4GB file in SEND folder under gwia7
I am using NetWare 6.5sp6 with GroupWise 7.0.3HP4 and I had experienced the
GWIA cannot unload successfully. This happen randomly and last instance are
8/13-14, 8/23-24. After reboot the mail server, there are 4GB file left
\wpgate\gwia7\send\. It can not reprocess after sit there for 1 day. My
questions are:-
1. Can we reprocess this 4GB file?
2. Can we know what is inside and if we can recover it?
3. How this file being created?
Pls comments, thanks.
Gilbert
Michael,
Thanks for your reply. This found out one user set an auto rule to forward
email and it somehow (not know the reason yet) create this 4GB file. The
only solution now is ask the user do not do this up until we can find a
solution on this.
Gilbert
"Michael Bell" <[email protected]> wrote in message
news:wLxFo.3111$[email protected]..
> On 8/26/2010 8:49 PM, Gilbert Wong wrote:
>> I am using NetWare 6.5sp6 with GroupWise 7.0.3HP4 and I had experienced
>> the
>> GWIA cannot unload successfully. This happen randomly and last instance
>> are
>> 8/13-14, 8/23-24. After reboot the mail server, there are 4GB file left
>> \wpgate\gwia7\send\. It can not reprocess after sit there for 1 day. My
>> questions are:-
>>
>> 1. Can we reprocess this 4GB file?
>> 2. Can we know what is inside and if we can recover it?
>> 3. How this file being created?
>>
>> Pls comments, thanks.
>> Gilbert
>>
>>
> Boy that sounds familiar to this aging mind. And yet I woulda sworn that
> was fixed. Are you SURE about your patch level.
>
> 1. It's corrupt, you need to whack it
> 2. no
> 3. A bug, as I recall.
Similar Messages
-
If i try d utility the areas i need like verify or repair etc are dimmed out. If i tryand reinstall it asks me which startup disk i,d like to boot from and there are no disks to choose from. Please help. P.s. im not fussed about wiping the existing m lion os and programs and starting from scratch if that what it takes.
WZZZ wrote:
I was under the impression that absolutely everything was retained.
Some third party software installs at boot kernel extension files that load when OS X boots, if there is a problem with these one usually gets the famous gray spinning wheel of death (also can be white or blue screen).
You can see what you have by pasting this line in Terminal
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Since the folder holding these is ~/System/Library/Extensions, when OS X is reinstalled those third party kext files are obviously not included, requiring those softwares to be reinstalled from original sources to put theirs back in there.
The #8 Reinstall OS X has the benefit of fixing OS X if it's the issue, removing all third party kext files, including outdated and no longer used ones, as well as replacing all bundled Apple software that comes with OS X (not including iLife).
When this is done with 10.6, the old version of 10.6 is installed, why it's important to Software Update right away for security and bug fixes.
On 10.7-10.8 now I assume the download is the most recent version of OS X as that would make sense. -
Applets in IE7 Protected mode ON is not writing files in %APPDATA% folder.
It seems like applets are having less permission to access files in IE7 running on Windows Vista. It is even stricter in Protected mode On.
We have couple of applets which write files in %APPDATA% folder under a particular directory. This was not working in Protected mode ON, but was writing the files in Protected mode OFF. We used System.getenv() to get the environment variable and constructed the full path.
Now the problem is that FileOutputStream.write() does not write the file in the given location. The location is some thing like this "C:\Users\<user name>\AppData\Roaming\<company name>\<file name>". There is NO exception thrown from the code. We checked that FileOutputStream.getFD().valid() is returning 'true'.
Any idea what could be the reason for this strange behavior? I tried with both JRE 1.5_06 and 1.6_01, both are failing.brewzer, thank you for brining this to our attention. I want to make sure that we are able to keep some memory space on your tablet. Can you please describe to me what kind of errors you get when you try to move the pictures or videos over to the SD Card? Please keep me posted.
