4G LTE iPhone 5: Carrier Settings Update never came

Hello,
Just to say, before I start: This question is related to Switzerland's Swisscom's 4G LTE network and iPhone 5.
I have updated to iOS 6.1 (for Swisscom 4G LTE compatibility, it's now compatible), but didn't get the carrier settings update, and when I reset the iPhone (including erase all content), I got the Carrier Setting Update and it enabled 4G LTE, but I have progressed in lots of apps and games (mainly apps), and it will be very difficult to do a full restore and recover all my progress etcetera. How can I get the Carrier Settings Update? I went to Swisscom, and they said to erase the iPhone, but again this would be a big inconvenience and I am trying to avoid it.
Sorry about any problems: I'm not very tech savvy with iOS devices, and this is my first post here so I may have put in the wrong section.
Thanks a lot in advance

Well, I've connected my phone to iTunes, and still nothing has come. My friend's iPhone 5 did have enable LTE, when he updated and I believe he got it over the air, and didn't connect it to iTunes. iTunes is still syncing...
Thank you very much for helping
It's suddenly appeared. My three friend's iPhone 5's carrier settings update came straight away after updating this morning (we updated together), and mine has come about 7 and a half hours later... but still, it's come. I don't think this was related to iTunes (by the looks of it).
Thanks a lot for helping me, and for the quick replies.
Message was edited by: chetan20k

Similar Messages

  • I inherited my husband's iphone 4s. After erasing all of the previous settings, updating to ios 8 I went on icloud to set it up.  During the set up, the screen froze on "carrier settings update". I can reboot, but the message comes right back.

    This is a phone re-set from a previous user.  Reset from icloud. Froze during set up, on "carrier settings update" and has the phone number pad with it. I reboot but it comes back and I can't get past it.

    Hey Jackie,
    Welcome to Apple Support Communities,
    Take a look at the article linked below, it provides troubleshooting suggestions that’ll solve issues like the one that you've described, where your iPhone 4s has a blank black screen.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Cheers,
    -Jason

  • Carrier Settings update. New settings are available would you like to update now? Is this safe to do?

    SInce updating to iOS 8.3 I keep getting a prompt: Carrier Settings Update. Would you like to update them now? What does it mean and is it safe?

    Yes.
    You carrier is updating the information on your iPhone.  You should always do these updates.

  • Iphone 5S:carrier settings

    My carrier settings has been updated to LTE when i connected to itunes. But LTE has not yet been made available in INDIA. How to revert back to 3G?

    I am not sure if it would work but its worth a try.
    1.Make a backup of your phone in itunes.
    2.Settings - General - Reset - Erase all content and settings
    I think that should remove the carrier settings update as well
    Then without restoring first check the option whether it allows you to use 2g.
    Then you can restore and incase the settings come back after restore then again
    Settings - General - Reset - Erase all content and settings
    and this time setup your phone as new.
    You can also try to restore your phone from itunes installing a fresh ios and then ignoring the carrier settings update.
    It might work.

  • HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

    I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • How to Remove "carrier settings updates"

    Hello
    do you know how to remove carrier settings updates downloaded from Itunes?
    Thanks

    The bottom of this document tells you where they are on your computer. I suppose you could delete them. There's nothing about deleting them from the phone.
    http://support.apple.com/kb/HT1970

  • Frozen iPad screen; non responsive. MSG:  carrier settings update....choose not now or update.... Neither respond and iPad will not totally shut down...date

    MY husbands iPad screen is frozen. Will not shut down. Non responsive. Message:  Carrier settings update....choose Not Now or Update.... Completely frozen & non responsive.

    THank you Demo from Pittsburgh, PA. Holding the home button and power on button together for 25 seconds worked!  Rebooted his system    thx for the tip!

  • Carrier settings updates updating... & updating... &...

    My iPad's carrier settings updates http://support.apple.com/kb/HT1970 are updated again and again, every time iTunes starts up or my iPad gets in its reach.
    Am I the only one? And does anyone know what I might do about it?
    Thanks a lot!

    Did you manage to fix the problem?  I just posted the same exact question...

  • HT201270 My ipad is displaying the carrier settings update box but does not respond to either the "update now" button or the "not now" button and has totally frozen. The ipad cannot switch off as I need to clear this box before I can "slide to shut down".

    Can anyone help me with carrier settings??? My ipad is displaying the carrier settings update box but will not respond when I press "update" or "not now". I have tried to switch the ipad off, but cannot "slide to shut down" as I need to clear the carrier settings box first!! HELP PLEASE!!!!

    Have you tried a reboot? Hold down the power and home buttons simultaneously. Ignore the Slide to Power Off prompt if it pops up. The display should go dark, and the Apple logo should appear as it begins a reboot. This is a soft reboot - it does not erase data.

  • Carrier settings update

    Hello . i'm alex and i have an iphone 4 iOS 4.0.1 and a have a problem. My network name is COSMOTE and i can't update carrier settings. when i go to settings>general>about there is no promt message and the same in itunes. so i can't use facetime too ... can you help me please?

