4GLTE Saying Upgrade Available - Will Not Accept Password on Back of The Device as Password?

Does anyone know why it will not accept the MIFI password clearly on the back of the device to do the upgrade?

In this world of passwords I know how irritating it is to have these error message issues. I would be glad to help so you can use your device to the fullest!
The password on the back of the box is normally for initial setup only. Try the generic password of  "admin" If that doesn't work we will gladly further troubleshoot with you. What type of MiFi do you have? Here's a link to another forum post that has some great suggestions.
Thank you

Similar Messages

  • The upgrade version will not accept my 'old' serial number

    The upgrade version will not accept my 'old' serial number? 

    I have a CS3 DesignPremium.
    I have asked Adope if it was possible to update from this to CS5.5 Design Premium. The answer was, that it was ok for a price round 100 €.
    I bought it and under installation it wanted first the new serial number and next the 'old number' (because the old CS was not installed).
    The new one is not installed any where els.
    Im am working on a MacBook Pro.
    The number not accepted is the old CS3 number.
    Susanne Jørgensen
    /Stefan

  • I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks.  I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

    I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks.  I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

    You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
    Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

    When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem?  My printer does not have on-board Wi-Fi but, otherwise, works fine.  I shouldn't have to buy a new one.  Is there a OS patch out there that would open the printer port for my PC computers?

    I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected?  That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
    How is your network configured?  Bonjour as a protocol will NOT cross a router boundary.  If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
    You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router.  If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation.  The additional routers must be put into bridge mode, which is done differently depending on the router.  But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
    Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

  • I have been using my DEBIT card for over a year but recently I had to update my billing information, since then it will not accept my card. All the information is correct, it's just telling me to visit iTunes support. Can someone help me? Much appreciated

    I have been using my DEBIT card for over a year but recently I had to update my billing information, since then it will not accept my card. All the information is correct, it's just telling me to visit iTunes support. Can someone help me? Much appreciated

    Debit card? Are you sure?
    USA iTunes Store does not appear to accept debit cards - http://www.apple.com/legal/itunes/us/terms.html  "The iTunes Store, Mac App Store, App Store, and iBookstore services (“Services”) accept these forms of payment: credit cards issued by U.S. banks, payments through your PayPal account, iTunes Cards, iTunes Store Gift Certificates, Content Codes, and Allowance Account balances."

  • Photoshop Elements 10 will not allow me to back up the entire catalog.

    Photoshop 10 will not allow me to back up the entire catalog.  During its initial set up, when it runs the space needed, it stops at 18% and will not go beyond that
    Here is what I am doing.  In Elments Orgainizer, I am going to FILE, then selecting Back Up Catalgo to CD,DVD or Hard Drive, then I select- Full Back Up, then it goes to Calculate Total Media Space and that is where is stops at 18%

    Thanks for the response
    My OS is Win 7 Home Prem
    The catalog is over 60GB and over 31,000 images
    There are only a few videos in the catalog
    I am backing up to a hard drive that is a 2TB drive
    I can not even get to select the drive, as the system stops as it calculates the amount of space needed.

  • HT4103 Terminal will not accept typing or pasting after it asks for password.

    After enterin sudo command, terminal asks for password. After that it will not accept typing in password, I type and nothing appears. If I try to paste in password nothing happens.

    The password is never echoed (Displayed) into the teminal window. So after you type the password in hit the enter key or just let it work for the command you entered. When it is finished doing what you ask it to do with whatever command you typed in the normal prompt will return.

  • I cannot delete unwanted app from my iPhone 5.  They wiggle and show the X but when I press the X it grays our but will not delete or go back to the home page when I press the home button

    The icons wiggle and show the x but they will not delete when I press the X.  Also the home button will not cancel the action.

    Try doing a hard reset: Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    After this, try again to delete the app.
    If that doesn't solve the issue, you could also try backing up the device and restoring the device as new.
    In that case, follow the steps in: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
    If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
    Using his article will erase everything on the device, so make sure you have a backup!
    Good luck

  • Upgrade from 2007 to 8.8, upgrade wizard will not accept correct password

    Hi, I'm trying to upgrade several databases from 2007 to 8.8 SP00 PL17
    I have been successful in several. But I have one database where, in the upgrade Wizard, despite the fact that I am putting in the correct username and password, the status will not change from "Not Ready" to "Ready"
    I have tried two different super-users, including manager.
    I know the passwords are correct, because when i try to log onto that database in SAP, if I deliberately put in a wrong username/password, it tells me the username/password is incorrect. If i put in the correct username/password, it tells me I need to upgrade.
    But if i use that same username/password combo in the Upgrade Wizard, the status stays at "Not Ready" and as I have said, I've already upgraded several databases successfully, so i don't think its an environment issue.
    Suggestions?

