4gb creative zen v plus does not work in vist

hello
i just got one of these..and the cd provided does not work in vista..i read on the site that this model has nati've vista support then why doesnt it work for me?
any help appreciated

Hi,
What do you mean by the cd does not work in vista?
Can you tell us what happens when you try to install using the installation cd, error messages, etc?
Try plug in your Zen V Plus to your computer, does it get detected?

Similar Messages

NEW Zen Stone Plus does not work

It looked like it started to charge, but then it just died and Windows does not detect the dri've. I have tried hooking it up to another computer but no go!
I've tried all the troubleshooting on the page and nothing seems to work, it's just completely dead even though it's brand new. I wasn't even able to upload songs to it.
any tips? or should I just send the player back? The problem is that I am in Iceland and bought it in Toronto, Canada so I would like to try everything before sending it.
thanks in advance!

I used these instructions and got all the way to reloading the firmwear. Then it said to restart the comp and I did and after that nothing! What am I doing wrong?
Hi everyone
There is a Recovery Mode for the flash-memory players although it is different from the Rescue Mode for the HDD players - that is used for carrying out maintenance operations on the player but Recovery Mode for the flash-memory players is just a different way of connecting your player to your PC when it won't normally connect, for example, when the firmware has become corrupted and the player won't start and isn't recognised by the PC. It is in fact a way of communicationg directly with the STMP3500 chipset that these players use without needing any additional firmware.
Creative themselves called it Recovery Mode - it was first seen when Creative posted the instructions for a previous firmware upgrade that could not be run when connected normally. For the N200 it was in the instructions to upgrade to version .5.0.
Here's a line from the instructions for the latest N200 firmware upgrade, v.20.04:
When prompted to set your player in Recovery mode, disconnect your player from your computer.
Here are the instructions:
. Download and install the Mass Storage Drivers from the website.
2. Press and hold the Play button while connecting your player to the PC. If you have a one-piece player then remove the battery first.
3. Keep pressing Play until the New Hardware Wizard starts - this will only happen the first time you put your player into Recovery Mode.
4. Complete the New Hardware Wizard.
To check that you are in Recovery Mode open Device Manager (right-click My Computer and choose Properties, then the Hardware tab and Device Manager) and look for a Player Recovery Device entry.
When in Recovery Mode you can reload the firmware.
PB

Creative ZEN, Albums fused, does not sort albums correctly!

;Creative ZEN, Albums fused, does not sort albums correctly! http://nl.creative.com/products/prod...t=6999&listby=
Creative ZEN, Albums fused, does not sort albums correctly!
I attach my Creative Zen to my computer true USB,
I manually copy Albums to my creative zen.
If i view my (ZEN) folder in Windows XP, everything looks great and sorted!
I safely remove my ZEN player from my computer,.
The ZEN rebuilds his data.
I go and view albums, and what do i see each time! over and over again!
Albums fused together, albums scattered true each other, MOST albums got different names then in windows XP!
I get really frustrated from this! how can i make this right!
I want the ZEN to show the albums like in WINDOWS XP! how hard can this be!!!
Thanks for the help in advance!
Greetz!
Support4u

Hi,
The Creative ZEN organizes songs according to the ID3tag of the music file, not by folders. If you want to arrange the music files in the order you want, please check and make sure that the music files are tagged properly. You may need a third-party tag editor to do this.

Premiere Pro Creative Cloud Additive Disolve DOES NOT WORK!!

Another complaint since upgrading to Premiere Pro Creative Cloud from CS6. The Additive Dissolve does not work.
OS X 10.9.4
iMac
4 GHz Intel Core i7
32 GB 1600 MHz DDR3
NVIDIA GeForce GTX 680MX 2048 MB

Hi Stephen,
It works fine on my machine, which is similar. The only difference is that my Mac is running OS X 10.8.5. Can you try trashing preferences or reinstalling?
Thanks,
Kevin

WRT610N disconnects and does not work with Vista or media center extenders like the DMA2200

