4Kmonitor and Apple TV compatibility

Hello!
I wonder to know if Apple TV 3 gen is compatible with 4k Monitor as Mac like
Sharp PN-K321
ASUS PQ321Q
Dell UP2414Q
Dell UP3214Q
Panasonic TC-L65WT600
Thanks for support:-)

If the monitor has an HDMI input then it should work with the Apple TV. Note however that you will not be getting 4k display but standard HD.

Similar Messages

Windows 8 and Apple product compatibility

Good Morning,
The other day, I went to purchase a new Windows-based computer at a non-Apple retail store. I would purchase a Macbook, but budget limitations. When I asked what Windows computer would be best for basic usage (managing IPOD, managing IPADs, managing music, and basic computing), I was told that Windows 8 is not compatible with Apple products. The retail personnel said that he had numerous returns of products because their Iproducts were not syncing (in fact he returned his computer). I have researched the communities and found that there are numerous solutions and reasons for the problem, but the variation in the answers leads me to think that the core issue has not been addressed.
Question:
1. Has the compatibility issues between Windows 8 and Iproducts been corrected? If not, is there any news of the compatibility being addressed in a future release?
2. What is the exact problem and how can it be corrected if I do purchase a new Windows computer?
Thanks,
Brian

Hi urbwebb,
Welcome to the Apple Support Communities!
iTunes is compatible with Windows 8 and you should have no issue syncing any device to a Windows 8 computer. The Windows System Requirements can be found on the following webpage.
Apple - iTunes - Download iTunes Now
https://www.apple.com/itunes/download/
I hope this helps,
-Joe

Windows 7 and Apple TV compatability???

I am having problems syncing my iTunes with AppleTV. For some reason it will begin the sync and 30 seconds to a minute later will disappear from the device lists. I was told from outside help it may be a sharing problem with windows 7 but have nothing to go on to show that as a problem. Any ideas?

Problem Solved!!!
I was having the exact symptoms stated at the beginning of this thread. After installing Windows 7 from Vista, Apple TV would show up in the device list and right after entering the verification code it would dissappear and wouldn't show up until I restarted Itunes. I did some research and found that if Apple TV doesn't have a solid connection it basically times out which explains the temporary appereance in the device list followed by it's mysterious dissappearance. At first I thought it might be something with the latest upgrade to Itunes so I started a download of Version 7 to see if that would work. I noticed that my download was only going at around 25k/sec and that was way, way to slow. As it turns out, when upgrading from Vista to 7, Windows 7 erases all of your drivers for things like video cards, network adapters, ect and does a clean install. I took my restore cd from vista and installed the missing driver for my Wireless LAN Adapter. My downloads went up to around 300kb/sec and viola!! Itunes synced up and is working great. It also works through a VPN and with Windows Firewall on as well as a 3rd party service. So if you upgraded to windows 7 take your old restore cd and updated all your network drivers. If you don't have the cd then get them online. This worked for me and I hope if works for everyone else having trouble. If anybody wants detailed instructions just let me know.

Iphone and windows 8 compatibility?

When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

I have no issues with Win 8 working fine with the latest (win 8 compatible )
iTunes

ILife 08 and iMovie 06 compatibility issues?

Sorry if any of this has already been covered in other threads...
Has anyone had a chance to thoroughly test the 6.04 version of iMovie (download version if you install iLife 08) and know what compatibility issues there are?
I.E. How well does iPhoto 08 play with iMovie 06, or iMovie 06 with iDVD 08. Are the third party plugins problematic with v6.04?
From what I saw at the Apple store, iPhoto08 and iDVD08 would be the only apps that I would really want since iMovie08 seems to be a step backwards and iWeb is still lacking in everything that I wanted improved. But I don't want to waste the money to discover all sorts of "gotchas" with trying to get iMovie06 to play nice with the rest of iLife08...
Also, has anyone done an install excluding iMovie08 entirely? Do you still need to download 6.04 if installed this way? Are there any pitfalls?
This is like Deja vu or something...When iLife06 first came out, I installed everything but iMovie and stuck with iMovie05 for a long time cause of all the bugs and how long it took to get the third party plugins working...

