4x3 format SD tape import looks ok on monitor , but, the DVD produced does not display correctly ? The format looks slightly thinner in width?

I have been archiving old Hi- 8 SD tape and when displayed on the PC monitor looks right. And looks correct on a TV Monitor.
But, the DVD when produced looks right on a TV monitor but, thinner when imported back as a DVD into Adobe Premiere Pro , how can I adjust this ? I know a 1,000pixels instead of 720 would fix the issue, i have checked it in Photoshop.
I have others that need extra editing, as the previous Sequences have been removed from the computer ?

usually this is caused by pixel aspect ratio. premiere usually reads it properly, but if it doesn't you can change it to a new value. in the project bin, right click the file(s) and choose modify, interpret footage. there is an option for pixel aspect ratio, you can try some till one looks right. the 1.21 or 1.45 might do what you are looking for...

Similar Messages

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

A pdf file is converted to word. Then the word file does not take normal word formatting. Why?

Having trouble making the converted pdf to word file work properly under word commands and formatting that have worked for me
well in the past.
Please help.

Hi filesneedtowork,
If you're seeing some jumpy text, or having trouble clicking in where you want, it could be a font issue that's cauing problems.
Try choosing Edit > Select All, then Edit > Copy. Paste the entire contents into either a new Notepad file. Then repeat the same steps from within Notepad and paste the text into a new Word document.
Let us know how it goes.
Thanks,
David

My iPhone 4 is only 14 months old over dropped very well looke after, one day the lock button stops then the volume buttons, now the headphone port does not work and the battery lasts about 4 hours after full charge I still have a year left on my contract

My phone is 2 months out of warranty, it's never been dropped or miss used yet the past week every day something has gone wrong with it. First the lock button stopped then the side volume buttons. Then the head phone port when I putt headphones in the phone turns the volume
Down automatically and it won't turn up until I take my headphones back out. The battery lasts 4 hours max after a full charge and today I took my phone off the docking charger and all my music has gone! The phone is breaking down more and more everyday what is going on! I know people who have had there iPhones years an non of this happen! I still have a year left on my contract too!

Who is your carrier and what is your coverage with them? If you are with say Verizon, and have Total Equipment Coverage or Extended Coverage, they will swap it out for you under Manufacturer Warrantee.

Key figure is not displaying correct data format

Hi SAP Guru,
I am facing this issue while checking query output.
Please find the below example:
Actual Value in Infocube :
506,934,567,522,159,433,380.99
Bex Report Output:
506,934,567,522,159,000,000.00
Please provide your suggestion what can we do to correct the data output in reporting layer.
Thanks
Priyanka

Setting is similar like this only .... Actually Data after decimal is not an issue the main problem is that before decimal data is coming in Zero form eg.
Actual Value in Infocube :
506,934,567,522,159,433,380.99
Bex Report Output:
506,934,567,522,159,000,000.00
Before decimal last 6 digits

Unicode format does not display correctly.

I had written a program in JAVA (functions like a wordpad), and it can interprete ASCII and Unicode correctly. But when I pass the program to my friend, the program cannot interprete the Unicode section correctly....
There are 3 main questions in my mind now.
1) Is it that different Java versions analyse Unicode differently?
2) why is it that my 'java plugin' in control panel is displayed in Chinese and my colegue's computer is showing it in English?
3) Is this due to the different language enviroment settings that is causing this problem?

I had written a program in JAVA (functions like a
wordpad), and it can interprete ASCII and Unicode
correctly. But when I pass the program to my friend,
the program cannot interprete the Unicode section
correctly....That may be due to the difference of the system default
encoding., which is based on the locale, on your machine
and on your friend's machine. His/her default encoding
might be ISO-8859-1.
>
There are 3 main questions in my mind now.
1) Is it that different Java versions analyse Unicode
differently?No.
>
2) why is it that my 'java plugin' in control panel
is displayed in Chinese and my colegue's computer is
showing it in English?System locale issue.
>
3) Is this due to the different language enviroment
settings that is causing this problem?Yes.
String class and some of java.io classes have constructors and/or
methods that takes charset argument. You can use them for different
encodings.

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

I've been using FCP 7 on my iMac for quite some time with great success. Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

HT1267 IPhone4..Model MC603C/Ser#850441XGXA4S: I have update to 5.1.1. I am not alerted to my emails unless I tap on the mail app. Then the alert/banner appears. When I start up, the alert sounds but after that it does not work. Whats wrong?

Ever since I updating my IPhone 4 to 5.1.1. my alert/banner does not work with my mail app. Initial startup it works but after that, it does
not work. The only way I know there is a message by tapping on the mail app and then I hear the alert and the banner shows up. Prior
to updating, it always worked. Is there a 'bug' in the system or is there something I am missing here.

Yeah this was my first time connecting my phone to the computer since I went to iOS 5.0 and iCloud, so I wasn't familiar with the fact that it did not automatically create a backup on iTunes during the Sync process. Should have right-clicked on the phone device and did a manual backup.
But still, after restoring the backup from iCloud, I don't understand why data from certain apps got hosed (anything before October 2011, which was my last iTunes backup), while other apps' data appears to be fully intact.

