4th gen. Ipod Shuffle takes a long time to start playing
When I turn on my Ipod Shuffle Gen 4, nothing happens! Then, after a few minutes it starts to play. I tried resetting and restoring and updating the software but nothing fixes it. Sometimes it doesn't ever start playing - other times it is pretty quick. Mostly, though, it takes about five minutes or so before it starts playing. Any ideas?
If you've done a Restore already, and it's not a problem related to the headphones, the cause is likely to be a problem with the shuffle. If it's new (or within one year from purchase date), I would have it checked under warranty. If there is an Apple Store nearby, you can do so with an Apple tech support person at the Genius Bar. The store's web page lets you make a reservation.
http://www.apple.com/retail/
Similar Messages
-
Movies taking long time to start playing!
I like watching movies in Front Row but I have a problem, Whenever I try watching a full length movie it takes really long time to start playing.
The screen is black for like 2-3min and nothing responds (Pressing ESC, or pressing menu etc...) after that it starts playing normal.
Smaller movies (30 min episodes) load up normally.you need more ram it will go faster. You should have at least 2 GB to go faster.
-
my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me
After being connected to a charging source overnight try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a 1st & 4th gen Ipod shuffle. When I copy a playlist to the older shuffle it plays back in order. When I copy a playlist to the 4th gen shuffle it plays by alphabetically by artist. I used the copy by play order but with no change. Any suggestions?
This is crazy. What are those guys thinking. I would love to have my 2nd generation ipod shuffle back - it was so easy to use, so easy to operate, alas it was lost/stolen! There are 2 big disasterous (disaster to ease of use) changes in the ipod 4th generation. This particularly relates to podcasts. One is they only play in order by source/type of podcast. You cannot break out of that unless, you have someone to show you how to use the voice over which is not covered anywhere on the very thin manual or elsewhere. Secondly and just as bad but related also, you cannot line them up on your shuffle by date, preference, anything. ONLY apple will do this for you. I hate the thing and will return it today after visiting Apple 3 days in a row to try and get answers, trying to apply the answers and realizing beside the fact that some of the answers given were wrong, they were not going to lead to ease of use. Who said this was better? I was struggling with this (not knowing how to break out of one type of podcast) until i went to Apple and talked to about 4 people who knew less than i did about the shuffle. OUr family has just bought 2 new macbook pros for my son and wife. I have had my macbook for 4 years and love it. I had my ipod shuffle (2 gen) for the same time and loved it but now I don't trust Apple. Are they going to make changes just to make changes. Get some consumer advice, please not just from nerds who want more buttons but from everyday people.
A Bunch of wasted time, yfbolsen -
TS3572 My 4th gen ipod shuffle will not show up in iTunes
My 4th gen ipod shuffle will not show up in iTunes, and is not recognized by my computer. I am using a MacBook Pro purchased six months ago, with all software up to date. I am using the most recent version of iTunes,and the original factory connector. It does charge through the computer, but is not seen by the computer. I have gone through all of the recommened troubleshooting, and have verified that the connectors are plugged in properly.
Thanks for a reply
The cable that I'm using came with my 5th gen nano. The 6th gen Ipod shows that it's connected but the computer doesn't see it, so I don't think that it's the cable.
I did try this before when looking at the troubleshooting guide and nothing happens. It just resets and then the Ipod screen tells me that it's connected to the computer. It still is unseen by Itunes and no where to be found in my computer.
I don't have another computer to plug it into at the moment but I may be able to visit a friend that owns a decent PC in a few days. If that doesn't work out I will be getting a new lap top in a week and I'm hoping that it will work on that, but it won't be a Mac. So, let's say it works when I plug it into one of these computers, should I reset my Ipod from there or is there something else I should do? -
Help needed with 4th gen. iPod shuffle and "reshuffling" music
I have a silver 4th gen. iPod shuffle that works well for me. I had 196 songs on it and in the last couple of days, I added 14 more. Now, I have 210 songs on it. Cool. The issue I have is NONE of the new songs play. I do get a good mixture of music and it's pretty random but in the 7 or so hours I listened to my iPod today at work, NONE of the new songs I added played at all. I would guess at least one of the new songs would have played but none did.