Of all the things for people to moan about with iMovie '08, the real unfortunate thing is it's inability to import effects, etc. (essentially your completed movie) from iMovie HD. One could somewhat forgive Apple for this debacle, if only it played nice with iMovie HD. Then it could be everything it's supporters say it is, i.e. "a different app," "a simple app for simpletons in a hurry" (although I find it's lack of tools and compatibility issues more difficult to manage).
...and a lot of us feel like this is the thing we're going to be stuck with going forward.
I keep thinking that something else is going to happen, because this can't be right. I think this diver/video engineer who came up with this concept is suffering from the bends.
Apple doesn't need the money, (as in making us buy Final Cut Pro for decent video editing), trust me, so I don't understand why it would take the PR hit.
iMovie '08 spoofs are already on YouTube, etc.
Message was edited by: rmig68

Universal dock and sector adapter compatibility

Hi,
is someone aware of compatibility issues between Apple Universal Dock and Apple sector adapter (plugged in the wall)?
I have bought my dock in the US and my adapter is French. I cannot charge my iPod through the dock when it is plugged to the sector adapter. Works fine when I plug the dock to my computer through USB.
Is this normal (maybe the dock are not the same in all the countries) or does my dock have a problem?
(I had posted a somewhat similar question on the iPod touch forum but I guess that this one is more adapted).
Thanks.

I have exact the same issue with the Apple universal dock except it is with a "made for ipod" product.
If I connect to Ipod directly it charges.
If I connect to dock and put Ipod on the dock, no go.
Anybody have the same issue?
Cheers
Cro

Final Cut Pro 4.5 and Quicktime 7 compatibility issues. Error 39!

I see some people saying Quicktime 7 is not compatible with Final Cut 4.5 and some saying it is.
I upgraded to 10.3.9 and then Quicktime 7 and I started getting error 39 at this one spot in my timeline and then crashing if I tried to play just a few seconds ahead of that spot. I tried trashing the prefs but that didn't do any good. The individual files play fine outside the timeline so it isn't corrupt media. I tried rerendering the effects that are at that point but that didn't help. I tried copying the entire timeline to a new sequence and that didn't help.
The strange thing was that when I took the part of the movie that was having trouble and deleted it from the timeline it still got error 39 when just playing over the empty timeline where the media used to be! This led me to realize that the problem lay in some Quicktime audio effects I had about a second in front ot the error 39 spot. I took off the effects from that audio but it didn't help. Then I deleted that audio from the timeline and just pasted it back in from the original clip and then it finally got to working.
Now I know nothing about the software, but I thought there might be some connection between the fact that I had effects that FCP labels as "quicktime effects" on there from my days in Quicktime 6.5, then upgraded to Q7, and perhaps those old effects don't work in Q7? I don't know.
So, my immediate problem is solved but I thought this experience may be of use to someone else. And perhaps some compatibility issues can be brought to light.

I would assume the Software Update program has sufficient logic within it to detect that my friend is running Final Cut Pro 4.0 and it would therefore be disastrous to install QuickTime 7.3, thus removing QuickTime 7.3 from her list of suggested updates. Would someone at Apple please fix this?
Sorry, but Quicktime is a component for SO MANY things, not just FCP. Sorry, but the OS doesn't detect that older versions of software are on there and won't be compatible...this is where you need to have a little knowledge. And sorry, but you need to have a little knowledge. If things are working, DO NOT UPGRADE unless it has been tested and cleared. In the case of FCP 4...it has not.
Rule of thumb...if you use older software, you have to stick to older versions of the OS and components that that software relies on.
How many things were broken with Vista? So many that the HUGE community let out a cry and now XP is available again configured on machines or as a stand alone buy. And no, Vista didn't warn that certain applications wouldn't work either.
You gotta research and find out. This place here...this forum...is a FANTASTIC place to find stuff like this out.
BTW...Apple doesn't read these forums, only us users. Gotta submit feedback here:
http://www.apple.com/feedback/finalcutpro.html
Shane

DxO Optics Pro and Apple Aperture workflow?

