4k television and the correct processor
I purchased a Sony 930C for its ability to provide 4k programming. I am using an Onkyo SC3309 processor which was designed for HDMI 1.4. In order to get the best 4k, I am now told that I need a new processor, one designed to handle the new standard, 2.0 HDMI. I use an external audio system including my B&W 802 mains. Can I get away without replacing my Onkyo and if so, how? Otherwise, any suggestions about an appropriate processor?
You may have to run another optical cable from your receiver to the TV. I use Pioneer SC-85 receiver, it is hdmi 2.0 and works well with the Sony 4k (xbr75x850c) with full control including ARC. The SC-85 even has it's own 4K upscalling processor. Very stable and reliable receiver with no issues what so ever, also has a nice detailed documentation (Sony take note). Although due to android bugs it looses sync occasionally, very frustating. I have to recycle the TV power to fixt it.
Similar Messages
-
I have ATV2 and the correct version of ITunes yet when watching a movie from ITunes, ATV2 will drop it mid way through and then will claim home sharing is not activated in ITunes. Can anyone offer advice please?
yepp, I have done numerous tests today, skipped router and hard wired betwenn PC and appletv3. same problem.
same network, but from my laptop, works like a charm.. so its not reproducable on all machines.
this seems to be a itunes/bonjour problem, not ATV3 problem. -
I have entered the correct registration number for protection plan and the correct serail number but it fails. I am outside calling hours (as I dont have protectionplan lol) and am eager to get it up and running.
Call AppleCare during regular hours and they'll register it for you. In the meantime, there is nothing for you to "get up and running" except your computer, and you don't need to register AppleCare to do that.
-
Trying to understand blocksize and the correct sizing requirements..
I'm getting the following error after migrating a cube from a 9.3 environment to an 11 environment while running a calc script - which by the way works fine in 9.3 with identical cache settings.
Error: 1012704 Dynamic Calc processor cannot lock more than [2] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
When applying the following formula to our environment I get 122.84 Allocateable blocks, if my math is correct. The error is stating "[2] ESM" blocks so I must be doing something wrong?
Data Cache in K
______________ = Number of blocks that can be allocated
Block Size in K
block size 1651392/1024=1612.6875
Cache 198107
# of allocateable blocks 122.8427702
The settings from our config file are as follows:
CALCLOCKBLOCKHIGH 5500
CALCLOCKBLOCKDEFAULT 3500
CALCLOCKBLOCKLOW 100
CalcCacheHigh 199229440
CalcCacheDefault 104857600
CalcCacheLow 52428800
So what am I missing here, why the [2] ESM error? Is that a bogus error for a problem with the calc script I'm trying to run?
Thanks for your help.
Adam,OK, so even though I "thought" the setting survived a server restart I wen ahead and stopped and started the database and the settings applied and all seems to be good.
Thanks for the feedback. -
User exit name and the correct internal table/trans table
Hello All, I need to place a billing block on Sales order if the pricing condition of any of the order items is not a contract price (checking for pricing condition ZR00 in my case)
What is the internal table or transparent table that need to looped through to check the pricing conditions for each item in the order?
Is "FORM USEREXIT_MOVE_FIELD_TO_VBAK" in the include MV45AFZZ right place to do so? or is it at FORM USEREXIT_SAVE_DOCUMENT in the sae include program?
Thanking you in advance.Hi Syed,
XKOMV[] is the internal table wihch contains the pricing conditions.
And regarding the correct userexit, you need to determine the correct one, after which the XKOMV[]/TKOMVD[] are not manipulated anywhere else in the flow.
Regards,
Rajasekhar -
Ibase and the correct instance
Hi guys,
Lets say I have the ibase with me now, but how do I identify which is the right instance?
I have my ibase details in ET_REFOBJ from CRM_ORDER_READ.
But how do I select the correct instance for it?
Many thanks. Sorry but I m really new to ibaseYou will get it from IBIN table.
//Bhanu -
My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanksYou might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality). -
User error; didn't read correctly that it said "Intel Core Duo" for the 'About this Mac'. All set, sorry!
