4s, 8.1.3, maps lost display, grid only

just updated 4S from 6.0.2 to 8.1.3
the when open the Maps APP there is no map displayed but grid only same as map is waiting to for data downloading..
tried to input an address, and route caculation and navigation still works well, but there is just grid displayed.
from the information bar it shows "data from TOMTOM, others"
any one have the same issue?

Try force closing the Maps app then test. If no joy try resetting your phone.

Similar Messages

Why is the map not displaying correctly on "find my phone" I am getting large grid squares on the map

why is the map not displaying correctly on "find my phone" on my computer. I am getting large grid squares on the map. I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

Welcome to Apple Support Communities
It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

How to get Hongkong Map to display 繁體 when cellpho...

How to set Hongkong Map to display 繁體 but keeping cellphone lanaguage in English?
I want to keep all interfaces in English, only local maps of China, Taiwan, Hong Kong & Macau to have street names in Chinese language (either 繁體 or 简体). The PinYin is an alien language to me.

Thanks farby. It is a pity there is no option to switch between the languages. Most locals here are bilingual and for some reason prefer to have the menus set in English but the maps. And those pin-yin names of places are not proper English names either.

How to display grid with appended rows?

Hello everybody,
I m trying to load a grid with items from EKPO for a given Purchase Order No.
Requirement is that when i enter the next Purchase Order number its items should get appended to the existing items(previous Purchase Order).
I have also populated internal table with APPENDING clause of SELECT statement,but when i try to display the grid only the first entries get displayed not the appended ones.
and i get an error "PROGRAM ERROR" for having used REFRESH_TABLE_DISPLAY.
can anybody help me in solving this problem.
Regards,
Sanghamitra.

Hello,
we had the same question and problem.
SAP told us via OSS the following:
"... The ALV grid in RSA3 will be supported with the PI_BASIS 2006_1_700.
But you have PI_BASIS 2005_1_700
Furthermore this software component PI_BASIS is independent from the
BW releases so that you can upgrade the latest support packages of the
PI_BASIS 2006_1_700 in source system"
So if you have PI_BASIS 2005 you won't have the functionality of ALV grid in TC RSA3.
(remark: At the moment I can not confirm that ALV grid in RSA3 is available with PI_BASIS 2006_x_xxx. We plan to upgrade in a few month.)
Best regards

How to display grid lines in list view please help

Hello,
What should I do if I would like do display grid lines in list view. I've read related topics but I stil don't know how to do it. I use Sharepoint Designer. Please help
Regards

Hi,
You need to modify default XSLT of listview webpart. Open your page in designer and use below jquery.
<!–ADJUST TABLE COLUMN WIDTH–>
<script src=”http://ajax.googleapis.com/ajax/libs/jquery/1.2.6/jquery.min.js“></script>
<script>
$(function(){
$(“tr.ms-viewheadertr th:contains(‘Title’)”, “#MSO_ContentTable”).css(“width”, “50px”);
$(“tr.ms-viewheadertr th:contains(‘Assigned To’)”, “#MSO_ContentTable”).css(“width”, “300px”);
</script>
Check this for more info about steps:
http://jshidell.com/2010/09/19/adjusting-sharepoint-list-columns-using-jquery/
You can also look into this MSDN article for more customization:
http://msdn.microsoft.com/en-us/library/ff630941.aspx#odc_sp14_qn_UsingSharePointDesigner2010WorkwithWebParts_CreateXSLTListViewWebPart.
Hope it could help
Cheers, Hemendra-MCTS "Yesterday is just a memory,Tomorrow we may never see"

MBPro w/Mini DisplayPort to Cinema Display w/only USB and Firewire ports?

I've searched the threads for something that will explain what kind of cable I need to use my Cinema Display with my MacBook Pro, and I'm not finding anything. The MacBook Pro has the Mini DisplayPort for video out, and the Cinema Display's only ports are two USB and two FireWire.
All of the video cables I've seen in the online Apple store are either Mini DisplayPort to DVI or Mini DisplayPort to VGA, neither of which would work. Tech support told me that the computer and the display are compatible -- can anyone tell me which cable I need?

I have been using the display for several years, connected to my G4 PPC Mac Pro. Now that I have a new MacBook Pro, I was thinking of getting rid of the tower and simply using the laptop.
The cord coming out of the back of the display is connected to the tower with both the DVI plug and two USB plugs. It didn't occur to me to look on that cord because my understanding was that there was a port on the display itself, and I always think of that cord as simply a power cord.
I understand getting a DVI-to-Mini DisplayPort converter cable, but the Cinema Display is apparently powered by the Mac Pro tower. Would a laptop be able to power the Cinema Display? And would I have to connect both USB plugs to the laptop? That would take up both of the MacBook Pro's USB ports.

Depriciation key and useful life periods in asset master should in display mode only

Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.

Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek

How do I set up an indicator to display for only 1 second?

