4900M does it work with X2 and SFP mixed together?

I would like to build 4900M with the following interfaces.
11 x 10G X2
11 x SFP MultiMode.
Is possible to populate above mix and match for 4900?
4900M have two slots,
1st slot -> 8 ports 10G line card
2nd slot -> 8 ports 10G line card
Another question is is okay to mix X2 and Cisco TwinGig Converter together at 8-Port (2:1) 10 Gigabit Ethernet (X2) Half Card ?
Thank you in advance,
John

Hi,
X2 is supported on 4900m switches. Mixing should work as well because the twingig works as a 10G transceiver.
Please visit the following links for more information:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_15594.html#wp16938
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html#wp55804
Best regards,
Andras

Similar Messages

HT4882 hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

Hello Kian,
This may sound silly but if you put your hand over the isight camera, do the lights change on the keyboard?
Ryan

Dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

This cart reader is a kind of multi card reader and you can use different cards with it. In my opinion every multi device should be used very, but very gently. I do not know what happened exactly in your case but maybe you have damaged something inside.
Try to restart your notebook and use other SD card to check if everything works well. Please do it very gently and if you see something is wrong stop with inserting the card.
I use 1 GB SD card on my A200 without any problems.
In my opinion you should check notebook by technician.
Bye and good luck!

Airplay does not work with slideshows and music - get the slides but no music with iPad Air2 and ios 8.1.22

iPad Air 2 with celluar with ios8.1.2 will not airplay with apple tv slideshows with music. I see the slides on the TV but do not hear the music. This works on the iphone 5s with iOS 8.1.2 and with my other iPad which is on iOS7.
This problem was reported on Nov 21, 2014 and other people had reported it prior to me.
When will this be fixed by Apple - it worked in the past and does not work now.
Should i return my iPad Air 2 and get my money back?

Problem seems to be resolved. Should have thought of it myself ;-) thanks so far!

Apple Tv does not work with youtube and movies on iphone or ipad

I am on my 2nd generation apple TV. Always worked with Youtube, my iphones and ipads and Netflix.
I think it started about a month ago. I can only use Netflix.
If I try YouTube and select a video (even if small) it just keep spinning and never starts.
The same thing happens with my video from iphone 5S, 5, and ipad 2.
Than I went to my sons house with a Apple TV 3rd generation and different wifi,
same thing happens, I can not show a video from my iPhone 5S.
What is going on, did Apple TV change something?
Is this a update that went wrong?
(I have auto update and also checked manually to make sure have latest apple TV FW)
(All iphone and ipads are latest FW).

Hi pcorsaro,
You may need to restore your Apple TV and see if the issue is resolved after that process:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/ht4367
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Does RMAN Work With DataGuard And Restore Points?

I only have a basic experience of RMAN on a training course and no experience of Data Guard.
We have an 11g set up where DataGuard is keeping production and DR in sync.
On a release weekend we want a rollback strategy in case any of the config goes wrong.
When the database was small and before we were using DataGuard this just consisted of datapump.
Now the database is 120GB that isn't an option in our timescale.
Can I set a restore point and use archive logs to keep track so that if there is a problem and we need to roll back we can just rollback to the restore point?
Would this work or would it cause problems with DataGuard?
Is rolling back to a restore point a relatively fast operation?

DataGuard works with Restore Points. The use case is when
a. You created a Restore Point for the Primary and Standby
b. You upgraded the Primary
c. You find a fault with the Primary
d. You revert both the Primary and the Standby to the Restore Point and resume DataGuard.
Hemant K Chitale