I found the iPod manual online in PDF format and read the instructions for "reshuffling" the iPod, but I'm not sure that worked. So, here are my questions:
When I add new music, must I manually "reshuffle" the songs manually or should that happen automatically?
When I "reshuffle" the songs, I follow these steps: "To reshuffle songs, slide the three-way switch from shuffle (icon) to play in order (icon) and back to
shuffle again. Must the iPod be playing music when I do this or does that matter?
I manually add the music to the iPod and don't automatically sync anything, nor do I have any playlists.
Thanks in advance!
Peace...You may want to play the shuffle with the switch in the middle play-in-order position. Then, when you play songs from the All Songs list, they play in alphabetical order. That should make it easier to confirm that songs on the new batch does actually play (because the order is not random).
Also, there are only about 200 songs on there, so keep hitting Next until hear one of the new songs. If you get back to the first song without hearing one of the new songs, something is wrong.
It should not matter when you do the reshuffle step, whether the iPod is playing or not.
Have you checked using iTunes, to confirm the new batch of songs is on the shuffle? If the iTunes sidebar is hidden, from the menu bar, under View, select Show Sidebar. The shuffle appears in the sidebar, under DEVICES. Click the small triangle to the left of the shuffle's name, to drop down its content list (indented below the shuffle) Click on Music there. The list of songs on the shuffle is shown to the right. Are those 14 new songs on the list? -
TS3572 My 4th gen ipod shuffle is either not working or dead...
My 4th gen ipod shuffle is either not working or dead, i have opened it and found that its black near audio pin is injected and its heating while connecting via usb to laptop neeeeeeeeeeeeeeed help any one...............................
i think its kind of short circuited is any thing workable in this device or not........I solved my problem by restoring the shuffle to factory settings on the summary screen. Now it seems to work the way it's supposed to. Many thanks to Apple for zero help, as usual. Apple should direct less resources to developing the next snazzy ipad and more to cleaning up and enhancing itunes. I'll make the same editorial comment about the iphone 4 voicemail options.
-
Recently when I turn on my mac it takes a long time to start up and at first and in the beginning it appears with a grey screen and at the end it turns blue.
Also it freezes in some of the Apps, so it make me to turn of.
Please be kind enough to guide me to solve these problems.
I thank you in advance for your cooperation and quick response.
Best Regards
Ahmad EmamiWhat SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael -
Lenovo Services/Program takes a long time to start after bootup
It seems like Lenovo services take a long time to start after boot up is completely done.
My Bootup time is less than a minute (0:51s), but my lenovo services (Power Manager Gauage, Lenovo Services in the Sidebar, have th ThinkVanatage Button work, and most annoying of all is having access to my network card to change networks) takes about 2 minutes.
Is there a reason why this is taking so long?
I've uninstalled and installed the lastest Lenovo Interface Driver, and a lot of ThinkVantage/Lenovo software and drivers.
Any ideas?No response?
Anyone else on T400 notice this? -
My macbook pro takes a long time to start up, my macbook pro takes a long time to start up
my macbook pro takes a long time to start up, my macbook pro takes a long time to start up
up to 10 mins
-
NW2004s takes a long time to start up
I am trying to find out why out NW2004s takes a long time to start up.
We have installed NW2004s SP8 JAVA only to use it as Enterprise Portal with Oracle 10g on SUN SPARC 64. While the shutdown of J2EE is pretty fast, the startup take over an hour and half.
