49 - Invalid Credentials vs. 50 -Insufficient Access

Need help understanding the difference between error codes
49 - Invalid Credentials and 50 -Insufficient Access
I'm getting a 50 - Insufficient Access when I'm in a "chaining" process and receive it on the target server. I've followed the instructions for chaining and am in need of some help. Also, where can I go to get detailed explanations for the error codes. My Admin manual does not do a good job of explaning.

These are ldap result codes and actually imply what they are saying. To simplify think of these as
49 - incorrect password
50 - permission denied
With regards to chaining, have you looked at the documenation and followed all the required steps such as creating the proxy identity and required ACI's on the target/remote server?
http://docs.sun.com/source/817-7613/suffixes.html#wp19889
An explaination of the ldap result codes can be found here
http://docs.sun.com/source/817-6707/resultcodes.html
Regards,
-Wajih

Similar Messages

SAP PI problem: User credentials are invalid or user is denied access

Hi!
I am about to configure SAP PI.
Therefore I have run post installation wizard step PI_00 and get the following errors:
Error: Not able to load Function SWF_XI_BPM_AUTO_CUSTOMIZE
(cause:Name or password is incorrect (repeat logon)).
Step: Execute SWF_XI_BPM_AUTO_CUSTOMIZE
Error: User credentials are invalid or user is denied access
Step: Add Installed Product2
Questions:
How can I identify which user/password makes problems here?
P.S.
My further problems are:
2) It is not possible to work with XI tools, such as:
Integration Directory, Integration Repository, Runtime Workbench
When I try to execute some action in these tools I get the following error:
Cannot connect to Repository
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access.
2) When I try to access the NetWeaver configuration wizard (http://localhost:50000/nwa)
I get the followign warnig:
System Landscape Directory is not available
Only local systems can be maintened
Thank you very much
Thom

Hi,
Check the similar discussion Error in PI postinstallation wizard
Wrong password PISUPER in PI_00 wizard
Thanks!
Edited by: Sudhir Tiwari on Nov 26, 2008 10:29 AM

Could not connect to Orchestrator web service - Unauthorized: Access is denied due to invalid credentials

I am trying to set up the Orchestrator Connector for Service Manager, when running the test, I get the error
<h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
<h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
The account I am using is the system account for Service Manager. I have added that account to the local admin group on the Orchestrator server as well as the Orchestrator admin group. But to no avail.
Now when I am logged on to the Orchestrator server locally with my account, I can access the Orchestration Console with no problem, however when I try to connect to it remotely using my account, it will not accept my credentials. I need to sort this out,
can anyone help?
Paul Arbogast

I found the solution, using the IIS Manager I changed the Windows authentication providers by moving NTLM above negotiate.
Paul Arbogast

Invalid Credentials: The Network location cannot be reached

I am working with MDT 2010, and I am getting the error, "Invalid Credentials: The Network location cannot be reached." When I run the LiteTouch 64 bit, I don't think the network is working. It's like there is not driver for the network card in
the LiteTouch 64 bit to make the network connection. When I hit F8 key, it brings a DOS box up for testing, and I found out these things.
- I can ping the loop back address 127.0.0.1.
- Cannot use the net use command to connect to the server share \\server01\DeploymentSahre$.
- I can not ping by name or IP address the server that is holding my Deployment Share.
This is the first time I am working with this technology, and I was following a guide off the Technet library. It almost like I am missing the driver for the network card. I have Windows Deployment installed on server01, the server will answer,
and I am able to put in my user name and password, it accepts and starts loading.
I did figure out how to inject the network drivers into Windows Deployment for the Motherboard I was using, do I have to do the same thing here again? MDT is using the Windows Deployment Images on the server01; MDT is setup on server01. I would have
thought that since the driver was already injected into the Image MDT would use that as well. So, do I need to put a driver into the LiteTouch 64bit image and if I do how do I do that?
thanks very much for your help,
Rick Arnold
ArnoldConsult
Rick Arnold Arnoldconsult, MCP

If you haven't updated the deployment share after adding the proper drivers to OOBD then your LiteTouch boot images will not have them included. Just right click the deployment share and click on Update Deployment Share, it will take a while but it
will rebuild the boot images with the drivers you've included in OOBD. Then it's just a matter of either recreating the flash drives or loading the updated image into WDS.
Another thought:
We had an issue with some HP's that had Main Boards replaced. the BIOS time was WAY off and the UUID wasn't setting itself because the network was denying it access to our servers (because of the horribly wrong time). Once we corrected the time
in the BIOS everything ran fine. The error we got while trying to do the deployment was the same as what you describe and we could still ping various machines on the network too.

