4th gen iTouch will not fully synch with new computer

When I originally bought my iTouch, I synched it with a computer that has since died due to a hard drive crash.  I have connected it to my new laptop, but it will not allow a full/true synch because it senses that this computer is not the original one.  Is there a way to fix or remedy this?  I would like to update my iTouch to the newest iOS, but I'm afraid I will lose songs that are on my iTouch and not my iTunes on the computer.  Installing the new iOS completely wipes the device, so before I do it, I need to be able to synch completely.

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Similar Messages

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • My iPod Touch Gen 5 will no longer synch with iTunes on my computer.  Only change since this happened is update to iPod to OS 8.1.1  iPod synch remains stuck in "Step 8 of 8"

    My iPod Touch Gen 5 will no longer synch with iTunes on my computer.  Only change since this happened is update to iPod to OS 8.1.1  iPod synch remains stuck in "Step 8 of 8"

    On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
    Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
    You won't lose any content, you're not deleting that, just the programs that access them.
    What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
    My iPad and iPod did exactly the same thing and this is how I fixed it.

  • My nano 4th Gen. ipod will not sync album I just purchased from itunes.  It says it is syncing but does not. Can anyone help?

    My Nano 4th gen. ipod will not sync my new album I just purchased from itunes store.  It says it is syncing but does not transfer music.  can anyone help?  I am using windows 7.
    thanks,
    B.H.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • My garage band will not work properly with new lion upgrade..HELP

    My garage band will not work properly with new lion upgrade..HELP
    I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.

    If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
    http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
    Here is again the short version:
    Quit GarageBand, if it is running.
    Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
    Finder > GO    hold down the "Options" key, until the library appears in the menu, select it.
    In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
    Then try again to run GarageBand and download the loops.
    The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
    Regards
    Léonie

  • HT1420 My songs that I purchased on my itunes account from my dad's computer will not play on my new computer, I have access to my entire account but can only play songs purchased using my new computer. Does anyone have any ideas?

    My songs that I purchased on my itunes account from my dad's computer will not play on my new computer, I have access to my entire account but can only play songs purchased using my new computer. Does anyone have any ideas?

    Hi Kevin,
    Have you authorized the Computer to your Apple ID?
    If not, sign on to iTunes.
    Then got to the Store menu option at the top of the screen (CTL+B if it is not showing), and click on it to display the dropdown, and select Authorize this computer.
    If that doesn't work, then sign on your Dad's iTunes ID and repeat the Authorization process.
    Cheers,
    GB

  • TS2771 itouch 4th gen camera will not open?

    Can anyone point me in the right direction? Our itouch 4th gen camera shutter will not open.
    Thank You!
    Ava

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • IPod 4th gen grayscale will not detect usb connection.

    Hello everyone, I have a iPod 4th gen grayscale and I'm running Ubuntu, everything has worked well for about a year now, I have been syncing my iPod through VirtualBox with Windows XP for as long as I have been using Linux, though, for some reason, my iPod has stopped noticing my usb being connected, I know it's not the usb cable, or the usb ports, I have restarted my iPod and put it into disk mode, still no luck, restarted my computer, Linux will not detect anything plugged in, nor will Windows, though my iPod shows the battery charging when plugged in, but iTunes will not detect the iPod.
    I have switched the hard drive of the iPod out seeing if that was the problem, still no luck, my car dock will pick up the iPod and play music, so will my other docks, I thought it might of been Linux at first, so I plugged it into my desktop with Vista, it also will not detect it.
    Does anyone have an answer to this riddle?

    A bad USB hub will cause the problem ... are you using it ??

