4GEE Action Cam - account access problem

Not sure if this is the best place to ask as it's more to do with the app you have to install on your phone to use the camera. But I am in the app, on the "Settings / Your Account " page, I press "Data Management" it says I need to be paired to the camera to view. So I turn on the WiFi and pair up to the camera, go back to the page and it now says I need to be connected to the 3G/4G network to view. So I am caught in a trap. I cannot have both WiFi and 3G/4G network on at the same time so how am I meant to view my account?

Hi
Sorry about that a bit of confusion there!
Right from what I found you can't check your data allowance via the app. You can see the data usage alert texts in Settings > Your Account > Messages.
You can purchase more data via the app.
But to view remaining data you would need to log in to My Account. Click Here for the help & Support pages.
Hope this helps!
Thanks.

Similar Messages

4GEE Action Cam file splitting

Hi all, I've just purchased one of the new 4GEE action cams and am using it out running or cycling. If i'm out for any length of time then the camera is splitting the video up into roughly 12 minute segments. Is there any way i can turn this off so that the entire video is recorded to one larger file as I have plenty of room on the memory card. EE said it was to do with protecting people's data allowances but I have my data turned off and I'm not streaming anyway. Thanks in advance

Hi (and , ), I checked in with someone on our Action Cam team and found the information below. I hope it helps! Let me know.
The camera supports FAT32 which is basically how the camera more efficiently stores memory. We’ve designed the camera so it splits files every 2GB of data making it easier for customers to download each segment. The camera doesn’t stop recording but for example an 8GB card would have 4 split files making it easier to download and edit those files.
So - I'm afraid you can't switch it off, as it's not a setting that can be changed. Unfortunately not. It’s a software thing so not a setting that can be changed.
Will that work out ok for you in the end ? Your feedback using the Action Cam is really useful so if there's anything from your experience which I can pass back to the team - I'm all ears!
-elena

Corrupt Files on 4GEE Action Cam

Hi Friends I have this 4GEE Action which to fair is usually a fantastic bit of kit, except I keep running out of data from streams but thats another story. Recently Ive been usng it with a 64GB Samsung SD Card and have done since having it. For some reason all my recordings past a certain point are corrupted and wont playback on quicktime or VLC (I should point out im using a Macintosh) I have re-formatted the card and that seems OK, Reset the action cam and that seems OK as well. The camera does pick up the full 7hrs of recording time and the 16K+ of photographs so clearly the memory is readable on the card. Is anyone able to shed some light on this? I go on a diving holiday in 10 days so would love to work this out. Many thanks for any help you kind people push my way.

ive got the excact same problem

Account access problems

I can't access my icloud account or iTunes store or even appStore when logged into my friends wifi (although the Internet access does work and I can surf on Safari here). What could be the problem with the wifi settings?

-_- need more information. DO you get an error when trying to access wi fi or app store? have you put your friends wi fi password in to the wifi settings?

Help...help...help! Uninstall/reinstall/account-access problems with my Suite

To Adobe support staff:
I'm having great difficulty trying to find the help I need and would really like to talk to someone at Adobe for which I seem to be unable to do anywhere. I spent great money on my products and nothing here or anywhere will help. This really bugs me here that we are being forced to have to go through this damn forum as I can't get the direct help I need and this delays my progress.
In particular, I've been having trouble trying to uninstall my product as it keeps looking for files that don't exist anywhere and so refuses to uninstall. I had the problem in the first place because when I set up other computer accounts, my Adobe products refuse to operate under them (non-admin account) and recommended uninstalling and reinstalling, a drooling and burdensome process. But I am unable to uninstall all remnants for whatever reasons.
I tried using the adobe clear program too and the same thing occurs and so doesn't complete. I tried removing anything 'adobe' in all my registry files. I tries looking for the msi files that it demands in my installation package to no avail.
Please contact me, Scott Mayers at my account email I provided in my personal account. If there are more than one of me under my name, I'm the one from Saskatoon, Saskatchewan, Canada. It is annoying that I even have to publish this much just to get the help I need. I'm disappointed with Adobe for not giving us appropriate and direct customer help phone numbers when we purchase this at great expense.
Thank you.