I'm wondering if anyone here has workflow suggestions for using DxO Optics Pro and Apple Aperture?
I've been using DOP for a couple of years now and love it, of course. I am just starting to use Aperture to catalog, sort and arrange a large collection of images. I would like to be able to import images on my drive into Aperture and keep them in Aperture's library, and get DOP to do its work in small batches when needed (essentially the "Scenario 2" workflow that is suggested in DxO's support section for using Adobe Lightroom.) But is that even possible with Aperture? Needless to say, I don't want to lose (during import into Aperture or export to DOP) the photo file information that DOP uses to do optics corrections.
If the workflow above isn't possible, I'm open to suggestions. If I must process ALL my images with DOP first, before importing them into Aperture, I can live with that, but it would be good to hear from some experienced users before I just assume I have to do that.
Thanks!
(By the way, I did read the other thread on here about DOP & Aperture, and it doesn't really go anywhere toward suggesting workflows. It just ends up discussion DNG files a bit, but that's about it.)

Hello All,
I've been working on getting this one figured out with DxO for the last week or so.
While I can't report that I have figured out the secret of the mysterious DxO OP & Aperture workflow (there doesn't appear to be one), I have figured out some key info that I needed to know to get started with Aperture, and continue using DxO OP.
First, the main thing that I became curious about... What EXIF information is lost when importing into & exporting from Aperture. I especially wanted to know what EXIF information that DxO OP needed to do its processing would be lost. (I know there are EXIF info viewers that I could use to check the info for myself, but I wanted to here conclusions from the source.)
The tests were done with the very helpful tech support folks at DxO. We ran 4 files through their fine tooth combs. Two files were straight from the camera, one file was imported (not referenced) into Aperture then I "dug" for it within Aperture's Library using "Show Package Contents", and the fourth was imported into Aperture's Library then I did a File > Export... > Export Master. (As Hud46/Dave guessed above) All EXIF was identical for all 4 files, so DxO could do its complete processing on any of them.
Many of you may have known this already, but I wanted to be sure.
Now, on the topic of a usable workflow for Aperture & DxO, I'm still working on that on. I'm guessing that I'll be finding out pretty much the same that you guys have mentioned here, that they don't play well (enough) together yet.
Allen, I agree that DxO does need to work on their compatibility with Aperture (as they seem to have done with Lightroom) so any feedback to them about that would be a good thing. Having been in touch with them a fair bit on this topic though, I have found that DxO sees Aperture as something of a "closed" system. I don't know what's up with politics of all this, so I'm just going to keep asking for the compatibility and let them sort it out.
Jack, Thank you very much for your workflow suggestion. I will give it a try and see how it works for me.
For what it's worth, I did just do a shoot for a client and used Aperture & DxO OP together. At first glance it looks something like what you did Jack. What I did, simply, was:
1) Downloaded images from the camera using Image Capture (I had already done this step actually) and put them in a folder.
2) Imported the images into an Aperture Library (for just this project) as Referenced Masters.
3) Sorted & rated them. Selected my Picks.
4) Exported those Picks as Masters.
5) Ran DxO Optics Pro on the Picks & saved the output.
6) Delivered to the client, then archived that Aperture Library, DxO's sidecars & output to Hard Drive & DVD.
7) Deleted all of it from my hard drive. (Why keep toting around, and having Aperture deal with in some way, 6+ GB of originals & thumbnails, etc when I likely won't need them all in that incarnation again? Hard drive may be getting bigger and bigger, but I can easily outshoot them.) Now, of course if I need to work with that shoot's Aperture Library in the future, I can't just work with in on the DVD, but at least I won't have to do my rating all over again.
Just thought I'd share that workflow in case it helps someone out with a similar situation.
Onward with the testing... I still have to figure out which way I should import my own main collection of images.
-Neil

Garageband Instruments and Apple Loops 1.0 update keeps repeating

I have OSX Yosemite 10.10.2 and Garageband 10.0.3. The auto update for Instruments and Apple Loops 1.0 appears and runs as an available update on a daily basis despite the fact that it has previously updated Garageband. Help please.