How do I set up an indicator to display for only 1 second?
I am reading keys from a serial device and I turn on an indicator that corresponds to the key pressed
on the serial device but how do I set this up so that it only stays lit (enabled) for a second or two?
The indicator is inside of a case statement and turns on OK but I do not want it to stay on for more than
a second or two. How do I modify this to display for only a second or two?
(P.S. I am running an old version 8.2 and can only see vis that are 8.2 or older.)
thanks

Simplest way to turn the indicator off (false value) after a set time is to use a Sequence structure (flat or stacked).
Frame 1, set to true,
Frame 2, Wait ms (wire millisecond value to wait)
Frame 3, set to false.
This method, however, prevents the code outside the case structure from running during that wait time.
Something more elaborate will allow the external code to run. What comes to mind is a shift register that holds the indicator name and the time stamp (in milliseconds) when it was turned on, in an array of clusters. Each iteration of your loop will check this register to see if a certain time has passed (current time stamp minus turn on time). If so, use a case structure to turn the indicator off and remove the elements from the shift register array (so you don't keep setting the indicator to false). The array will let you control multiple indicators independently.
A problem with this option could arise from multiple readings. Lets say you want to turn it off after 2 seconds, but you read the value again after 1 second (this means the indicator should be on for a total of 3). The code would still turn it off after the 2 second mark. Of course this really depends on the time intervals involved with your code.

Display workorder   only related to   vendor selected in Vendor name UDF

Hi ,
I am using SAP 2007 PL 18 ,
In a Goods Issue Form I am created two UDF 1) Vendor Name 2) Work Order Nos .
Here queries related Workorder No. Display workorder   only related to particular vendor selected in Vendor name UDF .
Pl provide me FMS query.
Thanks
nitin

Hi Nitin,
My question is How you can know these Work orders are related to particular Vendor? Any relation is there between the Vendors and work orders?
Also what you calling as Work Orders? I think it is Purchase Order?
If it is PO, then try this
Select T0.DocNum from ORDR T0 where T0.CardCode = $[$OIGE.U_BPCode] and T0.Status = 'O'
The above query will show only the Open PO list. If you want all POs then remove the T0.Status condition.
Regards,
Bala
Edited by: Balakumar Viswanathan on Jan 3, 2011 11:13 AM

How do you display Movies only in iPhoto?

How do you display Movies only in iPhoto?

Create a Smart Album like this (depending on your iPhone model)
You'll see your iPhone pictures and all movies in the library.
OT

Air Display 2 only worked on mirror mode not second monitor

I'm using PC Win 7 enterprise and IPAD Air. IPAD Air installed with Air Display 2.
The Air Display 2 only worked fine when on 'mirror mode', but not working as secondary monitor. IPAD display colour in 'blue' and able to activate the keybaord.
Need tips how to fix the problem to work as extended monitor.

Hi Nagesh,
    Please check the following sample programs. It uses splitter container. I think this suits your requirement.
RSDEMO_EASY_SPLITTER_CONTROL
RSDEMO_SPLITTER_CONTROL
Sample code:
       split_container_left type ref to cl_gui_container,
       split_container_right type ref to cl_gui_container,
       splitter_h type ref to cl_gui_splitter_container,
       splitter_v type ref to cl_gui_splitter_container,
create object splitter_h
          exporting
          parent = cl_gui_container=>screen0
          rows = 5
          columns = 5 .
split_container_left = splitter_h->get_container( row = 1 column = 1 ).
split_container_right = splitter_h->get_container( row = 1 column = 2 ).
        create object splitter_v
           exporting
           parent = split_container_left
           rows = 5
           columns = 5.
Please award points if this is useful.
Thanks,
Srinivas.

Flip 8220, lost Blackberry PIN, only a 2 shows up on the options/status screen

Is there any solutions ?
After aprox 9 months working fine the phone suddenly lost its PIN, only shows up a 2 on the status screen. The internet and blackberry services by the wireless service provider are not anymore available (the services are active), the EDGE status is not in capital letters.
Can this be corrected to the original PIN number ?
Or is the phone just damaged ?
Thanks for any help

I have not heard of this. I've heard of the pin going to FFFFFFFF but never just to a 2. Have you tried removing the battery to reboot the device? If so, then I'm guessing the device is defective or has been disabled for some reason. Did you purchase the device new? If so, it should be covered under warranty if it's only 9 months old.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Requirement is OB52 should be in display mode only

Dear Experts,
In sap users profile sap_new is required but OB52 should be in come in display mode only on PRD system, How can I provide the t-code OB52 for Disply only.
Regards,
TVS

Hi,
If SAP_NEW given to any one,then we can't change it to display mode.OB52 is purely depend on type of
System.In PROD system it will come in change mode only.Where as in other Boxes like DEV/QAS,OB52 will be accessible depend on Client state(SCC4).
So I guess it is not possible in PROD box after giving SAP_NEW.
Rgds,
Durga.

SXMB_MONI displays Errors only

hi all,
Due to some reason SXMB_MONI is displaying ERRORS only even if I select all the messagse. Is there a config setting that need to be changed ?
Please advise, Thanks.
FS

On SXMB_MONI Screen, Make VIEW Button = Standard
Make Length of Output List for 2000.
Status Group & Status, Make these BLANK.
Date from - give date of 1 year back.
SENDER & RECEIVER, make it BLANK.
& RUN.

Page cannot be displayed message ONLY on the content area of the portal

Hi All,
I am using Netweaver Portal 7.0 and the portal works fine if logged in as an end user. But when I'm logged in as Administrator and whenever I try to create a portal object (iview or pages etc), I get a page cannot be displayed message ONLY on the content area of the portal. It is happening quite frequently, any clue what is wrong here?
Thanks for your help
-Mike

Hi
This could sometimes happen because of multiple users working on the same content .
Edited by: chandana kallu on Mar 11, 2008 1:41 PM

4s, 8.1.3, maps lost display, grid only

Similar Messages

Maybe you are looking for