4G and WiFi on at the same time

Ever since I updated to Lollipop my phone shows the 4G lte on at the same time as my device is connected to a WiFi connection (and no, not greyed out). This is particularly annoying in my apartment where it doesn't connect to the internet with the WiFi and there is internet access since I can use other devices.
I am never sure if it is using my data or WiFi.
I already did a Factory Reset and it didn't work.
Anybody else having the same issue? Any solutions?

When the arrows move, data is moving. My last phone and current both would have data off, no arrows moving, but MMS would go through fine. I also had minimal, but still data was used for system updates and other system checks as displayed by a 3rd party data monitor and the phones data monitor. My data was off for 3 weeks and I had a 50-55 MB useage attributed to system update and another app that almost every major carrier has on every Android which is used by each to update phones and perform other tasks. Without this app, the phones will not update. It is from a private company which sells this software to the carriers under the idea that a uniformed update system makes it easier to assist customer remotely and auto add-remove apps from users systems if the carrier sees fit. The carrier has the manufacturer program the app into its own version of Android.

Similar Messages

Can I have my Time Capsule wifi and my Verizon router wifi on at the same time?

I want to have my verizon wifi on at the same time as my time capsules wifi but I don't know if it interfere. There's an app that you can use as a remote for your cable box but you need to be on your routers wifi.
Thanks,
Zach

Suggest that you run a few speed checks on both wireless networks with a computer in same room as the wireless router using a site like www.speedtest.net on your browser.
If you are getting close to your plan speeds, then you likely do not have interference issues.
Most routers will scan to find the best available channel to use, so assuming that your equipment is working OK, things should be OK. Try to keep the Verizon router and Time Capsule at least 6-8 feet, or a few meters from each other.
This assumes that you are not living in a crowded situation like an apartment complex, where intereference is pretty much a fact of life due to the very limited number of wireless channels that are available.

WIFI AND 4G on at the same time

I received a software update yesterday and after it started show my WiFi connection and 4GLTE symbols at the same time. Does this mean they are both running eating up my data plan? and it seems they both are transferring data at the same time according to the green/orange arrows. It this a bug or part of the upgrade?

thanks for the suggestion on Caller id. now my note 3 has decided to not handle email.... freezes and gets really really hot to touch... called TS they advised me to swap phone ASAP and not to use it until I do.... might be a safety issue.... happy days.... sometimes technology sucks......LOL... heads up if your phone freezes gets real hot..... internal issue no fix return!!!!!!!

Connecting Micro USB and HDMI cables at the same time

I need to be able to use a Micro USB and HDMI cable at the same time to configure ATV to connect to WPA2-Enterprise secure WiFi network. I'm using Apple Configurator to do this. Because of the poor hardware design, it isn't possible to connect both the Micro USB and HDMI cables at the same time. Does anyone have a worrkaround to resolving this issue?
I saw a similar post about this problem in the forums dating back to April 2013 with no real solution. It's been over a year now and I'm hoping someone has found a workaround to this problem. I have a bunch of ATVs that I need to configure for our classrooms.
Thanks!
MG

For what reason do you believe this is necessary?
How to Install a Configuration Profile: http://support.apple.com/kb/ht5437

Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
So here is a summary:
BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
BT mouse and BT keyboard / Wifi OFF ----> works fine
Only BT keyboard / Wifi ON ----> works fine
Only BT mouse / Wifi ON ----> works fine
USB mouse and BT keyboard / Wifi ON ----> works fine
USB keyboard and BT mouse / Wifi ON ----> works fine
Where is the problem? Is there any solution?
Solved!
Go to Solution.

I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
Best regards, jC
Broadcom manual:
Bluetooth Collaboration
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How do I do a split screen to show the contents of my Library and a playlist at the same time?

I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?

See this thread -> https://discussions.apple.com/thread/5666364

IS there a way to load and purchase different photos from iPhoto and ship them at the same time? the only way that I can find is to purchase each photo (or multiple of one) at a time, which increases the cost of shipping, as I want to get one print of 20

Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?

Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

Is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

4G and WiFi on at the same time

Similar Messages

Maybe you are looking for