Paul,
I think what is happening is, that the update you are trying to install is meant for the new Mavericks compatable version of GarageBand - GarageBand 10.0. When the download finishes, it cannot be installed properly, because GarageBand 10.0 is not present. With GB 10 installed, these instruments download with no problem on my mac.
GB 10.0 is free on Mavericks - so, honestly, download and install GB 10.0 in addition to your current version. Let it download and install additional instruments and loops, launch it once to let it rebuild the loop index, then ignore it. The application does not need much space, and perhaps you may want to use occasionally the automatic drummer or the Arpeggiator. Before downloading GB10.0, make a backup copy of GB '09, just in case the installer should try to overwrite it.
After GB 10 installed the additional instruments, search for all places with installed loops in the system library and rebuild your loop index.
Rebuilding the Loop Index in GarageBand
http://support.apple.com/kb/HT1045

Error 103 when updating software (Garageband and Apple Loops 1.0)

My Macbook Pro (retina) keeps recieving an error(102) msg when trying to update the software that contains Garageband and Apple Loops 1.0

Paul,
I think what is happening is, that the update you are trying to install is meant for the new Mavericks compatable version of GarageBand - GarageBand 10.0. When the download finishes, it cannot be installed properly, because GarageBand 10.0 is not present. With GB 10 installed, these instruments download with no problem on my mac.
GB 10.0 is free on Mavericks - so, honestly, download and install GB 10.0 in addition to your current version. Let it download and install additional instruments and loops, launch it once to let it rebuild the loop index, then ignore it. The application does not need much space, and perhaps you may want to use occasionally the automatic drummer or the Arpeggiator. Before downloading GB10.0, make a backup copy of GB '09, just in case the installer should try to overwrite it.
After GB 10 installed the additional instruments, search for all places with installed loops in the system library and rebuild your loop index.
Rebuilding the Loop Index in GarageBand
http://support.apple.com/kb/HT1045

Currently have been using my ipad 2 to pull up emails from my verizon. Last week verizon updated to my Verizon 2.0 and I can not open my emails or scroll down on my emails. Called verizon and Apple and no one could help me open or access my mobile emails

Currently have been using my ipad 2 to open and read my emails from Verizon.
Last week Verizon upgraded to My Verizon 2.0 and it is not compatable with the ipad 2.
I can't open my emails or scroll down to read them. I called Verizon and Apple and no one can help me..
Has anyone experienced this same issue on their ipad?
Frustrated verizon ipad user.

You can also go to https://www22.verizon.com/ForYourHome/VZRepair/vziha/Service.aspx?ihaweb=EmailSe tup
and it gives you a step by step on adding your account. However don't use the server port number they give you because it does not work. I followed the same steps without changing the number and it worked.
The problem I have is that I can not see the folders I created on my Verizon email account, when I open it on my iPad. I have called Verizon & gone to the Apple store and neither had an answer except to say it was the other's problem.
Can any one help?

Home Sharing no longer works between iTunes and Apple TV.

I've been through all the forums, tried all the solutions provided and I have come to the conclusion that Home Sharing just no longer works between iTunes on a PC and my Apple TV. Does anyone know if this issue will be addressed or should I list my Apple TV up on eBay? (along with my iPad, iPod, and iPhone, since all system no longer sync together as before.)
My issue:
My iTunes library is no longer listed under "Computers" on the Apple TV.
The airplay icon no longer shows up in iTunes. (Version 11)
I cannot play music/content from my iPhone or iPad via remote that is stored in my iTunes library through my Apple TV.
I can however play music/content that is stored locally on my iPhone and iPad through my Apple TV.
My firewall settings are allowing access to Apple TV.
After logging into my router, I see no issues there.
I've logged in/out, turned home sharing on/off, de-authorized/authorized, and restarted my PC, Apple TV, and Router.
All devices are logged into the same iTunes account, and are on the same wireless network.
Time for a solution Apple.

