4s contacts post-upgrade problem

So it might be my noob status as an Iphone user but I installed the update to my phone and now the contacts that were on my phone that I had synced from my Mac do not show up when they text and call. So for example all the contacts on my phone (both from mac and ones entered) show up in the address book as normal; however, when one of the ones I added from my mac calls or texts it shows up as just their number as if they are not an existing contact. I tried deleting all the contacts through sync on itunes and reloading them but that doesn't help the situation. What do I do?

I figured it out, it was my bad I had specified the path to include the apex directory which gets created when you unzip apex 3.1.
So I specified the path as apex3.1/apex/ which is APEX_HOME/apex. Instead I needed to specify only the base directory which was apex3.1
(wrong)
@apxldimg.sql /apex3.1/apex
(right)
@apxldimg.sql /apex3.1

Similar Messages

SBA 8.0 (Hor) to SBA 8.0 (Ver) Industry Application Post Upgrade Problem!

Hi All,
I am testing out an upgrade from Siebel 8.0 (Horizontal) to Siebel 8.0 (Vertical) version.
Post upgrade after GUI Fixes, i did a full compile of siebel_sia.srf!
But, after i start my Siebel Services & try to access the Sales or High Tech Manufacturing Application, it doesnt come up.
The log file for both says:
"siebsrvr\log\SSEObjMgr_enu_0025_26214410.log 8.0 SIA [20405] ENU
ObjMgrSRFLog Error 1 00000006486b09f4:0 2008-07-02 13:33:39 (cdf.cpp (668)) SBL-DAT-00142: Could not open repository file 'd:\sia80\siebsrvr\objects\enu\siebel_sia.srf'.
File does not exist or may be in use by another process.
ObjMgrCTLog Error 1 00000006486b09f4:0 2008-07-02 13:33:39 (ctxtmgr.cpp (4492)) SBL-SVC-00208: Please login first."
Any idea why this is happening? The SRF file exists on the correct location & i dont see any other application accessing the same.
Regards,
Shalabhsneha

Double-check with Siebel Tools that is the same file.
Check that the new Siebel application is shut down properly and has no "dangling" processes before restart.

Pertaining Watches thread in Post Upgrade Problems Forum

I have posted a question pertaining the watches, I'm not able to see the red indicator nor receiving e-mail.
Justin, sorry for the very late reply.
I didn't see your reply and now the threads are read only, so I had no other choice but to post here.
The threads I watch I am able to see them in the "Watches" in my Control Panel but I do not see the red indicator and I do not receive watches e-mail.
Thanks in Advance for your help.
Regards,
Tony

The watch e-mails have stopped since the first couple of days of the upgrade, back than I thought they were off, so I waited, but noticed no one was talking about it.
I checked my mailbox today and I saw a whole bunch of watch mails, some from Sunday 23 November and dated way back till 27 October, but none for this thread. It's weird, there are watch-mails for some threads and not for others.
Have you guys uploaded anything??
I haven't change the mail address from the control panel, at least not after the upgrade, but I might have edited that profile page to make sure of my handle, there were cases where the e-mail address was showing instead of the handle at post upgrade.
However I would want to change the e-mail where I receive the watch mails as soon as they start working.
oh! one more thing, I still don't see the red indicators for watches on thread list in the forums.
Thanks for your help guys, really appreciate it.
Tony

Post upgrade problem activating technical chains

Hi
After upgrade do version 7.01 I would like to collect and activate technical process chains.
During this proces I got error "Shadow object 0PAK_...... cannot be expanded; chain is inconsistant" and not all Infopackages were collected.
Any sugestion what is cause of this problem.
Adam
THX

Hi Dhanya,
Thanks for your reply.
When activating the process chain, I have selected all infopackages that were collected automatically by the system (with the option "In the Data Flow Before"). I also tried to find these infopackages myself in the Business Content (in ISIP (Infopackage) object type), still no success.
I also thought I could create these infopackages manually, but I have absolutely no idea on what they are expected to do: loading? From where to where? Activating data? Changing attributes? I don't know.
In RSPC I can see these infopackages as a step in the chain, but only with their technical name which does not help me to find out what is the source and target of that loading.
Cheers,
Csaba

WISM 7.0.235.0 post-upgrade problem?