KevinR_VZW
Follow us on Twitter @VZWSupport -
Archiving file in different folder in sender file adapter
Hi,
I have a requirement in witch i have to pick 7 different file from seven different folder.
for this I am using advance selection tab and defining all the other folder path.
but my problem is I have to archive the different file in different folder .
For exm..
/folder1/file1.txt need to be archive in /archive_filder1/file1.txt
/folder2/file2.txt need to be archive in /archive_filder2/file2.txt
/folder3/file3.txt need to be archive in /archive_filder3/file3.txt
can any one tell me that how to define the dynamic archive folder path??.
regards,
NavneetHi Navneet
In File Access parameters --> Target Directory
Use this type of Directory name
\XIDEV_STORES\%store%\sapoutbound
here %store% will be changed accordingly
e.g. if file will come for store 001 then this %Store% will be replaced by 001 and file will be placed in this 001 folder and if file will come for store 002 then this %Store% will be replaced by 002 and file will be placed in this 002 folder over FTP.
For to achieve this Go to Advanced tab
For Variable Substitution check mark Enable
Now speciofy the parameter values for Variable Name and Reference
Under Vriable name specify = store
Under Reference specify = payload:WP_PLU02,1,IDOC,1,EDI_DC40,1,RCVPRN,1 -
You have to give full path name here that where this store variable is located into IDOC.
Hope this example will help you
Regards
Dheeraj Kumar -
With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?
The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper. -
I just installed Camera Raw 8.7.1. It put the folders in a "Pug-Ins" folder under \Programs\Common Files. My Photoshop CC 2014 is in \Programs\Adobe\Adobe Photoshop CC2014. When I try to open a NEF file from my Nikon D750, CC 2014 says it cannot open it; it is an unsupported file type. So what do I need to do? TIA, Rob
*** Moved to Photoshop Discussion Thread ***
-
I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.
Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam -
BPM: send 2 different files to same folder and then call RFC
Hi Gurus,
I need the design of this BPM:
2 files are pulled from an FTP site, and both placed in an SAP folder (no mapping required). Once both files are placed, then I will need to call an RFC.
I think in BPM for this:
2 receiver steps (for both files) --> 2 sender steps (for both files) --> 1 transformation (for RFC mapping) --> 1 sender (for RFC)
Am I ok with this?
The only concern is that as the first receiver step starts the process, then for a mandatory reason I don't know I need a correlation on the second. Can I avoid this? how?Good idea with the dummy correlation.
Does anyone know if I can use only 1 sender CC and get both files and then call the RFC only once? -
Combine files into one folder and send
How do I combine separate PDFs into one folder which I can attach to an email and send as folder? What adobe services do I need?
You cannot email folders, unless you compress the whole folder into a ZIP file. However, the zipped folder structure may not be compatible with other operating systems.
Better just place all PDF docs into one ZIP file and send it like that.
I don't think Adobe has any tools that can help you with that; unless Adobe Send contains something similar. -
Zipping multple files and sending the Zipped folder to target location using Biztalk
Hi all,
I have requirement like
Seperate Xml files will be coming as incoming message to Biztalk
Biztalk need to send a zipped folder contining all these xml to target location
any link or component i can use to meet this requiremant plese help
regards,
VineethCreate or use the publicly available custom component for unzipping the received message and for send use another component to replace all attachments of a multi-part message
(multiple parts to multiple files to zip) for its zipped equivalent. If not multiple message use any zipping API to zip the multiple
files to zip file and send the zipped file in send port.
BizTalk Pipeline Custom Component Message Unzippper
Zip Files in a Custom Pipeline Component
Multi-Part Message Attachments Zipper Pipeline Component
BizTalk Multipart Message Attachments Zipper is a pipeline component
List of custom Pipeline component you can use
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
PDF files in sender file adapter
Hi,
Can XI pick up pdf files (.pdf) from a folder using File Adapter?
If yes can u send me some blogs on this?
