4s camera has stopped working after just using it

I was using my camera for the 3rd time, recorded 2 videos and taking some pictures and then screen went completely black. Ive shut the phone off and turned it back on, and reset it a few times... and still no camera.. The camera to see myself is still working, but the camera to take a photo of something else is not working at all. After I reset it and then went back into the camera, this screen turned pink/purple for a brief moment and then went completely black, the square to focus on things just flashes.. I can take the picture but its all black.. The lens is clean, and I have not dropped it or anything like that. Any suggestions please?

Do a reset
Restart / Reset
http://support.apple.com/kb/HT1430
If no joy, make an appointment with the Apple genius bar.

Similar Messages

IPod Touch 5th generation front-facing camera has stopped working

After updating to ios 7, my front-facing camera has stopped working on my ipod touch 5th generation. I have tried doing a full restore to factory settings, resetting data settings, turning it on and off, and all the basic things. Here are a few pictures:
This is with the rear-facing camera, it works just fine.
Now this is the front-facing camera:
When i try to use the front-facing camera, the screen goes like this and the camera app freezes, i can't switch back to read camera or anything. Other applications like snapchat don't have a button to switch the camera.
It's like the camera app is detecting that the version of ipod has a camera, but it can't seem to find it. Btw, i live in Australia and am an apple developer.
I like srsly need to get my front camera working. Thanks
I am also using iOS 7.1 beta.

Likely a hardware problem as other has experienced the same problem
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My FaceTime HD camera has stopped working on my 2013 11" MacBook Air.

Recently, my FaceTime HD camera has stopped working. The green LED indicating that it's on will turn on for a second, then turn off. The camera is never activated, and it constantly repeats this cycle. I contacted Apple for help after I had tried repairing permissions, resetting the SMC, and reinstalling the OS as a last resort. I don't know what to do at this point. I'm running Mac OS X Mavericks, and the camera had no problems with the OS. The camera has just suddenly stopped working. Can anybody please help?

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
Acrobat did an update the ability to connect to files in the Workspace has been removed.
Is there any way to reconnect the file back to the Tracker?
Has anyone else had the same problem?
Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
enjoy free web..... :)
regards,
Gautam sharma.

Adobe Acrobat 9.0 has stopped working (after Start Form Wizard)

Downloaded Trial for Adobe Acrobat 9.0
Tried reinstalling
Latest windows 7 patches
Adobe Acrobat 9.0 has stopped working
(after Start Form Wizard)
Windows can check online for a solution to the problem
details"
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Acrobat.exe
Application Version:    9.0.0.332
Application Timestamp:    4850eb76
Fault Module Name:    MakeAccessible.api
Fault Module Version:    9.0.0.332
Fault Module Timestamp:    4850e54e
Exception Code:    c0000005
Exception Offset:    000e1059
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
===============================
===============================
SYSTEM INFORMATION
=========================
System Parameters
Available Physical Memory: 1429660 KB
Available Virtual Memory: 1912212 KB
BIOS Version: DELL   - 42302e31
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 8.00.7600.16385 (win7_rtm.090713-1255)
    Creation Date: 2009/07/13
    Creation Time: 4:43:32 PM
Default Mail: Microsoft Office Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win7_rtm.090713-1255)
Graphics Card: Intel(R) G33/G31 Express Chipset Family
    Version: 8.14.10.1930
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:25:18 AM
Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
    Version: 9.3.2.163
    Creation Date: 2010/04/03
    Creation Time: 10:57:52 PM
Locale: English (United States)
Monitor:
    Name: Intel(R) G33/G31 Express Chipset Family
    Resolution: 1024 x 768 x 75
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7600
Page File Space: 4194303 KB
Processor: x86 Family 6 Model 23 Stepping 7 GenuineIntel ~2493 Mhz
System Name: DELLINSPIRON
Temporary Directory: C:\Users\alan\AppData\Local\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 2097151 KB
Total Virtual Memory: 2097024 KB
User Name: alan
Windows Directory: C:\Windows
Installed Plugins
=================
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 1:59:50 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:05:18 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
    Version: 9.0.0.0
    Creation Date: 2008/06/12
    Creation Time: 2:08:24 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:17:10 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:00:30 AM

To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

Satellite T130: inbuilt web camera has stopped working

Hi, I have the same problem of the question bellow, like I have looked around and I was not able to find the answer I need.
I have a Satellite T130 and, suddenly, the inbuilt web camera has stopped working properly. A blue light is on, but there is no image. What can I do?
Thank you

Hi,
the blue light is beside the web cam, on the top of screen. But this light is on when I try to use the web cam in anywhere, like Skype, Msn or even in programs in the computer that only take a pictue or make a video of you, without ineternet (I do not know the name of this program). But it seems that computer and the programs recognize the web cam, because there is no messages when I turn on the web cam.
In Skype settings is the same, there is nothing wrong, there is no different message. The only thing is when I try to take picture a message appears: "failed", but the video seems to record normally, although everythng is black.
Could you understand what I meant?
Sorry about my english....

My built in camera has stopped working since Skype...

Since recent Skype updates the camera has stopped working - but it works in other applications. I am running on Windows 7 - do I need to uninstall and load n older version - anyone else suffering these problems?
Solved!
Go to Solution.

You didn't state what camera you are using. There have been some issues with Dell XPS models. If that is the case, the problem has not been resolved as of yet. You can try downgrading to an older release to see if the camera works once again.
You have two options to try to resolve this:
1. Try 3rd party software like manycam (manycam.com). See if your camera works in the manycam software. If it does, select the manycam virtual driver in Skype and see if your camera still operates with the latest release. If you go this route be sure to do a custom install to install only the main program.
2. Your other option would be to revert/downgrade to a prior release or a version that exists to address video/camera compatibility issues like the Skype special version:
Skype 6.3
http://download.skype.com/msi/SkypeSetup_6.3.0.105.msi
Skype Special Version (6.1.999.130):
http://www.skype.com/go/getskype-sse
Depending on which versions work may determine if the compatibility issue was introduced in the newest versions or if you camera is not compatible with the new way video is rendered (Skype 6.2 and above).

HT1338 built in camera has stopped working, how can I update or reinstall the drivers

Built in camera has stopped working, how can I reinstall the respective drivers?

Here are my best suggestions for your camera problem, Stephen:
• If you have not already done so, shut down Mac, restart,
    and try again. If the camera still does not work, continue.
• Try ALL relevant suggestions from Apple's Troubleshooting
   article: http://support.apple.com/kb/HT2090
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
   If you need to use the "reset" suggestion, use the correct reset for your Mac.
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update. For your Mac OS,
   the current version is at http://support.apple.com/kb/DL1640
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
• If nothing else resolves your problem, yours is likely a hardware issue.
   Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
Message was edited by: EZ Jim
Mac OSX 10.8.3

My macbook camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

My macbook (purchased in 2007) Mac OSX Lion 10.7.5 camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

If restarting doesn't fix, use the relevant suggestions from Apple's How to Troubleshoot iSight. If nothing else there works, the repair by an Apple-Authorized Service Provider suggested there and by spudnuty will get it sorted.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.10

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

4s camera has stopped working after just using it

Similar Messages

Maybe you are looking for