I upgraded one of our WISM-1 modules from 7.0.98.0 to 7.0.235.0 last night. For some reason, APs don't join with it unless I tell them specifically to do so. We haven't specified primary & secondary controllers on purpose, allowing the APs to determine from DHCP & the controllers' responses and decide on one based on load. This has always worked great for us.
After upgrading, I couldn't get an AP to join the upgraded wism even after I specified the controller in the AP config. So then I changed my 6506 load balancing to src-dst-mac since that is a known (although seldom seen) issue with APs joining a controller for the first time. We usually keep it set at
src-dst-mixed-ip-port. That worked & the AP joined the upgraded wism. Then I reset the load-balancing algorithm on the 6506, removed the specific controller from the AP's config, rebooted the AP, and all is fine. I thought that solved it. Not.
Any other AP that I reboot tries to join the upgraded wism since it has only 1 AP connected, but it fails and the AP joins the other wism running 7.0.98.0. Even if I change the load balancing algorithm to src-dst-mac, src-dst-ip, or src-mac, it won't join unless I specify the upgraded controller, which I don't want to do. I can see the wism responding to the join requests, but the APs still end up on the other controller. It soulds like the years-old load balancing algorithm issue, but that doesn't seem to be the whole answer this time.
I hope this information makes sense to those that are aware of the issues I bring up. Any ideas why the 7.0.235.0 wism isn't getting APs to join it successfully without my specifying that controller? The config hasn't changed, except for what new or changed defaults exist. I suspect it might have to do with one of those.... Or could it be the two different controller versions returning confusing and different responses to the initial query?
Thanks.
Bill

We're not using the built-in DHCP service on the WISMs.
A wise decision.
I've upgrade our WiSM-1's to this version and we don't have any issues.
However, in the past, we use to host our DHCP server for the WAPs and the clients on a plain Linux box and we noticed that the Linux box took a painfully long, long time to dish out IP addresses to around 1k WAPs. We later moved our DHCP server to InfoBlox and the problems go away.
Any other AP that I reboot tries to join the upgraded wism since it has only 1 AP connected, but it fails and the AP joins the other wism running 7.0.98.0. Even if I change the load balancing algorithm to src-dst-mac, src-dst-ip, or src-mac, it won't join unless I specify the upgraded controller, which I don't want to do. I can see the wism responding to the join requests, but the APs still end up on the other controller. It soulds like the years-old load balancing algorithm issue, but that doesn't seem to be the whole answer this time.
Never saw this problem at all.

10.4.6 Upgrade - post upgrade problems

I have recently upgraded from 10.4.5 t 10.4.6. Since doing so, I have experienced several problems related to my internet connection etc. When Software Update runs, I always get a (-1001) timeout error and 'Software Update can't check for updates because of a network problem.' However, when I run network diagnostics, everything is normal. Similarly, I am having intermittent issues with my internet connection - sometimes it works sometimes it doesn't. When it does work it runs very slowly and sometimes the pages half load and just hang. I have tried using my wireless internet connection with my Windows laptop and everything is fine. I assume the problem therefore is 10.4.6 as nothing else has changed. I am a very frustrated user at the moment. Has anyone any thoughts?

Revert to a hardwire internet connection and see if that fixes the problem. If so, then do a search in these forums for "wireless" or "airport" problems.

Lost contacts post "upgrade"

My husband recently upgraded my iphone with the cloud when upgrading the ipad and now my contacts are gone. My photos and notes are still there - where do I look to find my contacts and reinstall them?

Resolved

7.6.2 post upgrade problems with some users only

Having upgraded to itunes 7.6.2 I am getting some weird problems. My user account itunes seems to work fine, but if my daughter logs onto the machine itunes will not access the store homepage - it just hangs and eventually gives error -50. Exploring a little more and it can be persuaded to get onto the store, but only throught the search page and then not to the music store!
Checking other accounts on the machine reveals the same pattern, one account works fine, the other does not.
It may be relevant that the two accounts that do not work are both childrens accounts with parental controls enabled.

Probably a firewall / parental control issue. If you temporarily disable parental controls, does everything work as it should?

Problems syncing contacts after upgrading to Windows 7

I used to be able to sync my Iphone4 with Windows Mail contacts without a problem. Stupidly upgraded to Windows 7 which pretty much forced me to go to Window Live Mail. Now my contacts on my iphone don't sync with the contacts on Windows live mail (contacts). Any suggestions? I'm fully prepared to accept user error!

I actually managed to find a way around my original problem:
When following operation fails:
Menu=>File=>Get Photos and Videos=>From Files and Folders
=>(open a network drive folder, in this case it was mapped to drive letter M:)
=>Try to select folder icon from Drive M with folder name "Photos" by clicking it with mouse
Result:
Selected folder disappears from list.
How to go around this:
Menu=>File=>Get Photos and Videos=>From Files and Folders
=>(open a network drive folder, in this case it was mapped to drive letter M:)
=> Write a folder name "Photos" manually to Filename: field => Press Open
Result:
Now folder was opened correctly.
So there just seems to be a bug in this PSE8 file selector dialog.

Problems syncing contacts since "upgrading" to Windows 7 (Live mail)

I used to be able to sync my Iphone4 with Windows Mail contacts without a problem. Stupidly upgraded to Windows 7 which pretty much forced me to go to Window Live Mail. Now my contacts on my iphone don't sync with the contacts on Windows live mail (contacts). Any suggestions? I'm fully prepared to accept user error!