Message was edited by: anne234It would help if you provide all the error information. Sounds to me like you may not meet all the requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply. -
My profile pictures for my contacts somehow got switched on my iphone 4. The pictures are correct on icloud where I sync. Does anyone know what the problem is and how I can fix?
Try resetting your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
On a separate point, you may wish to consider updating your iPhone if you're still on iOS 5.0.1 as your post says. -
My MacBook Pro is up to date on updates and it's a Westinghouse television with a rocket fish hdmi connecting cord.
What MacBook Pro have you got? Not all MacBooks Pro can transfer audio through Mini DisplayPort, Thunderbolt or HDMI > http://support.apple.com/kb/ht4241
If you have connected the TV to your Mac through Mini DisplayPort or Thunderbolt and your computer doesn't support audio over that port, you have to connect external speakers -
Data for household and the correct router
We have 4 IPhones and 1 IPad in the house and we are now having trouble using the router in the house. It's not letting us connect from where we use to which was all through the house and or just not allowing us at all. Is there too much data being used in the household for the router I have? It is about 7 years old and is a Belkin N+ router
I would suggest a new router and or updating firmware on your existing router.
My wife has an iPhone and iPad and often seems to have trouble connecting to our home network. My android and our 4 PC laptops connect wihtout issue.
the amount of data from 4 phones and one iPad should not significantly effect a connection. -
Conversion Agent and the module processor
Hi,
i have to make an offer for a client of ours. Therefore i was thinking to propose the conversion agent for developing a process module into the inbound communication channel in the XI-Scenario.
But i think i understand sth wrong or does this module substitute the normal mapping inside the XI?!
Can someone give me a hand?!
thx in advanceJens,
Conversion Agrent is used to convert non XMl data into XML and vice versa.
For example it can read a PDF, EXCEL and conevrt it into XMl and also convert XML into EDI formats etc etc.
You use the conversion agent studio to develop the conversion mapping and then deploy it as a module. From the comm channel you call the Conversion Agrent Module which in turn runs on its own Engine and does the conversion for you.
So, if possible, you can also use conversion agent to actually read your source and create iyt in the format of the target and thgerbey replace Mapping. But, it all depends on the feasibility of what you are trying to do.
Regards,
Bhavesh -
I changed my security question and the correct ones do not come up
I forgot the answers to my security questions. I went ahead and changed them but when I went back to purchase and had to answer my security questions the old ones were still there. What is wrong...
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104820) -
agrdesco su ayuda si no me entiende muy bien aré todo lo posible para expicar de una mejor manera tal es tengo que volver a crear una cuent iCloud como se hace ?
Gonda...
Not just a language issue...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching your billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations."
From here > The Complete Guide to Using the iTunes Store | iLounge Article -
I've updated one of my contacts (to correct their email address) and the correction was made on my iMac (where I made the correction) and my iPhone, but not on my MacBook. All three devices are on the "cloud"...
but not on my MacBook. All three devices are on the "cloud"...
On the Macbook switch Contacts off then back on in System Preferences > iCloud then restart the Mac.
Maybe you are looking for
-
Post Author: Ralphred CA Forum: .NET Im trying to export a report to a .txt from within a vs2005 program, using CRXIr2. I have been able to export to the text file through code since the option to export to text isn't available for some reason when i
-
I want to use my own email and credit card and manage my own account but I don't know how to do this and I'm hoping that I don't lose everything on my iphone right now.
-
Ps CS5 "Print Page Setup" dialog will not open
Hello: I was printing via my Photoshop CS5. I accidentally created a paper size of 0cm x 0cm and attempted to print (up to this point Photoshop and Print worked). I now (permanently) get an error message: "There was an error opening your printer. . .
-
Hello, Do we have any Daily cash receipt report in SAP AR (Standard SAP) Nettem
-
Is there a method for suggesting apps that don't exist yet?
As a frequent user of call forwarding, it would be great if when I input a phone number it displays as one of my Contacts. This would help avoid mistakes, such as mistyping my home phone number; I might miss that I inputted one wrong digit, but if Ho