Suppress HTTP Authentication dialog for invalid credentials

If I want a custom login screen with domain, username and password fields for my AIR application, that uses Basic Authentication on the server, I can use
<code>
URLRequestDefaults.setLoginCredentialsForHost(myDomain, myUsername, myPassword);
</code>
and it works fine. But if I enter invalid credentials, the "built-in" authentication dialog pops up. How can I suppress that? I read somewhere that I could use URLRequestDefaults.authenticate = false; but that just seems to kill the authentication process altogether.
Any ideas?

No, that's not the case. I am talking about the user authentication dialog that is shown whenever you access a member restricted web site.
Through Java, we can pass the user name and password values if we know, and the dialog will not be shown. But, I face the problem in NS 4.7x.
-JP

Invalid Credentials when trying to login to iPrint iOS App

I've recently setup a fresh install of the iPrint Appliance 1.1 and installed all security patches.
Original setup was iPrint appliance was SSL but syncing to our edirectory server was not, and I was unable to login with the iOS app. This was in Evaluation mode so I am unsure if the password being encrypted over SSL from the appliance then trying to match on the eDir server not on ssl caused that issue.
However I then installed our license, and configured LDAP sync to be over SSL, but I am still gettin the same "Invalid Credentials" message. That being said, our current license only entitles us to the appliance and iprint desktop, not iPrint Mobile whereas when in evaluation mode you have access to iPrint Mobile.
My question here is, should I be expecting it to say "Invalid Credentials" even though I do not have any iPrint Mobile licenses, or should there be a different message or result?
Thanks!

mojeda92,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

LDAP error "ldap_bind: Invalid credentials (49)"

Dear Server professionals
I run in an error "ldap_bind: Invalid credentials (49)" eatch time I try to import a ldif file. Below I wrote my slapd.conf file and my command I use.
slapd.conf file:
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/misc.schema
include /etc/openldap/schema/samba.schema
include /etc/openldap/schema/fmserver.schema
include /etc/openldap/schema/apple.schema
include /etc/openldap/schema/netinfo.schema
# Define global ACLs to disable default read access.
# Do not enable referrals until AFTER you have a working directory
# service AND an understanding of referrals.
#referral ldap://root.openldap.org
pidfile /var/run/slapd.pid
argsfile /var/run/slapd.args
replica-pidfile /var/run/slurpd.pid
replica-argsfile /var/run/slurpd.args
replicationinterval 3
loglevel 32768
sizelimit 11000
gentlehup off
schemacheck on
allows bind_v2
schemacheck on
checkpoint 32 30 # <kbyte> <min>
database bdb
directory /private/var/db/openldap/openldap-data
suffix "o=machilfe,c=ch"
#rootdn "cn=ldapadmin,o=machilfe,c=ch"
#rootpw {SSHA}c1lrRr4xWi444e59Vez96XkohS7fTiwU
# Indices to maintain
index default pres,eq
index objectClass eq
index cn,sn,uid
# Sample security restrictions
# Disallow clear text exchange of passwords
# disallow bindsimpleunprotected
# Require integrity protection (prevent hijacking)
# Require 112-bit (3DES or better) encryption for updates
# Require 63-bit encryption for simple bind
# security ssf=1 update_ssf=112 simple_bind=64
# Sample access control policy:
# Allow read access of root DSE
# Allow self write access
# Allow authenticated users read access
# Allow anonymous users to authenticate
# Directives needed to implement policy:
#access to dn.base="" by * read
#access to *
# by self write
# by users read
# by anonymous auth
# if no access controls are present, the default policy is:
# Allow read by all
# rootdn can always write!
# Some settings are maintained in slapd_macosxserver.conf,
# which is updated by Server Admin. Put your own changes in
# this file.
include /etc/openldap/slapd_macosxserver.conf
include /etc/openldap/schema/abxldap.schema
Command:
sh-3.2# ldapadd -c -D "cn=diradmin,o=machilfe,c=ch" -W -x -f /Users/ladmin/Desktop/AddressBook\ X\ LDAP\ Installation/Examples/InitialImport.ldif
Enter LDAP Password:
ldap_bind: Invalid credentials (49)
Can anyone help me to solve this problem or where to look for this to solve?
Kind regards
Thomas Thaler

Make sure your dn value is correct. i.e cn=diradmin,o=machilfe,c=ch

Ldapmodify returns Invalid Credentials

I have a peculiar problem with my SUN Directory Server 5.2 P4 deployment. I am able to login into the Admin console with the directory manager credentials. However when I using the same credentials for a ldapmodify operation it fails giving me a Invalid Credentials error.
$ ldapsearch -h <LDAPHost> -p <LDAPPort> -D "cn=Directory Manager" -w <password> -b uid=some_uid,ou=people,dc=example,dc=com objectclass=*
ldap_simple_bind: Invalid credentials
The access logs give a err=50 which means a Invalid password, but am using the right password.
I have mulitple instances of Directory Server running on this machine. Each Directory has a virtual IP assigned to it so that external clients can connect.
Thanks in Advance.

