4S + IOS7 = very slow photo selection

Since upgrading to IOS7, I find that on my 4S, selecting a photo is glacially slow.
By this I mean:
If I'm in the Photos app and want to forward, post to facebook, etc.  The little box with the up arrow.  If I hit that, there's usually a 30-60 second delay, and then I get the photo shrink and "next" button.  It's not a screen problem because that part of the screen works fine in other apps.
If I'm in a Messages app and want to select a photo to send, the Choose button takes a similar 30-60 second delay.
I don't have a ton of photos on my phone.  I tried removing all of them but even with a few photos the problem continues.  It's always when I go to select a photo.  Otherwise, the phone works fine.
Any ideas!?

Hi masterwil,
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

Similar Messages

  • Very slow Sub Select Query

    Oracle Version 9.2.0.7.0
    Sorry to ask what is probably a stupid question that only serves to highlight how useless my SQL is!
    I have this SQL which counts total requisition lines, and then counts how many of those lines have converted to Sales Orders:
    SELECT prha.segment1
         , (SELECT COUNT(*)
              FROM po.po_requisition_lines_all prla
             WHERE prla.requisition_header_id = prha.requisition_header_id)
                                                                      req_line_ct
         , (SELECT COUNT(*)
              FROM po.po_requisition_lines_all prla
                 , ont.oe_order_lines_all sol
             WHERE prla.requisition_line_id = sol.source_document_line_id
               AND prla.requisition_header_id = prha.requisition_header_id)
                                                                       so_line_ct
      FROM po.po_requisition_headers_all prha
    WHERE  prha.creation_date >= '03-JUL-2008';The SQL works, but it is really, really slow. Is that just because it is running through lots and lots of data?
    If I comment out the 2nd Count SELECT, it runs immediately. Perhaps it is so slow because the join between the po_requisition_lines_all and the oe_order_lines_all table is not via primary keys. Also, there is not an index on the oe_order_lines_all table related to the source_document_line_id field.
    I'm sorry I haven't provided the full table designs for the tables involved - but the primary keys joining the requisition tables = via the requisition_headers_all table, and the join via the po_requisition_lines_all and the oe_order_lines_all table is not via a primary key or an index.
    Sorry once again, for probably talking nonsense.

    Please note this is a untested code as you didn't provide any of the required information like
    a) Test Data
    b) Relationship between the tables
    You could try something like this. But as already @someoneelse suggested it is definitely worth reading the link.
    select prha.segment1, count(case when prla.requisition_header_id is not null then 1 end) req_line_ct,
    count(case when sol.source_document_line_id is not null then 1 end) so_line_ct
    from
    po.po_requisition_header_all prha,
    po.po_requisition_lines_all prla,
    ont.oe_order_lines_all sol
    where
    prha.creation_date >= to_date('03.07.2008','dd.mm.yyyy')
    and
    prha.requisition_header_id = prla.requisition_header_id (+)
    and
    prla.requsition_line_id = sol.source_document_line_id (+)
    group by prha.segment1;Regards
    Raj

  • Encore CS5 very slow when selecting the File tab

    Good morning.
    This is the first I have ever experienced this.  Encore CS5 is extremely slow when I try to select the file Tab.  All other tabs like Edit are fine.  It is also takes forever to Save anytime. I usually just use Encore for short no menu DVD's I'm building a DVD with a few sideshows and an hour of video. I haven't started the menu yet. I updated the latest from Adobe yesterday and I am current with the Window 7 64 bit updates.  All other applications in the Master Suite work fine.  I think my system should be enough to run Encore without any problems.  Any suggestions? I'm all ears!...
    CASE:  Cooler Master HAF 932
    MB:  Gigabyte GA EX 58 UD5
    VIDEO:  Nvidia FX 4800
    CPU:  i7-860 2.8 Ghz 8mb Cache
    COOLER:  Zalman CNPS9700LED
    RAM:  G Skill F3-8500CL7S Rip Jaw 24 GB
    HD: (3)  Western Digital  Caviar Black 2TB 7200/64MB/Sata
    HD: (2)  Western Digital  Caviar Black 500GB 7200/64MB/Sata built as RAID0
    HD: (1)  Raptor 500GB for Operating System
    SOUND:  Creative X-fi SB 1040EF
    OS: Windows 7 Home premium 64 Bit
    Thanks,
    Art

