiple vSwitches to a pool and then connect a VM to the pool. Hyper-V then decides which
actual switch to use. This may be handy in a multi-host environment if vSwitches on different hosts use different names although they connect to the same network. Is that correct?
So - talking about actually managing that stuff I've learned how to create a pool and how to add VHD locations and virtual switches to a pool. Enabling resource metering for a pool then collects usage data from all the resources inside that pool.
But now: I can create a pool for memory and a pool for CPU. But I cannot add resources to those. Neither can I add a complete VM to a pool. Now I'm launching a VM that belongs to a customer whose resources I'm metering. How will Hyper-V know that it's
supposed to collect data on CPU and memory usage for that VM?
Am I missing something here? Or is pool-based metering only good for ethernet and VHD resources, and CPU and memory still need to be metered per VM?
Thanks for clarification,
Nils
Nils Kaczenski
MVP Directory Services
Hannover, Germany

Thank you for the links. I already knew those, and unfortunately they are not matching my question. Two of them are about Windows Server 2008/R2, and one only lists a WMI interface. What I'm after is a new feature in Windows Server 2012, and I need conceptional
information.
Thanks for the research anyway. I appreciate that a lot!
In the meantime I've gotten quite far in my own research. See my entry above of January 7th. Some additions:
In Windows Server 2012, Hyper-V resource pools are mainly for metering purposes. You cannot compare them to resource pools in VMware.
A resource pool in Hyper-V (2012) facilitates resource metering and billing for VM usage especially in hosting scenarios. You can either measure resource usage for single VMs, or you can group existing resources (such as CPU power, RAM, virtual hard disk
storage, Ethernet traffic) into pools. Those pools will mostly be assigned to one customer each. That way you can bill the customer for their resource usage in a given time period by just querying the customer's pool.
Metering only collects aggregated data with one value per resource (i.e. overall CPU usage, maximum VHD storage, summed Ethernet traffic and so on). You can control the time period by explicitly resetting the counter at any given time (a day, a week, a
month or what you like).
There is no detailed data. The aggregate values serve as a basis for billing, not as monitoring data. If you need detailed monitoring data use Performance Monitor.
There is currently only one type of resource pool that adds an abstraction layer to a virtualization farm, and that is the Ethernet type. You can use that type for metering, but you can also use it to group a number of virtual switches (that connect to
the same network segment) and then a VM connected to that pool will automatically use an appropriate virtual switch from the pool. You need no longer worry about virtual switch names across multiple hosts as long as all equivalent virtual switches are
added to the pool.
While you can manage two types of pool resources in the GUI (VHD pools and Ethernet pools) you should only manage resource pools via PowerShell. Only there will you be able to control what happens. And only PowerShell provides a means to start, stop, and
reset metering and query metering data.
The process to use resource pools in Hyper-V (2012) in short:
First create a new pool via PowerShell (New-VMResourcePool). (In case of a VHD pool you must specify the VHD storage paths to add to the pool in the moment you create the pool.)
In case of an Ethernet pool add existing virtual switches to the pool (Add-VMSwitch).
Reconfigure existing VMs that you want to measure so that they use resources from the pool. The PowerShell
Set-VM* commands accept a parameter -ResourcePoolName to do that. Example:
Set-VMMemory -VMName APP-02 -ResourcePoolName MyPool1
Start measuring with Enable-VMResourceMetering.
Query collected data as often as you need with Measure-VMResourcePool.
Note that you should specify the pool resource type in the command to get reliable data (see my post above, Jan 7th).
When a metering period (such as a week or a month) has passed, reset the counter to zero with
Reset-VMResourceMetering.
Hope that helps. I consider this the answer to my own question. ;)
Here's some links I collected:
http://itproctology.blogspot.ca/2012/12/hyper-v-resource-pool-introduction.html
http://www.ms4u.info/2012/12/configure-ethernet-resource-pool-in.html
http://blogs.technet.com/b/virtualization/archive/2012/08/16/introduction-to-resource-metering.aspx
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/1ce4e2b2-8fdd-4f16-8ab6-e1e1da6d07e3
Best wishes, Nils
Nils Kaczenski
MVP Directory Services
Hannover, Germany

4890 cyclone oc and cpu

Similar Messages

Maybe you are looking for