    You will need to confirm if Costmote supports MicroSIM cards on their network. What ever application they are using to manage customer account information may not be compatible with MicroSIM serial numbers. Do not cut an older series SIM card to the size of the MicroSIM. Doing so will void your warranty. Also MicroSIM are different than older SIM cards by providing better encryption and enhanced features such as increased entry fields and better connectivity with cellular towers.
    http://support.apple.com/kb/TS2774
    Carrier settings for Cosmote: http://www.cosmote.ro/en/serviceInstructions.aspx?style=styles&ns=-10000&cid=172 52

  • Are the "Carrier settings update" as invasive as it sounds?

    I keep getting the prompt to update "carrier settings" and even though I cancel, it comes back. I read the page dealing with it on the Apple support, but it seems to say Apple wants to collect information about me, my use and possibly content from my carrier. I'm not ok with that. Am I getting it wrong? If I'm right, can they legally make it mandatory for me to download? Can I turn it off somehow without downloading it?
    Thanks

    TY, I started getting it 3 days ago and had never seen it before either. This is all they have to say about it.
    iOS: Updating your carrier settings - Apple Support

  • IPad and constant carrier settings update requests

    Hi, I recently updated to my MacBook Pro to Mac OS X 10.7.4 and my iPad to iOS 5.1.1. Now, every time i plug my iPad into my MacBook Pro and iTunes launches, it tells me I need to update my carrier settings.
    …every time!
    What's going on?

    Same here.
    I was working better than ever with the 3G signal.
    Since the carrier update, it is sporadic. Especially at home.
    I know this because when EDGE kicks in my radio goes crazy with static.
    I get 3G half the time while at home.
    I know the carrier update says nothing about improving signal. Maybe it is coincience.
    I dont know.
    The static on EDGE drives me crazy...

  • HT201270 Problem with iPad carrier settings update

    I have done this update and now I get a repeat message to do it again every time I sync my iPad. How can I stop this happening?

    I have exactly the same problem, I am in the UK on the O2 network.  It is definitely a network provider problem, I can tell you exactly when this problem started for me. In the UK there was new legislation brought in to block the Pirate Bay domain.
    Ever since the the carriers in the UK had to update their settings on their mobile devices this problem started and it seems to be absolutely no way to get it resolved.
    I have tried, in vain, to get O2 to do something to this problem that they are unable to do so.

  • AT&T Carrier Settings Update

    This morning I plugged my iPhone in to my computer and opened iTunes. I wanted to do a restore. I clicked on "Check for New Updates" just for the heck of it, and an AT&T software Update appeared.
    It installed quickly. After I restored my iPhone, it asked to install the AT&T software again, so I guess when you restore, you need to install the update each time??
    Here is what I got.....
    http://support.apple.com/kb/HT1970
    http://www.tuaw.com/2009/02/07/whats-up-with-the-iphone-carrier-update/
    Message was edited by: Peter K. Grether

    It looks like ATT is getting ready for this:
    http://www.engadget.com/2009/01/25/details-on-atandts-3g-microcell-everything-bu t-the-date-and-pric/
    But the update must contain more just the two images mentioned in the article you linked to above, or it would not fix the connectivity problems so many people encountered.

  • HT1349 Carrier settings update

    The above message appear on my iPad and I can not unlock it or remove it off my screen. My iPad then turns off every 5 screen.

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Then go into Settings > General > About and see if you can download the update : http://support.apple.com/kb/ht1970

Maybe you are looking for

  • Sale Order # - MRP element missing in MD04

    Hi, I created an SO with a material, for which planning was not done in MRP view. Later I changed the schedule line category from CN to CP in VA02. Then MRP run is carried out for that particular plant (1001) . IN MD04, i could able to get the detail

  • Missing CF Movie Files

    when I opened FCP 5.04 this morning a window appeared asking for missing movie file "CF-dvc appl-720x48010233017. After a search I discovered that it can be found in the "Constant Frame Folder" within the FCP Render folder/ In fact that every project

  • How to hide URL

    Hi , I'm running Reports 10g from Forms 10g Application , the type of my reports is JSP , lately one of the staff started changing the "getjobid" parameter that is shown in the URL that he has access to , when he changes the number of the jobid anoth

  • Issue in WAD 7.0 regarding opening document from MIME repository

    Hi Experts, I am facing an issue in WAD 7.0 regarding opening document from MIME repository.. My requirement I want to have a button , on clicking of this button one excel file ( already located at MIME Repository) should open in a new window. To ach

  • Trouble sending only attachments that I want to send to Windows users

    Hi, I am a newbie who needed to send jpeg images to tech-support (non-Apple hardware (not a computer)); these people use Windows. I attached the jpeg files as Windows Friendly attachments using Apple Mail (Intel 24 inch iMac 3 GHz Core 2 Duo 4 GB RAM