4th gen IPOD 40G spinning and make noise

My ipod shows the apple logo but starts to internally spin and make noise. When I connect to Itunes---it tells me I have a corrupt IPOD. I have tried resetting but to no availabe. AppleCare ran out 2 months ago. Any suggestions.
I guess it will run until the battery is discharged.

I have a 40g 4th gen and a 20g 4th gen. Both having same problem. Had the 40g sent out for repairs. Got it back, worked fine for one week and started making the "hung-up" noises. Repairman told me to give it a couple good "whacks" on it's backside and that seemed to do the trick. Now, if I could just get it to restore I'll be back in business.
Hp   Windows XP   High Speed Moden

Similar Messages

  • 4th gen iPod turned off and won't turn back on.

    So, earlier today I had my iPod touch (4th gen) plugged into my electronic drum kit through a double sided auxillary cable. Nothing out of the usual. I turned it to a certain song I felt like jamming to at the time and it froze. It was a weird type of freeze. The screen itself was frozen, as was the sound, but it had displayed weird grey/purple static waves, like an old T.V. with the antennas slightly off. I tried turning the iPod off normally, when that didnt work I held the power and home button to reset it thinking it was some glitch that would go away. Only, it didn't reset and just stayed off. I've tried plugging it into my PC, no response. I've even tried plugging it into my xbox (which is one way I usually charge it) and it didn't respond either. As of now, it's a brick. I have no idea why. Nothing was out of the ordinary other then a random screen freeze/glitch.
    TL;DR I have an iPod that's turned off, it will not reset, go into DFU mode, and does not charge/is not recognized when plugged into anything. Anyone got any idea what I should do?

    It would appear that you have a hardware problem and an appointment at the Genius bar of an Apple store is in order.

  • HT203128 my ipod wont start and make noise inside why?

    my ipod classic shows -is ok to disconect only- why?

    Hello 11zachs,
    I'm sorry to hear you are having these issues with your iPod classic. If your iPod isn't responding or starting up successfully, you may find the information and troubleshooting steps outlined in the following articles helpful:
    iPod: No power or frozen - Apple Support
    Restoring iPod to factory settings - Apple Support
    Sincerely,
    - Brenden

  • Can I use my 4th gen iPod on Mac AND Windows computer?

    My main household computer is a Mac. It also contains our main iTunes Library, and everything else. However, when I went to hook up my iPod to my HP mini (net book), my iTunes and my laptop both said that I had to format my iPod before I could use it on that computer. Why is this? I did not have to do so with my iTouch. Is there a way around this? I really would like to transfer my purchased songs onto the net book, but I cannot access the iPod at all with out formatting it.

    Install the MacDrive trial, or if you just want to transfer the songs, use a network connection or a drive other than the iPod to do it.
    (46435)

  • TS1382 4th gen iPod nano wheel and buttons still non-responsive after all t-shooting suggestions performed.

    Hello all,
    My beautiful 1 year old daughter pull my nano off a Bose speaker dock and ever since the wheel and buttons have been non-responsive.  I've tried a rest and all troubleshooting steps with no luck.  Does anyone out there have any other suggestions?  Thanks.
    Mike

    Mine is no longer responding to anything but when it's connected to the computer, it will restore and sync, but I cannot turn it off, play music or anything else and I would really like to know a solution for this as well!

  • 4th gen ipod usb troubles

    ok, so i bought a 20GB 4th gen. iPod off ebay and i can't get it to work with my computer. I have a Gateway laptop with roothub usb. My computer will detect the iPod, but not my iTunes. And it has trouble charging. I think it is a compatability with my computer so now what can i do? I don't really want to have to upgrade my computer just for my iPod, but as far as I know the iPod is the only device that will play the AAC iTunes files.

    Apple created the stupid AAC file format to annoy Windows users.
    Change your settings in Edit > Preferences > Advanced > Importing ~ to "Import Using 'MP3 Encoder'" - not AAC. If you wanna send music to a friend over AIM/MSN/Yahoo or whatever and they dont have iTunes, it's annoying, MP3 is more globally accepted.
    So your iPod works with your computer, but not with the iTunes.
    Things to try:
    1) Re-install iTunes
    2) Reset iPod
    Good luck and reply back soon!

  • When I put my 4th gen iPod Touch in my iPod dock it makes the sound and charges but when I play music it is silent. Help?

