4M Plus prints light for first few pages

My 4M Plus has been fantastic since I purchased it new. Recently, the first few pages print light. Once it gets 4 or 5 pages printed it is just fine, very good quality. If it sits at the ready for a period of time (I haven't timed it but seems like at least 1/2 hour) then it happens again. I've replaced the cartridge with same results. It has a page count of 75,689 and has never been in the shop. I fear it may be the fuser failing but other than that I have no clue. Any thoughts?
Thanks for listening.
Glenn

Dear GreedyDragon,
Replace the fuser unit and your problem will go away. The fuser is not reaching the correct temperature to fuse the toner to the page. If it's not fuseing the toner will smear and feel like its raised from the page. Let me Know how it turns out.

Similar Messages

Printing first few pages of report

Hi
I want to print only first few pages of a large output report.
Is there anyway to do this??
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by balagopal menon ([email protected]):
hi sridevi
ur problem can be solved as below
go to print previewer and click the print icon. A dialogue box with printer settings
appears where the no of pages mentioned.
<HR></BLOCKQUOTE>
Thank you Balagopal for your solution.
But this doesn't help me as the report is scheduled to run and is run from other concurrent programs...So i can't define the # of pages to print or kill the printer jobs.
Other than manually cancelling the job
is there any other way to do this???
Thanks
Sridevi

Dies after first few pages open

Everything works perfectly for the first few pages I open. After a few web pages are viewed it stalls trying to load a page and then nothing will load unttl I quit Safari and restart it. Then it works fine again for a few pages and stalls again. It doesn't matter where I browse. I'm always just a few links away from a total hang-up. All the menus still work. I can cancel the stalled page load. It doesn't help, nothing will oad once the stall ocurs until I quit and restart Safari. Very frustrating.
I've tried uninstalling and reinstalling three times. Same problem every time. I've never loaded more than 4 or 5 web pages without getting stuck like this.
I thought this might be a known bug, but I haven't seen anyone else complaining of this here or in any other forum.
Can anyone explain what could be causing this?

I just wanted to ask one more time about this persistent bug. The laptop this is happening on is a three month old Dell Latitude D620 with Windows XP Pro, Microsoft Office, and very little else installed. It's a pretty clean machine as far as I can tell. I've been studying this discussion forum every day and I can't find another complaint that resembles this behavior. Lots of people seem to have font compatibility problems, blank menus, commands that don't work, internet access getting flipped off, and crashes galore, but no one else has reported this weird problem with Safari consistently appearing to completely lose the ability to load any pages without a restart. I am a Mac user at home and a Windows user at work, so I would love to have Safari working on my office laptop. The problem isn't caused by the company network, because the same thing happens when I bring the laptop home and try it. All the fonts, menus, commands, etc. seem to be working perfectly. It just doesn't want to browse the internet for more than a few pages. In other words it's a browser that doesn't like to browse, even while IE is working just fine.
So before I give up on this forever, I will try asking this question: Has anyone out there had any similar experience with Windows Safari, or am truly I the only one out there with this type of Safari problem?

I am unable to print only the first few lines of an e-mail. Also, it will then print in a very small type and will also include extraneous information on the screen that are not part of the e-mail. Is there anything I can do about this annoying problem?

I can only print the first few lines of an e-mail, even when it is on "Full View" on my screen. Moreover, it prints with very small print that is hard to read and also contains additional material on the screen that is not part of the e-mail.
== This happened ==
Every time Firefox opened
== Since the first day I started using Firefox

I talked to Adobe Support tonight and found this issue to be a known problem with some of the Adobe Cloud products when using older hardware, in this case the C782.
So, we found a workaround. Unfortunately the work around isn’t efficient and adds more steps to their normal printing routine
Open InDesign and create, modify delete the card
Select FileàExport
A window will appear. Pick the location you wish to save the file
Once the File is saved another window will appear
“EXPORT Adobe PDF”
An Export to Adobe PDF window will appear. Accept all defaults. MAKE CERTAIN “VIEW PDF
After EXPORTING” is CHECKED
Select Export
Once EXPORT is complete the file will open automatically in Adobe Acrobat
Most likely the screen will be very large
Select the + - sign at the top of the page to adjust the page size to view the image
Select FileàPrint
The Print window will appear
Select the printer from the drop down
# of COPIES is just below Printer
Select OK
I hope this helps anyone who is having similar issues
Thanks