    Do you have Windows hard drive Indexing ON or OFF?
    Some Win7 notes...
    http://forums.adobe.com/thread/789809?tstart=0
    More Tips http://windowssecrets.com/comp/110127
    Utilities http://windowssecrets.com/comp/110106 (Soluto for startup)
    Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
    Win7 Configuration Article http://windowssecrets.com:80/comp/100218
    Win7 Monitor http://windowssecrets.com:80/comp/100304
    Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
    Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
    More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
    Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
    Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
    An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
    More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
    Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
    Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
    CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
    CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
    Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
    http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
    http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
    Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
    http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
    Harm's Tools http://forums.adobe.com/thread/504907
    Also http://www.tune-up.com/products/tuneup-utilities/
    Also http://personal.inet.fi/business/toniarts/ecleane.htm

  • Very slow photo download by USB with canon 6D

    Hi,
    As in topic I have problem with downloading the photos byt the usb. I am using the USB 3.0 port on Windows 8.1. Downlonding 8GB takes a few hours. This is inaceptable.  When I put the SD card directly to the card reader it goes very fast.  BTW my cards is 45/Mbs  fast. So is it normal or maby it is just my model. Anyway to fix it ?

    Skirball wrote:
    You don't need to use EOS utility at all.  Your operating system (e.g. Windows, whatever Mac uses these days, Linux, etc) can read the files on the computer and put them in a folder of your choosing to be read by whatever photo editing software you use.  Alternately, most photo editing software will import the files for you and put them in whatever filing system you choose.   When I put an SD card into my computer Adobe Lightroom automatically starts up and opens up an import dialog so I can choose what files I want to upload.  It will automatically put it in a folder titled with the date of capture unless I specify otherwise. 
    Before I started using Lightroom I just used Adobe Bridge, which is part of Photoshop.  I would manually copy my files from the SD card to the folder of my choice using Windows Explorer.  Then open the files in Bridge and edit in ACR and Photoshop as necessary.
    I'd just add that one thing the EOS Utility will do for you that the operating system won't is rename your image files on the fly. But that feature is usually of minimal value, since you can rename them with your photo editor (or the OS) as soon as you get them into a folder.
    Using a card reader, you can also rename the files on the card, but that may not be the smartest idea. Most people prefer not to make any change to an image file until they have at least one copy on the computer. It's too easy to accidentally delete something.
    Bob
    Boston, Massachusetts USA

  • Very slow when selecting objects

    I have a problem with illustrator CS5. Whenever I select an object on the canvas by clicking on said object Illustrator freezes for a few seconds (showing me the spinner). This happens whether there is 1 object or 50 on the canvas so it certainly has nothing to do with the number of objects. Oddly, if I click on the canvas and drag-and-select objects this does not happen; they are selected immediately. Of course most of the times I forget this and have to wait constantly because I accidently selected an object directly, which is extremely annoying and almost to the point of unworkable.
    Anybody got any ideas about how to solve this?
    Sys specs:
    MacBook Pro
    Mac OS X 10.6.7
    2.66Ghz Intel Core i7
    8GB 1067 MHz DDR3

    Many reasons, to help narrow it down create a new document draw one lement and let us know if you have a slowdown.
    Reset your preferences.
    Cmd-Opt-Ctrl-Shift when restarting AI on a Mac or Alt-Crtl-Shift on a PC to reset to the defaults.
    Flush Cache (Good for slowdown)
    delete users\(username)\library\preferences\com.adobe.mediabrowser.plist
    FONTS
    Fo you have alot of fonts loaded. You may have a corrupt font. Close any you do nto use often
    Permissions
    Run applications >> utilities >> disk utility and repair permissions.
    Ram
    Run applications >> utilities >> system profiler and check the status of your ram and hard drive
    HUH Error
    If the test you did in the beginining returned your computer to a speedy apce, search the forums for HUH error.
    OnyX
    Download onyx from apples site for your OS version and do the cleaning tab.