/usr/sap/<SID>/JC##/work/dev_server0 file shows:
Thu Aug 10 15:31:48 2006
4017.515: [GC 4017.515: [ParNew: 104368K->17613K(131328K), 0.0423530
secs] 797893K->711138K(1004800K), 0.0428819 secs]
Thu Aug 10 15:31:50 2006
4019.309: [GC 4019.310: [ParNew: 105165K->17610K(131328K), 0.0762693
secs] 798690K->711134K(1004800K), 0.0767036 secs]
Thu Aug 10 15:34:35 2006
4184.118: [GC 4184.119: [ParNew: 105162K->22685K(131328K), 0.0762199
secs] 798686K->716210K(1004800K), 0.0766811 secs]
and /usr/sap/<SID>/JC##/work/std_server0.out file show entries like:
2051.407: [GC 2051.408: [ParNew: 112475K->25810K(131328K), 0.1614717
secs] 678386K->591721K(1004800K), 0.1619460 secs]
2060.554: [GC 2060.555: [ParNew: 113362K->26687K(131328K), 0.1458862
secs] 679273K->592599K(1004800K), 0.1463431 secs]
2068.742: [GC 2068.742: [ParNew: 114239K->27592K(131328K), 0.1464110
secs] 680151K->593504K(1004800K), 0.1470097 secs]
2077.575: [GC 2077.576: [ParNew: 115144K->28470K(131328K), 0.1545706
secs] 681056K->594382K(1004800K), 0.1550365 secs]
2086.411: [GC 2086.411: [ParNew: 116022K->29505K(131328K), 0.1559618
secs] 681934K->595417K(1004800K), 0.1564804 secs]
2094.803: [GC 2094.803: [ParNew: 117057K->30419K(131328K), 0.1531343
secs] 682969K->596331K(1004800K), 0.1536090 secs]
2103.255: [GC 2103.255: [ParNew: 117971K->31345K(131328K), 0.1602581
secs] 683883K->597257K(1004800K), 0.1620506 secs]
2112.423: [GC 2112.424: [ParNew: 118897K->32236K(131328K), 0.1715456
secs] 684809K->598147K(1004800K), 0.1721748 secs]
2123.276: [GC 2123.276: [ParNew: 119788K->33014K(131328K), 0.1640996
secs] 685699K->598926K(1004800K), 0.1645846 secs]
2132.172: [GC 2132.172: [ParNew: 120566K->33980K(131328K), 0.1673372
secs] 686478K->599891K(1004800K), 0.1678214 secs]
2141.072: [GC 2141.072: [ParNew: 121532K->34784K(131328K), 0.1810283
secs] 687443K->600695K(1004800K), 0.1814991 secs]
2149.693: [GC 2149.694: [ParNew: 122336K->35368K(131328K), 0.1670516
secs] 688247K->601280K(1004800K), 0.1675269 secs]
2158.486: [GC 2158.486: [ParNew: 122920K->36435K(131328K), 0.1756513
secs] 688832K->602347K(1004800K), 0.1761320 secs]
2167.314: [GC 2167.315: [ParNew: 123987K->37497K(131328K), 0.1852015
secs] 689899K->603409K(1004800K), 0.1857250 secs]
2176.397: [GC 2176.398: [ParNew: 125049K->38251K(131328K), 0.1741406
secs] 690961K->604163K(1004800K), 0.1746117 secs]
2185.352: [GC 2185.352: [ParNew: 125803K->39375K(131328K), 0.1920462
secs] 691715K->605287K(1004800K), 0.1925810 secs]
2194.150: [GC 2194.151: [ParNew: 126927K->40253K(131328K), 0.1923566
secs] 692839K->606165K(1004800K), 0.1928781 secs]
2202.884: [GC 2202.884: [ParNew: 127805K->38024K(131328K), 0.2031970
secs] 693717K->607088K(1004800K), 0.2036677 secs]
2211.384: [GC 2211.385: [ParNew: 125576K->38851K(131328K), 0.1844842
secs] 694640K->607915K(1004800K), 0.1849062 secs]
2219.963: [GC 2219.964: [ParNew: 126403K->39869K(131328K), 0.1842210
secs] 695467K->608932K(1004800K), 0.1846878 secs]
2228.866: [GC 2228.867: [ParNew: 127421K->39719K(131328K), 0.1920358
secs] 696484K->609702K(1004800K), 0.1925630 secs]
2238.453: [GC 2238.453: [ParNew: 127271K->40643K(131328K), 0.1889567
secs] 697254K->610627K(1004800K), 0.1894261 secs]
2247.056: [GC 2247.056: [ParNew: 128195K->40718K(131328K), 0.1947238
secs] 698179K->611585K(1004800K), 0.1951833 secs]
2255.409: [GC 2255.410: [ParNew: 128270K->40804K(131328K), 0.1939193
secs] 699137K->612886K(1004800K), 0.1943765 secs]
2264.305: [GC 2264.306: [ParNew: 128356K->39943K(131328K), 0.1884611
secs] 700438K->613753K(1004800K), 0.1889279 secs]
2273.187: [GC 2273.188: [ParNew: 127495K->39907K(131328K), 0.1996605
secs] 701305K->614598K(1004800K), 0.2001354 secs]
