4s with white spots -pixels- at top of screen

Purchased from Verizon 6 months ago. Do I take back to Verizon or to Apple?

Similar Messages

I have a gray screen with white lines at the top

I have a gray screen with white lines at the top what does that mean?

Hi,
Time to take it to an Apple store or Apple certified repair provider.
iPod Nano support here. http://www.apple.com/support/ipod/
Carolyn

My mac screen comes out with white fuzzy lines going across the screen, it used to just go back to normal and out of no where it freezes and the white fuzzy lines go across the screen. Now it is frozen at the opening screen. what do i do?

My mac screen is frozen with white fuzzy lines going across the screen. I shut it off and turn it back on but it still remains white fish lines on the start up screen. I've tried revolting it, it works sometimes but now its stuck at the starting screen. I have been at this for 2 hours to try and fix it but nothing has changed about the screen. What do I do, if I break this computer I'm screwed.

I would post a picture of the screen but I do not know how to do that

I have a padlock sign with arrow around it at top of screen

I have a Padlock sign with arrow around it on top of screen anyone know how to get rid of it?

You've locked the orientation of the iPhone. Double-click the home button, slide the screen to the left, touch the icon with the arrrow in a box.

White spot on my phone's screen

So last night I was playing some Peggle on my phone and I noticed that there was a white spot on the screen. It's not noticeable when watching videos, but it is really noticeable and distracting when I get to a dark scene in a movie or when I view pictures. This phone has not been dropped, hit, bumped, or anything similar. The phone is still under warranty, will apple repair/replace the screen for free or do I have to pay a fee?
Also: It is not a dead or a stuck pixel. It's a discoloration in part of the screen.
Message was edited by: Hi Im Sonic

If they consider it to be a defect then you'll get a replacement right away. When I got my first iPhone 4 I noticed a small black spec underneath the screen. It was well was not a stuck pixel but perhaps dust or metal. I was worried they would not replace it as you had to look to see it, but once you knew it was there it was all you could see.
Apple saw the spec and immediately replaced the phone. The lady said to me, "A defect is a defect."

White spots on the Twist touch screen issue (pressure point)

Hi,
I purchased the Lenovo Twist two month ago.
Recently, I found three white spots (known as pressure points) on my screen,
so I sent it to the depot for warrant service.
The service center said the white spots were caused by a physical damage such as a strong pressure,
so it could not be covered by warranty and I should pay about $700 to fix it.
I am very careful with my laptop and do not believe the white spots were due to strong pressure.
If they were caused by a regular touching on the screen (since Twist is touch-available screen), it must be manufacturing defect.
Any suggestions for this issue? Or should I just give up and learn to live with them?

If anybody's reading this in the future, DP's advice definitely worked. I hadn't removed the video card originally. When I did, I noticed that it had so much dust in it that the fan wasn't able to operate. Embarrassing. Anyways, I cleaned it out and now the computer's running smoothly. A lot quieter too!
Renny

Ipod touch 4g White spot appears when Touch the screen

Hi,
I recently found out that when I touch the upper left part of the screen on my ipod touch a white spot appears, Why does this happen and would it be covered under The warranty? Never been exposed to water.

Anyone?

Dim Whit needs assistance with White Spot

I am using PSE 9 and a Mac. I am a new learner to photography and Photoshop. Although I have read, studied, and worked with tutorials, I am having great difficulty in having success with editing some pictures I took for my niece. She is getting married and does not have money for a photographer, so she ask me to take some photos. I have been unable to succefully use the clone stamp to fix the sun spot in the middle of the couple. Maybe I am going about it the wrong way, could someone please help me walk through how to fix this photo, then "I" can fix the rest of the photos that also have this problem. I would appreciate your assistance greatly, and I know my Niece will also.

It’s a difficult situation caused by camera lens flare by taking the photo against the light rather than keeping the sun behind you.
I think all you can do I to use the dodge and burn tools. Firstly the burn tool by repeatedly clicking with the mouse to gradually darken some of the areas within the spotlight. You may need to then select the dodge tool to lighten any areas such as skin which may become too dark.
These tools are nested with the sponge tool and if you keep pressing the O key you can toggle through them.
Alternatively use one of the filters to add more lens flare turning a mistake into a feature of sparkle!

Black screen with white blinking cursor at top left

Hi, i recently spilt water on my dv7 notebook laptop. I let it dry for a few days n then it switched on n it was fine. I was able to copy all files n pjcs to a usb drive. But the battefy wasnt charging n i had it plugged in at wall. But after a day or two i switchedit on n only got a black screen with flashing cursor. Ive tried all thef11 stuff n ran all the hardwarw tests n memory test n they all passed. Is there anything i can do to save it, feel lost without my laptop :-)