Laserjet 4 plus prints after 6 to 8 pages

The printer initially prints a blank page working up to a pretty good print after 6 to 8 pages, and prints fine if I continue to print. If I let the printer sit then try to start printing the same problem occurs. I installed a new toner cartridge, made no difference. I've taken the unit above the paper tray out and cleaned it. It looks fine to me. Could the heater button resting against the roller be taking time to warm up?
On a separate problem, I get a paper jam where I have to open the back flap and pull out the logged paper fairly often. I do have to use lighter grade paper for printing, or I get jams all the time. Thanks

Howdy joseigor,
As someone who uses my iPhone's camera almost daily, I know I would be distressed to find that suddenly the pictures I am taking are blurry. Let's see if we can get you back up and running.
I would suggest that you troubleshoot using the steps in this article -
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
In particular the section titled Your photos are blurred or out of focus.
Thanks for using Apple Support Communities.
Best,
Brett L

Scrub lag for first few rows of thumbnails

Here's a weird one. iMovie 09 (latest build) - the first few rows of thumbnails are really laggy when you drag over them or try to edit (spinning color wheel). But as you scroll down later in the timeline to "lower" rows, it starts moving just fine.
Trying to figure out what about the higher rows causes the slowdown.
Troubleshooting ideas already tried:
-restarted
-rebulding thumbnails and cache
-disk permissions
-no other programs running
-wifi/bluetooth off

Hello 7th-one,
Welcome to the HP Forums.
I see that you are having some printing issues.
I also see that you have ran the Print and Scan Doctor as well as the Install Wizard.
I suggest we try the HP Update Software Utility.
Let me know if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Downloaded new format yesterday and now when playing music the sound is low for first few seconds of each subsequent track. Is this a bug?

Under new format when playing music each track after the first starts in low volume then kicks in within 3 seconds. very irritating. is this a bug?

I'm having the same issue on my iPad (the "new iPad" / 3rd gen with retina display and 30 pin dock connector) after downloading iOS 7 (is that what you meant by the new format, updating to iOS 7?).
The music will play quietly for a few seconds then it will play at the volume it's supposed to.

Theme audio plays for first few seconds of menu before dropped audio

I created my first iDVD movie, and added a .wav file to the main menu. I also used a theme from iDVD4 (montage). When I preview the movie, however (and after burning, this is also on the final DVD), the theme audio plays very loudly for a few seconds while the main menu is booting up, before kicking over to the added audio. Is there any way to make this themed audio clip (which does not appear anywhere, all the audio wells have my added audio clip) disappear, so that I don't have to hear blindingly loud music for 5 second while the DVD boots up the main menu?

check out the following link (altho the topic is not yet answered) may help with your sceanrio as well:
http://discussions.apple.com/thread.jspa?messageID=4504981&#4504981

Slides have very low fps and laggy input for first few slides.

We are creating a project in captivate that is 50 slides long. The first 4 or so slides are very laggy and are very slow to respond. They have flash animations and they do not play at the full 24fps. After awhile (usually by the 6th or 7th slide, the lag stops and the animations start playing at 24fps, although they often pause in the middle of the animation).The first few slides do not lag if you manually jump to the first slide once the project has got up to full speed.
We are using flash animations, custom widgets that are modified versions of the "Flash Button" widget that comes with captivate, and text to speech audio on almost every slide. We are running the project locally, from the hard drive. The problem seems to happen only when there are button widgets (custom or the default Button.swf) on any slide. It goes away once they widgets are removed. The problem seems to still exist, but load faster when there are less slides in the project. I'm wondering if it has something to do with loading the button widgets, as it eventually goes away, like they are done being cached or something.

Hi
Can you tell me which version of CAPTIVATE and OS you are using? and provide me the screenshots of SWF SIZE AND QUALITY under PROJECTS in PREFERENCES

Can You have roman numerals for the first few pages of a document and then use normal numbering and start back at 1 for the rest?

I am writing my theses and want to start with Chapter 1 on page one,
Thanks

Menu > Insert > Section Break
and change the numbering in:
Inspector > Layout > Section > Start at: > uncheck Use previous headers and footers
Menu > Insert > Auto Page Numbers/Page Numbers
Right click on the Inserted number to choose its format.
Peter

HP LaserJet 300 M375 nw cancels print job after a few pages

I just received a new replacement MFP through the insurance I purchased through Office Depo. I have uninstalled and reinstalled the software on my desktop and my work laptop in order to get this one working. I'm on wifi with both computers. The printer is automatically cancelling my print jobs after 7 - 9 pgs when I'm trying to print 25 or 50 pages at one time. Also, I'm not able to get the "scan" icon to show up on my desktop on my laptop.

