4SNS/1/40000001: VPOR-0.592 Which could mean the error?
4SNS/1/40000001: VPOR-0.592 Which could mean the error?
Indicates a sensor on the logic board has failed. Make an appointment at an Apple store to confirm. You can also try an SMC reset, then run the Apple Hardware test again:
http://support.apple.com/kb/HT3964
Similar Messages
-
4SNS/1/40000001: VPOR-0.970 Which could mean the error?
4SNS/1/40000001: VPOR-0.970 Which could mean the error?
Welcome to Apple Support Communities
Did you run this test with the MacBook Pro plugged to the charger? If not, do that. It looks like the MacBook Pro wasn't plugged to the charger -
Just done a hardware test from my USB stick and this number cam up as a hardware fault found ...4SNS/1/40000001:VPOR-6.054
MacBook Air late 2010 model A1369 serial number ---------DR1
Any help in deciphering this would be great
Kind regards and thanks in advance
SteveConnect its power adapter and run AHT again: Mac notebooks: Apple Hardware Test may report SNS alert when power adapter is not connected
-
i run hard hardware test on my macbook white an found error like this 4SNS/1/40000001:VPOR-0.578 and i replace my new battery but it not charging,help me!!
Bring it in for service. Anytime hardware test detects an error, that's an indication the service department needs to fix it.
-
ran hardware test and found error code 4SNS/1/40000001:YPOR-0.592 ? can't find the signification of this error code.
Back atcha!
-
4SNS/1/40000001: VPOR-0.878
Please, I am new to this site. How can I solve this error message after running the Hardware test: " 4SNS/1/40000001: VPOR-0.878"?
That error indicates that there is a faulty sensor in your MBP. You will have to take your MBP to an Apple store genius bar for a repair.
Ciao. -
hi,
I want a function module which could calculate the previous month's start date and end date...
Say todays date is like 29.05.2007(start date) it should return
01.04.2007 and 30.04.2007...
IS there any FM for this ... or how to go about this scenario ???
thanks in advance
sammSee the below Logic :
DATA :g_date(2) TYPE n, " Date
g_month(2) TYPE n, " Month
g_year(4) TYPE n , " Year
g_bill_low(10) TYPE n, " From date
g_bill_high(10) TYPE n, " To date
g_month1(2) TYPE n, " Month
g_year1(4) TYPE n, " Year
g_date1(2) TYPE n, " Date
g_year2(4) TYPE n, " Year
g_datum LIKE sy-datum. " System date
RANGES : r_bdate FOR vbrk-fkdat. " Billing date
g_datum = p_date + 10.
g_month = g_datum+4(2).
g_year = g_datum+0(4).
IF g_month = 1.
g_year = g_year - 1.
g_month = 12.
g_date = 1.
ELSE.
g_month = g_month - 1.
g_date = 1.
ENDIF.
Passing the date to billing date-low
CONCATENATE g_year g_month g_date INTO g_bill_low.
r_bdate-low = g_bill_low.
r_bdate-sign = 'I'.
r_bdate-option = 'BT'.
g_month1 = g_datum+4(2).
g_year1 = g_datum+0(4).
IF g_month1 = 1.
g_year1 = g_year1 - 1.
g_month1 = 12.
ELSE.
g_month1 = g_month1 - 1.
ENDIF.
CASE g_month1.
WHEN 1.g_date1 = '31'.
WHEN 3.g_date1 = '31'.
WHEN 4.g_date1 = '30'.
WHEN 5.g_date1 = '31'.
WHEN 6.g_date1 = '30'.
WHEN 7.g_date1 = '31'.
WHEN 8.g_date1 = '31'.
WHEN 9.g_date1 = '30'.
WHEN 10.g_date1 = '31'.
WHEN 11.g_date1 = '30'.
WHEN 12.g_date1 = '31'.
ENDCASE.
g_year2 = g_year1.
IF g_month1 = 2.
g_year2 = g_year2 MOD 4 .
IF g_year2 = 0.
g_date1 = 29.
ELSE.
g_date1 = 28.
ENDIF.
ENDIF.
Passing the date to billing date-high
CONCATENATE g_year1 g_month1 g_date1 INTO g_bill_high.
r_bdate-high = g_bill_high.
APPEND r_bdate.
Reward Points if it is helpful
Thanks
Seshu -
Is there any BCT Datasource which could extract The PO History data?
Hi all,
Is there a BCT datasource which could extract the PO history data ?
Thanks in advanced.
Shon.Hi,
definitely..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/eee637f5a44276b718751a19dcc3bd/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/6d5fa811684ad6af14915b81d32b4e/frameset.htm
regards
Happy Tony -
Datasource which could extract the PO history data
Hi all,
Is there a BCT datasource which could extract the PO history data i.e from EKBE table ?
Thanks in advanced.
SAMDepending on which infi you need, there are 3 datasource:
Header - 2LIS_02_HDR
Item - 2LIS_02_ITM
and
Scheduling - 2LIS_02_SCL
The info about the history (good receipt and invoice related) are on the scheduling, but to define correctly the PO in your query you should need also the others two datasource.
