4s cannot see 5 ghz n...

Hi,
Just got my 4s today...it cannot see (or connect) to my airport extreme 5ghz n ssid, All other apple stuff connects to the 5 ghz n ok and/ or the 2.4 ghz.
John

http://www.apple.com/iphone/specs.html
Only connects via 2.4ghz

Similar Messages

One Machine cannot see 5 Ghz network

Hey folks;
Situation is this:
Have a 500 gb TC broadcasting 5 Ghz 802.11n only network. My MacBook Pro sees this network and connects to it fine. My partner's Sony Vaio running Vista does not see the network, at all! It's not even as if she can see it but can't talk to it but it just doesn't appear. Manually entering the SSID did no good (which I wouldn't imagine it would but had to be certain so I tried).
I've already checked with Vaio support and they were only slightly more useful in troubleshooting this than my cats would be.
To make matters more interesting, we have a Belkin N1 router broadcasting a 802.11n (b/g compatible) at 2.4 Ghz which she can connect to just fine without any problems. It goes without saying that the MBP can connect to any network.
The two networks, DK and DK5Ghz are using different channels (9 and 36 respectively) and I turned off wide channels (reluctantly) on the TC wireless.
The issue here is that the TC hosts the shared network drive (a Hitachi EAS) and the printer. No second, high speed network, no printer, no shares. Since the only wireless way of making the TC/TM combination work in anything like a timeframe I'm at all willing to deal with, I am loathe to make the TC network join the slower n/g/b network because I've noticed a measurable improvement in TM backup performance using the 5Ghz network (as I should). Any ideas any of you folks might have would be appreciated.
Oh and before anyone asks, I verified that the wireless card in the Vaio does support 802.11n (in point of fact, she connected to that network once but has been unable to do so since that first time).
Cheers
Adrienne

I am having a similar problem and could use some help. I have an new iMac and an older iBook G4 and recently purchased a 500 GB Time Capsule (TC).....here is the problem:
I have tried to reconfigure my TC to Radio Mode: 802.11n only (5 GHz) to get away from 2.4 GHz phone interference in my house. When I make this change using my iMac, the iMac can see and connect to the 5 GHz network. BUT my iBook G4 (1.42 GHz Power PC G4 with 1 GB ram and running OSX 10.5.4) can't see this 5 GHz network. When I switch back to the default 802.11n (802.11b/g compatible) network the iBook sees and connects to this 2.4 GHz newtwork.
I know the simplest solution would be to buy a 5.8 GHz telephone and keeps my network configured to 2.4 GHz....but before I crack open the wallet, is there any other solutions? Thanks.

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

I like to download e-cards with animation. . However, I cannot see the animation

I like to download animated e-cards, but cannot see the animation.

Rita, welcome to the forum.
It sounds like you need to install Adobe Flash Player.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I cannot see a new mailbox in mail with OS mavericks

I created a new mailbox but cannot see it. I saw somewhere in the support groups that I should look for user/library/mail folder but cannot find that either. I then decided to see if updating mail would help but when I started to install the update I got the message that my hard drive cannot support the update. I have an OS X 10.9.3 in 3.06 GHz INterl Core 2 Duo iMac with 12GB RAM and 130 GB of free space on the hard drive. Mail is version 7.3.

Might be corrupted Mail preferences after upgrading to Mavericks ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy / paste the following:
~/Library/Containers/com.apple.mail/Data/Library/Preferences
Then click Go. Move the com.apple.mail.plist file from the Preferences folder to the Trash.
Restart your Mac then try adding a new mailbox.

G5 Power Mac Cannot See AE Base Station

i've set up my airport express network and it is working fine with my iMac 2 GHz Duo - now in trying to connect my G5 Dual 2.5 GHz Power PC the G5 cannot see the AE using airport admin utility...
steps i've taken...
bought a replacement airport antenna for the back of the G5 Tower
placed the AE directly beside my G5 and scanned for it (nothing)
taken wireless security off
waited on hold for an incredibly long time for tech support
still the G5 can't find the network...
please help

You may want to double-check to see if you connected the antenna properly on the AirPort Extreme Card in your G5. (ref: http://docs.info.apple.com/article.html?artnum=108039)

Airport Extreme Base Station cannot see with Macs

Out of the blue my Macs are experiencing a problem seeing the base station network. I can see it with my iPhone. I have a PowerMac G5 duel core 2 Ghz and cannot see the base station or it is sporadic. System says that the airpot card is recognized on my G5. Other Macs on network experiencing the same issue. Tried turning everything off and restarting. This only works part of the time.
I am on Cox cable service using the modem then the airport. Any suggestions? Thanks for any help in advance.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

I switched from an iPhone to a Galaxy s4. Everything seems ok except text messaging with people who have an iPhone. I can send them a text, they can see it, but I cannot see what they text back. What can I do please?

I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging. I can text, they can see it, but I cannot see their response if they are using an iPhone. Can you help me with this? What do I do please?

Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC
Please keep us posted, and let us know if this resolves your issue!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Cannot see table in sql developer or sql plus

I have created a record in application designer. I have then built the table. I can close the record and then find it again in application designer. But if I go to sql plus or sql developer, I cannot see it. Am I missing a step?

You probably can see all the tables of sysadm because someone else give you proper grant for that on existing sysadm's objects.
For the new or modified object (drop+create) you should :
1. connect as sysadm and run
grant select on new_table_name to your_own_user;2. connect with your own user and run
create synonym new_table_name for sysadm.new_table_name;Then you'll be able to query that table without using schema name alias.
Some admin have also a ddl trigger to make it automatically.
You could also work through a role and public synonym if more than one user needs to access sysadm's objects.
Nicolas.

I cannot see XMLType table in sql*plus

Hi,
Although I have wokred extensively with Oracle, I am new to Oracle XMLdb. My problem is I cannot see the XMLType tables created under my schema. I can see the tables when I do a select from user_xml_tables. But if I do a 'desc' or 'select from', I get ORA-04043 or ORA-00942. I can desc an XMLType table owned by xdb. I am using Oralce 10g. Please provide a solution asap as a customer is waiting on this.
Thanks,
Jayati Ray

Raghu !!
GREAT!!!
It was a BUG in Oracle sql developer, I installed the new version v3.0, It WORKS like a CHARM.
Thanks a million for your help!!!
Cheers
Tony

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

Never mind, problem solved. When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually. Have a nice day @:-)#

I cannot see my Hotmail saved messages on my iPad 4. I do not have this problem on my iPad 2. All settings look identical.

I cannot see my Hotmail saved messages onmy iPad 4. I do not have this problem on my iPad 2. The settings appear identical.Any suggestions to cure the problem? Thank you.

My iPad 2 does exactly the same thing. But I just have to go on to my wifi options and you can either forget this network and then press it again or you can turn wifi off and on again and press that wifi.
Kind regards,

On my Mac pro I cannot see my iTunes library in my slideshow as a music selection

I cannot see my iTunes library in iPhoto to add music to a slideshow

Hi Mary3400,
I'm not sure which version of iPhoto you are using, but see if the troubleshooting in this article helps.
iPhoto '11: Add music to a slideshow
The top section explains how to, the second section is for if you don't see your iTunes library as a source.
Best regards,
Nubz

4s cannot see 5 ghz n...

Similar Messages

Maybe you are looking for