5.0.2 I'm having trouble copying and pasting blocks of 10+ clips so that...

I have 10+ overlapping clips which, when I try to copy and paste to reuse later in the movie don't paste in the same order or even in the same general spot in the movie. Basically, I have to first go searching for the pasted pieces and then try to put them together all over again. It seems like there must be an easier way.
This is for a music video and i'm working ONLY with audio (all video has been deleted), which, as i said is very much overlapping.

Your only choice at this point is to use a machine running 10.3.9 at the latest.
Even the you will need to resort the audio.
W1

Similar Messages

  • Having Trouble Copy and Pasteing Local Variable in LabVIEW 2010

    I am Having Trouble Copy and Pasteing Local Variable in LabVIEW 2010 in s subVI.
    I have a VI that has a Local Variable called "Node Addr". I can select it OK, and it appears to Copy OK, But when I go to paste it, nothing appears. It doesn't matter if I use Cntrl-C Cntrl-V or the Copy and Paste from the Edit menu, I get the same results. I tried many times and got the same results. I made sure that I had click a paste location. I can insert the Local Variable if I use the Data Communication panel.
    On one of the Paste, I got an error in the error list that said that a Local Variable was not connected to anything. When I clicked on the error, it took me to an insible item in the lower right corner of the block diagram that had nothing but a select box around it. I couldn't select the invisible item, but I could delete it.
    Why does the copy and paste of this local variable not work?
    Why does the paste cause the insertion of an invisible item?

    dbaechtel wrote:
     My VI is fairly complicated. In several places in the VI, I am either reading or writing to this variable which is an numeric Indicator on the Front Panel. Using local variables seems to be the best way to handle this situation rather that using wiring all over the VI. Since the VI is mainly a State Machine and there are only 2 Writes to the local variable, I am not afraid of race conditions in this case.  NO!! While you may think that using Locals is your solution to wiring, it is not!  The fact that you are writing and reading, most likely from several places, will most definitely contribute to a race condition.  Depending on your implemetation, you should ALWAYS use wires.  The wires are the variable.  If you are using a loop (While, For), then using shift registers are appropriate means for routing values so that they are used by other sections of the code, later.  One thing you must respect with LabVIEW is the dataflow.  That's where Locals often fail.
    I am not copying the Local Variable from one VI to another.
    I am not copying the Local Variable from one VI to another.
    The Data Communication panel is one of the panels that shows up in the Functions pop up list when editing the Block Diagram. It is the panel that includes the Local Variable function.
    I don't know if the invisible item that was inserted in my block diagram was hidden or not. All I know is that the Errors List said that it was a Local Variable and that it was not connected to anything. I couldn't select it to get more information. All I could do was delete it.
    You did not address my questions about why the Copy and Paste does not work properly for my Local Variable.  Maybe it's a sign from the Software Gods not to use them LOL!..
    So if I understand correctly, you are trying to copy & paste the Local Variable from within the same VI.  How large is your block diagram?  Did you try right-click on the variable and select "Find > Local Variables"?  If it's a block diagram larger than 1 single screen (which it shouldn't), then it is possible that the Local is hiding beyond the screen.  You should find it as I described earlier.
    See my comments in red above.

  • I am having trouble copying and pasting.

    Once I have sent a copied item it reappears when I am wanting to select a new copied item. I am mailing on hotmail. Also, it does not always paste/ appear at the other end.

    Unless you want the whole screen, why not use the Snipping tool? It's great!
    Anyway, regarding the clipboard problem try Edit > Purge> Clipboard before you capture what you want.

  • Having problems copying and pasting

    Just upgraded to 10.9.3 - having trouble copying and pasting. Hard to highlight text.

    Thank you for responding. I am copying content officially from travel destination out hotel websites and pasting descriptive copy into Word 2007 to write a Press release. If in a, Press release there are links I need to research to make sure they are correct, copying and pasting the url from word to firefox doesn't work. I have to copy and paste into wordpad and then copy to word. huge pain. thanks for the help

  • I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

    I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

    You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

  • It's currently taking me ages to send multiple emails as I'm having to copy and paste the email each time. Does anyone know if there is a way that I can send the same email several times but that can be addressed (Dear....) to different people?

    It's currently taking me ages to send multiple emails as I'm having to copy and paste the email each time. Does anyone know if there is a way that I can send the same email several times but that can be addressed (Dear....) to different people?

    Oh at least just duplicate the same email several times so all I will be maunally inserting each time will be the address/name??? Please help!!!

  • How do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    how do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    Zip (compress) the folder before you send it.

  • Why can't I copy and paste portions of the Word document that I just converted from a PDF file?

    Why can't I copy and paste portions of the Word document that I just had converted from a PDF file on your site?

    Hi,
    I am moving your posting to Adobe CreatePDF forum.
    Hisami

  • My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    Have you tried accessing the email from another computer, device, email client or web browser?

  • Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste

    Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste

    I looked at Bento and at first glance I think it would do everything I want it to do, then I saw a review or something from a customer that indicated the information in Bento could not be exported (say to send out a mailing).  I may want a program that can do that as well, is there one out there? If not it does look like Bento will work.  When you save a picture to a customer in Bento can you open it up full size?