  • 4th Gen iPod will not mount or connect to Windows

    Hi, one of my iPods will not connect to Windows XP. Its a 4th Gen 40gb non photo iPod
    The iPod still plays and works "normally" as a portable device (ie I can play music), but I cannot connect it to my pc at all.
    When I plug it in via either USB or Firewire ports the iPod disc whirrs and gets stuck in a loop (that can last over 2 hours plus) before i need to reset it in order to disconnect it from the pc.
    When I connect, it doesn't launch iTunes as it should.
    It doesn't appear in My Computer.
    It doesnt appear in Computer Management>Disk Management
    Latest iPod updater cannot read it (even when put in disk mode) and tells me that it can't mount the iPod.
    Also, the iPod has since started to mess my PC up - it will not allow the PC to boot up with the iPod connected. If I connect the iPod to the PC with iTunes already launched it causes iTunes to freeze and crash. When I go to restart the PC, Windows will not shutdown.
    Getting sick now - any ideas please (besides throwing it out the window!)?
    It's weird how the iPod still plays, but it will not connect to the PC when my other 4G 30gb photo and Shuffle will.

    I have tried resetting and restoring the ipod before, and I have put it into disk mode too (in order to restore it) but the ipod updater said it could not mount it
    However, I did try Deanz advice by putting it into disk mode whilst attached to the mains and then connecting it to the PC has at least enabled me to see it in "My Computer" for the first time as (the "F" drive), even if iTunes is not recognising it.
    However, when I attempt to see the ipod in Disk Management I get the same problem outlined above in an earlier post (grey screen).
    If I try to browse the iPod via My computer that task freezes. Task Manager claims the function is "not responding"
    Grrrrrrrrrrrrrrrrrr
    Anyway, all my music is backed up so that's not a problem. The iPod works, but I can't update it so it could be worse. Not really sure how to remap the iPod to a different drive letter
    [edit] During the process of closing down the non-responsive "My Computer", Windows had a major gimp out and completely froze me out until I reset the ipod an put it back into disc mode (again). Then Windows reappeared in the same state before it crashed. I suspect this is due to some kind of conflict with the iPod as it has done this a few times now since my iPod started acting up (and only when the iPod is connected).
    Thinking of some elaborate home insurance claim now..............

  • Recently my itouch will not fully open articles from the yahoo home page.  The article starts to open but as I scroll down the page there are blacked out and whited out sections.  Te "reader" option opens the full article.

    I can look at the yahoo home page and open the links to articles, but the articles do not fully open unless the reader option is available and I use it.  So far this has happened only from yahoo or some links emailed to me.  I have done a hard reset but not a restore. 

    - Double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 3G 4G only has 256 MB of memory.
    - Next try going to Settings>Safari and Clear Cookies, Data and History
    - Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Firefox will not fully open with US Mil LPS Linux

    I was just running US Mil LPS Linux from USB stick...Firefox would not fully open. i.e., I was unable to see the top of the browser for all options. Pls advise and many tnx

    Does that version creates and uses its own profile folder or does it use the default profile folder from the installed release version?
    *http://kb.mozillazine.org/Profile_Manager
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • HT1218 router will not work anymore with new update- how do I fix this?

    I just updated to the current software and now I have no connection. I have tried to reset the airport extreme but I cannot get it to recognize my laptop, Ipad2 and iphone.  I have earthlink as my internet provider.   I have talked with them, but they could not help.  I think that some of the numerical addresses are messed up.  My computer works fine at work on a different airport extreme- so I know that it is not a problem with my laptop. 

    That is because Apps are tied to the apple id that was used to purchase or download it.  So you will have to use your old apple id and password to update the app.
    You can try deleting the app and then downloading it with your new id - not 100% sure this will work.

  • Monitor will not turn on with new graphics card

    I have a h8-1070t and added a Powercolor 7870 myst graphics card, but the monitor, keyboard, and mouse will not power on.  I tried this same card in my friends pc, works fine. I have a 600w powersupply and running windows 7 and currently  using an old  Saphire 1950 graphics card; works fine.
    Could there be a problem with my power supply?or windows 7?
    thanks for any advice

    I am having this same issue with a powercolor hd7850.  I have an HPE H8-1214.  Any ideas on this will definitely help.  card works great in my other comp but I am wanting to use it in this computer.

