4s Trouble Using Philips O'Neil Stretch Controls

I've used my Philips O'Neil headphones since iPad 2 was introduced and when I tried using the same headset on my iPhone 4s / Verizon model the remote no longer worked. Is anyone else having this issue? I reebooted the phone checked the connections and confirmed with then iPad 2. Headset works fine on the iPad 2. I used the stock apple headphones on the iphone 4s and the remote/mic work fine. My conclusions is that the input on the iphone is receiving the signal from the apple headphones and that the O'Neils may not be 100% compatible with iPhone 4s.
Any help would be helpful.

Similar Messages

How do I use the Oracle Developer Reporting Control in Visual Basic 6.0?

I was wondering how to use the Oracle Developer Reporting Control componant in Visual Basic 6.0 to generate reports in Oracle Reports? Any help would be appreciated.

Hi Rohit,
Would like to ask you some questions about the oracle report with Visual Basic.
1. I have a report built in oracle report. Currently there is a Visual Basic program want to pass some parameter to this report. Can Visual Basic program pass the parameter to this oracel report?
2. Based on yr answer, do i have to installed the oracle report? or just copy and register the Rwsxa60.ocx (i'm using oracle report 6i) in the PC? So can i use this activeX control.
3. Is this activeX control similar to Crystal report object which can found in VB?
4. Is there an example/guide on how the Visual Basic pass the parameter to oracel form?
Your answer will be much appreciated.
Thanks.
Regards,
Hock Leong

Do I need to set something when using Dynamic VIs to pass control values to an executable VI

I am using VI server to pass control information from one VI to another.
In the development system this works fine.
How ever once I build the VI's into an executable the values from one of the VIs does not get passed.
I use the same method in three different applications, 2 of the applications work fine, but one does not.
The only thing I can think of is that there is something that needs to be set that I did (without realizing) in the first two but not in the third.
All the Applications run fine.
The problem that occurs is in the values passed. The same value gets passed everytime this turns out to be what ever the default was prior to running application builder.
I a
m currently using 6.02.

Kandrew wrote:
> I am using VI server to pass control information from one VI to
> another.
> In the development system this works fine.
> How ever once I build the VI's into an executable the values from one
> of the VIs does not get passed.
>
> I use the same method in three different applications, 2 of the
> applications work fine, but one does not.
Are you using Call by Reference or Set Control Value method? The second
absolutely requires the Front Panel to be present to work properly. The
LabVIEW application builder wants to remove the Front Panel by default
if the VI hasn't been configured to show its front panel when called or
doesn't have at least one Control Property Node in its diagram.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

To run OHS at port 80 using solaris role based access control

Hi.
I already know & have done setuid root to ohs/bin/.apachectl to allow ohs to listen to port 80. Now on a new OFM 11.1.1.4 install, I want to use Solaris Role Based Access Control (RBAC) instead. Is it possible? RBAC does work as I can run a home built apache2 httpd at port 80 withOUT suid root.
On Solaris 10, I enabled oracle uid to run process below port 1024 using RBAC
/etc/user_attr:
oracle::::type=normal;defaultpriv=basic,net_privaddr
Change OHS httpd.conf Listen from port 8888 to port 80.
However, opmnctl startproc process-type=OHS
failed as below with nothing showing in the diag logs:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=truffle:6701
0 of 1 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=187636255,pid=25563)
failed to start a managed process after the maximum retry limit
Thx,
Ken

Just to add my two cents here.
The commando used on Solaris to assign the right privilege to bind TCP ports < 1024 is:
# usermod -K defaultpriv=basic,*net_privaddr* <your_user_name>
Restart the opmnctl daemond.
After that OHS/Apache user can bind to lower TCP ports.
Regards.
Edited by: Tuelho on Oct 9, 2012 6:05 AM

How can i use the ACL file to control the access from the other website?

Hello all~
My Sun one is 6.1 sp3 on Windows 2003 SE, and I am try to use the ACL file to control the access.
My ACL file is below:
version 3.0;
acl "path=my_path_on_HD";
deny absolute (all)
(user = "anyone") and
(dns = "*.my_site.com");
deny absolute (all)
(user = "anyone") and
(dns = "*.other_site.net");
Once I add the "deny", anyone include my site is decline for vist the path specify in the ACL file. But if remove the "deny", everyone include other one's website can access the file.
Can anybody tell me how to make it work?

I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
<Object ppath="d:/webserver/imat/pics_upload/*">
<Client referer="*~*amigoo.net">
PathCheck fn="deny-existence"
</Client>
</Object>

Can I use a midi console to control GarageBand?