Hi there
Sorry, but my crystal ball is on the fritz and my telepathy skills are sub par. Therefore I cannot deduce what version of RoboHelp you are using.
To my knowledge, only version 8 will work properly with Windows 7. If your version is older than version 8 you will likely need to download and install the Microsoft Virtual Machine with XP Mode in order to allow RoboHelp to function properly. This runs an XP environment within Windows 7. You must also have Windows 7 Professional or Ultimate. Home Premium doesn't allow you to use the virtual machine.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Given so many posts about problems, is upgrading to maverick worth it?

Given so many posts about problems, is upgrading to OS X maverick worth it?
I am content using Snow Leopard OS X 10.6.8. But my most recent Garmin GPS map updates returned a message that stated, "Mac OSX 10.6 is an older OSX version that is no longer compatible with modern software. We will be ending support for this operating system soon. To continue using Garmin Express, please upgrade your operating system."
As others have noted, you don't hear from the users who have installed this upgrade successfully. I've read about problems installing the upgrade and then incompatibilities with other applications once it is installed. Would appreciate your experience and thoughts. Thanks.

There are several excellent suggestions here.
What I did was clone my Snow Leopard drive to a second hard drive, then installed Mavericks on the clone.
I now have a working Snow Leopard drive as well as a Mavericks drive. I bounce back and forth between them.
I have symlinks set up so all my documents created on the Mavericks drive go to the Snow Leopard drive, but I have copies of all my applications on both drives. It just seemed easier...
I had to disable App Nap in both Quickeys and Keyboard Maestro, but they both seem to work well, and neither is the latest version. (Well, Quickeys is the latest version, but it's not a recent version.)
I only check email in Snow Leopard, never in Mavericks, so my Inbox is not scattered over both systems.
The Mavericks disk takes longer to boot, and it does occasionally seem sluggish, but it's not a deal-breaker. Like many, I have some legacy software I use, so I don't want to commit to Mavericks full time. But it's nice being able to use both.
I do like using Safari in full-screen mode, but that's the only program I use full-screen for.
Hope this helps.
Andy

Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

I can't add new contacts after upgrading from Snow Leopard to Mountain last week. I do not use iCloud. Any suggestions?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

ASU-process POST Upgrade Step on SQL database

Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
IS-OIL Application Test 600                                                 Optional
KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
CGPL: Entries are blank after upgrade                                                Obligatory
Error handling of task group execution                                Optional
Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Convert customizing for warehouse funds ctr scenarios     Optional
Various problems classification commitment items (class type     Obligatory
Unauthorized error messages udring fiscal year change/reassi     Obligatory
RFFMUDX1 migrates incomplete budgeting tables                          Obligatory
Non-7bit-ASCII character used for BCS key figures             Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory
Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
Activating VMC for the Internet Pricing and Configurator     Obligatory
Customer specific BSEG-fields not transferred                  Optional
Conversion of report headers in drilldown-reporting            Optional                                   600
IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
Conversion of CO-Total-Tables                                              Obligatory     46C                      500
Conversion of CO-line-item table COEP                                Obligatory     46C                       600
New General Ledger, problems in CO-documents                 Obligatory                               500
No receivers found in allocations                                          Obligatory     46C                        470
Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
Migration of process parameters in recipe management     Optional     110                        600
FAQ new depreciation calculation                                        Optional                                600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
Reloading Table T512W                                                        Optional
Converting Short Texts                                                         Obligatory
Migrating Data                                                                         Optional     4.7
Activating SAP ECC Extensions                                          Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay

Hi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit

Upgrade step ASU-process post upgrade step

Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
IS-OIL Application Test 600                                                 Optional
KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
CGPL: Entries are blank after upgrade                                                Obligatory
Error handling of task group execution                                Optional
Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Convert customizing for warehouse funds ctr scenarios     Optional
Various problems classification commitment items (class type     Obligatory
Unauthorized error messages udring fiscal year change/reassi     Obligatory
RFFMUDX1 migrates incomplete budgeting tables                          Obligatory
Non-7bit-ASCII character used for BCS key figures             Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory
Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
Activating VMC for the Internet Pricing and Configurator     Obligatory
Customer specific BSEG-fields not transferred                  Optional
Conversion of report headers in drilldown-reporting            Optional                                   600
IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
Conversion of CO-Total-Tables                                              Obligatory     46C                      500
Conversion of CO-line-item table COEP                                Obligatory     46C                       600
New General Ledger, problems in CO-documents                 Obligatory                               500
No receivers found in allocations                                          Obligatory     46C                        470
Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
Migration of process parameters in recipe management     Optional     110                        600
FAQ new depreciation calculation                                        Optional                                600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
Reloading Table T512W                                                        Optional
Converting Short Texts                                                         Obligatory
Migrating Data                                                                         Optional     4.7
Activating SAP ECC Extensions                                          Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PM

Hi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit

I cannot edit my contacts after upgrading to IOS5 .

I cannot edit my contacts after upgrading to IOS5 . I can restore to factory settings but I want to keep my messages as they were.. what can I do? please someone help.. thanks in advance.

HI MortenEJ,
Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
I still encounter the same problem. I have important messages in my inbox I want to keep.
I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

4s contacts post-upgrade problem

Similar Messages

Maybe you are looking for