4th Generation Ipod Syncing problem

I just got a used 4th Generation 20gb. I have downloaded the latest version of iTunes. Here is the error I keep getting "The ipod is synced with another itunes library. An ipod can synced with only one iTunes library at a time. What would you like to do?" What do I need to do to sync the songs that are already on the ipod to my iTunes? There are over 600 songs on the ipod but I want to be able to delete some and keep the rest. Any recommendations?
Thanks,
Craig

Hi Craig!
When you get this message, please be sure to click on "Cancel", and NOT "Erase and Sync", or else this will delete all of the songs off your iPod that are not currently in your iTunes library.
After you've done that, you can use a third-party program to transfer your iPod's songs to your computer.
If you're on a PC, try using YamiPod.
-Kylene

Similar Messages

  • My 4th generation nano syncing problems gave me an error msg over 100  syncing problems where songs were "not authorized" on my computer. What does that mean and how do I get them onto my Nano????

    Help! My 4th Generation Ipod Nano won't sync all my songs. I backed-up my songs first, then formated and then restored back to my Ipod. Now it syncs and my ipod shows up in the sidebar, but I get an error message that over 100+ songs were not copied over due to "not being authorized to play on my computer."  I followed the directions to try to get those songs restored onto my Nano, but it's not working! Now what?
    Thank you,
    Cheryl W.
    Rancho Cucamonga, CA

    Are you sure you authorized the computer with the same iTunes account used to make those iTunes purchases?  Perhaps this article can help.
    http://support.apple.com/kb/TS1389
    If nothing else try these steps.
    Deauthorize the computer and log out of the iTunes store.  Then close out of iTunes and reboot your computer.  Then open up iTunes, log into the iTunes store and reauthorize the computer.
    B-rock

  • First Generation iPod Syncing Problem

    Hello,
    My first generation iPod battery died a while ago, but I use it in a sound dock. I recently decided to change the music on there but when I try to sync it with iTunes, sometimes it says it can't update because the playlists no longer exist and sometimes I just get an error message from Windows saying I have a USB device which is not working properly.
    Any thoughts ?
    Message was edited by: Steve-Dave

    yeah this just started happening to me too for some reason. I figured out how to fix it by reading other posts, you have to right click on the playlist, edit playlist, click + to add another rule, select "playlist" "is" "music". then re-sync. sounds more complicated than it is, but it fixed mine.

  • Ipod Touch 4th Generation will Sync but Ipod Touch  3rd Wont

    i dont know why. but My Ipod touch 3rd generation wont be detected by any of my computers. While my ipod 4th generation has no problems. i already tried resetting my ipod 3rd gen alot of times. still no luck. anyone know what to do

    If I go from 'Devices' to Summary and then Music, I only get one option-Sync Music,There is a box on this page but the options within it are grayed out. If I tick the Sync Music option I get this message-
    'Are you sure you want to remove existing music,films,ect, from this ipod and sync with this itunes library?
    'Music synced to (my ipods name) from other itunes libraries will be removed and items will be synced from this itunes library' I have only ever used itunes on this PC and the 'Manually manage music and videos' is ticked but
    that must be a default setting as I haven't ticked it.

  • IPod Touch 4th Generation wont sync with iTunes on Windows 7

    Ok. I am going to make this quick. I just bought a new ipod off amazon from Apple. its a 35Gb 4th Generation ipod touch. I am able to sync my itunes library sometimes. Only SOMETIMES. I have about 1200 song on it now. But evertime i plug my ipod into my PC. iTunes comes up, but freezes up. itunes works fine when the ipod is not connected, but when it is, it freezes up. I can leave it for about 5 minuets and it will unfreeze and i will be able to use itnes, but itunes wont show my ipod is connected. AT ALL. I did the diagnostic, but that freezes up to. Only sometimes will it sync. I updated to the latest version. I think this is either a issue with itunes or the ipod. because my brother has the new nano, and his syncs perfectly fine everytime. Only on my account on windows 7 with MY $300.00 ipod touch will it not work. Anyone help me out here.
    This is what i have done so far:
    Reset ipod via sleep wake and home key while connected < no fix
    Ended any process in the background of windows, that may affect itunes < No fix
    updated to latest itunes version and ipod version < No fix
    That's all i could think of. This evidently is sync issue.
    ANY HELP?

    I would try these:
    http://support.apple.com/kb/TS1495
    http://support.apple.com/kb/TS1538

  • My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    Sorry i mistakenly made this question. It was alright. No Problem At ALL

  • Having problems with 4th generation iPod Nano. Desperate.

    I'm having this problem with my 4th generation iPod Nano. Whenever the iPod is connected to iTunes I get message saying "iTunes cannot read the contents of the iPod “IPOD”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings." However, I have music on the iPod that is purchased through different accounts on different computers (some of which are no longer existent) meaning I can't afford to restore and lose my music. Is there any way I can recover my music without having to restore the iPod?

    sorry, 5th gen. 30gb w video

  • HT4539 My 8gig 4th generation Ipod wont download Icloud , whats the problem?