Thanks in advance.Hi,
It can be done by bypassing the payload from Integrationg engine.In this case this case XI will not process the PDF file but jus picks up the file from sender side and places it on the target side with no translations and message processing.No IR is required in this case.ID is enough.The file go thorough Adapter Engine it self.
Jus follow the link provided it works.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/filetofilewithoutusingwithIntegration+Repository
But if u want to read the contents of the PDF also then there is no other way than writing the Javabased Moudle and configure it .
Thanks,
Ram. -
I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS. When I look in the library under the get info screen it says they are in the folder itunes music, under the c: drive but when I actually go to that folder to look for them they are not there....HELP!
Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling -
How to get latest added file from a folder using apple script
Hi..
I am trying to get a latest added file from a folder..and for this i have below script
tell application "Finder"
set latestFile to item 1 of (sort (get files of (path to downloads folder)) by creation date) as alias
set fileName to latestFile's name
end tell
By using this i am not able to get latest file because for some files the creation date is some older date so is there any way to get latest file based on "Date Added" column of a folder.If you don't mind using GUI Scripting (you must enable access for assistive devices in the Accessibility System Preference pane), the following script should give you a reference to the last item added to any folder. Admittedly not the most elegant solution, but it works, at least under OS X 10.8.2.
set theFolder to choose folder
tell application "Finder"
activate
set theFolderWindow to container window of theFolder
set alreadyOpen to exists theFolderWindow
tell theFolderWindow
open
set theInitialView to current view
set current view to icon view
end tell
end tell
tell application "System Events" to tell process "Finder"
-- Arrange by None:
set theInitialArrangement to name of menu item 1 of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
keystroke "0" using {control down, command down}
-- Sort by Date Added:
set theInitialSortingOrder to name of menu item 1 of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
keystroke "4" using {control down, option down, command down}
-- Get the name of the last item:
set theItemName to name of image 1 of UI element 1 of last scroll area of splitter group 1 of (window 1 whose subrole is "AXStandardWindow")
-- Restore the initial settings:
click menu item theInitialSortingOrder of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1
click menu item theInitialArrangement of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1
end tell
tell application "Finder"
set current view of theFolderWindow to theInitialView -- restore the initial view
if not alreadyOpen then close theFolderWindow
set theLastItem to item theItemName of theFolder
end tell
theLastItem
Message was edited by: Pierre L. -
FTP-File : move file from a folder to another
Hi experts,
Here is the deal :
I have a FTP folder (OS windows) where my files are stored. As I want XI to pick them one by one, I need a way to move them one by one in another folder of the FTP before message processing, folder that will be polled by XI
How can I do that ?
more concretly :
I have 5 files in a folder called Standard, files are named : TEST1_hhmmss.xml, TEST2_hhmmss.xml, etc.
I have another folder, lets say Standard_child that XI scans every 5 minutes. As I want my 5 files to get picked one by one every 5 minutes, I need a way on the FTP before message processing that moves TEST1_hhmmss.xml in folder Standard_child then XI picks up this file, and so on until all files are consumed.
Thanks a lots for any help, ive been struggling for days... so far I tried with a script that renames file before, but did not work on FTP...
Kind regards,
JamalHi
This site may be helpful
http://www.computing.net/answers/programming/batch-to-move-file-by-sysdate/14939.html
you can check the net for more answers
1) make a logic & ensure that ur script works fine in your sender system (where all files will be placed)
2) you can try it urself if you have access to the systems command prompt
3) use scheduler, of your sender system (you said it is windows) you can check help to see how you can schedule programs - there call your script.
4) now your script will send the files to child folder one by one as per your logic, which can be picked by XI
Regards
Vishnu -
How use PHP to read image files from a folder and display them in Flex 3 tilelist.