    The volume slider at the bottom disappears, so it is connected and my iPod dock will play music on my old 4th Gen iPod Touch. My new iPod will play fine through headphones, the internal speaker and one other iPod dock I have tried. I have restarted it (home and lock keys), reset and backed it up and this problem existed when it was on iOS6 (have updated it to iOS6.1 - problem still exists). Any help or suggestions welcome!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    However, sometimes an iOS update will break conpatibility and you will have to wair for an update to either the iOS or the dock firmware.

  • Help needed with 4th gen. iPod shuffle and "reshuffling" music

    I have a silver 4th gen. iPod shuffle that works well for me.     I had 196 songs on it and in the last couple of days, I added 14 more.  Now, I have 210 songs on it.  Cool.  The issue I have is NONE of the new songs play. I do get a good mixture of music and it's pretty random but in the 7 or so hours I listened to my iPod today at work, NONE of the new songs I added played at all.  I would guess at least one of the new songs would have played but none did.
    I found the iPod manual online in PDF format and read the instructions for "reshuffling" the iPod, but I'm not sure that worked.   So, here are my questions:
    When I add new music, must I manually "reshuffle" the songs manually or should that happen automatically?
    When I "reshuffle" the songs, I follow these steps:  "To reshuffle songs, slide the three-way switch from shuffle (icon) to play in order (icon) and back to
    shuffle again.  Must the iPod be playing music when I do this or does that matter?
    I manually add the music to the iPod and don't automatically sync anything, nor do I have any playlists.
    Thanks in advance!
    Peace...

    You may want to play the shuffle with the switch in the middle play-in-order position.  Then, when you play songs from the All Songs list, they play in alphabetical order.  That should make it easier to confirm that songs on the new batch does actually play (because the order is not random). 
    Also, there are only about 200 songs on there, so keep hitting Next until hear one of the new songs.  If you get back to the first song without hearing one of the new songs, something is wrong.
    It should not matter when you do the reshuffle step, whether the iPod is playing or not.
    Have you checked using iTunes, to confirm the new batch of songs is on the shuffle?  If the iTunes sidebar is hidden, from the menu bar, under View, select Show Sidebar.  The shuffle appears in the sidebar, under DEVICES.  Click the small triangle to the left of the shuffle's name, to drop down its content list (indented below the shuffle) Click on Music there.  The list of songs on the shuffle is shown to the right.  Are those 14 new songs on the list?

  • I have a 1st & 4th gen ipod shuffle.  When I copy a playlist to the 1st gen it plays back correctly.  The 4th gen plays back the same playlist alphabetically by artist.  The copy by play order function makes no difference.  Any suggestions?

    I have a 1st & 4th gen Ipod shuffle.  When I copy a playlist to the older shuffle it plays back in order.  When I copy a playlist to the 4th gen shuffle it plays by alphabetically by artist.  I used the copy by play order but with no change.  Any suggestions?

    This is crazy. What are those guys thinking. I would love to have my 2nd generation ipod shuffle back - it was so easy to use, so easy to operate, alas it was lost/stolen! There are 2 big disasterous (disaster to ease of use) changes in the ipod 4th generation. This particularly relates to podcasts. One is they only play in order by source/type of podcast. You cannot break out of that unless, you have someone to show you how to use the voice over which is not covered anywhere on the very thin manual or elsewhere. Secondly and just as bad but related also, you cannot line them up on your shuffle by date, preference, anything. ONLY apple will do this for you. I hate the thing and will return it today after visiting Apple 3 days in a row to try and get answers, trying to apply the answers and realizing beside the fact that some of the answers given were wrong, they were not going to lead to ease of use. Who said this was better? I was struggling with this (not knowing how to break out of one type of podcast) until i went to Apple and talked to about 4 people who knew less than i did about the shuffle. OUr family has just bought 2 new macbook pros for my son and wife. I have had my macbook for 4 years and love it. I had my ipod shuffle (2 gen) for the same time and loved it but now I don't trust Apple. Are they going to make changes just to make changes. Get some consumer advice, please not just from nerds who want more buttons but from everyday people.
                                  A Bunch of wasted time, yfbolsen

  • My iPod doesn't stay connected, it keeps ejecting and saying disconnected (4th gen iPod nano)

    my iPod doesn't stay connected, it keeps ejecting and saying disconnected (4th gen iPod nano) and im trying to connect it to my new laptop to add music to it.

