4G in the mansfield ohio area

So I read in the paper where the Mansfield, OH area is getting 4G today.   The coverage area is supposed to extend north to Shelby, OH (where I live).  Well I have the samsung droid charge and I don't get any 4G coverage at all.  The map on the website here even shows me to have 4G coverage when I enter in my address.  Is this an area that still hasn't been fully turned on yet?

Mkoppler123, thank you for your inquiry. I understand why you would want to get 4G as soon as possible in your area. I checked Shelby and I see some areas of 4G network and spots of 4G extended network. When you look at your address on the map does it say 4G extended? If so, this means you will get mostly 3G on your phone. It is possible to pick up 4G at some locations depending on distance from the towers. On the map, you will notice in the notes for 4G extended it shows " ** Access the 4G LTE network within the Extended Coverage Area; certain conditions may cause your service to connect to 3G in this Area." Try driving around the area to see if you pick up 4G on your phone. 

Similar Messages

  • Lag Data / 4G in Columbus Ohio Area 6/8/2011

    Just wondering if anyone else is getting lag in the Columbus area? My thunderbolt normally will zip along, but this morning, it's super slow even though it says it's connected to the 4G network.
    I normally get on my Sirius / XM app in morning, but this morning it was so slow the app basically timed out. I'm able to load web pages but, it's spotty and slow. The SpeedTest app won't even work
    I haven't heard any from Verizon about the network being down.
    I Rebooted, toggled the 4G, did a dance, ect ect.

    Hello br27125,
    There are a lot of factors that we take into consideration when there are service issues. Location is one of the factors as well as the device being used. Below, I have some questions so I can better understand the root cause so I can customize a solution for you. If you would be so kind as to reply with the answers then that would be great!
    How many bars of signal is displayed on the device in the problematic location?
    Were you ever able to use the phone previous without any problem at the location in question?
    Does you experience these issues indoors, outdoors, or both?
    Do the dropped calls happens when making or receiving calls?
    Is the issue with the same number when happening?
    What part of the southwest Columbus, Ohio area? (zip code preferred)
    Once you have provided answers to the questions then I can provide a solution for you. I look forward to your next posting.
    Thank you...

  • How can I stop the sharing on the iPhones that are in the same account because its sharing every thing even text messages

    How can I stop the sharing on the iPhones that are on my account because its sharing everything even text messages and its driving everybody crazy

    An icloud account is designed to be used by one user to keep his/her devices in sync. 
    If you have muitiple family members or friends using the same account as yours, then have them get their own Apple IDs and icloud accounts.
    If you mean you want to stop the sharing between all your devices, then on any one device, go to Settings>icloud and turn off the services you don't want that device to share/sync.  Or turn off icloud altogether if that's what you want.

  • I have reinstalled my OS without time machine (using the disc). I want to restore some pictures in the iPhotos which are already in the time machine i was using previously. How can I restore iPhoto from previous time machine?

    My mac book was incredibly slow. When I went to Mac store, they asked me to reinstall the OS with CD and not with the time machine. I reinstalled the operating system. But when I opened the applications, all those started as fresh applications as usual. I have the backup of all other data in another hard disc. But unfortunately, I forgot to copy the photos before reinstallation. I have those photos in my time machine back up. But when I opened time machine, it started like a fresh (very new) time machine and it started backing up my present OS (the reinstalled one). I cannot open the previous time machine, which is in the same hard drive. I wish to open the previous time machine to get the photos which are backed up previuosly. When opened the time machine disc (manually by clicking the icon), i can see all the thigs which I had previously in my macbook. But unfortunately, i cannot access those through time machine! Can anybody help me please?

    How to redownload purchased apps from the App Store

  • Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions.  Complain to Apple, you may have better chance than me and they may finally listen to their users....

  • I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    iTunes.msi
    Perfect, thanks.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • Content Tab: None of the fact tables are compatible with the query request

    Hi All,
    **One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
    I have made a rpd the joins in physical layer as shown below:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
    And the BMM layer as:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
    Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
    Dim - Comment Code Details
    Fact - Complaint
    Dim - Service Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
    I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
    When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
    Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
    Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
    Thanks in advance,
    Dev

    Hi Deepak,
    Option 1:
    My tables in physical layer are joined as below:
    D1--> F1 <--D2--> F2 <--D3
    Same way i model it in BMM
    D1--> F1 <-- D2--> F2 <--D3
    Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
    I go Sources>content tab of Fact F1 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Detail
    D2---------------------- D2 Detail
    D3---------------------- D3 Total
    then, I go Sources>content tab of Fact F2 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Total
    D2---------------------- D2 Detail
    D3---------------------- D3 Detail
    Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
    I need to know whether the way I have modeled it in BMM is right,
    Option 2:
    I can combine the two facts in a single Logical Fact or the above design should also work.
    (F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
    what will be the content tab details?
    Thanks,
    Dev

  • List of materials from the excel which are not posted

    I have written bdc,
    that ware house storage locations should not be allowed.
    All the storage locations in the table T320 are ware house storage locations.
    so i have written
    if not  it_data1 is initial.
    SELECT *  into table iT_320 FROM  T320
      for all entries in it_data1
    where WERKS = it_data1-werks and
               LGORT  = it_data1-lgort.
    endif.
    LOOP AT IT_DATA1 .
      read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                              lgort = it_data1-lgort.
      IF sy-subrc = 0 .
        delete it_data1 index sy-tabix.
      ENDIF.
    endloop.
    So its working fine till then.
    but i wanted a list of materials from the excel wch are not posted,so tht the user is aware tht some items are not consumed.
    How to display that list in bdc.
    Please give the code for that.