Hello. I need help on displaying images from a folder dynamically using PHP and display it on FLEX 3 TileList. Im currently able to read the image files from the folder but i don't know how to display them in the TileList. This is my current code
PHP :
PHP Code:
<?php
//Open images directory
$imglist = '';
$dir = dir("C:\Documents and Settings\april09mpsip\My Documents\Flex Builder 3\PHPTEST\src\Assets\images");
//List files in images directory
while (($file = $dir->read()) !== false)
if (eregi("gif", $file) || eregi("jpg", $file) || eregi("png", $file))
echo "filename: " . $file . "\n";
$dir->close();
?>
FLEX 3 :
Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="pic.send();">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.FlexEvent;
import mx.rpc.events.FaultEvent;
import mx.events.ItemClickEvent;
import mx.rpc.events.ResultEvent;
public var image:Object;
private function resultHandler(event:ResultEvent):void
image = (event.result);
ta1.text = String(event.result);
private function faultHandler(event:FaultEvent):void
ta1.text = "Fault Response from HTTPService call:\n ";
]]>
</mx:Script>
<mx:TileList x="31" y="22" initialize="init();" dataProvider = "{image}" width="630" height="149"/>
<mx:String id="phpPicture">http://localhost/php/Picture.php</mx:String>
<mx:HTTPService id="pic" url="{phpPicture}" method="POST"
result="{resultHandler(event)}" fault="{faultHandler(event)}"/>
<mx:TextArea x="136" y="325" width="182" height="221" id="ta1" editable="false"/>
<mx:Label x="136" y="297" text="List of files in the folder" width="182" height="20" fontWeight="bold" fontSize="13"/>
</mx:Application>
Thanks. Need help as soon as possbile. URGENT.i have made some changes, in the php part too, and following is the resulting code( i tried it, and found that it works.):
PHP Code:
<?php
echo '<?xml version="1.0" encoding="utf-8"?>';
?>
<root>
<images>
<?php
//Open images directory
$dir = dir("images");
//List files in images directory
while (($file = $dir->read()) !== false)
if (eregi("gif", $file) || eregi("jpg", $file) || eregi("png", $file))
echo "<image>" . $file . "</image>"; // i expect you to use the relative path in $dir, not C:\..........
//$dir->close();
?>
</images>
</root>
Flex Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute"
creationComplete="callPHP();">
<mx:Script>
<![CDATA[
import mx.rpc.http.HTTPService;
import mx.controls.Alert;
import mx.events.FlexEvent;
import mx.rpc.events.FaultEvent;
import mx.events.ItemClickEvent;
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
[Bindable]
private var arr:ArrayCollection = new ArrayCollection();
private function callPHP():void
var hs:HTTPService = new HTTPService();
hs.url = 'Picture.php';
hs.addEventListener( ResultEvent.RESULT, resultHandler );
hs.addEventListener( FaultEvent.FAULT, faultHandler )
hs.send();
private function resultHandler( event:ResultEvent ):void
arr = event.result.root.images.image as ArrayCollection;
private function faultHandler( event:FaultEvent ):void
Alert.show( "Fault Response from HTTPService call:\n " );
]]>
</mx:Script>
<mx:TileList id="tilelist"
dataProvider="{arr}">
<mx:itemRenderer>
<mx:Component>
<mx:Image source="images/{data}" />
</mx:Component>
</mx:itemRenderer>
</mx:TileList>
</mx:Application>
Maybe you are looking for
-
I think I can acomplish this with the gradient tool but it isn't cooperating. Basically, I've got a simple design of two men standing against a wall, and they are both traced in black. I am looking to flip flop the colors by making the background bla
-
IOS 7 Keeps Deleting Contacts!
I'm not one who normally jumps into forums and posts about problems. Normally, I'm very patient and understanding of glitches and system upgrades. This is the VERY FIRST TIME I've posted in the Apple support forums. This is VERY VERY VERY frustrat
-
Need to know the highest version of labview that was released for HPUX
Does anyone know the highest version of labview that was released for HPUX operating system ?
-
I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.
-
Hi! I installed oracle 8i and form 6i. I didn't have any problem in installation and I can use both very well. But when I tried to open the project builder, and when the project builder wizard comes, only "Welcome to Project Wizard" and letters in th