Hello! Could you please provide more information regarding the issue, such as which version of MAC OS X you are using? Any additional information such as error messages or lights on the printer will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

My HP ENVY 4502 won't print more than a few pages at a time

I'm having real trouble printing from my HP ENVY 4502. Over the last couple of months whenever I have tried to use double sided printing, when the printer comes to printing on the reverse side of the page an on screen message appears saying "Error printing on HP ENVY 4502" and the printer cancels the document half way through the page. More recently when I have tried to print multiple copies of a document on a single side the same message appears after 2-3 pages and the printer cancels the document.
I'm not sure what to do about this - I have tried various different settings on the printer but none seem to make a difference. Printing is now becoming very time consuming and I'm also wasting a lot of paper as a result.
Many thanks in advance for your help.

Hi Jamille,
Welcome to the HP Forums!
I have a couple of questions for you for starters:
What Operating System are you using Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
What happens if you plug in a USB 2.0 printer cable and print instead of wireless? Does the same thing happen?
I would suggest to go through one of these guides: (depending on the Operating System you are using.)
Print Jobs Stuck in Print Queue (Windows).
Print Jobs Stuck in Print Queue (Mac OS X).
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

PDF Printing, only returns first row/page

Hi
I can easy demonstrate my problem:
Let's say I make a report query called 'select ename from emp'
This returns something like:
<DOCUMENT>
<DATE>13-AUG-07</DATE>
<USER_NAME>VIDAR</USER_NAME>
<APP_ID>150</APP_ID>
<APP_NAME>APEX - Application Builder</APP_NAME>
<TITLE>emp</TITLE>
<REGION ID="0">
<ROWSET>
<ROW>
<ENAME>KING</ENAME>
</ROW>
<ROW>
<ENAME>BLAKE</ENAME>
</ROW>
<ROW>
<ENAME>CLARK</ENAME>
</ROW>
... and so on...
Then - I make an RTF document with a simple text saying "Hello World to you <ENAME>", and upload it to the application while creating the report query.
My problem is, when I now try to open the report through the link, it just gives me page 1 with: "Hello world to you King" - but not page 2 "hello ... blake" , page 3 "...clark" etc.. How can I make ApEx+BIP loop through the rest of the rows? Is it supposed to be like this?
What I want is ONE .pdf-file with several pages, not just the first result...
Regards,
Vidar

Hi Vidar,
Yes you can. Open up your RTF template, click View -> Toolbar -> Forms.
The first icon on the toolbar is a 'Text Form Field', click on that, then double click into the field that this creates. From there click 'Add Help Text' at the bottom and you can 'Type your own' from there.
Put a <?for-each:yourrowname?> at the start of your template
and
<?end-for-each?> at the end. The BI Publisher User Guide has a section on exactly this.
Cheers,
Mike

Macbook Pro I get a light for a few seconds then a blinking light, then nothing, no start up, nothing.

I can't restart my Macbook Pro after putting it to sleep. I now get a blinking light, then nothing. The computer will not start up, even after doing what is recommended in the mannual. Has anyone else had this problem? Were you able to solve it? How were you able to resolve it? Thanks for any help you can send my way. mt

Thanks for the help. Unfortunately I live a 5 hour drive to my closest Apple store, so making a "Genius" appointment is not possible at this time. I have tried re-seating my memory cards, I have also tried using the original memory cards that I replaced in favor of more memory. I got the 3 beeps and 5 second pause 3 beeps indicating that the RAM doesn not pass integrity check. Am I still at the "Genius" appointment? Thanks for your help.

Interactive pdf first few pages show okay then they show smaller in size. Any advice?

Have tried everything. Viewed on a mac, on a pc, always the same.
Page 1,2 and 3 are fine, filling screen. But from page 4 onwards, page shows much smaller.
Really need some urgent help please, on a deadline
Any advice appreciated

For 1. and 2.: concerning PDFs, there is no "on Mac" and "on iPad". Both are mere environments in which software runs. It depends entirely on which software you are using.
There is not a single PDF reader available for the iPad that supports everything Adobe Reader can do on a modern desktop. As for your "on Mac", you don't say so but I bet you are using OS X's Preview application, which is not by Adobe and also does not support any of the more advanced functions possible in PDFs.

4M Plus prints light for first few pages

Similar Messages

Maybe you are looking for