4G out in Seattle Area?

I'm in downtown Seattle and Normally I see my phone in 4G status. Some time today it flipped to 3G and as low a 1X at times. The only other time I saw this is when the 4G went out nation wide recently. Checked my settings and CDMA +LTE/EvDo auto is turned on. What is happening today?

Sidscan-
I'm sorry to hear you were having problems with 4G in the Seattle area.
I would be interested to know if you are still having problems with your phone.

Similar Messages

Any ideas on great hands on training for incopy in the Seattle area?

My creative team wants to move to an incopy workflow. Any great hands on trainers in the Seattle area?

OK. I did manage to figure out a work around by centering the envelope on an 8.5 x 11 page. This is not the way I used to have it set up, but it works. With thanks to "Printing envelopes from Address Book to Epson 545", I was able to figure out a work around.

How do I find out what applications are running in the background

I have a 2008 iMac with 2GB memory. How do I find out what programs are running in the background? I am going to buy a new iMac before the end of the year to replace this one. When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.

open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses

I can't remember my admin password for one of my iMacs. I'm locked out! What are my options?

I can't remember my admin password for one of my iMacs. I'm locked out! What are my options?

Resetting an account password

11.1.2- Need to find out what reports are being executed by a user

Hi,
We have financial reports executed from workspace.In essbase session , only the user id is displayed and the Request type- mdxreport is displayed. We also tried searching the log for Financial report didnt find anything relevant.
Is there a way to find out what reports are being executed by the user.
Thanks in advance.
Regards,
Saumya

STAT will give you the information for a limited period of time and is limited to the server which you are logged onto yourself. Beyond 24 hours it is of even less use even if you change the selection screen values.
If you want it for a period way back into the past, then you need to use ST03N.
There are at least 2 dependencies and 1 confusion:
1 dependency) The length of period is determined by the size (length) of the file. You can change this in ST03N (default 50MB) via the menu settings.
2 dependency) The stat collector jobs need to be scheduled to write the information to ST03N (once per hour is a legal requirement in some non-banana republic countries).
1 confusion) There is an obscure function which converts a report submit to a transaction name (there is not much difference anyway) and an even more obsure one which filters what ST03N will record and therefore whether you can read it. You can (un)filter these things away if you search the SAP Marketplace for the term "MONI".
What is of particular value from this control is that you can even detect a submission of an abap which only existed temporarily.
Also note that having this information is potentially very powerfull with respect to the users (some of them are human too), so you should expose and use it responsibly.
You should also ensure that only responsible users / auditors have access to S_TOOLS_EX.

How do i find out what devices are authorised on my apple ID?

I have just bought a new iMac and want to get all my itunes library etc on it. However, apparently i have reached my limit of 5 authorisations, which is entirely possible as I have had a number of iphones, Macair and ipads, some of which I either no longer own or are no longer functioning. How do I find out what devices are authorised and then deauthorise any that I don't use any more - given that they may not even work!

Welcome to the Apple Community.
You can't de-authorise just the computers you no longer have access to.
Your only option is to de-authorise all your computers and then re-authorise those you wish to be authorised. You can do this by logging into your account settings in iTunes on your computer (Store > View My ID) and selecting the option to de-authorise all.
Please note however, you are only permitted to do this once in each 12 month period, therefore you would be better de-authorising your computers before you lose access to them. you can do this from the 'Store' menu in iTunes.

My computer says I cannot use icloud because I have multiple versions of outlook installed. How do I find out which versions are installed and how do I decide which one to delete?

My computer states that I have multiple versions of outlook installed and that i cannot use icloud. How d if find out which versions are installed and which ne to delete without interrupting the other?

That's a Windows/Office problem. You should ask in the Microsoft support forums.

How can I find out what calendars are in my .mac account?

A simple question, but I am struggling with the answer.
I have used ical since it first came out and have found it brilliant and very easy to use and access both from the office and also from home. However because I have used it for so long I have had various changes in staff. I am keen to find out if there are any 'other' calendars created by anyone who has/had access to ical via my .mac account.
The calendars must be stored somewhere online? How can I find out what calendars I am hosting?

Hello, chunnyb.
Thank you for visiting Apple Support Communities.
Here are the steps on how to view your purchase history in iTunes.
iTunes Store: See your purchase history and web order numbers
http://support.apple.com/kb/ht2727
If you need to report and issue with a purchase, see the article below.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Cheers,
Jason H.

How do i find out what drives are present in a particular system

Hi,
How do i find out what drives are available in a particular system either by giving the systems ipaddress or the systems name...