You fried your hard drive, get a new one and reinstall windows

White line appearing at top of screen on SD and some HD

I've noticed a white line appearing atop my broadcast watching SD and some HD channels.
I know this line is part of the broadcast signal which is responsible for closed captioning or some other technical aspects. From what I've researched, a TV's overscan should crop out that part of the broadcast, unfortunately mine is not.
Here's my set up:
Vizio VL320M 32" 1080P HDTV (receiving signal via HDMI from receiver)
Sony STR-DH700 Receiver (receivers HDMI switch outputting signal to Vizio TV)
Motorola QIP6416-2 DVR STB (connected via HDMI to receiver HDMI switch)
I can crop out the white line by setting my Vizio to Zoom1 or Stretch, though this distorts the image and is a pain to reset for channels which do not experience this problem.
I can also adjust the TV's vertical posistion up a few to get rid of the line, BUT when I switch HDMI ports to goto my xbox 360, then switch back to the HDMI port my cable is on, it appears that the STB resets my signal position and the line comes back.
I haven't tried component, and really do not want to switch from HDMI to component as some sort of work around.
If anyone has any suggestion to resolve this problem, please post. Thanks for any suggestions.

I think I may have narrowed down the problem. I believe it's a handshake issue occurring between my Sony receiver and my TV, though I could be wrong. Maybe some of you A/V experts can see otherwise.
I've come to this conclusion because of the vertical setting being returned to its default position upon switching ports on my Sony's HDMI switch. Keep in mind my STB is connected to a port on my Receiver's HDMI switch and my receivers HDMI output is connected to my TV.
I can crop out the white broadcast line by simply adjusting the vertical position of my screen up of few pixels. HOWEVER, when I switch HDMI ports on my receiver, then come back to the port my STB is on, the vertical position resets itself to the default position, even though my TV's vertical setting never changed.
Here's another possible confirmation. If I press the menu button on my Vizio's remote, immediately upon the TV's menu appearing the vertical position goes to the position that's set in the TV. Strange, but that's what leads me to believe there's a conflict occurring somewhere between my receiver and TV.
I have confirmed this behavior does not occur when I connect my STB directly to my TV. I can switch my TV's HDMI ports and the vertical position holds.
I contacted Sony support, and they want me to take my receiver to a service center. I doubt that there's a problem with my receiver that can be fixed, so I'm just gonna use a workaround by activating my TV's menu so the handshake can complete after switching HDMI ports.
Since I have a universal remote that's capable of macro layering, it's just a matter of programming a layered macro to goto my STB port then activate the TV menu to initiate the vertical setting. Maybe at some other point in time I'll lug my receiver in, though unless I'm positive it can be fixed, I really don't feel like pulling apart my home theatre and explaining this to techs if I'm not even sure it can be fixed.
If anyone else knows of a better workaround please feel free to post it. Thanks.

White blocks across the top of screen

My Iphone5 has a series of white blocks spaced uniformly across the top of the screen. When the phone is first turned on the blocks are not there. After a short time they appear and become denser. The phone functions perfectly, however.

Shiner, I had very strange things happen in a 6.0.3 project which I thought was due to the upgrade. Every title was rendered over a black background and an exported QT movie was rendered with an 'emboss' effect even though I had not set these options.
I moved the preferences (plist in user/libray/preferences) for iMovie to the desktop, still had the problems with the existing project but not new projects.
I redid the project from scratch with the 'clean' prefernces and it no longer had the strange behavior.

PSE 12 Organizer Problem with , Media, People, Places, on top of Screen

Thanks for your help. On the top of the Organizer in 12, it has tabs for Media, People, Places, Events. They all have stacks sorted by name. However only in the Events tab, does it show the photo of the first picture in the stack. The other Tabs don't show a photo of the first picture in the stack. How can this be corrected?

Please double click a people stack and move the switcher "Faces|Photos" to Faces side. This switcher appears on the left corner just above the media grid.
Here if you can see some marked faces, right click >Assign an profile picture.
If generic faces are shown, you need to see individual images and name face rectangles in them as explained here-http://helpx.adobe.com/elements-organizer/using/adding-people.html
Thanks
Andaleeb

After hard drive failure Premiere Elements 9 loads with only tool bar at top & grey screen below

I have uninstalled & reinstalled. Tried to load project but program tells me it has to close

I have uninstalled & reinstalled. Tried to load project but program tells me it has to close

A lot white spots in LCD screen Mac Pro

Hi,
I just bought mac pro 13-inch online directly from apple for only about 4 month, and today I found a lot white spots in the top left screen, it really make me fell unease, can apple replace the LCD? Thanks.

Yes, Apple can replace it. You've a one-year warranty - three years if you purchased AppleCare. Take your machine into your local Apple Store or an AASP and have them take a look at it.
Good luck,
Clinton

A little white "spot"

Hi,
I've got a 15 inch macbook pro that I purchased in late 2007. As I was looking to the left of my screen I see what can only be described as a little white "spot". I wiped the screen and it's still there. What is this? What can I do about it?

You don't say how big the "spot" is but it sounds like a dead pixel. What can you do about it? Not much other then have your display replaced. Luck of the draw I guess as I've owned many a MacBook and never had a dead pixel on any of them. I do have two 30" Cinema Displays and on one of them I have a dead black pixel but it is so tiny it is of little annoyance.

4s with white spots -pixels- at top of screen

Similar Messages

Maybe you are looking for