    My 8gig 4th generation Ipod wont download Icloud , whats the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

    I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
    "The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
    I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
    Any advice very much appreciated.
    Thank you
    UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Why is my 4th generation ipod touch not charge? I plug it into the computer and the wall and with 2 different usb cables and its not charging. When its plugged in it shows the icon for charging but the battery never increases and it dies once i disconnect

    I have a 4th generation Ipod Touch. It has been working for months when yesterday the battery started acting werid. I was driving and it was connected with the usb charger cable to my car stereo when all the sudden my music stopped and the stereo could not recognize my ipod at all. When I got back home, I tried to charge it so it wouldnt die but even while on the charger in the wall the battery continued to die. I charged it over night (the first time I have ever charged it over night) desperately to have battery for a 4 o clock plane flight so I would have entertianment. The ipod died over night while on the charger. When I unplugged it from the usb charging cable I noticed that the icon telling me the ipod needed to be charged came up. So I plugged it back in. The charging thunder bolt symbol popped up next to the very small red strip on the left side of the battery indicating that the ipod had no charge to turn its self on. I tried plugging it in on the computer, the wall ac charger and a stereo system made just for the ipod that also pluggs into the wall. I have used 2 different cables, the result being the same that the ipod held no charge, and it wouldnt charge at all while on the charger, and it would imediately die once i take it off the charger.
    I have not idea what has happened ....
    Please help
    THanks!

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • Ipod syncing problems...?

    Im having several ipod syncing problems. I have an Ipod touch, 4th gen with the standard USB cable that comes with to charge it and sync it with. Today, i plugged it into my computer like normal to sync some new songs onto it from itunes. But, it started acting up. First, it kept syncing on and off, and the sync sound wouldnt stop- it wouldnt stay synced. then, later, when it finally did, not long after it said "this device does not support charging," and itunes didnt recognize my ipod anymore, so i couldnt sync my songs. is there any way i can fix this? thanks in advance.

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • HT1655 My computer is not recognizing my 4th generation Ipod shuffle

    My computer is not recognizing my new 4th generation IPOD Shuffle

    I had the same problem then I discovered I was not pushing the Jack in fully. Once I did this it suddenly became successfully recognised. (Only took me 4 hours of trying to realise what I was doing wrong) Hope this helps.

  • My friend asked me to load some of my music to his 1st generation ipod from my 4th generation ipod - do i need to have the older software to do this?

    My friend asked me if I would help him out buy sharing my extensive music collection with him.  He mailed me his ipod it is running version 3.1.3 (7E18) I believe it is an ipod 1st generation.  I am running version 4.3.5 (8L1) on a 4th generation ipod.  Am I going to have to download the older version for his ipod in order to have full access to it?  Also, I connected his ipod to my computer and was able to access his music library (by opening a new account on computer); however, his apps are all over the place and I was attempting to organize them, but was unable to acces the apps.  The apps appear to be locked.  What gives?

    You can only sync to one computer, unless it is set to manual. The easiest way is to have the music in his library at any rate.
    If it is purchased music it is tied to your account and would need to be authorized to play on other computers, I wouldn't advise going that route.

  • Error message when restoring my 4th generation iPod touch

    I own a 4th generation iPod touch. Eventually the device it self became slow. So there fore I tried to restore it. But unfortunately, the process failed. I tried this method several times and It gives an error message every time when start the process. The device is now in recovery mode. The iTunes version I have is 10.0.1.26. The device contain the latest version of iOS 6 update.
    The following is the error message:
    [ "The iPod "iPod can not restored at this time because the iPod
    software update server could not be contacted or is temporareily
    unavailable.
    Please try again later." ].

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • My 4th generation ipod touch is not being recognized on my computer ?

    My 4th generation ipod touch is not being recognized on my computer what do i do ?

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • CS5 doesn't offer basic audio functionality (playback stops on page turn)

    I would like to place a sound file and in the exported pdf have the sound file play (via button or playback toolbar), without stopping on page turn. To me, this is a very basic function to ask for. But guess what? CS5 can't do it. Turn the page and t

  • How to open km document in same window

    Hello all, When working with KM Navigation iView such as AdminExplorer, I need to open a document in the same window or IFrame. I can't seem to find a way of doing so. The document always pop-ups. Can anybody help? Haguy Message was edited by: Haguy

  • Schedule A Report - OIUOW01_SCH_A

    When I try to print or view a report the output is shown with a comma instead of a period in decimal interest (ie 0,01373291 instead of 0.01373291). I have looked at different configuration settings but have not solved the problem. Thanks very much!

  • Table name for the Qualification Catalog

    Can pls someone share, what is the table name, I can look up for all Q and QK?

  • I've rebooted both my phone and computer and iTunes 12.0.1 still won't let me sync

    I have a iPhone 5s currently and i just updated my iTunes to 12.0.1 and it will not let me sync so i rebooted my phone and my computer as told on the internet and it still won't let me sync or recognize my iPhone.. please help!