Flash Player Does Not Work with IE8 and Windows XP

I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1)      Update your Windows software
a.       Follow the steps below to view updates that are available for your computer.
                                                   i.      Click to go online to the Windows Update website
1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                 ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1.       High Priority
2.       Software, Optional
3.       Hardware, Optional
                                                iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
b.      What do I do if Microsoft Update is not installed?
                                                   i.      Follow the steps below to install Microsoft Update and check for updates.
1.       Click to go online to the Windows Update website
2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3.       Review the license agreement, and then click Continue.
4.       After setup is complete, click Check for Updates.
5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a.       High Priority
b.      Software, Optional
c.       Hardware, Optional
6.       Select the updates you want, click Review and install updates, and then click Install Updates.
2)      Turn off Internet Explorer add-ons you don't recognize
a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b.      How do I spot malicious add-ons?
                                                   i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1.       Blank names.
2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3.       A publisher name you might not recognize.
c.       How do I disable an add-on?
                                                   i.      Open Internet Explorer.
                                                 ii.      Depending on your version of Internet Explorer, do one of the following:
1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4.       Follow these steps to determine the version of Internet Explorer you're using:
a.       Open Internet Explorer.
b.      Press ALT+H, and then click About Internet Explorer.
c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                            i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2.       Right-click iexplore, click Properties, and then click Version.
3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                            i.      How do I update to the latest version of Internet Explorer?
1.       Click to download and install the latest version of Internet Explorer
                                                                                                                          ii.      How can I update Internet Explorer without launching my web browser?
1.       Click to go online to the Windows Update website.
2.       Click Custom to check for available updates.
3.       In the left pane, under Select by Type, click Software, Optional.
4.       Select the Internet Explorer update, and then click Review and install updates.
                                                iii.      Click the name of the add-on.
1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2.       Why do some add-ons include (Not verified) in the Publisher column?
a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3.       How do I disable an add-on if I can't access Internet Explorer?
a.       Click Start, and then click Control Panel.
b.      Double-click Internet Options.
c.       Click the Programs tab, and then click Manage Add-ons.
d.      Click the name of the add-on you want to disable, and then select Disable.
e.      When the Add-on Status dialog box appears, click OK to close it.
3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                   i.      http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
a.       Close all Internet Explorer windows.
b.      Click Start, and then click Control Panel.
c.       Click Network and Internet Connections, and then click Internet Options.
d.      Click the Programs tab, and then click Manage Add-ons.
e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f.        Click OK.
g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

How does metadata work with Bridge and Premiere?

We are trying to figure out how to start using metadata with bridge. But it doesnt seem to work. I can load an avi file into premiere and change the metadata fields for description or scene or log or whatever, when i load it into premiere i see that data, when i look at it in bridge i don't see any of the metadata.
I can go into bridge and edit the metadata for a file. and when i look at it in bridge it is always there. but looking at that same file in premiere there is no metadata there.
we have 8 premiere workstations on a fibrechannel network solution we edit with. we want to have about 5TB of stock video clips available with metadata that every machine can search and use in projects.

I know nothing about Premiere, but perhaps they use different methods to store data. With Bridge it puts the metadata on the file. With some programs like PS Elements it puts the metadata in a table. With PSE one can select "write metadata to file" and solve problem. Check with Premiere to see how data is stored.
If you are entering keywords a good check is to look with Windows Explorer and see it there are any "tags" listed after entering it in Premiere. WE and Bridge read the same.

How can I uninstall I.E. 11? and install I.E. 10? 11 does not work with Sharepoint and other applications

Windows Technical Preview for Enterprise does not give me an option to uninstall I.E. 11 or it does not list it as an update in installed updates. HELP! I need to be able to work in Sharepoint! Any help is appreciated.

Hi astexas,
I would add some information:
Uninstall Internet Explorer 11 is possible, but install an Internet Explorer 10 is not an option in Windows 10 Technical Preview, due to this is no such update existed for Windows 10 Technical Preview.
Alex Zhao
TechNet Community Support

Does Skype work with Mac

Does skype work with mac

Hi and welcome to the Skype Community,
Yes, it does. Please take a look here: https://support.skype.com/en/faq/FA12015/getting-started-with-skype-mac
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Polarioid pogo printer not working with ipad and iphone

And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo. Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind. This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
I come from a photograpic background. I got the Pogo as soon as it came out. I quite literally was on Polaroid's website every day checking to see when I could order it. Having "instant" sticker prints is wonderful at family picnics with all the kids. While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released. So I took that as the sign that it was probably never going to happen. (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me. But, yes, it would be nice.)
I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints. Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340. But it's still Bluetooth only. So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon. IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing. But considering Polaroid's financial issues, I'm not holding my breath

Does itunes work with the new intel core duo processor?

i want to go buy a new laptop and the one I have in mind has the new intel core duo T2300 or the T2400 processor. Can i still download itunes onto this computer? Does it meet the requirments becuase the download page says you need a pentium or BETTER? The new macs are putting them in their computers, but will the windows and intel duo be able to support the itunes application?

are you asking if it is compatible meaning will it
install/run or are you asking if flash is
optimized to take advantage of this particular setup?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
BAT06 wrote:
> I am currently looking at up grading to a new pc but
have heard that the new
> Intel Core Duo Processor isn't compatible with Flash or
Studio 8?
>
> Has anyone got a PC running with an Intel Core Duo
Processor, and if so does
> it work with Flash and or Studio 8?
>

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

Hi All,
It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
Is there any way around this if i want to use the 2 at the same time?
How does this work with SharePoint 2013 as i would be doing some migrations?
Cheers in Advance

Hi,
As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
After you choose one of them, you can open the site.
https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
So I think there are some other reasons to cause the issue.
Check these things below:
1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
Settings > SharePoint Designer > ensure Enable SharePoint Designer
is selected).
3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
More references:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
Best regards
Sara Fan
TechNet Community Support

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

4900M does it work with X2 and SFP mixed together?

Similar Messages

Maybe you are looking for