Date Format was not displayed correctly

Hi All,
        We are developing WebDynpro Application successfully....but the date format was not displayed correctly.
the RFC Date format is : 05/23/2007
but in webdynpro we are getting date is wrong....we are getting date is : 09/05/2008.
the below one is our coding for date display format.....
public java.lang.String DisplayingDateFormat( java.lang.String date )
    //@@begin DisplayingDateFormat()
                    // Current date Format in BW
SimpleDateFormat sdf = new SimpleDateFormat("MM.dd.yyyy");
String ChangedDateFormat=null;
try{
//Parsing String to Date
Date sqlDate =sdf.parse(date);
Locale userLocale=WDClientUser.getCurrentUser().getLocale();
DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.DEFAULT, userLocale);
//Converting Date to String
String newDateString = dateFormat.format(sqlDate);
ChangedDateFormat=newDateString;
I mention my user country is Germany.
can u tell me any one why we are getting wrong date.....
Really i appreciate.
Thanks and Regards,
Abhiram.

Too bad you can not offer yourself points. LOL

Error: Imported bank file format does not correspond to selected format

Hi All,
I am trying to execute FF.5 transaction - Import Electronic Bank Statement - for brazilian bank (Banco do Brasil) but I got an error message no. 8B795 (Imported bank file format does not correspond to selected format), I tried format B (Cobrança/pagar itau) and 1 (Cobrança/pagar bradesco).
The file that I am trying to upload has 400 positions.
Does anyone know which format I should to use?
Regards,
Daniel

Hello,
In my case our bank was sending us a file using the version 085, while we were waiting for one of those: 030, 040, 050, 084 or 087.
Now they will send these files using the version 087.
Thank you!
Caio.

Pages document "could not be read" bc. it "does not have a valid format"

The document in question was properly saved and Pages was not open when my computer hung as it was shutting down. MS Word would not quit or force-quit and I had to hard restart the computer. When I later tried to open this Pages document, which I had been working on before Word froze, Page would not open it and responded with the error message: "This document "document_name.pages" could not be read. This document does not have a valid format." When I looked at the document in question I noticed that its file size was 0KB. I have no idea why this happened, but I suppose it has to do with my computer not shutting down properly and perhaps with Word freezing. If I repair my drive permission, re-index it, anything, will it help? Just a note on the status of this machine: spotlight stopped working earlier this morning and I was waiting to finish this document before repairing disk permissions and trying to fix that issue with Spotlight.
In the meantime I have tried various fixes. First I tried to change the file ending to .zip, unpack it and open it. Then the same, but this time I tried to view package contents. It doesn't show up in the contextual menu as even having a package to show the contents of. The file is effectively empty, but I don't know where the contents went! The funny thing is that the MS Word doc was recovered automatically. Is it possible that Pages doesn't have an auto-recovery mechanism?
I need this file urgently, or at least the text in it. It is the bibliography of an important paper due tomorrow at 5 pm.Any advice or suggestions would be greatly appreciated.
BTW, I have used a file-recovery program in the past. It is called "Stellar Phoenix" and it worked wonderfully to find a Word doc that I accidentally deleted. It can't find .pages document though. In order to do so, I would need to tell the program what the average file size is, as well as the header information as follows. "Header (in hexadecimal)" "At Offset (in decimal)". I have no idea what this means, but if I could insert it, perhaps it could find the lost data. Should I have it search for .pages, .zip, .xml? I'm at a loss, but I know that it doesn't recognize .pages. In the meantime, I sent a support email to them and will see what happens.
Thank you for your help.
David

I can't respond before.
When the system say that your file size is 0KB, it means that nothing was saved. Only a file descripto exists.
So, there is nothing to recover.
Given the time the system crashed, you may have :
(1) a simple descriptor with nothing written
(2) a folder with every or only some of the required files.
In this case, Phoenix is useless : it's unable to revive a folder.
(3) a flatfile (a compressed version of the folder named above). It's only this kind of file which Phoenix may revive.
With a bit of luck, Phoenix would be able to revive the index.xml file which was in the original folder created in the temporary folder.
This file starts with :
<?xml version="1.0"?><sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
or
<?xml version="1.0"?>
<sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
The minimal size for a Pages index.xml file is : 520038 bytes.
If you retrieve the index.xml file, we may try to rebuild an usable package.
Ask the recovery tool to transfer the recovered file on an other media.
If the document embedded pictures, the index will give their path and their size which may be useful to recover them.
Yvan KOENIG (VALLAURIS, France) lundi 1 novembre 2010 10:27:44

Need help in formatting the Date - Date does not

Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
--- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
(r.formdate, 'DD-MON-YYYY'),12) "formdate2"
from table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
Edited by: Lucy Discover on Jul 7, 2011 1:05 PM

Your syntax is wrong - look at the post above where this syntax is given:
to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
take formdate, add 12 months
add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
to_char(date, 'MM/DD/YYYY')Compare to your syntax:
to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
Good luck!

Object in import-file header does not correspond to the migration object

Hi Forum,
I have loaded Business partner successfully with the file created in Workbench with test data.
Now I want to load the data from Application server. But i am getting the error
"Object in import-file header does not correspond to the migration object".
I have read that the import file should have 3 types of record
1. Header record corrs to the structure TEMINFO
2. Actual data records
3. Final record for individual object.
I am not sure where I am making a mistake
my files header looks like
<004F><Space><&INFO><Company><Migration Object><User><Date><Time>
Please help.
Thanks in advance

I am assuming you are in transaction EMIGIMP loading a converted migration file for import, correct?
If so, you should be able to read the company, mig. object, user name, etc. in the import file tab overview. If conversion did not work correctly, this info will not display here.
It is possible you are missing some data in the header, or spacing is not correct. Are you converting the input file with program REMIG_FILE_TRANSFORM or are you trying to create the migration file yourself?

4x3 format SD tape import looks ok on monitor , but, the DVD produced does not display correctly ? The format looks slightly thinner in width?

Similar Messages

Maybe you are looking for