I've been corresponding to someone who responded in email and they are only trying to convince me to upgrade to CS6 at a cost to me. I do NOT want to upgrade as I've already spent a large expense on the CS5.5 Master Suite and the Lightroom edition at the same time of purchase. Whoever is responding to me in email appears not to speak English clearly.
I'm using Windows 7 Ultimate and the above apps. As I mentioned to the guy in email, I am having trouble operating my product in non-administration accounts where I prefer to function for security reasons. There, the Adobe products are giving me an "Error 6" and insisting that I uninstall and reinstall again. I assumed that maybe this was due to me setting up my other accounts after I installed the Adobe Suite. I also was moving files away from the C drive in order to secure the files separately.
I tried the uninstalls and most of it worked except for the Adobe Acrobat and other remnants. I managed to remove as much as registry markers of Adobe and then also used the download that Adobe suggested to completely clean all Adobe material. This failed as it keeps looking of msi files in odd locations that don't exist.
I only have three remnants left: Adobe Content Viewer, Adobe Community Help, and Adobe Story. The windows uninstaller will not work nor does the cleaner. These are the indicated problems:
Adobe Content Viewer unable to uninstall.
Windows Installer:
The feature you are trying to use is on a network resourse that is unavailable.
Click OK to try again or enter an alternate path to a folder containing the installation package 'setup.msi' in the box belolw.
Use source:
C:\Users\(main admin account)\AppData\Local\Temp\flaAC337.tmp\
X The installation source for this product is not available. Verify that the source exists and that you can access it.
Adobe Community Help unable to unistall.
C:\Users\(admin)\AppData\Local\Temp\fla7002.tmp\
Same as above but upon clicking okay instead of 'cancel':
!The path 'C\Users\(admin)\AppData\Local\Temp\fla7002.tmp\setup.msi' cannot be found.
Verify that you have access to this location and try again, or try to find the installation package 'setup.msi'
in a folder from which you can install thie product Adobe Community Help. [OK]
Adobe Story
C:....\fla45E6.tmp\
Adobe Widget Browser
...flaBF69.tmp

Icloud account access problem

so I've just moved from USA to Canada. Before I moved, I changed my apple ID that was associated with my old ISP to a gmail address. Now when I am trying to restore my iphone, I am getting prompted to accept terms to icloud that was associated with old address. When I go to try to reset password, it is not listed as a valid address...but I am still getting prompted for it on my devices when they try to access the cloud. I can't delete the account, because find my iphone is enabled...and without the access to the account I can't login to turn it off... It all seems to be related to icloud access only...
I can access my account with the gmail info just fine.
Hope that makes some sense!!???!??

Same problem here. Apple suppport guys haven´t been able to solve it. They told me to wait and check if it starts working again.
Someone knows how to get it orking again?

Account access problem

I woke up this morning hoping to download, like quite a few others on this board, the Red Hot Chilli Peppers new album. It seems that I have no account registered with iTunes. That's fine, I click on sign in next to account on the upper right hand of iTunes and then enter the e-mail address registered to iTunes and reset password.
I then receive an e-mail which provides me with a link asking me to enter a new password and confirm it. Done.
When I try to log in using that account and password it sends me back to where I was earlier saying that no Apple ID with this name has been used with iTunes.
Give Apple time to fix this problem or should I go and complain?
Powerbook G4 Mac OS X (10.3.9)

I've gotten the e-mail with the password for ticketmaster but it seems I still can not get the CD. This is infuriating. I hope Apple really does something to make up for this blooper if it is, indeed, their fault and not mine.
As to the password, they won't be playing in Florida.
Powerbook G4 Mac OS X (10.3.9)

Turin, Italy: iCloud mail accounts access problem

Italy Here: my iCloud email account has been off since yesterday...8:00 am.
That's a big, big, big problem....4 my work.
Some news about?
MaCs

Anch'io di Torino...è 3 giorni che non va la mail...rimane in sincronizzazione ma non completa nulla...all'inizio pensavo ad una manutenzione dei server ma adesso comincio a preoccuparmi...anche perchè uso la mail per cose importanti..vediamo se oggi passa
Same problem, don't know if it's a routine server manteinance or a serious one, we'll see after today how things are going to do, mail is always in sync