You'll find more info at
http://help.sap.com/saphelp_nw04/helpdata/en/e9/62073c44564d59e10000000a114084/frameset.htm
under Datasource.
regards,
Sergio -
Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
<Email Edited By Host>Hi vivekanandanganesan,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to connect to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari -
Need to know data type which could take the result of - data TYPE RAW.
Hello,
I have the following Req:
I need to make a RFC call from one SAP system to SAP Banking Services system to retrieve Contract ID.
But the field contract id happens to be of TYPE RAW. (16 characters)
So my problem is - I need to know the data type could take the result (contract id) of that RFC call.
As the declration -> data: v_con_id Type RAW --> isn't a valid syntax.
Please help in this regard.
Thanks
AnoopHi
Check this link for RAW data type
http://help.sap.com/saphelp_46c/helpdata/en/9d/ab1b0f055b11d2806500c04fadbaa1/content.htm
As you have mentioned about the declration ->
data: v_con_id Type RAW --> isn't a valid syntax.
lets try another one assign a variable to RAW data TYPE and inturn assign v_con_id to that variable.
var_raw(16) type RAW,
v_con_id type var_raw(16).
I am though not sure just try out
Revert for clarification
Thanks and Regards
Srikanth.P -
WHERE COULD BE THE ERROR ?
Hello,
I made a project using VisualAge for Java 3.5 and the I export to a directory.
The problem is that if I run the application outside VisualAge, on another pc where I install JVM, Centura Database and JDBC I receive an error message that tell me "can't create a database connection Reason: com.centurasoft.java.SqlbaseDriver".
Please tell me where could be the problem or where can I read how to use export to a .jar file option from VisualAge for Java.
thankstry to find the exact jar file that VisualAge is using when trying to connect to the Database. It can be a specific driver in a jar file that you don't have on another pc.
I had the same problem when trying to see a servlet under Netbeans.. well, it was using servlet.jar and I needed the jsdk.jar from JBuilder. -
How can I know which line contains the error in JSP
Hello, I got following compiling error:
ava.lang.NullPointerException
at org.apache.jsp.temp1Public_jsp._jspService(temp1Public_jsp.java:252)"
Is there a way I can know in which line of the jsp page the null pointer exception occurs.
"line 252 " doesn't seem to help a lot, since it refers to the rendered java file.
Thanks so much.
Oriental Spirit.Hello, I got following compiling error:
ava.lang.NullPointerException
at
org.apache.jsp.temp1Public_jsp._jspService(temp1Public
jsp.java:252)"
Is there a way I can know in which line of the jsp
page the null pointer exception occurs.
"line 252 " doesn't seem to help a lot, since it
refers to the rendered java file.As far as I know, no. If you are using an IDE that supports JSP compilation, then it may let you click on the error and take you directly to the JSP (e.g. Forte/Netbeans or Jbuilder will do this). -
Hi,
I need a quick advice about how to display in the error cluster the information about the path and VI which has thrown an error.
When I don't prepare my own error message, and the error is captured automatically, the information about the path, Vi name and calling VIs is presented automatically.
When I prepare/define my own basic error cluster I have only what I define in the string part of the cluster.
How to cause tha apperance the path and VI name in my defined error message?MimiKLM wrote:
You mean this link
That's helpful too but, I had read "When I prepare/define my own basic error cluster I have only what I define in the string part of the cluster" as you wanted to use a file to expose those custom error codes and ultimately ship them with your solution dynamically rather than statically
The error ring will pick up any custom errors you define in the error file(s). Including formatting! this then populates the explain errors and error dialogs just like any error definition that ships with any LabVIEW component or toolkit.
Certainly, an error ring can also STATICALLY define or re-define an error within the application instance the ring is called from. Those Error Rings are quite flexible!
Jeff -
Error 4SNS/1/40000001: VPoR-0.021
can i get info the issue on my MacBook Pro MBP81.0047.B27
That is a Voltage/Power buss sensor error. Bring the MBP in for service.
Ciao.
Maybe you are looking for
-
Error while migrating charecter set using CSALTER from WE8MSWIN1252 to UTF8
Hi. I tried to migrate with my database. I did backup, started in restricted mode the database. when I run csalter.plb script I got: SQL> @@csalter.plb 0 rows created. Function created. Function created. Procedure created. This script will update the
-
Hi Experts, I am creating a Purchase order (ME21) for a one time vendor (Dummy PO)created and make a printout on Script that shows my material master that data not provided by me and the data provided by me is not come on printout at the same time I
-
How can I change start up disks?
The hard drive on my laptop is partitioned with 2 different operating Systems. There seems to be difficulty with the preferences of one of the systems and I anm unable to boot from the other partition. I believe there is a shortcut at start up but I
-
How to view hidden files OS X Lion 10.7.3
Cannot find some files (my templates folder in Microsoft Word, I know the location of the folder but it will not show in Finder), tried holding down option key when selecting folders to show hidden folders but it did not work. Does anyone have any su
-
Can you use Windows 7 to partition a Boot Camp created dedicated PC drive (not just a PC partition on a Mac drive) into multiple PC partitions?