Linksys and all other router manufacturers advertise the greatness of the wireless 5ghz band (especially with 802.11n), but I’m beginning to have my doubts. It is true that the 5Ghz band is hardly being used so you'll have virtually no one to compete with. However, the 5Ghz distance in no way compares to 2.4Ghz, and as a matter of fact, I find it to be quite terrible. At approximately 20 feet away, both my Linksys DMA2200 and HP notebook barely get 1 bar using the 5Ghz N band with my WRT610N router. In comparison, while using my 2.4Ghz WRT54g router, I get 5 full bars at that range, and at least 2 bars from anywhere else in my house.
I have all Linksys equipment in my house as I have been impressed with all of their 2.4Ghz in the past. However, I’ve recently upgraded everything to dual-band N equipment and found numerous flaws in each of the new devices, plus none of them really even play well together. My setup is: Linksys 610n router, DMA2200 media center extender, and a WUSB600N Dual-Band Wireless-N USB Network Adapter for my laptop – all of which are currently using the most up-to-date firmware. Other devices include a WRE54G extender and Nintendo Wii.
Problem #1) The LELA software with the new N devices doesn't even recognize that my DMA2200 is a media center extender. Using LELA, I should be able to select my media extender and allocate more bandwidth for streaming media. However, since my extender only shows up as an “unknown network device” those options are greyed out. I tried to manually change the device to a media center, but still no go. I suppose you can manually allocate bandwidth in the router setup somewhere, but considering these are all Linksys products, it’s absolutely ridiculous that an option specifically incorporated in the LELA software for a Linksys Media Extender does not work!!!
Problem #2) If you are only using one system with the router, the router might actually work as intended. For most of us though there are going to be at least 2 or more systems connected to the router (wired, wireless, or a combination of the two) such as a PS3, Wii, laptop, PC, media extender, Xbox, etc. If that’s the case, you’re probably screwed because you WILL experience frequent dropouts… ESPECIALLY if just one those clients is a VISTA machine. Check the Linksys forums and you will find that this seems to be a problem with all of the new Linksys routers (610N, 310N, and 110).
Here is a Microsoft article that explains the issue
http://support.microsoft.com/kb/928233/en-us
Problem #3) Because of problem #2 I will never be able to get rid of the dropouts since my network is using one of Linksys’s media center extenders. The DMA2200 is essentially a VISTA PC to some extent and accepts DHCP requests the same as a VISTA PC. Since it is not really a PC though, there is no registry modification that can be done to alleviate the VISTA problem (not that the registry mod really works anyways). So as long as I try to use my DMA2200 wirelessly with my WRT610N router, the frequent dropouts will occur and there’s nothing I can do about it. This is REALLY TERRIBLE since the DMA2200 is specifically designed to be used with the WRT610N router in order to take advantage of the 5Ghz band and wireless N transfer rates. You absolutely need 5Ghz wireless N to efficiently stream HDTV WIRELESSLY, but if you lose your connection every 10 minutes, it is impossible to watch any type of streaming media.
Problem #4) As mentioned already, when the “N” 5Ghz range is working on the WRT510N router, the distance sucks compared to standard 2.4Ghz G, N or mixed mode networks. You can try to make it better by strictly using N products, disabling the 2.4ghz band all-to-gether, and using the wider 40mhz frequency, but it doesn’t really help. The higher 5Ghz band is a more concentrated signal and therefore simply does not reach as far as the lower 2.4ghz band. I wonder why all of these new products state that the 5Ghz range will increase your distance, when in fact it actually makes it worse?
So… basically, this router does nothing that it claims too and is basically rendered useless on any network with a VISTA machine. This has not been addressed by any Linksys firmware updates or VISTA software updates so there is no reason to even consider using this router if you you’re using VISTA or some type of VISTA Media Center Extender such as the Linksys DMA2200.
Although, I’ve always sworn by Linksys in the past, the amount of wasted time, frustration, and horrible support has really changed my view about them. I’ve reverted back to my old trustworthy WRT54g router and had to run cable through my house so that I wouldn’t have to box my DMA2200 extender up and let it collect dust in the attic. It’s really disappointing that I spent all this money to buy this equipment specifically because they’re supposed to work together, but in fact they don’t. Plus what’s the point of having top notch wireless equipment if you have to run cables in order for them to work?
Message Edited by bobbodavis on 11-15-2008 07:37 PM