Hi all,
I'll start off by saying I've never been a huge audio guy; just know enough to get by. Basically, I recently was given two consoles; Yamaha AW-4416 & Tascam TM-D1000. Both are slightly old, but new in box. At the moment I'm keeping both since I do school shows and such from time to time. They are really both designed around recording; and both also have midi out. Is there a way to use the midi out to plug into my Mac and use one of them to control GarageBand? I.e use the channel faders to control channels in GarageBand. I also have Adobe Audition.
Thanks

Is there a way to use the midi out to plug into my Mac and use one of them to control GarageBand? I.e use the channel faders to control channels in GarageBand.
As far as I know, Bob, Garageband automatically assigns midi CC settings, and there is no way to override these assignments. So while some of the faders and dials might end up controlling various things, there is no way to, for example, ensure that your controller's volume fader is assigned to CC7.

Use one fpga vi to control two targets

Hi,
I have two fpga because I need more than 8 analogue output and analogue input. I wonder if I can use one fpga vi to control two targets (the two FPGA boards I use are PCI-7833R) so that the outputs can be synchronized. I think if it's possible it'll be easier to implement the synchronization between while loops,etc. If it's not possible, how can I interface between between fpga.vi and make the synchronization possible and make two vi's talk to each other? Thank you very much for your help!
Thanks,
Charles

I have successfully ran the same code on two (2) different FPGA boards. The difference being that the host will use different Aliases to control the FPGA boards,
Both FPGA Boards MUST be the same type ( I used PXI-7811s).
My program consisted of 6 individual communication portals and there was NO synchronization between boards
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

How to use single element as both control as well as indicator in labview

Hi All,
I need to use single element for both control and as an indicator.
I need not want to use its value property os shift register.

Hi pmg,
I think this thread will be helpful to you.
http://forums.ni.com/t5/LabVIEW/Using-a-control-as-both-an-indicator-and-control/td-p/1113158
Thanks as kudos only

How to prevent others use their iDevices to remote control apple tv?

Hi All,
I'm wondering that does anyone know how to prevent others use their iDevices to remote control my apple tv?
settings
1. the apple tv is in the school.
2. all students could access the Internet
3. The apple tv is sharing the same Internet with students.

Welcome to the Apple Community.
The remote app uses homesharing, therefore anyone wanting to control an Apple TV with the remote app would need to know the home sharing ID and password.

Really confused here. I have somehow created both a managed account and an administrator account. The admin acct is now highlighted in system preferences. We are now blocked from using our computer because parental controls keeps popping up.

In attempting to add a music lesson program for my daughters band lessons we have messed up our computer. I now have both a managed account and an administrator account (both in my name). It is using the managed account now and not letting use the Internet because parental controls keep popping up. I would like to delete the managed account and get back to the admin account but I have no idea what my login is for the admin account. We have never had to use it before this problem started and what we thought it was when we set it up does not work. Any ideas?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

Is there a way to use the Tablet Remote to control a Sony Alpha DSLR Camera?

I own a Sony Tablet and love the ability to use it as a Remote Control. I also own a Sony Alpha DSLR...yet I can't get the remote control to control the Camera. Has anyone figured out how to do this yet? It's a little large, but would be amazing if the camera had DLNA and could automatically publish a photo on the tablet right after I took the pick...with the Tablet remote!!!
Thanks for any advice.

Hello Damon,
What is the exact model # of Sony Alpha DSLR Camera?
You can try “Learning from remote” feature if your DSLR camera is remote control capable.
Refer the following link for instructions:
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1023514
Camera should be DLNA server capable in order to access pictures from it using DLNA application in the tablet.
If my post answers your question, please mark it as an "Accepted Solution."

McAfee SiteAdvisor is no longer working with my Safari 8.0. I never had trouble using it with Safari before this latest version. Has anyone else had this problem?

McAfee SiteAdvisor is no longer working with my Safari 8.0. I never had trouble using it with Safari before this latest version. Has anyone else had this problem? I contacted McAfee support and they said nobody else is reporting this issue.

Wow, life is certainly tough for you.
S***t happens. That's why there's a warranty.

How to use radioButton(s) and image controls on windows phone 8.1

how to use radioButton(s) and image controls on windows phone 8.1

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I'm having trouble using Adobe Reader

I'm having trouble using or uninstalling Adobe Reader, i get a message when the programme has been anitiated which says Adobe Reader has encountered a problem and needs to close, i went on to Adobe's website and it said try uninstalling Adobe Reader and then re-install it as this sometimes works, i tried un-installing it from the Add or Remove programme but that didn't work either as i got another message telling me that the patch package could not be verified and to make sure i have permission.

Dear Mylenium.
Sorry i don't quite understand your reply, What do you need to know?

4s Trouble Using Philips O'Neil Stretch Controls

Similar Messages

Maybe you are looking for