  • LOV is slow after selecting a value its taking much time to default

    Hi,
    I have a dependent LOV. Master LOV is executing fine and its populatin into the field fastly. But Child LOV is very slow after selecting a value its taking much time to default.
    Can any one please help me if there is any way to default the value fast after selecting a value?
    Thanks,
    Mahesh

    Hi Gyan,
    Same issues in TST and PROD instances.
    In my search criteria if i get 1 record, even after selecting that value its taking much time to default that value into the field.
    Please advice. Thanks for your quick resp.
    Thanks,
    Mahesh

  • New mountain lion update causing macbook to run very slow?

    New mountain lion update causing macbook to run very slow?

    Select Apple menu > About This Mac from the menu bar. How much memory is installed?

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • Safari on ios7 is very slow

    Safari is very slow after the ios7 update.  It is both slow to touch and respond and slow to execute the search.   I have a lot of book marks  maybe 100 in the book make bar.  I have cleared cash and history still very slow to respond to touch.

    Hello. This is my first time posting.
    My name is Mark.
    I suffered with this too! Both on my wifes Ipad and my new iphone 5S when I upgraded to ios 7
    Changing the favorites folder fixed the problem on the ipad and iphone BUT I still had hundreds (maybe thousands) of bookmarks stuck on my iphone.  Most of the bookmarks were duplicates. The ipad recoved a lot better and did not have the duplicate bookmarks.
    I started deleteing the bookmarks one by one on my phone but this was taking forever. I needed a better way but I'm not a super user and could not figure out how to just delete all the bookmarks.
    I stumbled across the CopyTrans tool for my PC.
    http://www.copytrans.net/support/backup-iphone-bookmarks/
    Basically connect your phone to the PC and run this program. Follow the instructions on their web page and you can then edit the bookmarks. After trying to delete them again one by one and not figuring out how to easily select them all, I simply selected the "Favorites" folder and then deleted it. Problem solved! The tool is kind of free but if all you do is just delete the Favorites folder then that counts as one action and you don't have to pay. At this point I'd gladly donate somthing to them for solving my Bookmarks issue!
    Ok I'll stop talking.
    Thanks,
    Mark

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

  • My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Help!

    My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Please help !!!!

    Thank you very much for your reply gdgmacguy :) I did all you suggested apart from restore as new device . Didn't know I could do that . After restore I did restore from back up only,  as I didn't want to end up without contacts details on my phone. If I restore as new device how do I get my all contacts? Still will have to use back up? Sorry if it sounds like I don't know what i am doing, i just have no one to ask who would know. Thank you

  • Very slow open cr2-photos

    After update to os x 10.9 mavericks, my macbook is very slow open CR2-files. In Quick-look or Preview.app - i have slowdown about 5sec, then photo opens. At 10.8 similar photos open instantly. Seems like something broke after update. My config: Macbook Pro 13" with Retina, Core i7 3GHz, 8Gb RAM, Intel HD 4000. Have ideas?

    I am having the exact same problem after just updating to OS X Mavericks. CR2 files take ages before they are shown. In 10.8 these exact same photos loaded very quickly (instantly). In Adobe Bridge these photos show up quickly as well.
    I am running a 13" Macbook Pro, Mid 2010 with 8GB of RAM, 2.4GHz Intel Core 2 Duo.
    Since I use my laptop mainly for photo editing, this is very frustrating. Hopefully there will be a fix soon enough.