    MY EXCEL DATA IS IN IT_DATA1.
    LOOP AT IT_DATA1 .
      read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                              lgort = it_data1-lgort.
      IF sy-subrc = 0 .
        delete it_data1 index sy-tabix.
      ENDIF.
    endloop.
      LOOP AT IT_DATA1 .
        MOVE-CORRESPONDING IT_DATA1 TO IT_DATA_h.
        Collect it_data_h.
      ENDLOOP.
      Clear it_data_h.
    clear : it_data1.
    THEN MY BDC IS LIKE THIS.
    LOOP AT IT_DATA_H .
    perform bdc_dynpro      using 'SAPMM07M' '0400'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RM07M-WERKS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'MKPF-BLDAT' LV_DATE  .
    perform bdc_field       using 'MKPF-BUDAT' LV_DATE.
    perform bdc_field       using 'RM07M-BWARTWA' '261'.
    perform bdc_field       using 'RM07M-WERKS' IT_DATA_H-WERKS.
    perform bdc_dynpro      using 'SAPMM07M' '0421'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSEG-WERKS(03)'.
    CLEAR : FLAG1, W_FLAG.
    LOOP AT IT_DATA1 WHERE aufnr = it_data_H-aufnr.
    W_FLAG = 1.
    CONCATENATE 'MSEG-MATNR' '(' W_FLAG ')' INTO W_MATNR_C.
    perform bdc_field       using  W_MATNR_C
                                   IT_DATA1-MATNR.
    CLEAR : QTY.
    QTY = IT_DATA1-ERFMG.
    SHIFT  QTY LEFT DELETING LEADING SPACE.
    END LOOP.
    NOW HOW TO COMPARE THE MATERIALS IN EXCEL AND  BDC POSTED.
    PLEASE PROVIDE THE CODE FOR THAT AND HOW TO DISPLAY.

  • The payment terms are not getting reflected in PO

    Hi,
    We are in SRM5.0 Extended Classic scenario.
    We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in  SRM system.
    But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
    Could you please suggest what may be the issue here.
    Best Regards,
    Siddappa

    Hello Siddappa,
    I am a little confused here with the scenario.
    I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
    So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
    So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
    However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
    So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
    I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
    Regards
    Pramod

  • The external credentials in the SSO database are more recent --- Receiving this error while adding entries to SSO database.

    We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
    error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
    iled unexpectedly.\r
    : error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
    dentials in the SSO database are more recent.\r
     error MSB4018: \r
     error MSB4018:    at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
    ring applicationName, String identifier, IPropertyBag properties)\r
     error MSB4
    018:    at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
    me, String propName, String propValue)\r
     error MSB4018:    at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
    ()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
    askExecutionHost.Execute()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
    cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
    askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
    sult)
    Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010

    Hi,
    This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
    1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
    2. If this does not works, have a look at this
    link
    Hope this will help.
    HTH,
    Sumit
    Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

  • When is select Bookmarks from the Menu Bar, at the very bottom are a bunch of bookmarks. How can I move them in groups to a folder?

    When is select Bookmarks from the Menu Bar, at the very bottom are a bunch of bookmarks. How can I move these in groups to a folder or folders?

    The easiest way to move bookmarks around is in the Bookmarks Organizer, which at some point was renamed the Library. To open it, you can choose Bookmarks > Show All Bookmarks or press Ctrl+Shift+b.
    (Please note that the sort order of the Library dialog doesn't actually carry over to the menu. To sort the menu alphabetically, it's easiest to open the Bookmarks Sidebar, right-click the words Bookmarks Menu and choose Sort by Name.)

  • I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them.  I can not click on those songs and when I eject the phone they are not on the phone.

    I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them.  I can not click on those songs, delete or anything and when I eject the phone they are not on the phone.  I tried to re-add the songs and it says it can't add songs because they've already been added.  So HOW can I get the songs to actually ADD to my phone to where I can listen to them?  It's like they're stuck in Sync limbo or something!  Any help would be greatly appreciated.

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

    I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  I get a message on my phone that says " the URL you are requesting is not found on this server".  Pics and videos have been deleted too.

    I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play.  I get a message on my phone that says " the URL you are requesting is not found on this server".  I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted.  I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either.  Is there someway to get the videos to play on my phone again?  Make the photos not as blurry as they are now and to restore the pics and videos that have been lost?  I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be.  Please help if you can.

    I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
    Need help too!!

Maybe you are looking for