By any chance, would the directory manager credentials contain any special, non-ascii, non-7bit character ?
The character set used by Java is unicode and transcoded in UTF-8
The ldapsearch tool uses the charset and locale specified by your environment. Which is probably not UTF-8...
Aa passwords are supposed to be treated as binary blobs by the directory server, and the clients are providing different representations of it, one works, the other ones don't.
Regards,
Ludovic.

"Invalid Credentials (Failure)"

Hey folks,
I've seen a couple posts about this but they either haven't been resolved or the help wasn't helpful...I've had my iPhone for a month or two now, and everything was working perfectly, until last night when I went to refresh my inbox and got the "Cannot access mail: Invalid Credentials (failure)" error warning. Not cool.
Any help, my Apple gurus???
Meg

A Gmail account can be accessed as an IMAP or POP account.
Did you use the Gmail account preset when creating the account on your iPhone?
If so, the account was created as an IMAP account on your iPhone, and the available IMAP Path Prefix also indicates this.
EDGE is at&t's data or internet network - which is accessed via at&t cellular network with the iPhone. The iPhone can connect via an available wi-fi network (which is much faster access), or via at&t's EDGE network, which is much slower than wi-fi. If you have access to an available wi-fi network, I recommend using it. The iPhone will switch automatically between an available wi-fi network you have previously accessed with your iPhone, and at&t's EDGE network.
I would try deleting and manually creating the account on your iPhone. Using the Gmail account preset when doing so automatically creates the account as an IMAP account, and no messages will be lost since all remain on the server - including sent messages.

Invalid credentials report LMS

Hi there,
I want to know if there is a way to show invalid attempts to access to my different equipements on LMS.
For example, Show an alarm each time someone tries to access to a switch with an invalid credentials.
Thank you in advance

for failed login attempts to the switches, configure the following in global config mode:
login on-sucess log
login on-failure log
and you should get syslog messages on succesfull and failed login attempts.
Additionaly, you can define an automatic action on this specific syslog message to send you and e-mail based on this message

Cannot set up hotmail account "setup could not finish, error in login, invalid credentials"

Two weeks ago I started getting messages to log back into one of my hotmail accounts that I had set up on my droid charge at the 'email icon'( I had 3 hotmail accounts and 1 gmail account setup there)
once I logged the password back in it worked again, but it began requesting that I log back into the account more and more frequently
Customer service recommended that I remove the account and then set it up again, I did this and it would not allow me to set it up again-"setup could not finish, error in login, invalid credentials"
I tried removing all acounts and then setting them up again, still could not set up the one hotmail account (same message)
Verizon store decided that I needed to 'wipe' my phone completely, after they wiped it two of my hotmail accounts refused to be set up (same error message)
I tried changing the passwords going to the accounts online on my computer (I can access all the accounts online)
Customer service stated that it must be the phone and sent me a refurbished phone, the refurbished phone is doing the exact same thing with the exact same error message
Any ideas?

matthewclaxton wrote:
Two weeks ago I started getting messages to log back into one of my hotmail accounts that I had set up on my droid charge at the 'email icon'( I had 3 hotmail accounts and 1 gmail account setup there)
once I logged the password back in it worked again, but it began requesting that I log back into the account more and more frequently
Customer service recommended that I remove the account and then set it up again, I did this and it would not allow me to set it up again-"setup could not finish, error in login, invalid credentials"
I tried removing all acounts and then setting them up again, still could not set up the one hotmail account (same message)
Verizon store decided that I needed to 'wipe' my phone completely, after they wiped it two of my hotmail accounts refused to be set up (same error message)
I tried changing the passwords going to the accounts online on my computer (I can access all the accounts online)
Customer service stated that it must be the phone and sent me a refurbished phone, the refurbished phone is doing the exact same thing with the exact same error message
Any ideas?
When you setup the accounts, are you using the automatic or manual method to set them up?