4GEE Action Cam Quest Test Competition

What kind of adventurer are you? Epic ice climber meets rugged bear tamer? Or more, let’s have a sandwich in the park type? Now you can find out. Take the Quest Test and you could win up to £1000 in vouchers for either Merlin Entertainments or Extreme Element. It’s easy, take the test and share your results to better your chances of winning. Entries close 31st August.
More details about the competition as well as terms and conditions can be found here: http://actioncam.ee.co.uk/competition

Is there anyway you can try to get more images/videos for the Battlefield Hardline? Personally I found BF4 a disappointment from BF3 so I am still 50/50 on even ordering this one.
Any news for PC GTA V yet?
I am not affiliated with Best Buy nor have I ever been employed by Best Buy. All of my thoughts and posts are of my own opinion and personal experience.
I may not always know the right answer, but I will always tell you what I do know. I also do free computer analysis and consultation via private message.

Action cam instructions

is there anywhere i can download full instructions on how to use acrion cam? i'm able to connect via wifi but not data.

Hi,
Full instructions can be found here: https://ee.co.uk/help/phones-and-device/ee/4gee-action-cam/how-to-use-your-4gee-action-cam
Thanks,

Action cam mount problems

Hi there, I ordered 2 x mounts (EEACTTIP ACTION CAM ADAPTER MOUNTS) from your web-sit, They arrived today.The problem is, they are the incorrect mounts, you are sending out the packaging mounts- the ones that hold the camera inside the packaging box when you receive it.I just spoke to your distributors (Kondor) and they confirmed someone else had phoned up with this issue earlier, and there product control guy had looked at the product and confirmed this issue.Last time i checked a few minutes ago, they were still available to buy- and Kondor confirmed to me that they do not have the correct product in stock. So there is going to be 100's of these coming back. This needs to be sorted. I purchased this camera on contract to go alongside my ee phone data plan, with the intention of taking it to mexico for diving in 3 weeks, i need these additional mounts. Are the correct mounts going to be available, or is this a huge manufacturing error? Kind regards, Jamie Wiles

Hello bekti-bsd
The HP Action Cams all have a feature that can invert the picture orientation for using it as a dash cam.
HP does not have the specific manual available as you have noticed but the setting will be similar to the other models.
Look at this link for the ac200. It will give you an idea what to look for.
Scroll down the page about half way to the Settings Screen Display Information and look for the Up/Down arrows to set the orientation.
http://support.hp.com/us-en/document/c04021994
You camera menu may not be exactly like this, but you get the idea.
Hope it helps.

My iPAD cellular data plan. I no longer know which old e-mail I originally used to set up my account. Any info on how to recover a lost account access? The only thing on line is a lost password function but it send info an e-mail no longer valid..

My iPAD cellular data plan was set up with an old e-mail account and I no longer have access to this e-mail. The password is forgotten. I am unable to access my cellular data plan to update my 3G. Any help on account access when you no longer can remember the access information?

I called AT&T at 1-800-331-0500 and asked for Ipad support. They are going to send me a new SIM Card. This will solve the problem. Paul

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

10.5.8 Server, Lost All Account Access

Yesterday (6/2/10), all accounts accessing the server stop working (expired passwords supposedly - everyone). Just finished complete reinstall of server 10.5, setup new accounts and appropriate access privileges. All working nicely. Ran updates, including combo to 10.5.8. Ran one more group of updates including Java for 10.5 Update 7 - then ALL GONE! Only Local Admin access to the computer functions. All Server accounts are gone, wiped out, cannot log into server.
Anyone else experiencing this type of problem? Solution?
I'm suspecting Java Update 7 is culprit.

Have you had any progress on this issue? I just experienced the same thing and am getting ready to start the troubleshooting process.

Not enough access problem

Does anyone know how to fix the not enough access problem that came about after the upgrade?

Welcome to the discussions,
see this thread for a possible solution posted by
iphone3Gguy http://discussions.apple.com/thread.jspa?messageID=10991733&#10991733

4GEE Action Cam - account access problem

Similar Messages

Maybe you are looking for