    I had the same thing happen where the ipod would cycle between connected and ejecting and disconnecting, with the USB device icon appearing then disappearing is the application tray. I tried reinstalling iTunes, resetting the ipod, resetting the computer and tried it on another USB port then another computer and had the same thing happen. I was ready to take the ipod back to the store and thought I'd try it on my work laptop and it worked OK. The two previous computers were the same make and have 8 USB ports each, two on the front and 6 at the rear. I only tried the two front ports. After it worked on the work laptop I tried one of the rear USB ports on the original PC, which is a bit of a pain, but it worked. I ejected it and plugged it into one of the front USB ports again and I got the same cycling effect. Plugging back into the rear port and it was fine. I can only assume that some USB ports may be borderline with power requirements which the iPod is touchy on. I suggest if you experience this problem try the iPod on ALL your USB ports even if you have to move an existing USB device to another port.
    I did read somewhere in the support area that an external USB hub that has its own power supply could help if the unit has issues recharging through a direct USB port so since this issue appears to be port related an external USB hub may be another solution. I personally haven't tried this but if all the direct ports on the PC exhibit this issue this may be a valid alternative outside of returning the unit. Hopefully someone may find this helpful.

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • Hi , i have a 4th gen ipod touch and it runs on 4.3.5 but it wont let me update it to 5.1.1! everytime i try to install it..it says "sorry your network timed out" and wont let me! i tried so many times and it still wont work.. what to do?

    hi , i have a 4th gen ipod touch and it runs on 4.3.5 but it wont let me update it to 5.1.1! everytime i try to install it..it says "sorry your network timed out" and wont let me! i tried so many times and it still wont work.. what to do?

    Disabling the computer's security software (firewall and antivirus) usually resolves that error.

  • My 4th gen Ipod touch won't power up but is recognized by itunes and is in recovery mode! What can I do/

    I can't get my 4th gen ipod touch to turn on but itunes see's it and is in recovery mode. I can hear the beep beep when I plug it in to the usb port. I have also charged it for 3 hrs so far but won't fire up. I tried the customery hold the home and power button routine but don't know what else to do. I tried recovery mode but the itunes say's"waiting for the ipod" and I guess cause it's not on it won't recover. Any help would be appreciated! Thanks in advance to all who reply!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own.  Thanks,

    I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own and there is no option to install manually..  Thanks.

    Are you sure it is a 4G iPod?  Does it have a camera?

  • HT1459 my 4th gen ipod touch is stuck on itunes connect screen and don't have access to original computer

    4th gen ipod touch stuck on itunes plug in screen and don't have computer i setup with

    Hey 34grumpy4u,
    Thanks for the question. I understand that your iPod touch is currently in recovery mode, and needs to be restored. You can restore your iPod with any computer, then transfer your information back to your iPod once you have access to your backup (whether it was made via iCloud or iTunes).
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

Maybe you are looking for

  • How to install My forms and reports in IAS?

    Hi Gurus, I installed database 10g,IAS10g,forms and reports10g separately. now i want to configure my forms and reports in IAS 10g.i can run the form from formbuilder after started the oc4j.but i am not able to run in ias . anybody know the link" how

  • Dreamweaver code view problem with Turkish fonts

    All my preferences is set to Turkish encoding, but only at the code window Turkish characters aren't displayed right. If i type directly into the code window, everything is ok. but if i write something to design windowi the characters change automati

  • Srvctl and Oracle 11g

    Hi, I see that Oracle 11g srvctl utility no longer takes the '-c' option to specify the connect string as it used to work in 10g and 9i. What is the replacement for this then? How can I login as a non Oracle OS user and use the srvctl command? How do

  • [svn] 1605: Bug: BLZ-155 - Deadlock using a thread pool for tomcat connectors

    Revision: 1605 Author: [email protected] Date: 2008-05-07 14:24:53 -0700 (Wed, 07 May 2008) Log Message: Bug: BLZ-155 - Deadlock using a thread pool for tomcat connectors QA: Yes - Jorge verified in the QE lab Doc: No Ticket Links: http://bugs.adobe.

  • How many tables?

    Hello I would like to have some stats w.r.t. the number of tables and classes used in projects. Could you give me theses numbers, and eventually the scope of the projet? (ERP, bank, ...), approximatively the number of functionnality, ...? many thanks