I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
I have sereval scenarioes:
1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
I can see HDTV on this one but it disconnects
2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV and disconnections
3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
No HDTV but no disconnections - but very slow and streaming like youtube
4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV but nice picture - testing for disconnections right now - 30+ min.
Result:
This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
Not tested yet - looking forward to this - might bring me HDTV.
Result:
This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
This looks really promissing.
I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
I will come back with the last results when I have them
/John
Message Edited by Infraxpert on 01-05-2009 04:38 PM
Message Edited by Infraxpert on 01-05-2009 05:35 PM

Location switching does not work on Vista

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

RAID Utility does not work after Vista upgrade

Hi,
I have a Qosmio G30 with 2 HD 120GB each. After I upgraded to Windows Vista from Windows XP, the Toshiba RAID Utility does not work anymore. In WXp it worked OK, but in Vista there is no way I can mirror the HD. That is, the utility itself work, but the button that should say Mirror, or something like that is not shown. I have set the drives to RAID-1 in the BIOS, but no go.
Is there any way to get the software RAID to work again?

Hi,
just a little question: While installing vista, did you installed the RAID-driver at installation time? Maybe this could be the reason why RAID cannot be activated properly.
Please give some feedback, if you installed the RAID drivers for Vista during the installation..
Cheers

Creative Zen Nano player does not p

My Creative Zen Nano is getting power on, but it does not play the music. I have many music files and those files have been played for long time, but now they are not playing. When I checked the contents of the player using my PC, the folders are shown as .exe files. Could you please let me know how to correct the player, so that it could play the files. Thanks in advance.

Not work SORT files : Genres--> Artists--> Albums. (SORT by ID3 tags ?)
file
file 0
file 00
file 0
file 2
file 20
Work only Playlists.
Add view folders in Music Library
Or file not is ''Albums'', need view this, and folders.

My creative zen nano plus doesn't work anym

Hi I've a problem with my mp3 player. It just doesn't work. After I made a powerpoint file on it (normaly that did not cast problems) it went on and in the same time it wents off. Like the battery is not loaded. I wanted to make an update with a file from the creative page, but in the same time it did not do anything. I can not turn it on. It does nothing.
Can somebody help me? Had anyone the same experience?
My problem is too, that its nearly two years old and the seller told me that i have no guaranty on it. Is this right? Can i just turn it into the carbage can?
Please help me

jumpshot22 wrote:
"I found out the hard way that for it to be able to charge by USB on a computer, the software has to be installed which I think is pretty retarded. You should definitely pick up a charger cause it's a lot faster to charge and more convenient. " -- some guy who reviewed the mp3 player
i cant find where this other guy who said like the same thing
They must have been talking about a different player such as the Zen Micro which does recharge via the USB port.
PB

Discoverer Viewer/Plus does not work with Custom EUL owned by APPS user

I am facing a unique issue with one of my customers. They have a custom EUL named XX_EUL_US and this does not allow connecting through discoverer viewer or discoverer plus.
I have worked with custom EULS before at other customers and this was never the case. I am being told that this issue is happening as the EUL owner is APPS instead of some other user. Is this the case? Can discoverer viewer not be used with EULs owned by apps user?
Please not that the Default EUL in ICX profiles is set to this EUL and no other EUL profiles are set.
Appreciate any thoughts on this.

Hi,
I am not sure what you mean when you say you have a "custom EUL named XX_EUL_US". The EUL table should be created in a schema named XX_EUL_US. This will then be the EUL owner. You will then need to connect to Discoverer Administrator as the EUL owner and grant privileges to Apps users and/or responsibilities.
The user should then be able to connect to Discoverer Plus/View using their apps username, responsibility and password.
To be able to connect directly from an apps menu you need to have the ICX parameters set correctly. The ICX: Discoverer Default End User Layer Schema Prefix should be set to XX_EUL (without the _US). The ICX: Discoverer End User Layer Language Override should be set to US or not set at all.
Rod West