2281.869: [GC 2281.870: [ParNew: 127459K->39951K(131328K), 0.1870669
secs] 702150K->615514K(1004800K), 0.1875029 secs]
2290.306: [GC 2290.307: [ParNew: 127503K->39975K(131328K), 0.1803927
secs] 703066K->616409K(1004800K), 0.1809368 secs]
2300.101: [GC 2300.101: [ParNew: 127527K->39897K(131328K), 0.1830319
secs] 703961K->617187K(1004800K), 0.1835056 secs]
2310.130: [GC 2310.130: [ParNew: 127449K->39869K(131328K), 0.1858475
secs] 704739K->618039K(1004800K), 0.1862819 secs]
Does anyone know what these entries are and some possible options to speed up the startup process? Thanks. I have already gone through the notes for Virtual memory and heap settings for SUN systems. Has anyone had any similar experience?
Thanks!What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael -
My Zen Micro 6 GB takes a long time to start up (aprox. -2 minutes). This is not the end of the world but it is annoying. He started doing this 2 days ago, have it for half a year.
I did the cleanup, but before I format the thing I want to be sure that's the only way.
Thanks in advance.What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael -
Aperture 3.1 takes incredibly long time to start
Since after the upgrade from 3.0.x to 3.1 Aperture takes a long time to start up. I click on the Aperture icon in the dock, the icon bounces for almost a minute, then it stays still for more than a minute, doing nothing and without the "light bulb" indicator that the app is running. It's just sitting there in the dock. After a total of 2-5 minutes, the Aperture window opens and I can start working.
I tried many things suggested in the forums to speed up Aperture:
I turned off Faces
I turned off sharing of previews with iLife and iWork
I turned off using embedded JPEGs from camera
I deleted all Aperture preferences as I thought there might be a corruption after upgrade
I removed all plugins from Aperture plugin folder to make sure nothing is interfering
I used the Aperture rebuild and repair options on the library
I created a new Aperture library and imported my photos from the old library into a fresh one
I downloaded and installed the Aperture 3.1 update again to make sure nothing got corrupted during update installation
Nothing helped. Aperture takes 2-3 minutes to fully start.
Plugins in use: NIK Software's Viveza 2 and HDR Efex Pro, Tiltshift for Aperture. That's it. And, as I said, it doesn't help if I take them out of Aperture's plugin folder so they don't get loaded. Problem still remains.
My library isn't that big: 29GB in 8230 items. Is 2-3 minutes a normal startup time?
Has anyone experienced a similar problem after upgrading? As I literally exchanged everything underneath Aperture (deleted preference files, created new library and imported photos from old lib) I don't know what else I could try. Totally uninstall Aperture and re-install it again?
Any suggestions what this could be?
On a sidenote, interestingly Logic Pro takes about the same amount of time to start. The icon bounces in the dock for almost 1 minute, then I hear the harddisk working for another minute until the splash screen finally appears. Logic Pro is loaded after 2 minutes and 20 seconds. I could boot my whole Mac 4x in that timeframe.To everybody having this problem. I found out what the culprit was. As a documentation here is what it was.
I read some posts here on the forums that mounted USB sticks or flash cards would make Aperture super slow while importing photos. I have Boot Camp installed and have a Windows 7 partition on the same drive as my MacOS. So, out of curiosity, I forced it to unmount as the partition automatically gets mounted by the OS.