You can't do that. That would be a real security risc.
/KAj

How do I find out when openreach are connecting my...

Ok so I'm now at the point of tearing my hair out....
After a fault with our line almost 2 years ago I got talking to the engineer. He told me that the board in the exchange that runs our broadband is set for fibre but would need all the other work to be completed for it to go live i.e cabinet and cables layed ect ect but I should expect something to happen within a year. So I waited and waited and waited. I contacted BT whom I am a customer about said roll out in my area. They told me they do not have that information at which time the Openreach website line checker said the exchange was enabled but nothing else.
So I waited some more and last October/November (2014) we had sub contractors ask if they could store their plant machinery on our land.. we asked what they were doing to which they replied "digging the road and laying the tubeing for fibre cables for BT Openreach" . They also told us that they were there just to dig the road and NOT lay the cables.
After the work was completed I still heard nothing but then later found out that BT Openreach had installed the cables but had not connected said cables to our serving cabinet. We spoke to another Openreach engineer working outside our property and asked what they were doing and we were told its was work being carried out for "OUR" fibre broadband. (the cables stop at our property and go nowhere else we are literally at the end of the line).
So I have waited some more. Contacted BT (my ISP) and have been told yet again they do not know that information.
Again waited some more then tried the line checker via the openreach website this time I was greeted with your serving cabinet is now connected and ready for fibre orders..... guess what BT have told us that that cabinet is indeed live but our property is not connected.
Openreach (via website) tell me to contact my ISP and when I do (BT) they tell me they do not have that information. I am being sent in very small circles. I know the line is there I know the excahnge is active and my serving cabinet is live but I can't contact anyone to find out when this work is going to be completed. Obviously OpenReach would be my best bet but there is no contact details for end user enquiries.
Some one is sat in an office sending out workmen/engineers. How on earth do I find this out???????????
Before I get any replies I know I have fibre line to the property I know my cabinet is live and I now my excahnge is ready. It seems that the only thing that needs doing is the line to the cabinet need connecting/activating. I want to know when or how I go about finding this out. I am on these forums as a last ditch attempt. I find it very frustrating that time and money as been invested closing and digging the road and setting everything up for it not to be completed and then make it impossible to find out why.

Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

IPod Classic won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore?

iPod won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore? Is anyone else familiar with this problem? It had over 25 movies, thousands of songs & hundreds of pictures, and it seems like they're still on there, because 74gb are used out of the 80 but when I turn the ipod on it appears to be at factory, fresh out of the box settings and my computer wont recognise it at all...

For the following suggestion, when you connect the iPod to the PC, and iTunes open up, please close it, before you fix the drive.
Your iPod hardisk filesystem is corrupted, and maybe repaired by using command line, under DOS window.
chkdsk drive: /F
where drive: is the iPod ID D: or E:
You can also try clicking the IPod properties, and run error checking in GUI, tick "fix all error."
If you have access to a Mac, you can use DiskUtility, and run FirstAid to repair the iPod.
Good Luck!
BTW, this problem arise because, iPod did not complete, closing, the Sync process, due to timeout, for Windows systems, I think it is maybe caused by Antivirus, or some other plugins, trying to make windows 7 look like Mac OS X.

How to find out which queries are being used ?

We have a number of InfoSet Queries which the users are calling from SQ00. Some of them are very old.
I would like to find out which queries are being used, so we can have the idle queries decommissioned.
How can this be done ?
Best regards,
Peter

Hi,
It's been a while since I've done this but one method is to use ST03N & look for the execution of programs with an AQ* prefix. The general structure is AQZZ/<query user group><query name>.
You could probably get the same info from the audit log but I've not checked that.
Cheers,

How to find out which objects are at the end of the datafiles

My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.

>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

How to find out which BADIs are used

Hi Experts,
Is there any tcode where I can give the transaction or program name and find out which BADIs are used in that transaction.
thanks
sankar

Dear Sankar,
You can first check available BAdis and then go to SE19 to see what all have been implemented.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Hope this will help.
Regards,
Naveen.

How to find out if there are repeated characters in a string

hey guys
well i kinda have a little problem figuring out how to find out
if there are repeated characters in a string.
if anyone can help, would appreciate it.
thanks
milos

Try using the StringTokenizer class. if u already know which character to trace. this could do the job.
eg. String str = "here and there its everywhere";
StringTokenizer st = new StringTokenizer(str, "e");
int rep = st.countTokens();

4G out in Seattle Area?

Similar Messages

Maybe you are looking for