If you turn off wifi on your Computer and connect it to the apple tv using an ethernet cable can you see your library under computers in Apple TV.
If yes the issue is with your wifi not the Apple TV
You may want to try the troubleshooting article
I also found this article
iTunes Home Sharing Not Working
Not working and sometimes when it is working, it cuts out in the middle, or when you click on the computer name, the focus goes away from the library. In other words, really weird.
What it is
iTunes has a feature called "Home Sharing" - it basically allows you to share your entire or part of your library with other instances of iTunes in your home network. It requires you to login to your iTunes account on both computers. A typical scenario is to enable Home Sharing on your desktop machine and then access the library from your iPad, Apple TV, iPhone, Mac, etc.
In my case, I have iTunes on my desktop machine running Windows XP in the attic with Home Sharing enabled and then I access the library from my Macbook and Apple TV, depending on what I want. How to use Home Sharing can be found here.
Symptoms
Home Sharing machine not showing up in Apple TV or the Macbook
The Macbook home sharing not showing up on my desktop
Home Sharing working intermittently
Connections getting cut of intermittently
Usually, restarting iTunes or the desktop computer will make things work.
Sometimes, restarting the Macbook or the Apple TV will make things work.
The "working" doesn't last long
The FixOn the desktop computer where the Home Sharing is enabled, I disabled the "QoS Packet Scheduler" from the network connection:
Open Control Panel
Open Network Connections
Right-Click on your connection (in my case, it was "Wireless Network Connection 4"
Select Properties
Uncheck "QoS Packet Scheduler"
Click OK
Restart iTunes if necessary
After doing the above, Home Sharing worked like a charm.

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

Did a clean install 10.9.4. on a stock Fusion HD. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX in every dev/disk** How do I fix? Any help would be much appreciated, thank you

Did a clean install 10.9.4. on a Apple Stock 1TB Fusion Hard Drive. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX" in every dev/disk** Everything is out of place, How can I repair? Im willing too reformat if need be, however thats what I did in the first place. Any help would be much appreciated, thank you.
I know this cannot be correct
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         999.3 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion                 *1.1 TB     disk2
/dev/disk7
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                                                   *121.9 GB   disk7

It appears as if my startup disk has been reversed and not using the fusion ssd portion as it should. At least its now reversed as to what it used to be originally before. the 128gb ssd used to be on top. Is my mac booting fusion correctly? Thank you for responding as I was about to reformat.
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group C2619AFE-0EB5-4721-8C50-3F3DBA520D1B
    =========================================================
    Name:         fusion
    Status:       Online
    Size:         1120333979648 B (1.1 TB)
    Free Space:   114688 B (114.7 KB)
    |
    +-< Physical Volume 583AAEA9-E333-4A83-9BE3-E937396E9248
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120988852224 B (121.0 GB)
    |
    +-< Physical Volume B0C1CB16-D46F-4387-A679-B55392BB7934
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     999345127424 B (999.3 GB)
    |
    +-> Logical Volume Family FB42B9F4-CB77-4162-831B-7DCB7816E760
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume C0B8479B-C51C-45BF-B59B-1AA5DF3A3B83
            Disk:                  disk2
            Status:                Online
            Size (Total):          1111826497536 B (1.1 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Fusion
            Volume Name:           Fusion
            Content Hint:          Apple_HFS
FoHeazys-Mac-mini:~ FoHeazy$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         999.3 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion                 *1.1 TB     disk2

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
Is anyone else having this issue?
I will soon loose my patience....
I have reset my phone three time and have reset network and other setting mutltiple times.

4Kmonitor and Apple TV compatibility

Similar Messages

Maybe you are looking for