Creative Cloud Desktop App Does Not Work

Since the last updates, the Creative Cloud Desktop app no longer works. That is, I can no longer sync files, upload files, or update apps. Everything with the Creative Cloud Desktop App used to work fine. I am using Windows 7, 64 Bit system.
The files I try to upload through the desktop app, are under 5 GB. Some are 10 MB. When I try to upload a file I get a message that says: Sync Failure - with no detail about the failure.
When the app tells me there's an update(s), when I either choose one update or update all I get a message that says: Update Failure - with no detail about the failure.
I have tried to solve this problem by turning file and font sync off and then back on, or logging out and then back in.
The Abobe Team, should test this product further. I just want the community to know that this product does not always perform as expected. Therefore, it's not always reliable.
I would upload some screen shots, but after pressing the camera icon, the images would not insert.
Any help would be appreciated.

Are you getting Error code 1 while running CreativeCloudInstaller.dmg file ?
If so , follow below steps :
Important : Launch Activity Monitor and "Force Quit" all the process related to Adobe like Creative Cloud setup, CoreSync, AAMupdater, AAMupdater notifier, Adobe Crash demon from Activity monitor.
1)
Click on the Finder and look for the options listed next to Apple Icon located at the top left corner of the Desktop screen and click on "Go" menu button and select "Utilities" option.
(Applications>Utiliites)
Locate Adobe Creative Cloud and Adobe Application Manager folder under Utilities window and trash both folders.
2)
Click on the below link and download & run Adobe Cleaner tool :
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up Selected" .
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordi on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleaner Tool.zip
3) Click on the below link and download Creative Cloud Installer file and use the same to install the Creative Cloud Desktop application.
https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg

Zen Stone Plus: does not charge/power on / isn´t reconized by my

Hi!?Bought a few days ago a zen stone plus but haven't tested it. Aboiut 2 weeks later I opened the boix and noticed the player does not charge, or power on and is not recognized by my pc as well...
What should I do? The shop where I bought it is about 600 km away from my home...
Regards?

Try it on another PC if you can to be sure the player is having a problem, if it does the same there then I would advise contacting Customer Support so they can assist you.
Cat

Creative ZEN Vision: M 30GB not worki

I have a the mp3 player mentioned above, and for some reason its not working. I did the mistake of using it under Windows Vista Ultimate, and now its not working under XP Professional SP2. The device manager keeps telling me that the device cannot start. But I can use the device as it has some songs in it, and I just can't put more songs in it. At this point I am willing to do anything that may fix it, but I don't want to delete the videos, and songs I have in there. Can anyone please help me?Thank you. Stuserver.

I will refer you to this post by Catherina (Thank you!!!!)? Follow the directions carefully, and a Format means that all the stuff on the hard dri've will be erased (Except for the internal software needed to run the player)?and make sure to upgrade your firmware if the player works properly on your computer after the format. http://forums.creative.com/creativel....id=5530#M5530

My ipod touch has frozen with a white screen. None of the buttons will work to turn it off or take any action. Holding down buttons for 10 seconds plus does not work.Help

My ipod touch has frozen with a white screen. The on/ff and sleep buttons will not work whether pressed for a moment or held for more than 10 seconds as per help pages. When connected to computer it is not recognised and no indication in "devices".It has been working perfectly from Christmas until now. Was watching a TV prog via BBC iplayer when the image and sound froze for about 5 seconds then just white screen. Help

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Creative Zen stone with speaker not recognized by Vista 32

My creative zen stone with speaker is not recognized by computer. Downloaded starter pack and it worked, but the first time i disconnected it and connected again, the device is not in "my computer". It is listed as working properly under "safely remove hardware". Uninstalled drivers, and connected again, driver was installed and I am told the device is ready to be used, but it is still no where to be seen, and update tools etc. also does not recognize connected device.
thank you

Try going into "Control Panel->Administrati've tools" and clicking on "Computer Management". Find "disk management" in the left pane and click it. Your Stone should be in the right somewhere. I think you need to right click, then "choose dri've letter and paths" and give it a dri've letter with the "add" button. Let us know if that works.

4gb creative zen v plus does not work in vist

Similar Messages

Maybe you are looking for