4G LTE active with Wi-Fi connected

Hello,
In my past experience, when Wi-Fi is connected to an active network, 4G LTE greys out or disappears and becomes inactive until needed for things like visual voicemail and MMS. On my G3 it seems that LTE will stay on and even have some activity while Wi-Fi is on. I have "avoid unstable connections", "battery saving for wi-fi", and "wi-fi signal weak" all turned off. I'd just like to know if this is normal.
Thank you in advance

Thanks for the information Kuban_Kevin. When wifi is on your data is not being used. Once wifi is off if you disable it, or perform a function that requires the network, the wifi signal will disappear. If you have any downloads, updates, or other data related functions that need the network , it will update once off wifi. That may be where usage is occuring.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Similar Messages

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

HT5538 My facetime and imessage aint working now, when i try to turn it on, it says waiting for activation then when it finishes it says something to do with a network connection. help me!!!

My facetime and imessage aint working now, when i try to turn it on, it says waiting for activation then when it finishes it says something to do with a network connection. help me!!!

iOS: Troubleshooting FaceTime and iMessage activation

Setting up Abode Digital Editions, when I try to Authorize with my Abode id information I get the message "Activation Server Problem - check connection to the internet" when I clearly am connected to the internet ?

Hi can anyone help me please this is driving me crazy ! I download and install Abode Digital Editions and when I try to Authorize with my Abode ID information I get the message " Activation Server Problem - check connection to the internet when I clearly am connected to the internet ?

<moved from Downloading, Installing, Setting Up to Adobe Digital Editions>

My iphone 5 require activation and i have connected with wifi but it is unable to activate

my iphone 5 require activation and i have connected with wifi but it is unable to activate

It needs a SIM card installed.

Connect outcome of activity with other activity

Hello,
I have one question:
Is it possible to connect an outcome of an activity with an activity of an other block.
For example I have an activity with 2 outcomes (approved and rejected).
When something has been approved, the workflow process shall be go back to a previous step of an other block.
I hope you understand what I mean.
Best regards & Thanks

Is it possible to connect an outcome of an
activity with an activity of an other block.
Yes you can connect the outcome of an activityt to other activity
I have an activity with 2 outcomes
(approved and rejected).
When something has been approved,
the workflow process shall be go back to a
previous step of an other block.
Instead of going back what you can do is first check the Decision whether it is approved or not then based on the decision value you continue to any one one of the branches
Or
Make Use of WAIT STEP and based on a condition if the decision is A the execute a block or terminate .

Has Apple fixed the problem with 4G cellular connection?

Has Apple fixed the problem with 4G cellular connection on the iPad 3?

Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question.

How do I maintain license on systems with no internet connection?

I will be installing CS6 on PCs with initial internet connection, but they will be moved into a space without any internet.
How do I keep the CS6 working without the connection?
Is there a license file I can download then apply to the systems without the connectivity?

Hello Scott,
Adobe has prepared this informations: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
>>> Additional information for users who are temporarily unable to connect >>> ...I quote:
What happens if it's necessary to be offline for a while?
The Creative Cloud software makes a call to Adobe servers once a day to verify the account status.
If the account is in good standing (that is, payment is up-to-date) when the last call happens, the software status is refreshed to run for at least 99 days while being offline.
Note: Signing out and signing back in (while online) just before going offline for a long period ensures that the software works for at least 99 days without needing to connect.
The software still reminds you to connect to the Internet during this time. These reminders can be suppressed until the last 30 days, when a daily message prompts you to go online and refresh the software status.
Hans-Günter

After I activate the iphone with an internet connection..

After I activate the iphone with an internet connection on my home computer, do I ever have to have internet on my home computer for my iphone to work? Like do I need the itunes store for my iphone if I'm never going to buy anything from it or can I just use the internet connection from my iphone? Because after I activate my iphone I was thinking about canceling my internet on my home computer because I'll have it on my iphone..would that work? Thanks!

As posted above me here. One of the Requirements for an iPhone is a PC and an Internet Connection.
1. iPhone needs Internet to communicate with the servers when you do any iPhone Updates
2. iPhone needs Internet to communicate with the servers when doing a restore
3. iPhone uses internet when you connect to iTunes to confirm you are an AT&T User so you can see your number in the Summary screen
Also if you ever want to put music, tv shows, podcasts etc. On iPhone most of this comes from the iTunes Store so that requires the Internet to download the content.
Also if you want to take advantage of WiFi in your home then you need active internet if you got a Wireless Router
If you do not use Internet on a PC allot, Check into a cheap DSL package and that should suite your needs for using the internet only when you need it.

Rear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)

DRear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)T Hey there,
I just installed the newest modded driver from [url="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790">here[/url] and now I have the problem that when using DDL/DTS Connect (yes I have it activated!): the rear left channel gets output on my front left speaker, and the rear right goes to front right. My externaldecoder is correctly identifying the output stream as DD/DTS and the front speaker and subwoofer works fine. Also when using my Xbox 360 the sounds correctly get to the rear speakers, so this is likely not a problem of my decoder.
Anyone had a similar problem to this? Any idea why this happens?
My system:
Windows 7 x64
Intel Core2Quad Q6600
4 GB RAM
nVidia Geforce 9800 GTX+

H I noticed this doesn't just happen with DDL/DTS Connect. The same behaviour happens when I connect my headphones to the plugs on the back of my computer. The rear plugs don't output anything, while the front plugs have "double" output.
I tried all kinds of different drivers, always removing the previous ones and restarting before trying a new one. Right now I'm with the official 2.8.003 X-Fi driver.
Please, somebody help!