Cannot get mail - invalid credentials (failure)

i have just purchased an iphone and tried to configure gmail on it, using the procedures given on the gmail site (https://mail.google.com/support/bin/answer.py?answer=77702).
i receive the following error:
Cannot get mail
Invalid Credentials (failure)
I have tried:
adding another users account (my friends) - worked
changing my password so it doesnt have any uppercase or numbers - failed
using wifi and edge seperately - failed
The only major difference i can see between his account and mine is that my user name contains a . such as: [email protected]
i am at odds as to why i cant access my gmail account via the iphone when my mates works on my phone.

Hey dpark,
The link you posted is for setting up IMAP GMail account on the iPhone. Make sure you first setup your GMail account for IMAP.
http://mail.google.com/support/bin/answer.py?answer=77695
They also have a YouTube video linked from this page:
http://mail.google.com/mail/help/intl/en/about_whatsnew.html
Jason

Remove ACI failure: Invalid credentials

# ldapmodify -h hostname -p 1389 -D "cn=Directory Manager" -w Password
dn: o=testdemo.com
changetype: modify
delete: aci
aci: (targetattr="dspswuserlink || dspswloop || dspswvalidate")(version 3.0; acl "deny write access to dspswuserlink, dspswloop, dspswvalidate"; deny(write) userdn="ldap:///self";)
modifying entry o=testdemo.com
ldap_modify: Invalid credentials
ldap_modify: matched: o=testdemo.com

It looks like the "Invalid Credentials" message appears after you have submitted the modification. The best explanation I have for this is that your ldapmodify is getting and following a referral, likely to a server with different rootdn credentials.
Depending on the ldapmodify tool you are using, you may be able to prevent it from following referrals. The Sun tool had the "-R" option for this. Using the verbose argument may also give you information about which server you are getting the referral to.

MDT user credentials error: Invalid credentials: The network path was not found

I have DELL E5400 and DELL Optiplex 760 pc. In the before, DELL630 is working with my MDT service, but now, DELL E5400 and DELL Optiplex 760 not working with my MDT.
When PE loaded and go to User Credentials interface, I input the user name and password(I confirm the user name and password is correct), it will display error message "Invalid credentials: The network path was not found". I checked that the network driver is correct.
After search some information in the website, someone said that maybe the network initializing timeout issue, so I according to Tim Quan guide to add following to startnet.cmd
wpeutil InitializeNetwork
ping localhost
wpeinit
Then I update the deploy location in MDT and then re-loaded it again, but unlucky, I still meet the same issue. I tried to use ipconfig /all command to check the network status, I couldn't find out local network connection. I click "Cancel" to check the error message, it will display"A connection to the deployment share could not be made. The deployment will not proceed. DHCP lease was not obtained for any networking device!Possible cause: check physical connection".
It seems that PE not loaded network driver successfully, but it is very strange that the network driver is correct.
Have someone can help me?
Thanks a lot

Hi,
Are you deploying Windows Vista 32bit or 64bit? Please obtain he latest network card drivers from the following sites:
Dell Latitude E5400:
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=
Dell OptiPlex 760:
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PLX_760&os=WLH&osl=en&catid=&impid=
Please make sure you add the correct network driver to deployment point.
Additional Information:
http://www.techtalkz.com/windows-deployment/501217-deployment-share-connection-issue-since-mdt-2008-waik-1-1-a.html
http://www.deploymentforum.com/Community/Forums/tabid/124/forumid/16/postid/737/view/topic/Default.aspx
Hope it helps.
Tim Quan - MSFT

Scan to Email not working - Invalid Credentials error (using gmail and 2-factor authentication)

I configured the HP OfficeJet 8600 printer for scan to email using the Embedded Web Server interface. In the Web interface, I added/entered an email address for my gmail account, and set the correct SMTP server details, and entered 465 for the port number. I checked the "Always use secure connection" box, as well as the "SMTP requires authentication for outgoing email messages" box. I entered correct SMTP user ID and password. Yet when I did a test, I got an error "Invalid credentials" After a lot of frustration, and trying all sorts of things, I eventually got the idea to try another email account. This time I tried a different email account, a netzero email account, configured the smtp server details for it etc. And this time when I tested the netzero email address it worked. I tried the scan to email on the printer, and it worked for the Netzero email account. it just didnt work for the gmail account. I had a while back turned on 2-factor authentication. I went to gmail settings and requested an "App password" for my HP printer. Google/gmail displayed a 16 character password, which I then entered into the password box in the HP OfficeJet printer Embedded Web Server interface (instead of my usual password), for the gmail account. And this time when I tested the email account - it worked! Problem solved! .. I share this just in case anyone else is having the same problem I had, and is going through the same frustrating experience I endured!

Thank you. This helped TREMENDOUSLY!

49 - Invalid Credentials vs. 50 -Insufficient Access

Similar Messages

Maybe you are looking for