    I figured it out. I tried to detach the database in SQL and saw there was an active connection to the database from WITHIN SQL. I killed the connection and the upgrade wizard took the password no problem.

  • My ipod will not let me download apps from the device and when i do it on itunes they wont sync either...

    My ipo will not let me download apps or sync them either.

    There are a million ppl having this problem right now and it seems like Apple is ignoring it. It's been real bad since May, even worse that last week or so. Basically all we can do is sit and wait to see what excuse or help, if any, will be given. I've used a Walmart pre-paid card and I'm sorry, but who really incorrectly types a 3 digit number a million times?! Also my account is saying I owe iTunes $40 for in-app purchases. Bull!! My card sends me a balance twice a day via text and because of this, I know what, where, and how my money is being spent. Also it's pre-paid, how can you have an over draft?!?! Here's a real kicker though...my card balance is in the positive!!! Hmmm, obviously not a fault on my part, the part of my card, nor my iPod. It's all in the system!!!

  • I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror to an AppleTV.  The devices will connect, but the video monitors show only a blank screen.  The AppleTV's work fine with various other iOS & OSX devices. Ideas?

    I have three AppleTV's where I work.  I have two at home.  I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay.  I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay.  I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror.  The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay.  This is true on both networks: at home and at work.  Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem.  I have tried to "Reset All Settings."  I have tried to "Restore."  Does anyone have any suggestions?  Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?

    No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
    The following information was helpful:
    Big Apple fan
    Re: AirPlay with AirServer connectivity problem
    Oct 14, 2013 9:43 AM (in response to ceb2652)
    This is an iOS 7 AirPlay mirroring bug...
    To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
    3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
    After this happens, mirroring to an Apple TV only projects a blank screen.
    Once the mirroring is hung, the only way to fix it is to restart the iPad.
    Apple please fix this iOS 7 issue!

  • HT5312 apple will not accept my true birthdate info to change my password. help

    trying to change my appleid password: but when I try, it asks my birthdate. when I input that,
    it says it's incorrect!!!

    What are you trying to update?  If you are doing an update your your computer after the update downloads you need to put in your user name and password of your computer.  If you are try to login to App Store/iTunes then put in your Apple ID and Password. 

  • I lost some info on my note book on my iphone 4s...i didnt sign up for icloud but when i do go there now it asks for payment info but will not accept my security numbe ron the back of my credit card

    I erased some info in my notes on my iphone4s and was then trying to find it in icloud but i cant get into i cloud until i put in payment info but payment info wont accept the code on the back of my credit card

    Hi..
    May not be just the security code >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • CS6 will not accept my condensed mic stating; 'the sampole rates of the audio input and output do not match.  Audio cannot be recorded until this is corrected.  Use the appropriate operating system or audio device control panel to adjust the sample rates

    !

    The first things we need to know in order to be able to help are what are your operating system and audio device?
    Also the FAQ Setting the Sample Rate in Windows Vista and 7 may help.

  • HT1212 Ive tried everything and my ipod still will not unlock, it goes back to the disabled screen

    Ive tried everything that apple has told me to do, but the ipod is still disabled!

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

Maybe you are looking for

  • Receipt in recent iTunes update

    My work recently issued me an iPod touch (the only reason I have an Apple product) and I purchased an app for work. I need a receipt to be reimbursed. I made the purchase over 72 hours ago and have not recited an email, and yes, I checked my junk mai

  • Blue Screen of Death (How's that for irony)

    I have a 160G ATV, and since the last firmware was installed, connected via HDMI, and every time I turn the system off for the night, the ATV comes back with a blue screen. The ATV become totally non-responsive; the LED in front blinks to inidicate i

  • Newbe requests help with audio for slide-show on Premiere Elements 4.

    I recently wrote you regarding a problem I was having with a slide show I was making on Premiere Elements 4 importing photo clips and music from PhotoShop Elements 9.  Thank you for your help. This very large slide show, some 200 clips that I have no

  • Problem in Currency Conversion of Labour costs

    Hi All,            In my system i have some MOs where object currency and controlling area currency are different .. Example : Our Controlling area currency in USD and MO is created in EUR .., Now when we select object currency and controlling area c

  • I need to downgrade from the version 1.1 to 1.0

    Just bought my new ipod nano 6th generation and everything worked great. a few days later it prompted me to upgrade to the 1.1 version. after the nearly half my library wont play on my ipod. ive tried a number of things to fix it with no luck so now