Satellite T110-10R with Realtek 8187se - connection drops on battery

Hi my friends,
there is a big issue with my laptop.
wlan signal strength: very good
other laptops do not have these issues in this network.
so, here my problem:
on AC mode, there are no problems with the wireless connection, but on battery mode, my wlan keeps on disconnecting, connecting, disconnecting, connecting... sometimes, this happens several times in one single minute! this is quite painful and annoying.
this happens with different wireless network, tried it on different ones - not just my home network
my system:
Toshiba Satellite T110-10R with Realtek 8187se
Windows7 64bit.
here a short overview on things i already tried
-BIOS updated !
-driver updated !
-OS reinstalled !
-power options: max performance
-even in all power options, i set max performance for the wireless adapter settings, on battery, too
-properties of the wlan card in device manager, i disabled the option : allow the computer to turn off this device to save power
-in the same window, advanced, 802.11d activated
well,despite of the fact, that i have this issue on my home network AND on other networks, i tried following things on my router at home:
-firmware updated
-device reset
-no automatic ip (dont know the correct english term) - this i set on my laptop, too
-wlan changed to 802.11 b, g, b and g, also tried wep
-wlan channel adjusted to auto and not auto, trying different channels
-disabled all power saving functions
... as you can see, i tried everything I KNOW..
maybe, you guys have something for me i did not think on...
well, i hope, somebody can help me with this problem...

hi guys,
there is a big news on my thread.
i still have the issue but JUST ON my wifi-lan at home.! I again tested my problem on other networks and i had no problems on those ones.
Well:
my router at home:
fritzbox 7110
-firmware updated
-device reset
-no automatic ip (dont know the correct english term) - this i set on my laptop, too
-wlan changed to 802.11 b, g, b and g, also tried wep
-wlan channel adjusted to auto and not auto, trying different channels
-disabled all power saving functions
maybe now somebody could help me?!?!
Are there known issues with realtek and fritzbox devices?
other device/laptops dont have any problems with this router!
just my toshiba with realtek wlan adapter
bye

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Email account. What is causing this and what do we need to do to resolve it?

On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.

Contact whomever supports the email account and get the correct Outgoing email server settings from them.

Problems with n97 apps connecting to network (Voda...

Problems with n97 apps connecting to network (Vodafone UK – 3G)
Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this. They now only connect to one known wi-fi.
I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem. I’ve checked for software updates and do not believe any have been applied or are available. All apps have been downloaded via Ovi on the phone. I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
The apps which I notice causing a problem are:
Sainsbury’s/nectar
Tesco
Map my tracks
Snaptu
Opera Mini
Any one got any ideas???

I have the same problem since i updated my mac to 10.5.6.
Each time I have to do a diagnostic and retype the WEP password to have the internet connection.

I have a wireless home phone connect device. Can call out on it when dial tone present, but most times cannot receive calls since purchase. Anyone else having a problem with their home connect device?

Have had Wireless Home Phone connect device refreshed and updated three times since I purchased it in September 2014. Last tech I worked with on it initialized an NRB to check the network. I checked the location of the tower, which is less than one mile up the hill with clear line of site. The device always has two antennas on it. The device is great when it does work, but most of the time it rings three times and then jumps to an automated message saying the person I am calling is not available. I've actually gone up there several times to try an fix the device, but always end up calling a Verizon tech who has me unplug it, pull the battery, and they do some network stuff and then we turn it back on and it works. After the last time on 10/02/14, I called it and got the message. I drove up there, 100 miles one way, and called it while standing in the room. Got the same message. I picked up the phone, heard a dial tone and dialed my phone and it range through. I hung that phone connected to the device and call it using my cell phone. It rang through. I went home and tried to call it the next day. Again it did not ring through and I got the message after three rings. I call another phone at the facility and had them call me on my mom's phone and it is fixed it again. The fix last for a day or two and then it's broken again, like it is today. If it's a network problem then it must be fairly close to the area because no matter what we do it fails again. So much for the 99.98% reliable. This thing is a piece of junk!
I purchased this device and put it on my plan so that my mother who we placed in a home at 96 years old would have a phone connection that she could use and wouldn't flip her out. My family and her family has not been able to faithfully connect with her at this critical time in her life. I am giving Verizon 10 more days to figure this out and then I am going to ask for a total refund not to mention how much time and travel I have put into this piece of junk. Either the home connect transceiver is broken or the network is broken. Why should I pay close to $70 for a service that has not worked more than several days out of 35 days? Also I have spent close to three hours on the phone with decent technical people, but it's my time. I should send Verizon a bill for every time I have gone up there to fix this device as well.
What perplexes me is that a regular cell phone would have sufficed, but because Verizon has to have a data connection that is not available on a regular phone and it was going to cost me $30/month, I decided to go with the home connect. Seemed like a nice solution for an older person who would have a hard time using a cell phone and keeping it charged. Plus after all the fees for getting it connected, it only cost $20/month. That would be a pretty good thing, IF IT WORKED....... The other thing that irks me is, why do I have to pay for a data connection when the cell phone Verizon originally provided can't even access the network. What ever happened to adding a phone line for $10 bucks\ month? All I wanted was a simple phone. She would not be able to use anything more complex and all she needs is a phone line period.
I have no problem paying for something that works and does what it should, but this is ridiculousness. The MTF on this device is somewhere around 1 to 2 days. Out of 365 days that's about a 96.5% failure rate....... Want my advice? Get ride of this device. It sucks and it's bad marketing.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

4G LTE active with Wi-Fi connected

Similar Messages

Maybe you are looking for