Voilà! That seems to have been the culprit! Now both Aperture and Logic (which also had to think 2 minutes before it decided to start) display the splash screen in seconds and start like they are supposed to.
Make sure you have no drives mounted when starting these applications. This helped bringing down the starting time from 2 minutes and 20 seconds to just a few seconds. Of course, if you have your library on another drive you have to have it mounted. Maybe it only takes so long when you have Boot Camp and an NTFS partition. But if you experience lags starting these apps, try unmounting what you don't need. -
why cant this reset?
That old "Reset Utility" is ONLY for the 1st and 2nd gen iPod shuffle, which had some issues that prevented using the standard Restore in iTunes, so Apple release that utility. It was released when Windows XP was the latest version of Window; it does not work with Windows 7. But it would not help you if your shuffle is 4th gen.
When you say "reset," are you trying to do a Restore on the shuffle in iTunes, from the shuffle's Summary tab? When does that error message appear, exactly? -
Just bough 4th Generation iPod Shuffle from Amazon - comp;uter doesnt recognmise device, neither does iTunes. I have re-installed iTunes, re-started Computer but nothing seems to work. I have a 2nd generation iPod shuffle and that is recognised by computer. Anyone have any suggestions - I am at my wits end.
There is a USB printer connected to the back port of the PC. The mouse and keyboard are both PS/2.
I did attempt to reinstall the USB root drivers. After uninstalling iTunes and all the other apple software packages included, I uninstalled everything USB in Device Manager, then rebooted the PC to let Windows reinstall it all.
Reinstalling the OS -might- fix the issue, but if that were the case, it's most likely just a software conflict that can easily be fixed if I can manage to narrow the specific conflicts down. I've already essentially disabled everything with MSCONFIG except for Apple stuff, so I'm at a loss as to where to go. I've attempted the 5 Rs and all that as well, none of it seems to do the trick. I also cleared the temp folder multiple times (once per each iTunes uninstall / reinstall following the support site directions of uninstalling all the extra apple software) as well as attempted restarts of the Apple services.
One oddity I would like to point out is that if I attempt to restart the iPod service through services.msc, it will not restart. It throws the error message of "the service failed to respond in a timely fashion" or whatever. I instead have to use the windows Task Manager to manually kill the iPod process in the processes list.
I just now removed the USB printer and plugged the shuffle into the same port, but I receive the same error message in iTunes about the iPod being corrupted and it needing a restore. If I push restore, the software gets stuck in an endless loop. There are no other USB devices attached to this computer, the motherboard drivers are fully up to date from nVidia's website, and other USB devices clearly function just fine (USB memory sticks, USB printer, etc). If I use the Diagnostics option under Help in iTunes, it will claim there is no iPod connected, and, again, the iPod still does not show up in Windows Explorer under My Computer as an attached device, nor does it show up in Disk Management as a mounted partition.
Maybe you are looking for
-
How to insert rows from an xml file to a table
im Using Oracle 11g It is showing below error when i execute.. declare charString varchar2(80); finalStr varchar2(400) := null; rowsp integer; v_FileHandle UTL_FILE.FILE_TYPE; begin -- the name of the table as specified in our DTD xmlgen.setRowsetTag
-
Good day! On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "U
-
Screensaver not working since upgrading to Mavericks
As the title says my screensavers doesn't 'kick in' since upgrading to Mavericks at the weekend. I've tried reselecting my chosen photo folder but it still doesn't work. All it does is stay on the desktop screen. Has anyone else had this and know how
-
A List on the pageFlow in a portlet (8.1)
When I put a java.util.List on the pageFlow, workshop complains that it's not Serializable. The annoying this is that the log also reports this warning. Is it possible to make weblogic ignore this and only this warning? My business tier's session bea
-
How to search Deleted SC in Application Monitor
Hi All Got a question need your help. I'm not able to search the "Deleted" SC in Application Monitor. My version is 7.0 I heard this is a BUG. Is that ture?