  • IPod touch will not Sync to my new Computer

    Recently I have got a new computer, and when I upgraded to Windows 7 decided to move my music from my laptop to the new computer.
    After transferring all my music to my new computer, I then plugged in my iPod, and tried to Sync it to this. First of all it said it was synced to another computer, and asked if I wanted to transfer purchases across. After selecting this option, after 20secs it failed with an unknown error, and same when I repeated this a couple more times.
    So I decided to restored the iPod using the 'Restore' option in iTunes. After this was completed and the iPod was like new, I tried to sync again, and every time i try this, it comes up with various unknown errors to do with missing files, and just inability to sync, so I'm stuck without any music on it.
    Has anyone got any suggestions before I resort to going to an Apple store, as it's over a 2 hour journey away.
    Ps, I'm on Windows 7 64-bit, ask if want anymore details about my system if that will help
    Thanks in advance,
    Dom
    Message was edited by: Domolordy

    The Motherboard is Gigabyte P55-UD3
    That's perfect, thanks Dom. The P55 chipsets are associated with iPhone/iTouch syncing errors on Windows 7 systems ... -6999, 0xE0000065 and "disk could not be read or written to" are probably the most common. So I think we'd better get those issues off the table first.
    A number of Gigabyte-motherboard owners are reporting relief via BIOS updates (although I don't have a good feel at this stage which of the particular boards have available updates that help with this set of problems). So the first thing to do would be to head to Gigabyte to check to see if they have newer versions of the BIOS, and/or newer versions of the chipset drivers available for your UD3:
    http://www.gigabyte.com.tw/Support/Default.aspx
    If no joy there, another workaround that has been helping for people is the BIOS configuaration change described in the following post:
    http://discussions.apple.com/thread.jspa?messageID=10641649&#10641649
    Are either of those measures of any help?

  • "Synching" with new computer and maintaining playlists

    I bought a new iMac in July, but continued to synch my iPhone4 with my older MacBook.  I would like to switch over to synching with the iMac, but don't want to lose my playlists, music files, etc, which are currently stored on the iPhone.  Is there a way to pull the playlists off the phone into the iMac?  (All of my music files are on an external 2TB drive that synchs that is available to all macs in the house via my airport network.  The other issue, which is slightly related, is that the MacBook's iTunes library recently changed itself and forgot where it's library was. In choosing the correct library, a lot of my playlists were gone and some of the music was also gone.  The MacBook has 3 hard drives (one internal; 2 external that are always on), 2 of which are bootable.  Booting from a different drive still doesn't pull up the iTunes library as it occurred a month ago.  I tried pulling it out of Time Machine, but it didn't work.  So, synching with the MacBook is also impossible, since again, my iPhone playlists will be erased.  So, how can I pull the music & playlists off of the iPhone before synching with the new computer? (I should reiterate that I am not in danger of losing the music, since it's all on the external music-server drive, but the playlists will all disappear.)

    I never got a reply to this, but today, downloaded the App called PhoneView, which appears to do nearly everything I needed. Pretty cool.  Apple, I really wish you would make it easier to pull data and apps off an iPhone when synching with a new Mac.

Maybe you are looking for

  • Trying to link VC++ and CVI

    I have a VC++ application that uses CVI components. It links fine when VC++ is in debug mode, but when I change to Release mode I get link errors. C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\mbstring.h(117) : error C2375: 'CVI__mbsbtype' :

  • Connecting Serial Garmin GPS to iMac Intel

    I was wondering if anyone has connected a Serial port cable GPS from Garmin to an iMac Intel using a USB to RS232 converter cable. I have a GPSmap 76S from Garmin and have not been able to get Google Earth or LoadmyTrack programs recognize the GPS. I

  • After Install windows 7 audio disappear

    guys..help me please i have problem with my audio.. why my macbook dont have sound? i already install bootcamp driver,all driver can work properly only my audio doesnt work.. what should i do guys?? please help mee.. :'( because accidential i remove

  • Sync with P990i

    Hi all! I'm new to this forum. I'm considering switching from Windows to Mac but there are still some open questions for me... One is the missing possibility to sync my SonyEricsson P990 and Mac. Does somebody know about a possible future solution fo

  • Maintenance Plan with Counter

    Dear All, I have the following requirement, would be of great help if you can help me get the solution: Their is a pump which is to be maintained. The orders need to be generated on the basis of two parameters: 1. Number of hours the pump has ran. Th