  • Same select max is very slow in one program but fast in another

    Hi,
    I have a report that becomes very slow these few months. I used SQL trace for the report and found out its these codes that slow down the report:
    SELECT MAX( mkpf~budat )
                  FROM mkpf
        INNER JOIN mseg
                       ON mseg~mblnr = mkpf~mblnr AND mseg~mjahr = mkpf~mjahr
                    INTO posting_date
               WHERE mseg~werks  = w_matl-batch_reservations-werks
                     AND mseg~charg  = w_matl-batch_reservations-charg
                     AND mseg~bwart  IN ('261', 'Z61').
    The thing is these codes have been used in different system, DEV, QAS, and PRD. But only in PRD it is very slow, other systems are pretty fast.
    I even created a local copy of that report in PRD, with the same code. The local file runs fast and perfectly. But the original code is just slow.
    Just wondering if anybody met this problem too? any ideas??

    Hi Liu,
    Index creation is not a advisable solution.Please follow the existing indexes by adding Mandt field.
    Try like this
    SELECT MAX( mkpf~budat )
                  FROM mkpf
        INNER JOIN mseg
                       ON mseg~mblnr = mkpf~mblnr AND mseg~mjahr = mkpf~mjahr
                    INTO posting_date
               WHERE mseg~mandt = sy-mandt
                      AND mkpf~mandt = sy-mandt
                      AND mseg~werks  = w_matl-batch_reservations-werks
                     AND mseg~charg  = w_matl-batch_reservations-charg
                     AND mseg~bwart  IN ('261', 'Z61').
    Hope it will be helpful.
    Regards,
    Kannan

  • Preview very slow with .nef photos

    My preview works well for .jpg but not .nef.
    Open folder, select 'all' right click, open with 'preview'. Very slow & jerky.
    Used to work fine with .nef in Mt. Lion.
    Any ideas?

    Same issue here, and 10.10.2 brings no solution… Haven't you heard yet, Apple is the new Microsoft?!
    Anyway, here a few tips to speed up Preview at least a bit, so one can use it for work again:
    tip1:
    Delete /Library/Preferences/com.apple.windowserver.plist
    Delete ~/Library/Preferences/ByHost/com.apple.windowserver*.plist
    Shutdown OSX
    Startup, immediately press and hold the P and R keys while holding down the option (⌥) and command (⌘) keys before the gray boot screen appears, which resets the PRAM
    tip2:
    Turn off "Smooth Text and Line Art" in the Preferences. Of course, that's really sad, because PDFs then look terrible, but at least they are easier to work with.
    tip3:
    For just viewing, use QuickLook: in the Finder, select the PDF and hit [SPACE]. Strangely, QuickLook isn't affected by the bug.
    Anyway, those workarounds helped me a bit (thanks to those who posted them), but of course it's no proper solution. The last option would be to go back to Mavericks.
    I heard the problem was reported to Apple when Yosemite was in beta, summer 2014. Nothing happened so far. Apple really has to get its act together…

Maybe you are looking for

  • Stuck in License This Software loop - Adobe has no clue CC2014

    For weeks now, I've been stuck in a loop with having to "License this software" or "Start trial", when trying to start any CC Application. I started since i downloaded CC2014 and is happening also when trying to start my old CC apps. Have been on mai

  • Past one-time calendar events do not show up on synced Ipod Touch 2G

    In the transition of moving my old Palm calendar info (data since late 1999) to iCal on my Macbook and then on to Mobile Me, everything has gone fine. Nearly every single event has been accurately transferred to the Mac and then to the "cloud" with n

  • Using different monitors?

    Hello! I have an old G3 B/W that I was using an old dinosaur of a monitor with. I am running 8.6 on it because I mainly use it for my Agfa Arcus II scanner. I also have a PowerBook G3 Pismo and PowerBook G5. I have a 17" Studio display that I use wit

  • Usage of insert button in Std ALV toobar (OOPs)

    Hi Experts, I have developed an ALV(oops) with cl_gui_alv_grid. I have the std toolbar and do NOT want to disable it. what i need is when i click on insert button in std toolbar, i need to make a field editable. The func code for insert is &LOCAL&INS

  • How to determine SOST details

    Hi All, Can you tell me the table names from where i can find if mail has been received by recepient successfully or not from SOST. How can i determine the status of the message aswell. Thanks & Regards