  • Having problems copying and pasting in Photoshop CS5

    Hi,
    I'm running Photoshop CS5 on my laptop (Win 7) and desktop (Win 8).
    When I have three documents open and open a New one, I can't get the others to copy and paste by keys or menus...not even by dragging to the new document.
    Same thing happens in both version of Windows. The images are all jpgs, RGB, 8 bit.
    Also, sometimes when I create a New doc, one of the other images suddenly disappear.
    Any ideas what's going on here?
    Thanks in advance for any advice you can offer.
    Biff

    You probably simply crash your graphics acceleration by exhausting all resources. Turn off openGL in the prefs and/or update your graphics driver.
    Mylenium

  • How can I copy and paste a caption for several pictures that are all the same?

    I'm trying to understand the process of importing, labeling and organizing pictures I'm importing from my iPhone into iPhoto 11.
    So far I am importing only pictures that relate to one another; ie taken at the same event.  I have 18 pictures from one hike.  I'd like to label each of those pictures the same; ie "hike at Bear Creak 2/15."  Can I copy and paste the same label to all 18 pictures?  How would I copy and paste?
    There are lots of You Tube videos on the subject of iPhoto and that's how I learn best.  If you know of a really basic one to watch I'd appreciate it. 
    I think I have to take a class at the Apple Store on this basic organizing because it's really escaped me in the 9 months I've had this Mac (switched from PC.)
    Thanks,
    Ginny

      I have 18 pictures from one hike.  I'd like to label each of those pictures the same; ie "hike at Bear Creak 2/15."  Can I copy and paste the same label to all 18 pictures?  How would I copy and paste?
    Ginny,
    select all 18 photos at once in iPhoto on your Mac and then use the menu entry "Photos > Batch Change"
    That will change the titles or descriptions of all photos at once.
    -- Léonie

  • Copy and paste contents of dashboard clip ?

    Is there a way to copy and paste the contents of a dashboard clip, e.g. into an email?

    Yes, I mean a selection of a page in a dashboard widget. I find if I click on it, it doesn't open in Safari. I did find that by clicking a word, a line, or a paragraph will highlight, and I can then copy and paste that. You can also use cmd-a to select all, and then the whole page which the selection came from will highlight and then can be c&p'ed. But, since trying to drag to highlight just a few lines results in moving the whole window, you can't c&p precisely, as with an ordinary page.
    But I wonder what you do to get it to open in Safari.

  • Trouble Copying and pasting a movie clip from another flash scene

    Hello,
    I have been trying to copy a movie clip from the library of one flash and paste it into the library of another.  But when I do this, it always gives me, "One or more library items already exist in the document.
    I have tried finding and renaming those items, renaming the existing movie clip, and even changing it into a graphic instead.  Still it always replaces these certain movie clips in my main flash file.
    I even tried the following:
    Creating a new movie clip in the new file.  Then going into the movie clip of the other file I wish to copy over, and trying to copy its frames and put it into the new movie clip i created in the main file.  Even then, it says I'm replacing library items!
    Can someone help me?
    Thanks

    The easiest way to be sure you are renaming everything is to probably to copy the movieclip into a new empty file's library and then rename each symbol in there.  Unless I am missing something, when you do that, each isolatable symbol inside that movieclip will appear as a separate symbol in the library, making it easier to be sure you have renamed them all.

  • The send link is not working. I get taken to my Outlook inbox where a message is displayed 'navigation to the webpage is cancelled'. Any ideas on how to fix this? It's driving me mad having to copy and paste the link rather than clicking on 'send to'!

    I am using Outlook 2010 and I have set this as default. Furthermore, this does not seem to be recognised by Windows XP as it is not listed in IE8 options, programs drop down list. Very strange. Had no problems previously with Outlook Express.

    I am using Outlook 2010 and I have set this as default. Furthermore, this does not seem to be recognised by Windows XP as it is not listed in IE8 options, programs drop down list. Very strange. Had no problems previously with Outlook Express.

Maybe you are looking for

  • Where is com/sap/security/core/server/secstorefs/SecStoreFS?

    Hi, I am trying to create a Java client in NWDS that retrieves a DataSource object via JNDI from my XI 3.0 system. I have added the jars I could think of (connector.jar, jta.jar, sapj2eeclient.jar, sapopensta.jar, etc.) to my build path. When I attem

  • How do I update from Mac OS X 10.6.8  to Mac OS X 10.7.3 or later?

    I recently purchased and tried to install Quickbooks 2013 on my iMac. During installation I received a popup stating that I have Mac OS X 10.6.8 and the application requires Mac OS X 10.7.3 or later. Please advise what update I should download or pur

  • Silhouettes in "Shared" folder

    I can't figure out how to use the Silhouettes found in the "Shared" folder. I'd like to use this shape as an object in a project, but can't get rid of the "number in a movie frame" icon. Is this simply meant to be a "place holder" like the other "Rep

  • "package" ARD and VNC client settings?

    Hi- I work in a school, and manage @ 1,100 student iBooks. I'm trying to figure out how to create a package that performs the same functions as the "Change Client Settings" feature under the "Manage" Menu. We use external HD's to reimage the computer

  • I can't ever close my emails properly I have to force close every time. Does anyone know whats wrong?

    Date/Time:       2012-10-01 17:49:55 +0100 OS Version:      10.7.5 (Build 11G56) Architecture:    x86_64 Report Version:  9 Command:         Mail Path:            /Applications/Mail.app/Contents/MacOS/Mail Version:         5.3 (1283) Build Version: